Can find E-Business Control Center

I'm running portal 4.0 on solaris and currently trying to get things working. I've managed to get most up and running but I can't the e-business control center up and running? It looks as if I'm missing the files which has something to do with the EBCC?
regards
Stig

Stig,
For the GA Release of WebLogic Portal 4.0 EBCC is available on Windows NT/2000 only.
You have to download EBCC separately and then install it on a Windows NT/2000 box.
If you go to download site and select the "Sun Solaris" platform ans then "Procees to Download",
you will find the link for downloading EBCC just below the link for dowloading portal 4.0.
EBCC for Solaris will be available with Service Pack 1 which is planned to be available around
mid-December.
Hope that helps,
Michel.
"Stig Boye Andersen Aatland" <[email protected]> wrote in message news:3c00f288$[email protected]..
I'm running portal 4.0 on solaris and currently trying to get things working. I've managed to get most up and runningbut I can't the e-business control center up and running? It looks as if I'm missing the files which has something to do
with the EBCC?
>
regards
Stig

Similar Messages

Problem with E-Business Control Center

Hi,
I am trying to create a content selector using the e-business control cnter. When
I try to save it I get the following error.
The content selector is not complete. Please complete before saving. Could not
save the rule. Could not find GlobalContentSelectors to save the rule.
Can somebody help me with this?
Thanks and Regards,
Subramaniam

Hi,I have also somewhat similar problem in creating content selector using e-business control center.The problem is that in the Window titled "Select Customer Segments", there are no radio buttons for specifying whether Qualifying visitors may belong to Any or all of these segments. Although it is mentioned in the documentation yet not available in actual.So when we try to save it the following error appears"Atleast one selected clause has not been completed. Offending clauses: [Action clause has not been completed.].Please tell me what to do?Regards,Atif

Launching a Preview Session Outside the ATG Business Control Center

I have setup a remote preview server on ATG 10.1.1. Everything works great when viewing it inside the BCC however I’m wondering how to access the preview server outside the BCC. According to the ATG documentation, it sounds like that’s possible. The ATG docs state:
“Users can preview project asset changes outside the framework of the Business Control Center. For example, you might want employees or outside reviewers who do not have access to the Business Control Center to evaluate changes to a Web application while it undergoes development. In this case, you can enable preview on servers that do not have the Business Control Center installed, then give reviewers URLs to the launch pages on these servers. They can invoke these URLs from any browser window.
Note: Users who are not logged into the Business Control Center can invoke preview sessions only with URLs to a server where the Business Control Center is not running. In order to avoid security breaches, URLs to preview sessions on the Business Control Center server are blocked.”
This is the only information I found in the documentation that talks about viewing preview outside the BCC. Based on this limited information, there are a lot of questions I have about how this actually works.
1. Any attempt to hit any page on my remote preview server outside the BCC, I see the following exception:
“ERROR [PreviewProfileRequestProcessor] An attempt was made to preview a project without logging in as a user with access to publishing assets. If you are running a local preview instance, the preview URLs registered with the PreviewURLManager may be misconfigured. Ensure that the preview URLs are configured with the same host and domain name used to access the BCC server. This preview request URL is: http://localhost:8280/sample_catalog/index.jsp. If you are running a remote preview instance, the Preview feature does not support remote preview on servers running the BCC. Ensure that the remote preview instance is not running any of the BCC related modules. If you received this error and did not try to perform a remote preview, then you may need to disable preview in the current web application by setting the atg.preview context parameter to false in the webapps web.xml file.”
I am not running the BCC on this instance so I’m not sure why I am seeing this. Is there something configuration I'm missing here?
2. I don’t understand where these urls would come from that a reviewer would use to preview the application. There is no "remote preview url" when previewing a page from within the BCC to copy and send to a reviewer so how would a BCC user send a url to a reviewer?
3. Assuming the reviewing knew which page to hit in the remote preview server, how would that page use the assets from a project? Should the project id of the project be include as a param to the url?
- Michael

Shaik, if only it was that simple :( Do you have much experience working with remote preview or are you just guessing here like I have been? In order to help clarify my post though, here is the scenario that describes the basis for my questions:
A business user is working on a project within Merchandising of the BCC
1.     The user makes a change to a category
2.     The user clicks the Preview Button on the tool bar
3.     The system displays the Preview launcher screen
4.     The user selects a pre-configured profile user and page for the preview session
5.     The user clicks the Flexed based launch button
6.     The application displays within the context of the BCC browser/tab
7.     The business user would like to send that url to a reviewer who does not have access to login to the BCC
What happens from step 6 is that a giant iframe launches from within the context of the BCC browser/tab. If you are using remote preview, it is still an iframe and still displays within the context of the BCC browser/tab, the only difference is that the BCC is proxying information to the preview instance in order to initialize the preview session to display the application in the context of the business user’s project. The url the user sees in the browser is the url for the BCC, not the remote preview server. Because the UI for Merchandising and Preview is built using Flex, there is no way to click on the Preview button to open it up in another tab or browser. The only way your suggestion would work is if there is a way to configure the Flex UI to have it open up preview in a new browser/tab which I doubt is possible.
I hope this helps better explain my post. With that said though, this brings me back to my original questions.

I can't access to control center (Swipe up), notification center (swipe down) and camera on my home screen when i put my phone down

I Just bought my iphone 6 64GB iOS 8.1.2 few days ago , It can't access to control center , camera (swipe up) and notification center (swipe down) on home screen when i put my phone down (it also hardly to access assistive touch too ) . Is anyone having this situation too ?

Are you using a iphone case or otterbox? If so remove the case and see if you can swipe up.

I HAVE IPHONE 4 i am facing 2 problems on the IOS 7 GM 1- I CAN'T SLIDE THE CONTROL CENTER AND NOTIFICATIONS CENTER UNTIL I MAKE RESTART 2- ONCE I RECEIVING CALL IF I PRESS TO REMIND ME LATER THE I PHONE MAKE RESTART SOMETIME

DEAR ALL,
I HAVE IPHONE 4 i am facing 2 problems on the IOS 7 GM 1- SOMETIME I CAN'T SLIDE THE CONTROL CENTER AND NOTIFICATIONS CENTER UNTIL I MAKE RESTART 2- ONCE I RECEIVING CALL IF I PRESS TO REMIND ME LATER THE I PHONE MAKE RESTART SOMETIME.
<Email Edited by Host>

Restore as a new device, then sync your apps and contacts.
Do not restore from backup.
If that does not resolve it, then the next step would be to visit the Genius bar at an Apple store.

Can't install Intel Control Center (former MSM) in Windows Server 2008 R2

I'm running WS2008 R2 with SP1. Everything is great but I need to add monitoring of my RAID1 system volume. It's installed on onboard Intel chip. Latest driver installed succesfully but Intel Control Center asks for .NET 3. How do I install it? It's not
available in Windows Update.
Thank you.

Hi,
According to the following link, there is no version of Intel Desktop Control Center for Windows Server 2008 directly.
http://downloadcenter.intel.com/SearchResult.aspx?keyword=%22%22desktop+control+center%22%22
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding
this product's performance or reliability.
If you can confirm the required version of .NET Framework is installed properly, you need to contact the Intel support for further assistance.
Just for your reference, here is where to download the Microsoft .NET Framework 3.0 Redistributable Package:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=10cc340b-f857-4a14-83f5-25634c3bf043
Actually, .NET Framework 3.5 builds incrementally on the new features added in .NET Framework 3.0.
Thanks.
Nina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I can't use the control center from my lock screen.

I just updated my iPhone 5c to the ios 8.0.2, but previous to that update I was able to use the control center from my lockscreen. But now, I can't. I already tried to disable restrictions and it didn't work. Please help.

Check the settings for this And make sure that the availability of the Control Center from the Lock Screen is turned on.
Settings > Control Center > Access on Lock Screen
If it is turned on there try a reset of your iPhone. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.

Can't bring up control center on iPad 2 in portrait mode!

I just upgraded my iPad 2 WiFi to iOS 7.0.4 and noticed a strange bug:
No matter what I do, I can't bring up the control center when holding the iPad in portrait mode! But when in landscape, it'll come up with a swipe just fine!
More strange is that when I hold the iPad upside down (home button on top), the control center shows with swipe up!
Anyone has any clue what's going on or how to solve this??
P.S. There's also another bug that may be related to this: When held in portrait mode, I also can't swipe the notification center back up. It looks like it's stuck at the bottom. Only pressing the home button send it back up.

I would call this a quirk in your upgrade rather than a bug, but try this and see if it fixes it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Can't connect to Control Center

Hi,
I am able to connect to control center and deploy mappings as Repository Owner but when i log in as Target user and try to open control center i get nothing , no error . Then i tried to expand project opened the editor of the configuration now i get the following error
ORA-03106: fatal two-task communication protocol error
ORA-03106: fatal two-task communication protocol error
     at oracle.wh.repos.pdl.foundation.Sync.getCurrentVersion(Sync.java:143)
     at oracle.wh.repos.pdl.foundation.Sync.isSyncRequired(Sync.java:103)
     at oracle.wh.repos.pdl.foundation.Sync.isSyncRequired(Sync.java:72)
     at oracle.wh.repos.pdl.foundation.Sync.isSyncRequired(Sync.java:62)
     at oracle.wh.repos.pdl.foundation.Sync.syncFCO(Sync.java:189)
     at oracle.wh.repos.pdl.foundation.Sync.syncACLContainerForFCO(Sync.java:232)
     at oracle.wh.repos.pdl.foundation.Sync.syncFCO(Sync.java:172)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.syncFCO(SecurityModuleImpl.java:1290)
     at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:108)
     at oracle.wh.ui.owbcommon.OWBWizardDefinition.securityCheck(OWBWizardDefinition.java:549)
     at oracle.wh.ui.owbcommon.OWBWizard.initialize(OWBWizard.java:308)
     at oracle.wh.ui.owbcommon.OWBWizard.<init>(OWBWizard.java:168)
     at oracle.wh.ui.owbcommon.OWBWizard.<init>(OWBWizard.java:147)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchDefinition(IdeUtils.java:1188)
     at oracle.wh.ui.owbcommon.IdeUtils.showPropertySheet(IdeUtils.java:203)
     at oracle.wh.ui.jcommon.tree.WBRepositoryObjectTree.launchEditor(WBRepositoryObjectTree.java:486)
     at oracle.wh.ui.jcommon.tree.WBRepositoryObjectTree.mousePressed(WBRepositoryObjectTree.java:224)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:222)
     at java.awt.Component.processMouseEvent(Component.java:5097)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3195)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:480)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
I can't understand what is the issue . Any help would be great
GV
Edited by: Suresh_G on Dec 3, 2009 2:40 PM

Did you make sure that the Control Center Agent is running on your database server?
Test it by running the show_service.sql or service_doctor.sql as user OWBSYS. The scripts can be found in directory +$OWB_HOME/owb/rtp/sql+. If the CCA is down or wrongly configured, e.g. you changed OWBSYS' password after installation, such that it can't connect, the service_doctor script will tell you. Please correct any errors or misconfigurations and start the CCA afterwards using the start_service.sql script from the same directory.

Where can I download VAIO CONTROL CENTER SOFTWARE (not UPDATE) for WIN8?

My model is SVE1513RCXB. Thanks for your help.

Hi mlbnguyen2610,
Thank you for considering Sony Community!
Based on my end, the original Operating System of your Vaio SVE1513RCXB is Windows 7. Did you install a retail copy of Windows 8 Operating System? Usually the originally shipped version of Vaio Control Center is in the recovery partition. Kindly try this option.
Download and install VAIO Care™ (Desktop) Software, this is under Windows 8 option located on eSupport.sony.com. Open Vaio Care (Desktop) -> Advanced Tools -> Restore and recovery -> Reinstall applications and drivers -> Then look for Vaio Control Center and follow the on-screen instructions. (We have different versions of Vaio Care. Just follow the instructions applicable in your unit).
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope these help.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

ORACLE ATG Web Commerce Business Control Center language

Hi!
I have just installed ATG 10.1.1 and my BCC is showing a mixture of German and Englisch?
Is there an option to choose the language I want to have shown in BCC?
And please don't answer with change your browser settings etc. !
Thanks and regards,
Heiko

There is a number of things that you may have to do, depending on the locales of your ATG server and browser:
- start the ATG instance with -Duser.language=en -Duser.locale=US
- in BCC, go to the Personalization section and set the language of your user to English
- set your browser locale to English
A combination of those configurations will set the BCC language to English.
By the way, make sure that your BCC is set to English before trying to configure the deployment, especially agent. At least in 10.1, configuring deployment (and who knows what else) doesn't work in languages other than English.

Disable control center if using Find my iPhone

If you misplace your iPhone and you go to use find my iPhone , it can send a tone as you know, but the problem is if someone has your phone they can use the !Control Center to put your phone in Airplane Mode'. We had someone that worked in a restaurant found the phone and then put it in airplane mode so it would no longer make a sound. The only way we got it back was because we showed the manager the map that show it was still there. So he ask each person to check, and one person said that they was going to turn it in, but forgot. But why did she out it in air plan mode.
So we no longer have it so you can slid up and use the control center if the phone is lock.

No.

Can't open Control Center on the Lockscreen after using Siri

Hello everyone,
I have got a little bug since iOS 8 and still be there in iOS 8.1 on my iPhone 5S (32Go).
After requesting Siri something and get back to the lockscreen, i can't open the Control Center but I can still open Notification Center. After lock my phone and turn it on, I can open again the Control Center.
Is there someone else with this little bug ?
Thanks you all
Bye

No, I do not. I even tested it as soon as I saw your post. With the phone locked, I asked Siri to do something, after tapping to close it, it went back to the lock screen, I swiped upwards and Control Center came right up. Are you swiping from off the screen slightly when you start?
If a restart and reset have not fixed it, then the next two steps in user troubleshooting are restore from backup, then restore as new.

Can not access control center on iPhone 5

I can not access the control center by swiping up. It doesn't matter which screen I'm on. It is turned on in the settings to be accessed in apps and the lock screen.

Do you have a case on the phone? If so, what case? If you do, then try removing the case and see if it works.
If not, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. After that, try again.

Can't see process flow locations in control center

Hi there
We have process flows which pointing to process flow locations. Can see these locations in Design Center but when try delopy the process flows can't since the process flow locations are not visible.
How do you make these locations visible in the Control Center.
Many Thanks

Hi there
found out how to do this - double-click the control center and see the various locations it can see on the right hand side - the process flow ones were on the left - simply added them to right and can now see in control center and deploy.
Many Thanks

Can find E-Business Control Center

Similar Messages

Maybe you are looking for