Can FB be used to build a complete ecommerce solution?

I am a designer and am learning to code AS3 but am a little inexperienced with backend development and programming. I want to build complete online stores using a Web 2.0 approach with the Flash/Flex protocol. Not sure how to proceed. I know of Cartweaver but that seems like an HTML based product. Can Flash Builder be used to set up a complete ecommerce solution including a shopping cart, cms, etc. without having to become an expert programmer? Please demystify. Much appreciated!

I don't see why it couldn't be...
There are ready-to-go ecommerce back end solutions available.
At that point all you have to do is create a front-end and send data to the backend which does all the processing.
So basically all you need to learn is the front-end stuff, and then figure out how you want to send that data to the back-end...
httpservice, webservice or remoteObject.

Similar Messages

  • Can't start using Extension Builder 2

    I've just buy Extension Builder 2, installed it and try to create a project in Flash Builder 4.6.
    But the moment I just prompt to login into my Adobe account, I just try it, a popup came up saying "just wait a moment" and then it closed and nothing happen. I'm not logged and I can't continue.
    Any idea what is happening? I can't wait to start using it.
    I'm on OSX 10.7.4.
    Thank you in advance.
    Any other way to report this problem?

    There was a bug found in the Adobe Store version of CS Extension Builder 2.0 which prevented users being able to log in. We have, with the help of our customers, been able to identify and resolve the bug. The affected customers have been sent a fix. CS Extension Builder 2.0 will be temporarily unavailable to buy from the Adobe Store until a new build of CS Extension Builder 2.0 containing the fix is posted. This is estimated to be within the next few days.
    A trial version of the software is available for any user wishing to use CS Extension Builder.  http://www.adobe.com/products/cs-extension-builder.html
    We sincerely apologise for any inconvenience caused to affected customers.

  • Suddenly my ethernet and firewall are no longer connected. router is good...and can connect only using wifi...suggestions?

    suddenly my ethernet and firewall are no longer connected. router is good...and can connect only using wifi...suggestions?

    SOLUTION! 
    I've been suffering from this problem for a few months.  I tried everything suggested by everyone, and then, today, I had a mad idea. 
    I used to work in a room in the house that's about 12 metres away from the router. It's on the next storey up and horizontally about 8 metres away.  The problem started when I began to work in the same room as the router. 
    Today I became so frustrated that for some reason I walked into a room about 8 metres away on the same level - Guess what?  I connected with no problem at all. Feeling full of joy I walked back to the room where the router is located - Dropped internet connection within a few minutes!  Walked back to the the room that's 8 metres away and, hey presto! I have a connection. I now realise that the problem was that I moved too close to the router.
    I can think of no logical explanation for my experience, but empirically it seems to work.  Does anyone have the faintest idea of why this should be the case?  In the absence of an answer I think I may have to start believing in fairies at the bottom of the garden - I'm just off to set a meal for them.
    By the way, I don't know if it has any significance, but the router is a BT Infinity router that has replaced the incredibly unreliable Virgin Media cable connection

  • How can I use cutom build icons in labview as a switch ?

    I have two questions:
    I am trying to make a user interface, using custom-build icons.
    -How can I load/copy my icons into labview?
    What would be the best sollution for the usibility of the icons:
    -should I try to use the icon as a new overlay for labviews excisting push-buttons?
    -or... make a shape(icon) a clickable item/button.
    Either way, I do not have a clue how to accomplish this task.
    Every comment on this item is appreciated.
    Kind regards,
    Ronald (The Netherlands)

    Hello Ronald,
    here is a link which does engage with this topic.
    http://zone.ni.com/reference/en-XX/help/lv/71/lvhelp/Impt_Graph_in_Bool_Contrl/
    Regards ThomasD

  • I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup and external storage as well?

    I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup as external storage as well for the files I don't need everyday?

    If you are using "Restore from Time Machine Backup" option from OS X Recovery, you can only choose from the broad categories presented.
    ... Can I also use my time machine backup as external storage as well for the files I don't need everyday?
    To be clear, if you are asking if you can use the volume containing your Time Machine backup to store additional, non-Time Machine files, the short answer is yes.
    It's not a good idea though, since the Time Machine backup will eventually fill all available space, after which it begins to remove old, "expired" backups to make room for newer ones. The presence of additional files doesn't change that fact, and Time Machine will not erase them, but you will encounter a dilemma should you want to store additional files on that volume when there is no remaining space. You will have to make room for them on your own, by deleting existing files. Furthermore, since Time Machine cannot back up its own volume, those additional files will not be backed up by Time Machine.
    The easy solution for what you describe is to purchase additional external storage. External USB hard disk drives have become very inexpensive; about $55 will buy a perfectly suitable 1 TB drive.
    You can also choose to replace your MacBook Air's internal storage with a larger capacity one. Look for a suitable replacement from OWC / MacSales:
    http://eshop.macsales.com/shop/SSD/OWC/Air-Retina
    That gets a little more expensive but it is the optimum solution.

  • Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotfo

    Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

    Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

  • Mail version 4.5(1084/1085) can't be use on Mac OS X 10.6.8(Build 10K549) ?  --- please help

    I just clicked software updated and after installed items that showed me to install - now mail won't work at all.  I get the following message, "You have Mail version 4.2 (1084/1085).  It can't be used on Mac OS X Version 10.6.8 (Build 10K549). For more information, click the Help button."  Help offers three suggested fixes, none of which have worked.  What more can I do to fix this problem?
    I also check that Mail.app is in the Application folder. So any suggestion would appreciate.
    Ps. should I try to re-install the Security Update (2012-004) .... if yes how can I do it?
    Many thanks in advance.
    Samm

    Try downloading these: Even if you already have this should not cause any issues.
    http://support.apple.com/kb/DL1399
    http://support.apple.com/kb/DL1678

  • Can I use action build to fade one table row as I move to the next row in the table?

    I have built a table with 6 rows.  Right now,I am building the table row by row when I play the slide. Is there a way to fade or dissolve one row when I move to the next row in the table? I want to be able to de-emphasize the row I just discussed when I move to the next row in the table. I can fade the entire table by invoking that action but I do not seem to be able to use this action one row at a time. Thanks for your comments and assistance.

    you will have to use a workaround to get the exact effect you described
    create a table with out any text
    use text tool to add text and position in each table cell
    select the text boxes( command click) in the first row and group them (arrange > group)
    use a, build in, to display text and then a, build out, to remove it
    repeat the above for the other rows

  • My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

    My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls  urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

    Hi there,
    Use the method described in the link below to get back up and running:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • Why can't I use/build an SD card reader for iPhone?

    I have searched and searched for an SD card reader for iPhone. Apple offers the camera connection kit for iPad but for some reason they have made it incompatible with iPhone. This doesn't make a whole lot of since to me unless they are trying to drive users to buy an iPad. So far I have only found one SD card reader that claims to work on iPhone: http://www.zoommediaplus.com/index.html . If they have actually made it work with iPhone and the app is in the App Store then Apple must allow apps to transffer data from SD cards. If so I can make one myself and build the hardware to go with it since the Apple SD card reader doesn't work on iPhone.
    I guess my main questions are:
         Does Apple allow SD Card readers for iPhone?
         if not:    
              Why don't they?
              Can anyone tell me where it is documented that you can not use SD Cart readers with iPhone?
              How does ZoomMediaPlus get their app in the App Store if it isn't allowed?
         if they do:
              Why aren't their more SD Card readers for iPhone?
              Why doesn't Apple's lightning SD Card read work with iPhone?

    Of course they forbid it.  You realize that an iPhone 6+ owner cannot use the Apple Lightning SD Card Reader, don't you?  We know the support for their own SD Card Reader is built into iOS 8 because it works with iPads.  Therefore, Apple intentionally turned the support OFF for iPhones.
    and it appears no one else has bothered to attempt to produce one
    No, Apple forbids any third parties from producing one.  They produce them for iPads but they cannot work on iPhones, because Apple chooses not to permit such functionality (i.e., they forbid it).  Third parties produce such adapters for Android, so obviously they would want to do the same for iOS so they could sell more. 
    You're recommendation for AirStash is uninformed.  I've tried it and found it to be a clunky time-consuming workaround if all you want to do is import some photos from an SD card.  Using Photos in iOS to import photos is a far more elegant solution - an Apple solution that just works (if you purchased an iPad).
    If it bothers you that iPhones do not work with Apple's own Lightning SD Card Reader, then I suggest you leave feedback instead of attacking those who point it out:
    http://www.apple.com/feedback/

  • Can I use conditional build tags in CSS files?

    I am using RoboHelp X5.0.2 and building CHM files.
    I use conditional build tags to output different Help files
    for the different products we have that all have similarities.
    In the past I have setup the CSS file to show headers, links
    etc in the color scheme we use to keep the look and feel of our
    branding. One of the new products uses a different branding color
    scheme.
    I was wondering if there is a way I can use conditional build
    tags in the CSS file so that when I build one type of help it uses
    header in one color and when I build another help it uses a
    different header color. Does anyone know how to do this? If it is
    not possible in my current version, is it possible in the latest
    version of Robohelp?

    [WORKAROUND ALERT IN X502]
    For .chm output, you could:
    1. In the Topics pane, select all the topics (click on one
    topic and press Ctrl+A).
    2. Right click in the highlighted area and select Properties.
    3. In the Appearance tab, select the different style sheet.
    4. Click Save.
    5. Generate the .chm file.
    6. (optional) Repeat steps 1-4 to revert to previous style
    sheet setting.
    Good luck,
    Leon

  • Can I develop CF projects using Flash Builder 4.5 for PHP?

    I currently develop CF projects using Flash Builder 4.5.  I am considering purchasing Flash Builder 4.5 for PHP.  Will I still be able to work on my CF projects using FB for PHP?

    Because in the installation instructions for FB for PHP it says that you have to uninstall the current installation of FB which I have several CF projects that I use regularly.  I hate to uninstall if it turns out that I can't transport my current projects into FB for PHP. 
    Oh that sux!  It's just an Eclipse plug-in, and one can have installed multiple installs of Eclipse OK, so I wonder why they're said this?
    OK, because I give suck advice, I'll D/L it and install it on a spare machine and take a look.  FB usually has a CF perspective does it?  So what you need to know is whether FB for PHP still has the CF perspective?
    Or are you asking whether you can install CFB (or CFEclipse) as a plug-in to FB for PHP, like one can with FB?
    Sorry about the bad advice.
    Adam

  • Mac mail version 4.5(1084/1085) can't be used on Mac OS X Version 10.6.8(Build 10K549)

    At some stage today I did an update which has killed Mac Mail.
    I have read the forums, performed a combo update 10.6.8 with no result, I still get the error
    You have Mail version 4.5(1084/1085). It can't be used on OS X Version 10.6.8 ( Build 10K5489)
    Any thoughts?

    Thanks mate but Software update is indicating that I am all up to date.
    I have booted off an older clone and mail was fine. I may have to go for a fresh install of the system but it annoys me to have to do that. It's gotta be something simple!

  • Can't export with Flash Builder using Android 4.3

    Just installed Android 4.3 and now I can't export from Flash Builder to my Android device. Also some of my previously installed Flex apps will not run. Anyone else seeing this? Any clues or answers???

    It seems as though, there might be another bug with AIR and Android 4.3
    If you use application scaling (applicationDPI) and css media queries.
    When deployed on the device (Galaxy Nexus) 160 dpi is always fired, rather than 240.
    Anyone else come across this?

  • AIR 3.8.0.440 / iOS: build fails with "ld: -pie can only be used when targeting iOS 4.2 or later"

    With AIR 3.8.0.440, iOS build with "adt -package -target ipa-ad-hoc" fails with a linker error:
    ld: -pie can only be used when targeting iOS 4.2 or later
    What's the correct option to suppress this error or does it need a fix for adt?
    In the app.xml,
    <key>MinimumOSVersion</key>
                <string>5.0</string>
    is already present in the iPhone InfoAdditions section.
    (Building the same app with AIR 3.8.0.370 is fine)

    Hi,
    Can you make sure that both your old ane and new ane are not present in your extensions directory.
    Also, how are you zipping/unzipping the ANE?
    If you are on a Mac, try these steps on the terminal:
    1) Create a new temp directory, say temp (mkdir temp)
    2) cd temp
    3) Copy the ane you need to make changes to into this directory.
    4) unzip nameofane.ane
    5) rm nameofane.ane
    6) Make changes to the platform.xml file using a text editor or vim
    7) cd to the temp directory again, (if you are now elsewhere)
    8) zip -r nameofane.ane .
    9) Copy the ane file created into your extensions directory, where you have placed the other extensions and then, package the IPA using adt.
    If you are on Win,
    1) Rename the .ane to .zip
    2) Extract the contents of .zip
    3) Make changes to platform.xml and save it.
    4) Go back to the directory where you extracted the files, select all the folders/files and right click to zip them back.
    5) Rename the .zip to .ane and then, package the IPA.
    It should work.

Maybe you are looking for