Can'f format hard disks with a PM8M3-V board

Hello,
Recentl i tried formatting my old pc (P4, PM8M3-V board).
When i enter my windows disk to the cd-rom, it won't recognize any of my two hard disks, Though almost anything else will recognize them (like partition magic, and other PC's). I can format the HD on another pc, and i have. After formatted, i installed the HD back at thePM8M3-V computer. The computer boots up, and reaches the windows logo screen, and then it restarts and starts this whole proccess again. Also, as it seems, a RAID is configured, since a raid screen is appearing after the initial POST scree, but i could not set it off. I searched for a bit and found out that this:
Quote
Integrated Peripherals -> IDE Devices -> SATA Rom Select = [IDE][RAID]
But the SATA Rom Select line does not appear!
Please, help me find the problem. Thanks in advanced...

If you want to reset everything including RAID, you can clear CMOS when the system is powered off by removing the board's battery for 10 secs and placing it back. Once done, power up the system and BIOS is reset.

Similar Messages

Can I change hard disk with SSD drive in Toshiba NB100?

Can I change hard disk with SSD drive in Toshiba NB100 ?
The Hard disc in this model is same size as SSD 2.5" drive?

Hi
As mentioned above: the SATA controller is supported so you will need to use a SATA SSD drive usually it should not be a big problem to upgrade the notebook with an SSD drive in some cases it could be possible that the SSD firmware needs to be updated but this depends on the SSD drive manufacturer
However, the SSD drive is much faster than a common HDD. Therefore you should notice a faster performance

Cd/dvd drive not found, can I format hard drive with an external cd/dvd drive. If so how?

My cd/dvd drive quit working and is not found in device manager so I purchased an external cd/dvd rw. Now I am having other issues with installing software and windows updates so I would like to format hard drive. Can this be done with external cd drive, if so how do I boot from it? presario v6000 laptop windows vista 32bit os.

Restart the notebook >> start tapping F10 key >> go to configuration menu >> Boot Order >> select the Ext DVD drive as 1st boot device >> save and exit >> Insert the recovery disc >> restart the PC >> press any key when prompted >> follow the instructions..
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Dual Boot Windows 7 with preinstalled Windows 8 on GPT-formatted hard disk and UEFI BIOS.

Question for Jordon Wees,
Hi,
You wrote: I can successfully install both operating
systems in UEFI mode, with Windows 7 on the first partition and Windows 8 on
the second partition. <o:p></o:p>
But I couldn´t!<o:p></o:p>
Could you please provide me how to install Windows 7
64 bit on a PC that already has Windows 8 64 bit preinstalled?<o:p></o:p>
I have also a GPT-formatted hard disk with UEFI BIOS
but I get the error message that windows can´t install Windows 7 on the disk
because it is a GPT-formatted hard disk.<o:p></o:p>
I don´t understand this because it is a GPT-formatted
hard disk with Windows 8 on it!<o:p></o:p>
I can´t change the hard disk to MBR format because I
will lose Widows 8 and all other partitions.<o:p></o:p>
In the BIOS for the storage dives Boot´ option I
selected the: only UEFI, I could also select the option ´first UEFI´ but it doesn´t
change the failure of installing Windows 7.<o:p></o:p>
Thanks, Sia

If I am reading your issue correctly. Windows 8 came pre-installed on a computer with a hard disk setup as a GPT with UEFI configured.
If this is the case then the outcome you are experiencing is correct.
Windows 7 does not inherently have the ability to install into a GPT disk from the base installation.
The Windows 7 DVD is designed to install using BIOS mode.
Also note that Windows 7 x86 does not support UEFI mode.
These two articles below may help you.
http://technet.microsoft.com/en-us/library/dd744321(WS.10).aspx
http://blogs.technet.com/b/askcore/archive/2011/05/31/installing-windows-7-on-uefi-based-computer.aspx
Thanks
Sean
MCTS: Windows 7
MCITP: Windows 7 Enterprise Administration
MCSA: Windows 7

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

My mac can't find the volume" Data" on Time Capsule. Also Ican't find with the disk utility program the hard disk in the Time Capule; so I can't format the disk again. What can I do?

My Mac can't find the volume " Data" on Time Capsule, Also I can't find with the disk-utility program the hard disk in the Time Capusule.
So I can't format the disk in the Time Capsule
Deconnevt and then connecting the power tp the Time Capsule gives also no solution.
What can I do?
Joe

I listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
In finder use top menu, go, connect to server.
Type in the following.
AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
If that fails..
try
SMB://TCname
Here is the screenshot.
tardis4 being the name of my TC.
It should then ask you for your credentials.
And it should remember them in the keychain and be able to then get TM to connect.

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to my laptop.

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.

You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.

Experience Formatting Gen5 Ipod Hard Disk with Fat 32?

Does anyone have any experience formatting a Gen 5 60gb for Windows hard disk with Fat32? I was thinking of doing this and then restoring from itunes 7.5 to start all over. If so, how did you do it? Thanks in advance. Running Win XP w/SP2

i reformatted my daughter's 5th gen. 30Gig thru 'my computer' but itunes still wont recognize it so i can't use the RESTORE on it. anyway, plug the usb in your ipod and wait for 'my computer' to recognize it then right click on it and and choose format.

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

How can I erase my hard disk with OS X 10.8.2?

How can I erase my hard disk with OS X 10.8.2?

If you want to erase the hard disk and reinstall OS X, follow these steps:
1. Back up your data to an external disk if you don't want to lose everything. When you erase a hard disk, everything is deleted.
2. Press Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
3. Select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
4. After erasing the disk, close Disk Utility and reinstall OS X, so OS X will be installed with factory settings.
Don't forget to install iLife applications after the installation, if you need them. They come in the Applications DVD (if your Mac came with Snow Leopard or older), or open App Store > Purchases and download them

Will external hard disk with firewire help me to back up my laptop using time machine?

Hi,
I have macbook pro from 2011 with 750GB hard disk and I try to back up my hard disk using time machine for the first time.
I used time machine before in the previous OSX versions but I had to format the external disk.
I have an external Western Digital hard disk with 3TB space. It has only usb connection.
When I try to backup all my data (650GB) the speed is 25GB per day, so it will take me about a month to backup my disk.
It's my work laptop, so I can't leave it for backup for more than 2-3 days.
I read a lot of forums and tried to see if the small speed is only at the beginning of the back up.
I also tried all the tricks with turning off the spotlight indexing and so on.
Nothing really helps, so my question is:
Is it going to help, if I buy an external disk with a firewire connection? Will I be able to backup my data in 2-3 days?
Thanks,
Arshavski Alexander

A Firewire drive would only be about twice as fast as USB 2, so you're still looking at 15 days. Something isn't right. I'm usinge FW800, and my my 1TB backs up overnight.
Take a look here and see if anything helps: http://pondini.org/TM/D2.html

Win XP Unable to format hard disk and install

Recently my system has got error about system hive error
"C:\windows\system32\config\sysem file missing"
So when I tried to reinstall the system the winxp setup says
unable to format my hard drive after I choose C Drive to Quick Format(NTFS) and install option,this note appears
"setup was unable to format drive c:the hard disk may be damaged
make sure the disk is on and properly connected to the computer .If the disk is a SCSI disk,make sure your SCSI devices are properly terminated.See your computer or SCSI adapter documentation for more info"
Thinking that the hard disk(Seagate Barracuda 160GB SATA) might have corrupted I used Seagate seatools to check for error and the test failed. So I replaced the hard disk with brand new WD 160GB SATA hard disk and started installing the winxp. Again I'm facing the same problem. Even I checked with the new connection port.
I'm using AMD Sempron Processor. MSI K9MM-V Motherboard. dynet 512MB RAM.
As the problem is existing even with the new hard disk I think there is no problem with the hard disk or cable. the problem must be something else.
Please help me find the problem and rectify it.
(My hard disk is SATA and No-RAID, No-SCSI, BIOS detects my hard disk and I'm able to create partitions but unable to format and install WinXP)
I've used the same hard disk on another system with MSI Mother Board but it's working fine. Windows XP installs without any problem. I've replaced the hard disk in which the Win XP already exists(Win XP installed on another system with same configuration MSI K9MM-V Mobo, AMD Sempron Processor, 512MB RAM) But it hangs the system and when I restart the system it says,
"Windows Could Not start because the following file is missing or currupt:
\Windows\System32\Config\System
You can attempt to repair this file by starting windows setup using the original setup CD-ROM. Select 'r' at the first screen to start repair."
I've tried this some 10-15 times every now and then this problem is popping up.
So I think this is not the problem with Hard Disk. It must be the problem with Mother Board. So please help me resolve this issue.

Good luck!
But please remember what you wrote: "BIOS detects my hard disk and I'm able to create partitions but unable to format and install WinXP",
and what Bas wrote about listing your system components.
Have a minimised system when you install Windows.
A cloned copy of Windows can do this, for example one that a back-up program made.

How can I format an HD with System 10.4 and install Leopard Snow?

How can I format an HD with System 10.4 and install Leopard Snow?

You need to partion the hard drive using Disk Utility. On one partition install 10.4. On the other 10.6. As a note I trust you are doing this on a MBP and not a PPC Mac because 10.6 won't install.

Connect external hard disk with iMovie

I bought a new external hard disk and would like to connect that with iMovie. The disk is formatted with Mac format. When I start iMove, I can see the hard disk appeared in the Event Library. However, I cannot move the file into it and there is a yellow triangle signal appeared. Would you please kindly advise how to deal with it? Many thanks!

Hi
The disk is formatted with Mac format.
Mac can open and use many different formatting's - but for Video only one works (as I know off)
• Video - Mac OS Extended (hfs) (journaled or not)
Not - UNIX/DOS/FAT32/Mac OS Exchange - works for much BUT NOT FOR VIDEO.
Else - there is a size problem too
I just bought a 2Tb HD and was not able to format it unless I partitioned it into smaller volumes - I think that about 750Gb is OK so I made 4x500Gb. Then it was formatted OK.
Yours Bengt W

Can'f format hard disks with a PM8M3-V board

Similar Messages

Maybe you are looking for