Can FCXpress work with .mov files?

I captured some files with the isight camera using Quicktime Pro, the default is .mov, the default video ios h.264, when I drag the file to Final Cut Express those files cannot be opened: File error. unknown file.
can Final Cut express use the quickfiles that I captured with the isight camera?
thanks
Dual 2 GHz PowerPC G5 Mac OS X (10.4.9) 4GB DDR SDRAM, MAC OS X Server

Should be able to. Try converting to a different format via MPEG Streamclip.
http://www.squared5.com/

Similar Messages

Help: Working with .MOV files in FCP and forced to RENDER FOR EVERY EDIT

I'm working with .MOV files from my digital camera in Final Cut Pro and every time I make a new edit, I have to render it in order to see it in the canvas.
How do I make it so that I don't have to render every edit in order to see it?
(I've worked with files straight from a DV camera, and editing went fine. I'm assuming it has to do with the .MOV files)

DV Cameras are not the same thing as a Digital camera. Digital cameras offer video on a limited basis and it's usually highly compressed in a non-editing format such as MPEG-2 or similar. NLEs are made to work with video cameras, not still cameras which is why you're having trouble.
That's not to say you can't edit video captured with a digital camera, but you need to know how to prep it for editing. Some digital cameras shoot at odd frame rates and they all use some form of compression that is not typically used in editing. This means that you'll likely need to convert your clips to an editable format first using Compressor.
Andy

I accidentally cut instead of copied a folder of previously imported raw files. When I pasted the folder back I could see it in Windows Explore but not in the LR library. How can I work with these files again?

HI,
My daughter will often ask me to give her raw files I've taken at family events so that she can process them in her own copy of LR. (I work too slowly, apparently.) Recently I inadvertently cut instead of copied a folder. When I pasted it back I could see it in Windows Explorer but not in my LR library. I thought that re-importing the files might work, LR gave me a message that they were already imported. I expect there is a way to make the files available again in LR and would be grateful for some advice.
thanks
Ken

The solutions is either of the following:
Adobe Lightroom - Find moved or missing files and folders
Copy the photos back into the exact same folder and folder location that they were in before
I don't know what you actually did "when I pasted it back" ... but the bigger issue is that you shouldn't be working with these files in your operating system, period. Once you import them into Lightroom, you don't manage these files in your operating system.

How Can I Work With PHTML Files In Dreamweaver ??

I want to work with PHTML files in Dreamweaver CS3 - How do I
go about getting this to work?

The solutions is either of the following:
Adobe Lightroom - Find moved or missing files and folders
Copy the photos back into the exact same folder and folder location that they were in before
I don't know what you actually did "when I pasted it back" ... but the bigger issue is that you shouldn't be working with these files in your operating system, period. Once you import them into Lightroom, you don't manage these files in your operating system.

Can I work with .docx files with snow leopard?

I'm told if I use windows, I can fill out .docx files after I down-load them, rather than printing them out, filling them out by hand, then scanning/attach to an e-mail or 'fax' them. Can I do this with Snow Leopard 10.6.8 ?

Yes. http://www.openoffice.org/ will open and edit DOCX files. Use Windows Attachments when clicking on the paperclip attachment in composing messages to attach the DOCX file. The paperclip icon will appear if you use View menu -> Customize toolbar to add it there, if it was not there already.

How can I work with big iMovie 6 file?

I am trying to make a one 70 minute movie with iMovie 6 but am having great difficulties because the file has reached 78 gig and is now unworkable because it is just too slow to even play. Even cutting it in half does not solve the problem. Each half will play but I can't work with them in the timeline. I need to add more audio files and music. Any suggestions?

I suspect most slowdowns occur because of complex audio, not the size of the project. It sometimes helps to export the audio to an AIFF file, then re-import that file back into the project and place it in its own audio track. When you disable the audio of the other tracks, playback is improved.
That makes it harder to edit a half-finished project, however. It's a technique best reserved for almost-finished projects.
You could export the timeline to the camera, then re-import it to a new project. That will both make the project smaller and "flatten" its audio and video. Most clips will return as the clips they are now.
70 minutes of video is ordinarily about 15GB, so something has increased the size substantially. (That's not normally a problem you have to worry about; the size of the project itself is probably not the problem.)
Karl

How can I copy or move files with elements 10 organizer ?

Hello,
since a couple of days I use Elements10 Organizer under Windows 7 Home. Since then Im testing how to come along with the product and it's features. Though I had many good impressions of many functions that work excellent I now have severe problems to organize my workflow. The problem is: I can*t copy or move files or directories with the organizer and worse, I can't find files or directories that where copied, moved or renamed by Windows 7 Explorer even when I import or load the specified directory into the elements10 catalogue again. Off course I understand the elements 10 philosophy to have an image only one time within the data base and to arrange every collecting idea by tags and catagiories. Nevertheless there is a need to have sometimes a copy and also to know where the copy is and to manage it. Right now I find no way to handle these tasks by elements 10 organizer. I am a newbe on photoshop elements.
I would appreciate if there is anybody who knows a solution to me. Thanks and bye, Woenni

I am also having this same exact problem. Only some, and not all of the files on my external hard drive will copy. I get the "No Symbol" when trying to copy or move files.
I am able to duplicate all files. I also can right click on a file and select copy. However on some files, I can't ever paste it (paste doesn't show up or is grayed out), drag it to another folder, or drag-and-copy it to another location or drive.
The files are not locked and I have read and write permissions.
The external that I'm trying to move and copy files from is a FAT32. Could that be a problem? How do I get my files off of this drive?
*PLEEEEASE HELP!*

I would like to work with DICOM files so I may buy Photoshop CS6 Extended. Can a TIFF be exported from a DICOM file in Photoshop CS6 Extended?

I would like to work with DICOM files so I may buy Photoshop CS6 Extended. Can a TIFF be exported from a DICOM file in Photoshop CS6 Extended?

Also, I am looking through the Adobe website, and I can't find any place where Photoshop CS6 Extended is even offered for purchase. Is it extremely well hidden, or is it not available?

My hard wear and soft wear crashed, did a backup on all my files.When I now open them the are all "preview"!!! How do I get my old documents back? it should be pages, and numbers, ight now I can't work with them

My hard wear and soft wear crashed, did a backup on all my files.
When I now open them the are all "preview"!!!
How do I get my old documents back? it should be pages, and numbers, right now I can't work with them

Reinstall OS X

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
Product updates

Can Premiere Pro CC work with mpeg files?

I tried to work with *.mpeg files, but can import them into a project.
Can Premiere Pro CC impoert and export mpeg (1, 2) files?

Lucky ...
As shooternz says, yes ... although if you are new, you may not realize that when you start a project, you have to manually "create a sequence" first, THEN you can add clips to the sequence. Until you have a sequence on the timeline, simply dragging & dropping from either the source monitor or project/browser panel to the timeline area will not work. Nor trying add a clip to the timeline either by the properties panel (after right-clicking on a clip) or the top menus.
Create a new sequence on the timeline, then ... you can drag & drop from either the source or project/browser panels, right-clicking on footage and using the property menus, all now works.
Steps to create a new sequence ... "ctrl(cmd) - N" with keyboard to create a new sequence, or in project/media browser panel ... right-click and choose "new -> sequence", or in that panel click on the piece of paper with a folded-corner icon (lower right corner) then choose "new->sequence" or of course, "File->new->sequence" from the main menu bar.
Neil

Problem when load more swf files work with xml files into my movie

hi ;
I have one flash file & more of swf files which work with xml files .
when I load one swf file into my flash file and remove it and load anther one on the same movieclip in my flash file it load the old swf file.
when i load one on movieclip and remove it and load anther swf on anther movieclip the file doesn`t work and stoped.
when test my flash file to load and remove swf files without xml file it work fine but when repleaced the swf files with other work with xml files the problem hapend.
thanks;

YOu should trace the names of the files that are being targeted for loading to see if they agree with what you expect. If you want help with the coding you will need to show the code that is relevant to your problem (not all of it)

Working with WMV files in FCP 5 Timeline

I know Flip4Mac Studio Edition allows for importing and exporting into and out of FCP 5 in WMV format. What I'm not sure of, is can you do intensive editing on the WMV files in FCP 5 without any glitches. Will FCP run smoothly?
I am asking because I work at online company that will be receiving wmv files on its servers. This is a high volume workflow with an intense turnover rate. We are receiving hour long clips and re-editing them down to 2 minutes. There is no time to go through lengthy WMV to MOV conversions. We need to receive, edit, and output all in WMV.
Can FLip4Mac with FCP 5 edit an intense environment like this? Where everything is done in WMV? Or Is Flip4Mac primarily for converting WMV into MOV so that editing in FCP is done with MOV files, and then at the end exporting as WMV again.
Is FLip4Mac the only solution. Are there others? After recommending and praising Macs, I may be on thin ice if FLip4Mac isn't a sufficient workaround!!
Thanks Curtis

Saving a WMV as MOV in QuicktimePro is simply putting a MOV wrapper on the WMV so FCP will better handle it. It's a Save As not an export so there's no additional compression.
Ultimately you will have to render though, most likely because it's not one of the video formats natively handled by FCP (DV, DVCPro50, etc). It's not just the physical settings, the "video" codec itself must be supported. BTW if you were to edit in HDV you'd have to render too for output (to create new GOP structure in that case though).
Hi Craig,
Thanks for the advice, a few things though....
"Flip4Mac Player Pro allows you to edit WMV in FCP."
The problem is that I need to render when I import
WMV files into FCP, even though I have matched all of
the parameters in the sequence settings (ie. pixel
aspect ratio, frame rate, frame size, etc.)
I don't know for sure, but my understanding is I have
to render because there is no WM9 option under the
"compressor" parameter in the Sequence Settings.
Because of this it is impossible to import WMV files
without rendering even with FLip4Mac, because I have
it installed and can still export as a WMV file.
Have you discovered a way to import WMV files into
FCP without needing rendering? This is critical for
me because the environment I'm in doesn't allow for
long render times, as it will slow down the workflow
of the whole newsroom.
"I can also open WMV in QuicktimePro (with Flip4Mac)
and save the file as MOV. I find it works smoother
that way."
But doesn't it degrade the quality when you convert
to .MOV? And for me, going from WMV to MOV back to
WMV will result in degradations at each step won't
it?
Curtis

Premiere Pro CC not playing fair with .mov files

I have a CC account and use Premiere Pro on my PC with no issues so far except that the RAM and Graphics card suck. So I decided to run on my laptop running windows 8 rather than 7.
AE runs with no issues (so far), but when I use Premiere Pro it does not like .mov files for some reason.
I imported files from my iPad and it gives me this message:
Error Message
"The FIle Has no Audio or Video Streams"
To work around it for now, I converted the file into mp4 and imported to edit from there. Now issue is that we need to place a lower third. I have an AE project as the .mov file imports into that no problem, but when I then export as quicktime file for the alpha channel it still will not import into Premiere Pro, same error message.
I can export as .avi but then the file screams 'MASSIVE' as it is over 1.5gb cpmpared to the 32mb as a .mov file.
Bottom line, cannot get any .mov to import into PP on my laptop even though it works fine on my PC. Also, .mov files play fine in AE??
Please HELP
Martin

Hi MartinSalteruk,
Thanks for contacting Adobe Forums,
As I understood you are only getting issues with .mov files, Please check if you Quicktime player installed on the system.
if not click here to download the Quicktime player
Regards,
Sandeep

Working with huge files (4GB-15GB) in iMovie 11

should i keep my smaller (4GB) mp4 files in storage or use the 15GB mov files already imported into iMovie '11?
I may want to work with these files again in the future, but is it worth the space to keep it in iMovie so I don't have to reload and optimize such large files?

Welcome to the Apple Community.
That's really a question only you can answer depending on whether you need the space in the meantime. If not keep the optimised files. If you want to work not only with the event files again but the project again, you will need to keep the optimised files.

Can FCXpress work with .mov files?

Similar Messages

Maybe you are looking for