Can fiber channel be used for connect server to a storage in two nodes RAC

I decided to have an Oracle RAC cluster with only two nodes.
The storage I have is a sun 3510FC. Also have five fiber chanal ports. But my each server (Sunfire v240) has got one Ultra160SCSI multimode (SE/LVD) not any fiber chanal ports. I found that there is some FC card available to use but none fiber switch available. I want to install this FC cards to the servers and make a straight connection with fibre cable to the storage. Can this be asolution or do i have to have a fibre switch?

Hi
Irrespective of whether such a configuration is supported or not by Oracle.
Has anybody got 10gR2 RAC working on
a. 2 servers
b. shared storage with HBA and fibre channel cables
c. interconnect on LAN
(yes we know it is not supported by Oracle...but again we are not going production on that....just for demo/training purposes)
No FC switch
No ethernet switch
If anybody has got this working would be great to hear of 'issues to guard against'
Thanks

Similar Messages

  • If the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

    if the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

    thanks for your reply!
      what's protection software can use for exchange server 2013?
    Hi,
    Most (if not all) of the bigger vendors has a product that supports Exchange 2013, so look them up.
    Exchange 2013 has some Anti-Spam and Anti-Malware Protection functionality that you can read about here:
    http://technet.microsoft.com/en-us/library/jj150481(v=exchg.150).aspx
    Martina Miskovic

  • Is it possible to install a consumer app for mass usage that would alter the ios device proxy settings? Over the air not supervised. Can an app company use an MDM server to do this if the customer consents?

    Is it possible to install a consumer app for mass usage that would alter the ios device proxy settings? Over the air not supervised. Can an app company use an MDM server to do this if the customer consents?

    HI Chris,
    Thanks for taking the time to reply.
    Could you expand on your answer, which bit is very doubtful?
    Also in your knowledge would Apple work with a company and license it if the software they were developing was desired by consumer demand?
    Thanks
    Gary

  • Netscape cert type does not permit use for SSL server on Weblogic

    We have WLS 11g (11.1.1.5 SOA) on UNIX and we are trying to connect secured service (Using client certificate along with UserName and Password for Authentication ). I was able to test it using SOAP UI.
    But when I am testing the webservice I am facing listed error
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): https://abcd:1111/JWSs/V1/TermsWS at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at
    and domain log shows that
    Caused By: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: Netscape cert type does not permit use for SSL server
    Please help me to resolve listed issue.
    Can I use Netscape client certificate on WLS?
    Do I need to take any extra care while working with client cert?
    I appreciate your help.

    Netscape cert type does not permit use for SSL clientTry using another certificate. Your certificate can't be used as a web browser client certificate.

  • Can Adobe Distiller be used for converting all pro/e (3D -2D)  files to pdf format?

    Can Adobe Distiller be used for converting all pro/e (3D -2D)  files to pdf format?

    Acrobat Distiller Server converts Postscript to PDF.

  • Can Apple TV be used to connect OS X to TV as monitor?

    I am looking for a way to use my TV as monitor (and maybe use the TV speakers as well) for my Macbook Pro but connect to the TV over the network. Can Apple TV be used for something like this?
    Any other idea?

    xsi wrote:
    I am looking for a way to use my TV as monitor (and maybe use the TV speakers as well) for my Macbook Pro but connect to the TV over the network. Can Apple TV be used for something like this?
    Any other idea?
    not quite sure but, could ScreenRecycler be the answer ?

  • Can Firefox Hello be used for three or more way calling or is it only for person to person?

    Can Firefox Hello be used for three or more way calling or is it only for person to person?

    hello again, i've asked in the development channel for firefox hello about this issue: multiparty video-conferencing is on the long-term roadmap but it might still take a lot of engineering (firefox hello is based on the webrtc standard which is a peer-to-peer protocol between two machines only - multiparty calls might be a rather tricky thing to figure out on this basis)

  • Can EMET provide a useful protection to server systems

    Hi,
    yesterday i had a discussion about "If EMET can provide additional protection to a server systems". Almost all participants think that EMET is a pure client tool and for this reason installing it on a server makes no sense. In my opinion there is
    no difference how EMET works to protect a client or a server process. in this context, some question:
    Can EMET provide a useful protection to server systems?
    Was there any "MS Bulletin (for server systems or server roles/features) in which EMET where recommended?
    Are there any officially tested application EMET settings e.g. for the IIS?
    have a nice day.

    ''you must modify image.mem.decodeondraw''
    type in the address bar '''about:config'''
    then press the button '''i'll be careful i promise
    then type in the bar '''image.mem.decodeondraw'''
    then '''Double-click '''on it, to make it '''false'''
    ''exit firefox and restart-it''.
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Where You can create a support case for weblogic server?

    Hi all,
    I would like to know where I can create a support case for weblogic server?
    I logged me in metalink3 but I did not found a way to create a service request for WLS.
    Thanks in Advance.

    I believe you still need to use BEA's support resources at this point: http://www.oracle.com/bea/support.html

  • Can Solaris Os System  use as a server edition

    Hai guys i am new to solaris system, and my company selected solaris system as our server edition....
    Can any one enplane me the solaris OS system could we use as a server edition ?

    You could run a Mac Pro using OS X Server. This would allow you to provided services to your small office network, and still use the Mac Pro as your desktop machine.
    However, depending on what you are actually intending to use the server for, you may be better off with an older Mac to use for your server. Simple AFP and Windows file services are easily handled by just about any Mac, with the older Quicksilvers through the G5's being good choices for use as servers.
    Having a dedicated server, instead of one sharing use as a desktop, means a more stable server for everyone else to use. It also will allow for a more consistent backup and archiving, then a dual role machine will usually be used for.
    However, if you do not have the funds to repurpose an older machine, or buy a new machine for your server, then sharing a desktop with a small office group is indeed doable.
    As for running Autocad and the server os at the same time, the answer is probably no. The reason is the bootcamp based Windows XP is a one or the other proposition, you are either running WIndows XP or OS X but not both.
    On the other hand, if you use virtualization software, such as Parallel you can run both OS X and XP at the same time, however, current released versions of Parallel have limited graphic acceleration and 3D support. Newer beta versions of Parallel are starting to include better graphics support, including 3D. So the question is if AutoCad will run reasonably well under Parallel or not. I think the answer will depend on how you use AutoCad. If you use it mostly for 2D drawings, then it will probably run fine. If you use 3D rendering, you may need, at least for the time being, need to use Bootcamp to run Windows XP natively and get full graphics support.
    Tom N.

  • Can FW CS3 be used for graphic for printing?

    I am very familiar with FW but I do not like Photoshop,
    however I have both I preffer to use FW. As I have seen on one
    presentation new FW CS3 has CMYK pallete so my question is: can FW
    CS3 be used for preparation of graphic for printing or what are the
    obstacles? After preparing images in FW I will use InDesign for
    text or maybe the text in FW is wector and maybe I could use FW
    including text and not to use INDEsign far small projects? Does
    anyone has any experience with this subject?
    Regards
    Martin

    qnnick wrote:
    > I am very familiar with FW but I do not like Photoshop,
    however I have both I
    > preffer to use FW. As I have seen on one presentation
    new FW CS3 has CMYK
    > pallete so my question is: can FW CS3 be used for
    preparation of graphic for
    > printing or what are the obstacles?
    Fireworks does not operate or export in CMYK color space. It
    was
    developed for screen images only, and operates and exports in
    RGB color
    space. It is not recommended that you use it in preparation
    of images
    for print. You mentioned that you don't like photoshop. You
    might like
    Illustrator better.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    http://www.adobe.com/communities/experts/

  • Can an iMac be used for WD My Book Live safepoints?

    I have a Western Digitial My Book Live network drive.  All Mac's and PC's can read/write without a problem.  I would like to create a safepoint (WD term for backup) on an iMac but can't seem to get past correctly discovering the devices on the network.  The MBL can 'see' the shares on the XP PC but nothing on the Mac's.  Unfortunately the XP PC is not suitable for backups.
    Can a Mac be used for MBL safepoints?  If so, how is that accomplished? 
    Yes, I've posted this same question the WD Support and WD Communities but no responses.  Most MBL Mac users posting on WD forums are using them for Time Machine.  I thought maybe someone on the Apple forums might have solved this problem.
    Thanks in advance for any help.
    Mike

    I am having the same issue.  Did you ever find an answer?  I see no one ever responded to you.  I have a WD cust service Tech support question submitted but no answer yet there either.  Thanks for any info you have.
    I get the error
    30000 - Unknown error. Retry your last operation. If the error persists, contact WD Support for assistance.
    (share_discover_9)
    when I choose the iMac as the location I would like to use.

  • Can a IDOC be used for data exchange from R/3 to CRM

    Hi All,
    First, can a IDOC be used for data exchange from R/3 to CRM
    I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
    To achive this can I use IDOC?
    Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
    Please respond immediately.
    Regards,
    Gopinath

    IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
    Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
    Hope this helps,
    Kai

  • In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel.  I can boot up and use for about 5 minutes before the mouse freezes.  I believe something is   overheating.  What would that be - so I can have repairs done?  The

    In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel.  I can boot up and use for about 5 minutes before the mouse freezes.  I believe something is
    overheating.  What would that be - so I can have repairs done?  The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
    <Edited By Host>

    Hello USME,
    'Tis a common problem on old Macs.
    Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
    Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
    Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
    Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through  the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
    Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
    A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire  working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
    In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
    Good luck!... Jon

  • Can Adobe Collage be used for images smaller than the standard 1200 by 789?

    Can Adobe Collage be used for images smaller than the standard 1200 by 789?

    Hi,
    * Photoshop Touch does have very good text capabilites.
    * For opening the Collage as an Artwork (Merged layer) in Photoshop Touch, you just need to upload the Collage file to Creative cloud and import it directly into Photoshop Touch.
    But if you are looking to preserve all the layers of the Collage file, you should download the Collage file as PSD from Creative Clould and import it in Photoshop Touch as layers.
    * Collage does have canvas scalability, you can extend up the canvas on all the four directions. But i think in you case you are looking for having specific custom sizes of the canvas, which is not currently available in Collage. Currently you cannot shrink the canvas below the default canvas size.
    Hope this is helpful. Please do revert back if you have more queries.
    -Subbi

Maybe you are looking for