Can FCP output HDV back to tape now? + GOP Gonforming Question

I am having problem with HDV CONFORMED render files being messed up and playing incorrect parts of video or being out of sync and jerking around.
FCP has to conform the HDV stream's GOP back to normal after editing before it can output. Does this apply to compression for DVD as well as output to Tape?
Last time I checked you couldn't output HDV to tape.
Is this new?

Actually I am having problems with the JVC HDV format and FCP.
FCP scrambles parts of the video in the render files while conforming.
=====================================================
What workflow did you use to output HDV to tape?
The standard output to tape procedure?

Similar Messages

My ipod is brand-new and I mistakenly pressed the "restore" option! How can I put everything back to normal now?

My ipod is brand-new and I mistakenly pressed the "restore" option! How can I put everything back to normal now?
And after that, could you explain to me how can I put songs in it?

Re-sync your apps and content from iTunes on your computer or redownload it from the iTunes Store, then restore from your backup:
http://support.apple.com/kb/ht1766
That should put back most if not all of your settings and data. As to putting songs on, either purchase them from the iTunes Store or, again, sync them from iTunes:
http://www.apple.com/support/ipodtouch/syncing/
You might find it worthwhile to read the User's Guide:
http://manuals.info.apple.com/en_US/ipod_touch_user_guide.pdf
Regards.

Cannot output HDV seq to tape

I have a Z1 camera connected via Firewire, and am trying to Print to Video a 1080i50 sequence. The inputs on the camera are set correctly. I have successfully printed to video many times in DV format - this is the first time I have attempted to output in HDV. I am using FCP v6.0.6.
In the A/V devices tab of Audio/Video Settings, in the Video Output list, I am only given the option of None, or Digital Cinema Desktop. All the flavors of HDV are listed, but are greyed out. Also, if I uncheck Different Output for Print-to-Video, it resets itself to checked the next time I look. I cannot set the View/External Video to All Frames - it remains set at Off no matter what I do. I suspect that here is the root of the problem - the video is not getting out of the computer to the recording deck.
I have only one external drive containing the sequence footage connected to the computer - I have previously experienced problems when multiple drives were connected.
Does anyone know where I may be going wrong?

Jim: Sony HDV 1080i50 is set as the device control, although I don't think device control is used when printing to video. The recorder is started manually.
Thrillcat: The settings are correct on the camera for HDV when trying to record an HDV sequence, and yes, the sequence is HDV. I can successfully connect my DSR-11 DV-only deck and record to it from FCP, even recording a DV output directly from the HDV sequence.
Sharon: I'm checking the A/V devices settings right before I go. The problem seems to be that although FCP is acknowledging there is an HDV device connected, it is not letting me connect to any of them (the list of HDV device options is greyed out). Consequently all subsequent actions will not work (like selecting All Frames in the View menu). I need to find out why that list is greyed out.
If I check Different Output for Edit-to-Tape/Print-to-Video, the list of HDV devices is available, but I get a warning asking me to check external connections to the device, (as this output does not go to the Firewire output and I have no alternative video card installed). If I try to proceed further, I get a warning that "The sequence is not compatible with HDV Print to Video". However, the sequence is a correct 1080i50 sequence.

Outputting 720p30 back to tape

Hi,
I have FCP 5.0 on a 2.5 GHz G5, operating OSX 10.3.9
I can capture my 720p30 footage that was shot on a JVC HD101 through my JVC HD50 deck fine. On the timeline I need to render before i can view... can someone help on this? (all sequence/capture presets are the same)
I can still cut though but when it comes to spitting it back to tape, back to 720p30 HDV, I can't. I am going through the print to tape function, the computer takes control of my deck and starts recording but when i review there is no image on the tape....?
Any help appreciated!
banyak

how can I import my imovie 09 file to be recordable to tape without loosing quality?

Can you print HDV to SD tape?

Hi,
I was wondering if it was possible to print HDV to SD tape once I'm finished with my HD edit. If so, how would I go about doing it?
Thanks!

Paste your HDV Timeline into a DV-NTSC Anamorphic Sequence. Render it.
Connect your deck via FireWire and from the View Menu > Video Playback, select the deck.
Choose *Print to Video* from the File menu.
Further details can be found in the manual, although I found the on-screen dialog pretty much self explanatory, the first time round.

Output HDV Project to Tape?

I noticed that the Export to Tape... function is disabled in an HDV Premiere Pro project.
Why is this? How would you put a finalized HDV project BACK to tape?

P.S.: Have a look at the second paragraph of
Options for exporting HD and HDV sequences in the Premiere Pro CS3 Help.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Lost the security question and safety email, but there are 3000Yen in the acc, How can I get it back or how to reset the question?

I can't remember the answers of my security questions and i lost my safety email as well. Unfortunately, I just add 3000YEN into the acc. How can I reset the security questions? or how can I get that 3000YEN back ? anyone can me with this situation T.T

You won't be able to view and/or change your rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to view and/or change your rescue email address for potential future use : http://support.apple.com/kb/HT5312

I reseted my MacBook Air, and now I don't have my iPhoto or Microsoft Office anymore. how can i get them back ? please help me..

I reseted my MacBook Air, and now I don't have my iphoto and microsoft office anymore, please help me..how can i get them back?

Thank you for your question,
If you have the installation disc for iLife and MS Office, then you can install it from there. With iPhoto, if you downloaded it from the Mac App Store, you can redownlad it fron the "Purchases" tab.

CS5 can not output MPE to external DV device

This is quite a surprise for those of us who rely on DV output.
Harm Millaard:
"An MPE card stops external monitor viewing."
"The problem is that CUDA does not currently support output
on DV devices, only full screen second displays (DVI, DisplayPort, etc)."
"...one serious limitation, those who use dual monitors for editing and
a third monitor for full screen display and color grading or that use the
fire wire connection to record DV/HDV back to tape.
Some may think tape is dead, but there are numerous people around
that still like to jeep their final cut on a master tape."
"The basic problem is how to get a DV signal back over firewire for
exporting to tape or display on an external monitor and that currently is a CUDA problem."
"It must be resolved. If not, the introduction of CS5 / MPE as a game changer
can quickly turn into a game stopper.
I think (purely personal opinion) Adobe and nVidia must correct this ASAP
Otherwise you end up with a SNAFU."

J Graves wrote:
The first post about this CS5 bug was in May. It is now Augusut and still no fix?
Every time I'm about to place my order for CS5, I find out about another "gotcha' problem. I'm still on CS3 and am seriously wondering whether I should continue to move forward with Premiere.
I still use an older "DPS Velocity Quattrus" system and it still leaves Premiere in the dust. Unfortunately Harris, who bought Leitch/who bought DPS, has discontinued the product. A software developer from Itlay is attempting to breathe life into it (ivsEdits.com), but it isn't a fully operational system.
Yes, "Firrewire" output is still a Big Deal. There are many of us who use our editing systems as a business tool. Going back and disabling the Mercury Engine, then re-rendering as "software only" is a waste of my time.
Come On, Adobe & Nvidia, get this fixed!
Well...i'd guess that CS5 hold it's own against a system like yours for flexibility...though if the way that card works is in your workflow "sweet spot" then I guess you're probably best served to stay with it.
If you have a system that has the juice to even run CS5, i can't imagine that running a CUDA-augmented system for Mercury is even remotely necessary for editing DV... as far as using our systems as a business tool...I'm not sure what you're implying. Most of us who are in the production business -in general- have moved to some form of HD some time ago, most of my peers made the move during CS2...
Are you implying the rest of us aren't professionals, even as you are lobbying for aggressive support of a consumer-oriented I/O configuration? I hope not.
It's not a bug BTW...it's a configuration that a few people don't like...but when your effects render is out on the display card, that's the way the pipe is routed. Even HDSDI card manufacturers are finding that pulling those frames back off the display card negates some of the speed gains.
If you have a system that is qualified for it, I think you should download the demo and try it before you assess PPro CS5 any further. You are making lots of sweeping statements about a piece of software released almost 4 years ago running on a hardware system that was discontinued 4 years ago being better than the newest software running on up-to-date hardware without understanding what its performance is really like...even without a CUDA card.
I can shut off CUDA and rip through DVCProHD like there's no tomorrow on my 3 year old dual dual core AMD...I have to believe you'll be able to -shred- DV on even an average-ish machine by today's standards.

HT4623 I lost my maps icon when updating. How can I get it back

When updating the software on my iphone, I skipped the area where you put in your Apple ID. Now I do not have the maps icon. How can I get it back?

Well now I was able to download a back up disc for my windows 8 and try to load it and set the laptop to run the d: drive upon startup and not able to in BIOS can someone do a peint screen of the boot order screen

PRO RES 422 HQ from color to fcp to HDV 1080i tape

Have just thrown myself off a bridge due to frustration. Filmed a holiday movie a few years ago on HDV Pal and taught myself color on the project after completing it on FCP. I have spent 3 months of my spare time getting it looking how I want it and have just sent it back to FCP for outputting. Everything hunky dory so far except when I came to print to video (back to HDV for archiving) I'm being told that I can't print that seq to tape. Presumably because PRO RES 422 won't go to HDV. Is that so and do I have any answers?

For having just thrown yourself off a bridge, your grammar, spelling, and punctuation are impeccable.
You are correct. A ProRes sequence will not go to HDV. You must place your ProRes sequence into a new HDV sequence, render/conform, and print that to HDV tape.
When you're going out via firewire, you pretty much have to match your sequence settings to your deck settings, DV>DV, HDV>HDV. Hardware capture cards/boxes by AJA & Blackmagic can up/down/cross convert on the fly, but not a direct firewire connection.
So, use your ProRes sequence to create the DVD, and create an HDV sequence to archive it to a tape.
And stop throwing yourself off bridges.

Can't use HDV quicktime .mov files (captured in FCP on a mac at work) on PC

Hiya everyone!
I've taken some work home from the macs at work, but can't open it on my PC.
Footage was captured in FCP on a mac at work, HDV quicktime .mov, but won't open in the newest quicktime, windows media player and more importantly in Adobe After Effects CS3 or Premiere Pro CS3 on my PC at home.
When I try opening the files in quicktime, the screen is white, but the audio plays. They don't open in windows media player at all. When I try to import them into Premiere, I get a message reading, "Error Message, Codec missing or unavailable". But they import into After Effects, except they only play as white...
I've tried converting them into almost everything, and they often play (as .avi for example in the newest QT, WMP, Adobe Premiere and AE), but they increase A LOT in size and decrease A LOT in quality.
The HDV files that won't open read as:
Source: *.mov
Format: HDV 1080i50, 1920 x 1080, Millions 16-bit Integer (Little Endian), 48.000 kHz
Movie FPS: 25.00
Playing FPS: (Available when playing)
Data Size: 69.53 MB
Data Rate: 28.10 mbits/sec
Current time: 00:00:01.64
Duration: 00:00:20.76
Normal size: 1920 x 1080
Current size: 1920 x 1080
Anything smaller than 1920 x 1080 plays fine.
I've been all through google, and the adobe and apple sites, and the best I could find is here:
http://discussions.apple.com/message.jspa?messageID=7753066#7753066
and
http://discussions.apple.com/thread.jspa?messageID=8159317&#8159317
My problem is almost identical to these 2...
No one in the whole world seems to have an answer...
Does anyone here know how I can use the HDV files from the work macs on my PC at home?
-Kaiwin

HEy, I have been looking into this problem... i also wanted to play quicktime files using my pc... The last thing i tried was downloadiing these codecs
1)apple pro res *for pc
2)mpeg 2 codec for pc
I have HDV files captured on a Mac G5 they are 30p 720,
I think i am close to solving the problem because: before installing the codecs i couldn't see the video and only audio.. but now i open it and i can see the video partially... here are my screen captures....
anyone interested in getting this solved???,... i would also like some help in importing m2t files from VLC player to HDV split where they can be read and edited. Thank you.
Ultimately my goal is to be able to edit these HDV files directly and export them back out with good quality.. because my only editing choice right now is Windows movie maker.
this is an error i got from the HDV split program. Its supposed to read m2t files..

Audio pops in tape output (HDV)

I'm sending a native HDV timeline back to tape, but when I do so I get little pops in the audio. There are no audio artifacts in the timeline, and my file outputs (DVD mpeg and cineform AVI) both sound just fine. Any ideas what might be behind this? I'm running PPro CS3 v. 3.2.0 on the following system:
Dell Precision PWS390
Intel Core2 6400
2.13GHz, 2GB RAM
NVIDIA Quadro FX 3450/4000
Thanks.

Do you have Audition or some other wave editor that can change the soundfile to 16/44.1? If not, you might want to try Audacity. It's a free editor that works pretty good.
audacity.sourceforge.net
Just export the sound only from the timeline as a wave file, open with Audacity, change the bit depth and re-save it, then bring it back to the timeline in CS3 either on it's own track while muting the old one, or just delete the old one altogether after separating it from the video.
At least I'm guessing that's the problem. If it is then you'll have clued us all onto to something new to watch for while exporting to tape. Consider yourself a guinea pig sir!

My fiance logged onto my iphone with his apple ID and now I can't switch it back to my username. How can I change it back to mine? ( but when I go to setting,icloud my un/pw are there)

My fiance logged into my iphone with his apple ID and now I can't switch it back to my username. When I go to buy an app his username is in an editable format to beable to change it back to mine. How can I change it back to mine? (when I go to setting,icloud my un/pw are there) Can someone please help? Thanks!

Had you looked in the User Guide, you would have found this: Settings>Store. Tap on AppleID to change.

The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is always talking. How do I make her voice go away and my IPAD work like it should.

The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking. How do I make the voice stop and my IPAD work again.

If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

Can FCP output HDV back to tape now? + GOP Gonforming Question

Similar Messages

Maybe you are looking for