Can Firefox be made to reopen after a crash with a list of several previous sessions like Seamonkey please (rather than just one as currently)?
When I reopen Seamonkey there's a list of previous sessions from which to choose. If in Firefox I accidentally lose the session during a crash, or accidentally hit 'start new session' instead of 'reopen', the previous session seems gone forever and I have to search through history to try to reassemble it. I'd like to keep the record of these previous sessions until I decide to delete them please - is it possible?
Nothing else to add really - this "multiple saved sessions" facility may already be available but I don't know how to access it - otherwise it is a feature request.
Thank you
PH
(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.
Similar Messages
-
How can I create an effect to cycle through several sets of 12 thumbnail images rather than just one
Hello
I've searched everywhere i can think of and had no luck so thought it's about time i asked for help.
How do I create an effect where a group of 12 thumbnail images (all with clickable links) can scroll across by clicking a button to reveal another set of 12 thumbnails and so on without having to refresh the page, im assuming jquery can help but every single slideshow or scroll effect I've come across is for single images and not a set of images.
Its a gallery part of my website and the images are in sets of 4 in 3 rows.
All and any help will be greatly apprieciated!
AnthonyI think what you want is a Carousel Scroller. See Demo and Examples
http://dimsemenov.com/plugins/touchcarousel/
Nancy O. -
I've been using this web-based email system for many years. Up until last week, every time I wanted to reply to a message, I simply clicked reply, and got a new message draft, with all the previous exchanges neatly tacked on the bottom in reverse chronological order. Now what happens is that I get a mass of HTML gobbledygook, which makes it very difficult to make out what the previous message said. This only affects the "view"ing of the new draft as when I send it, it comes out clean to the recipient. And it only affects my main desktop computer. (Windows XP).
Hi,
I have my Contact Testers page which has this HTML
(opening tag here) a href="aim:goim?screenname=ralphjohnsr&message= Hi+!,+I+came+from+your+website,+ralphjohnsuk." (closing tag here) (opening tag here) img align="right" alt="Webmaster iChat Online Status Indicator" border="0" src="http://big.oscar.aol.com/ralphjohnsr?on_url=http://www.ralphjohns.co.uk//images/ RalphOn.gif& off_url=http://www.ralphjohns.co.uk//images/RalphOff.gif" /(closing tag here)(oen tag)/a(close tag)
I have added some linebreaks to make it fit the page here.
This is obviously done using a valid AIM login name and the a href ="aim:goim? will launch an AIM Client and Message me.
As you say you would create a New Apple ID then this would be iCloud and an AIM valid Name (keeping the Password to 16 characters or less).
I am not aware of an iMessage equivalent that would do this to a Phone or iPad or to the Messages Beta as an iMessage.
To be clear.
What this HTML does is launch an AIM client (App) on the computer or the person viewing my page and then start a chat with the IM included in the HTML.
To do that it queries the AIM servers as to whether I am On line or Line and show a pic relevant to that status. (it does not stop Off Line IMs but I am set up for that. It also does not say if I am Available or Away.)
Edit to get html to show (not sure how to work this Raw code thing which dispalyed in the Reply wysiwyg screen.
8:29 PM Saturday; March 31, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Message was edited by: Ralph Johns (UK)
Message was edited by: Ralph Johns (UK) -
Can firefox be made text only yes text only
simply put can Firefox be made a text only browser and I do not care which version of Firefox would have to be used
simple and to the pointhello, you can disable the loading of images in firefox > options > content.
[[Settings for fonts, languages, pop-ups, images and JavaScript]] -
Reinstall Acrobrat Pro X. Can't reinstall Acrobat Pro X after computer crash
I am trying to reinstall Acrobat Pro X after a compter crash. I enter the correct serial number but then get asked to select a prior product, in my case Acrobat Pro 9, and enter the serial number (this is the number that appears in my account), but there is nowhere to enter the serial number. And if I try to reinstall Pro 9 it won't let me. Do I have to deinstall Pro X first, or what? ALl input welcomed, thanks. Shanter
Thanks Bill, that seems to have done the trick. I am now successfully
reinstalling Pro X.
2014-10-14 21:10 GMT+02:00 Bill@VT <[email protected]>:
Reinstall Acrobrat Pro X. Can't reinstall Acrobat Pro X after
computer crash created by Bill@VT
<https://forums.adobe.com/people/Bill%40VT> in *Acrobat Installation &
Update Issues* - View the full discussion
<https://forums.adobe.com/message/6825647#6825647> -
I realize this is off-topic for this particular forum, but I hope it may help some readers. Since this forum is "where I live" in the Adobe forums, I wanted top share it here first. Perhaps after some feedback to refine things, I may post it elsewhere (another forum perhaps, and/or my blog).
As I was answering a question from someone, finding myself again able only to refer to them by their brief Adobe ID (which often seems to have no connection at all to their name), I wondered:
Do people realize that they can change their forum identity so that their real name (or whatever other identifying info) shows up rather than just their brief Adobe ID? It's just that some folks would much prefer "talking" with someone by refer to them by their real name (or at least something more than just their Adobe ID).:-)
I suppose some may choose intentionally to remain “relatively anonymous” with just that ID to identify them, but I think many more simply don't know that they *can* change what's shown. You can. But it seems we can't do it inside the forums software itself.
Instead, we just need to modify our "Adobe account" to associate a name with our ID (which of course could have benefit in other places where our names might be used).
You can do by going to https://www.adobe.com/account.html, then choose “My Information” (and login if prompted). Then, on the page shown, under the section “My Personal Profile” you can fill in the first and last name fields. (You can also your password here, and it seems even your username.)
It may be possible that after making that change, you would need to sign out and back into the forums (forums.adobe.com) for the change to be picked up, but if it is, you should then see "Welcome [your name]" in the top right corner of the forums page, if it's worked.
And now any forum messages you create should have that name at the top of the message when people read it, and it would also be in the FROM address if people receive it as email (note we're NOT talking about your email address. That is never shown. If people reply to forum messages received by email, the reply goes back to a generic forum email address.)
Hope all that's helpful to someone.
BTW, I had done the change myself a long time ago, so I'm retracing these steps now for others to do it. If you try it and can confirm that it works, please drop a note here. Thanks.It works, thanks!
-
i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?
i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks -
Can you view a whole year in iCal, rather than just day, week, month?
Does anyone know if there is a plug in or something (alternative app. even) that allows you to view the whole YEAR rather than just a month at a time? I want something that will function almost like a wall planner.
I asked this question about two years ago! I'm surprised we still can't print a year calendar. I've been using an Apple Calendar program from 1996, which was fun because I could add icons, and frames, etc. I was using it up until last week when I installed Leopard. Gone is Classic and my calendar program along with it!
Another problem I've had with iCal is the inability to print it in portrait mode. There was a work around on these boards that worked, but doesn't now. Sigh -
I have two Apple ID accounts, with which I purchase music, I would like to consolidate those accounts into one, how can I do it?
Stop using one. Everything you've previously purchased from it has that Apple ID stored inside the file, which can't be changed.
(66245) -
Can a period be entered in the Confirmation rather than entering one da
Dear experts
Can we enter the period in Confirmation , rather than entering one day each .
Currently in the sytem if i enter a period ( say 25-05-2009 to 29-05-2009) , system throws error saying it can accept only 24 hours .
This will avoid too many enteries if the Engineer is out for a month at particular location.
Can it be possible thru any configuration , if so pls let me know the nodes.
regards
RajeshHi Shanthala
Thanks for your update. I have checked the same . Here the duration of job comes with the line item , I checked the date profile for the line item category. Can you tell me which is the date rule we suppose to choose to get the duration for more than one day ie 24 hours .
Regards
Rajesh S -
client wants social links to "share" rather than just link to... how do I or can I do this with Muse
Thanks. do the others (twitter, pinterest...) have separate codes available? This is what my client is asking for:
-
Firefox 26 does not load the home page. Instead, it loads the previous session, irrespective of what has been entered in "Options". The browser is running in Win 7.0 64-bit; Norton Internet Suite 21 provides the security functions. There are certain "cloud" solutions also running such as Google Drive, Box, Skydrive and Cubby. The browser behaves similarly in all my machines (the setup and OS is similar to the one described above) and no amount of resetting of "Options" seems to affect it . Nor is it affected by the manner Firefox is closed. It is obviously a bug that needs to be fixed.
u wait for firefox next update
otherwise
1. go to firefox tab .
2. click on help ->trouble shooting information.
3. reset ur browser .
ur problem is solved -
After windows crashes with firefox open profile always needs to be recreated
Anytime windows crashes or my computer unexpectedly restarts and Firefox is open, the "restore session" screen comes up, then no matter what (if anything) is clicked, Firefox promptly locks up.
I have to create a new profile and copy over the profile folder contents every single time. It is very annoying and frustrating.
I have tried deleting the entire profile folder after the crash, no change.
I have uninstalled and reinstall Firefox (with and without thunderbird), no change.
I have even go through the registry and manually deleted any mozilla and firefox key.
It has been going on in releases 4.x, 6, and now 7.0.1Why not back up your profile (back to the Firefox parent directory), so that you can put it back easily? That way, you save the profiles.ini file as well as the profile.
http://kb.mozillazine.org/Protect_the_profiles_contents -
HT1386 My phone can not activete to the server after updating it with ios 6.1.3 update
Am using an apple 3g after updating it with ios 6.1.3 update it is failling to activete th the server.What should i do to have it work?
John Bwalya wrote:
Am using an apple 3g ...
The iPhone 3G can Only update as far as iOS 4.2.1
John Bwalya wrote:
... after updating it with ios 6.1.3 update it is failling to activete th the server....
See this discussion.
https://discussions.apple.com/message/21189708 -
Can't Activate PRE9 and PSE9 after computer crash
Can't Activate PRE9 and PSE9 after computer crash
You need to contact support directly for activation/deactivation and other installation issues. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away.
To get help now click here for product support
Maybe you are looking for
-
Geting "Incorrect client ID.The stub is not connected yet" during deploying
Hai all, I am unable to deploy a J2EE application from Deploy Tool. The following trace is comg in defaultTrace.trc.2 #1.5#000D9D9FAF62003C0000000900000F080003FC0472DB309D#1121520967258#com.sap.engine.services.rmi_p4##com.sap.engine.services.rm
-
How to find out the unit of Field object?
Dear Friends , I Placed 4 fields in report . Just i want to get the position of field object in report using vb.net code . In report i selected the field and click f4 button , property window is open , in that its showing Top = 390 , left = 295 . In
-
When click on a file in a portfolio Acrobat Pro kicks me out?
K, So I have created portfolios on Acrobate Pro and now when i click on a file in a portfolio i get kicked out of Acrobat. It automatically closed and asks me to send a message to Apple. I called Apple and they said it was my Acrobat? Does anyone k
-
[SOLVED] Steam troubles. Segfault after login.
Hello. I'm usually pretty good about solving my own problems, but this one has me beat. So, yay, first post. Recently my nephew brought me his computer for a nuke and pave, and since he doesn't have a legit Windows key and I don't use Windows anymore
-
Using oracle procedural gateway to connect to mq series
Hi, I am working on setting up my connection to export data from oracle database to db2 using mq-series. MQ-Series client software and oracle procedural gateway v9 are installed on HP-UX . initsid.ora & initsid.gtwboot file for the gateway are config