Can field point folder be mapped in Windows Explorer?

Can storage in field point controller be mapped with a drive letter in Windows Explorer?

Hi Roger.
You can see your FieldPoint in Windows Explorer by typing ftp://(your IP address) into the address bar. This will not display as a lettered drive in My Computer, but if you want to have a folder that will connect to that FieldPoint controller, you can make a shortcut to the device by creating a new shortcut in Windows, and give the location as "explorer ftp://(your IP address)"
I hope this helps.
Regards,
Stephen S.
National Instruments
Applications Engineering

Similar Messages

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

Can't view LR metadata modifications on Windows Explorer? What gives?

Hi all,
This is my first question to the community, I searched for the answer to this problem here and elsewhere but not able to find out why, hope you can help.
I'm coming to grips with managing data in LR but I've stumbled upon a snag. I'm using LR 5.7 and adding metadata to CR2 and JPG files and wanted to check whether the metadata modifications showed up on Windows Explorer. It appears as if they don't. My workflow is detailed below, could you point out if I'm missing anything?
What I did was fill some IPTC and EXIF fields on LR 5.7 and click on "save metadata to file". The fields I added data to was headline and description (IPTC), user comment (EXIF) and title and caption fields (Lightroom's own fields I presume).
However the metadata I added does not display on Windows Explorer (upon right click/properties/details). I'm using Windows 7 and MS website says Explorer is able to display IPTC and EXIF fields. This however does not seem to be the case. Did anyone else come across this problem or am I doing sth wrong.
To test it further I modified Title, Subject and Comments fields on Windows Explorer (through file properties/details tab),.I don't know whether these fields are an official part of IPTC or EXIF standards but they don't display on LR either.

My Windows File Explorer (8.1) does show some of the metadata that LR 5.7 writes, but not all. I no longer have access to Windows 7, but I'm certain that it does too. LR 5.7 will also read metadata written by Windows Explorer.
Some general caveats:
- Be sure to Save Metadata To File in LR, or better, set the option Edit > Catalog Settings > Automatically Write Changes Into XMP.
- When you make changes to metadata outside of LR, be sure to Read Metadata From File to get it back into LR.
- When you make changes with the Explorer Properties window, make sure you click OK or Apply.
- Use the free Exiftool if you want to examine metadata authoritatively. Virtually every other program, including LR, Windows Explorer, and OS X Finder, has significant problems and limitiations with metadata.
I can't explain all that you're seeing. If you can't figure it out using Exiftool, then I suggest taking a sample pic you've written with LR, upload it to Dropbox or similar, and post the link here; we can take a look.
The LR metadata fields you mentioned map to these industry-standard fields:
Title > XMP:Title, IPTC:ObjectName
Caption, Description > EXIF:ImageDescription, XMP:Description, IPTC:Caption-Abstract
Headline > XMP:Headline, IPTC:Headline
User Comment > EXIF:UserComment
Windows File Explorer doesn't show Headline, and it has somewhat different mappings for Title. You can experiment for yourself with Exiftool.

Photo problems and can i drag and drop files using windows explorer?

i can only sync photos frm my com to my touch but i cant choose which photos i want and i tried searching for the files in itunes and i cant find them, thus cant delete them...
on top of that, i can access the files in my touch but cant find any option to delete them...
when i go the photos tab in itunes, it only shows me the window to sync files and the 2nd question too...
because when i drag and drop on itunes, it's quite laggy...and if i use windows explorer to drag and drop, will the duplicates on my playlist appear as 2 files or will it be like itunes where it can detect the main file and simply adds it to the list?
thank you...
sorry for the wall of text...

There's no manual mode for photos just different ways to sync but here's a simple "How To" on managing your photos so that it's easy to add and delete what you want on the iPod:
1 Create a folder on your hard drive to hold the photos you want on your iPod. Call it iPod Photos for example
2 Drag the photos you want from your usual picture folder into the folder you just created
2 Open iTunes, select your iPod in the iTunes Source list.
3 Click the Photos tab and select “Synch photos from.”
4 Choose “Choose Folder” from the pop-up menu and select the iPod photos folder you created.
5 When you want to change what photos are on the iPod just add or remove the photos from the folder you have made and syncronise the the iPod
You can't drag photos or music to the iPod from Windows Explorer, you have to add content through iTunes or you'll not be able to view or play it.

Webdav mapping to windows explorer

I need to set up a script that pushes file content from folders on a file server to portal via WebDAV. Using XP/Office 2003 this should be possible as long as I can map up the portal page group in Windows Explorer under the "My computer" heading as a drive (Z:) rather than under "My Network Places".
Is there some way to fix this?
PS: I´m aware of third party solutions like Sitecopy and Cadaver, but would prefer to use standard Windows functionality to get this going.

hi henning,
there is no way to do this in windows out of the box. i know from a third party tool called webdrive that allows you to map webdav resources as drives on windows.
however using sitecopy you can do the same bulk operation with an open source webdav client that you can get for free.
thanks,
christian

From Firefox, can I open an FTP site in Windows Explorer?

Firefox presents a simple FTP view of files. Firefox does not support active FTP mode, or uploading. Thus, some other program must be used to navigate and work an FTP site.
Windows - Internet Explorer - provides a connection to open and view an FTP site via Windows Explorer.
Why can't Firefox do the same?

You can look at:
* FireFTP: https://addons.mozilla.org/firefox/addon/684
* FileZilla: http://filezilla.sourceforge.net/

Can't see Zen Mozaic content in Windows Explorer

After installing Creative Centrale, I updated my Mozaic firmware to the 64 bit 7 OS. Now, I can no longer see all my Zen Mozaic content in Windows Explorer.
All the songs and playlists are still on the Mozaic, but I only see about 15 songs of the approximately 1000 songs on the Mozaic using Explorer.
Restored my computer to earlier date, and results are same. Have 64bit 7 OS.
I plugged my wife's Zen Mozaic into the same computer and all the songs are visible through Windows explorer.

Hello Mike,
Welcome to Creative forums!
Try cleaning up your player. Run the recovery mode (refer to my post here on how to boot from the recovery mode, #25 for plain Mozaic and #26 for Mozaic EZ series) and select CleanUp->Reboot. See if that helps.

Can't open folder or add directory, window disappears

I am using mac mavericks running latest lightroom on creative cloud.
Whenever I try to add a folder, and navigate to a folder on my internal HD the window disappears. I've tried quitting/reopening and updating Lightroom and nothing changes. The last time I tried it I received the following error: https://www.dropbox.com/s/pucv89mw3uyoe17/Screenshot%202013-12-15%2014.03.09.png

How to Adjust Mouse Settings in Mac OS X Lion
By Bob LeVitus
7 of 9 in Series: The Essentials of Adjusting Settings in Mac OS X Lion
Some Mac OS X Lion users like to customize the way their mouse works. The Mouse System Preferences pane in OS X Lion is where you set your mouse speed and double-click delays.
If you have a notebook Mac, you may see a Mouse icon in the System Preferences application, but unless you have a mouse connected via USB or Bluetooth, it will just sit there searching for a mouse that's not there.
The first item in this pane is a check box that’s new in Mac OS X Lion: Move Content in the Direction of Finger Movement When Scrolling or Navigating. If scrolling or navigating in windows feels backward to you, try un-checking this box.
Next are the features you’ll find in the Mouse System Preferences pane (if you have a mouse connected):
Move the Tracking Speed slider to change the relationship between hand movement of the mouse and cursor movement on-screen.
The Double-Click Speed setting determines how close together two clicks must be for the Mac to interpret them as a double click and not as two separate clicks.
If your mouse has a scroll ball or scroll wheel, you also see a Scrolling Speed slider, which lets you adjust how fast the contents of a window scroll when you use the scroll wheel or ball.
If your mouse has more than one button, you see a pair of Primary Mouse Button radio buttons. These let you choose which button you use to make your primary (regular) click. Conversely, the other mouse button (the one you didn’t choose) becomes your secondary (Control or right) click. This is a setting many lefties like to change. Set the primary button as the right button, and you can click with the index finger of your left hand.
Original article located at...
http://www.dummies.com/how-to/content/the-essentials-of-adjusting-settings-in-ma c-os-x-l.html

Can't see pictures from Ipad in Windows Explorer (usb camera)

When I had around 3000 pictures in my Ipad, there's no problem to delete all at once from windows using the explorer and the ipad as a usb camera. But now I have around 6000 pictures and when I try to see the pictures, windows shows two messages: 1 the usb camera is busy and the pictures can't be accesed and the second message: 0 objects in the image folder is empty (zero pictures).
I don't understand: there's a problem with the number of pictures? Why with less pictures everything works fine? Why I can't select ALL the pictures from a event to delete ALL at once.... the instructions to select more that one picture it doesn't work for me.
The issue with the pictures is draving me crazy! The soluction to select the pictures one by one is just "insane".
Help Please.

It really works!! (Thanx God)...
I was making a mistake while pressing the first picture. There's such kind of technique in the way put both fingers at once. If one finger touch the screen first it doesn't work. it needs a little bit of pressure but not too much. Anywary after a couple of minutes of "training" I can delete many pictures with the minimal effort.
Maybe in the future the "Select All" option will appear to solve this issue at last.
Thanx for the help... This is a really good advice.

Can't view IPad photo's in windows explorer window

I can sync my iPad to my window 7 computer using iTunes software, however in My Computer; I can not see my iPad, nor am I able to drill down to my photo folder on the iPad to import only selected photo's to my computers hard drive. Is this a rights issue, software bug or Microsoft/Apple still fighting?

Currently, for the past hour it has been "Preparing to Import.." after I chose to import directly from the external hard drive.
Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
It sounds like the library on the external is damaged. Restore from back up is the simplest solution.
Regards
TD

Can't transfer files via PC Suite: Windows Explore...

Has anyone else had this problem?
Nokia E61 (3.0633.09.04) via USB cable
Windows XP SP2 + latest patches/updates
PC Suite 3.82.22.0
I can connect and see the phone and install software via PC Suite, but I cannot transfer. It will start to transfer the file and then I get a Windows system error dialogue box asking if I want to send the error to Microsoft or not. :-(
This used to work on my phone. But then my computer crashed and I had to reinstall it. Now it's pretty much the same machine but PC Suite won't transfer files.
Help?
Thanks!

See this (and try manta's message):
/discussions/board/message?board.id=pcsuite&message.id=12465
if that did not help, try this also:
/discussions/board/message?board.id=pcsuite&message.id=11434

'image not available' when viewing ebay auctions. I can view auctions if I go through Windows Explorer. Using Firefox 3.6 & Windows XP. Please assume that I know Jack and at the same time that I don't know Jack when it comes to computers

I can't see any auction photos. Please be specific in any paths that I need to take to fix, like the LOCATION of each step of the way. Thanks

Even though the "option Load Images Automatically was checked, I had to uncheck and save the choice then go back and check it again before I could see eBay images.

New folder created in Windows explorer not visible in Bridge.

If I create a new folder in My Pictures
folder using Windows Explorer, it doesn't show up in Bridge
. I do it that way because selecting
Get Photos from Camera doesn't allow me to select only the photos I want from the card. Why does Bridge not show all folders in My Pictures. I have Windows 7 Home Premium 64 bit. This message is formatting rather strangely.
Thank you

Libraries rely on a good bit of "magic" that has been added to Explorer.
My advice: Avoid them like the plague. They do nothing you can't do by organizing your folders yourself, but they cause a host of problems. I've disabled them in my system and in a year I haven't missed them one bit. I'm all the happier for it.
Windows 7 is a great system, but one of its weak points is [some parts of] Windows Explorer. I think the same people programmed Explorer as made those awful commercials.
-Noel

Windows explorer keeps computing items after accessing a mapped network drive

Our organization has decided to upgrade to windows 7 but we are running into a problem with windows explorer green progress bar hanging after accessing a mapped network drive. When you try to go back to computer or access the control panel after going
3 or more folders deep into the mapped drive, windows explorer just keeps searching.
When you expand the arrow in the address bar it states that it is computing items and never stops.
The only way around this is to right click on libraries and select reset back to defaults and everything is back to normal.
We are deploying this image of windows 7 to over a 1000 computers and we cannot have this problem lingering, does anyone have a solution to resolve this issue. This does not happen in Windows XP.
We have tried to turn off windows search and remote differential compression and this does work but the problem is that you lose all search capabilities in windows. So windows search needs to be enabled. We also tried to adjust the MTU, change GP settings,
and nothing seems to work except to turn windows search off or reset libraries back to default.
We also did some research online and there are so many people experiencing the same problem, with no resolution expect they have to go back to Windows XP. That is not an option for us.
Please help us we would really greatly appreciate it.

Hi,
The issue could be related to searching and indexing feature in Windows 7. I suggest rebuilding the indexing files.
Click Start -> Type
indexing options in the search box -> Advanced -> Index Settings tab-> Rebuild buttion.
For more information, you can refer to:
http://windows.microsoft.com/en-us/windows7/Change-advanced-indexing-options
If the issue persists, you can perform the following troubleshooting steps.
1. Go to update your network adapter drivers and BIOS from manufacture's site manually.
2. If any router is involved, please update the firmware.
3. Perform a System File Checker.
http://support.microsoft.com/kb/929833
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Tags from 'Comments' field in Windows Explorer don't show up in iTunes

I have thousand of files where I allready put tags directly in the comments field in the files proberties in Windows Explorer, but the tags don't show up in iTunes comments field?
I can then manually put tags directly in iTunes comments field and they will not show up in the proberties of the files in Windown Explorer!
So I ask, why on earth aren't those fields (in iTunes and in Windows Explorer) compatible, when all other fields (for example name, artist, year) are compatible?

Okay, thanks for replies and for your time, but the problem continues.
First: I've ripped CD's in different ways (before starting to use iTunes). I've used Nero, Windows Media Player, Lame and imported mp3 files directly from the internet. Some files have been through Flash Renamer and TigoTago. After importing the files I've tagged them with comments and other stuff directly in Windows Explorer. And then I decided to use iTunes because of buying iPods and playing music through AirPort Express.
What I've tried to right now:
I've tried to check files with MP3Val, but it said the files were OK.
Then I tried - with another laptop - to install I new iTunes program (English language to be sure and there after I imported/ripped a new CD using iTunes to import. Before importing I put a tag in the Comments field in iTunes and it never showed up in Windows Explorer Comment field. I also tried after that to put tags directly in Windows Explorer Comment field and add the files once again to iTunes library, but again, no comments in iTunes. Also again put tags in iTunes, but no tags in Windows Explorer.
Then I did more or less the same using Realplayer to import the CD, but with the same negative results.
*Then I went back to my old laptop, imported a CD using iTunes and then tagged the comment field in Windows Explorer and suddenly I got comments in iTunes! But the comments look like this: "00000000 00000210 000008E8 0000000000775908 00000000 0040E5E1 00000000 00000000 00000000 00000000 00000000 00000000".*
I don't know what to do with this?
And apparently, it's only when importing new files using iTunes to rip the CD, that this happens. Otherwise, nothing happens at all.

Can field point folder be mapped in Windows Explorer?

Similar Messages

Maybe you are looking for