Can FlexNet Service Be Re-installed?

Is there a way of installing the FlexNet service on its own? We have uninstalled Acrobat Pro 9 which has also removed FlexNet, so now users of PhotoShop CS3 and InDesign CS3 are getting license errors.
Other than having to re-install Acrobat Pro 9, is there any way of just installing the Flexnet service on its own? I have tried the license repair tool, this successfully re-installs FlexNet, but there doesn't appear to be a way of running this silently, it always prompts the user, which isn't practical for 100s of users.
Any tips greatly appreciated!
Nick

First thing to say is that CS4 and Acrobat 9 are not officially certified for Windows 7 x64. They generally run OK but there are no guarantees in your case it will work any better when you reinstall.
If there's an issue with Acrobat specifically, first point of call should be the Repair Installation option from Acrobat's help menu. If that doesn't help, you can add or remove programs from the CS collections without affecting the entire install: Go to your Add/Remove Programs tool on the windows Control Panel, choose your CS4 entry and click Modify. The checkboxes control what is and is not installed, but an uninstall and reinstall of Acrobat will reset it to the base version, and the subsequent updates will need to be re-downloaded (you can't apply them all at once).
You don't need to deactivate anything unless it's being moved to a new computer.

Similar Messages

Is there a package for installing the FlexNet service only?

Hi,
we are trying to virtualize Acrobat Pro 9 using Softgrid/App-V. Unfortunately the FlexNet service does not support virtualization. According to the virtualization community a possible workaround would be a local installation of the FlexNet service on our terminal servers.
To do that I need an installation package for the FlexNet service only or command line parameters for installing the service from the normal package without installing acrobat.
Is such a package or command available somewhere?
Thanks!

There is no standard iView for ME53N, but you can create you own iView which will point to any SAP Transaction in either WinGui or WebGui Mode and assign it to end users.
Refer to the following standard SAP help:
[http://help.sap.com/saphelp_nw04/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm]
Regards,
Trikanth Basetty

I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed. No other programs have similar problem. Any suggestion what can be done?

I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

How can I get what the service pack is installed on my machine from java co

Hi..
Advanced Thanks to everyone, who visit this thread..
In one of my program, I need to find, my Operating System details from java code.. ofcourse I can get OS type and version by System.getProperties().., But especially I need to get what the service pack is installed.. SP1 or SP2.. Can anyone tell me how can I get that info..

Prasad.Kollipara wrote:
Hi boss..
Not to hack the system or not check whether it is hackable or not..
I am developing a tool and before installing it, I need to verify whether it satisfy the requirements or not..
My tool need Minimum Windows Server 2003 OS with SP2..Why would a Java application need that? Sounds like something that should have been done in C#.

What can be done when Cold Fusion 9 ODBC Services will not install?

What can be done when 64-bit Cold Fusion 9 ODBC Service will not install on a Windows Server 2008-R2 64-bit machine? Yes, most of the things in other discussions have been tried.

Hi GDMVU,
Save the below code as CF9_RemoveOdbc.cfm
<cfscript>
//login using admin
//createObject("component","cfide.adminapi.administrator").login("administrator_password" );
createObject("component","cfide.adminapi.administrator").login("admin");
//instantiate datasource object
myObj = createObject("component","cfide.adminapi.datasource");
</cfscript>
<cfscript>
     writeOutput("Removing ODBC Services...<br>");
     returnValue = myObj.removeODBCservice();
     writeOutput("ODBC Services removed");
</cfscript>
Save the below code as CF9_InstallOdbc.cfm
<cfscript>
//login using admin
//createObject("component","cfide.adminapi.administrator").login("administrator_password" );
createObject("component","cfide.adminapi.administrator").login("admin");
//instantiate datasource object
myObj = createObject("component","cfide.adminapi.datasource");
</cfscript>
<cfscript>
         writeOutput("Installing ODBC Services...<br>");
         returnValue = myObj.installODBCservice();
         writeOutput("ODBC Services installed");
</cfscript>
Now try the following steps:-
Change admin password in above .cfm pages for your CF 9 server.
Use RemoveObdc cfm page first to remove any existing faulty/corrupted Odbc services.
Use InstallOdbc Odbc services to install Odbc services there.
Hope this helps.
Regards,
Anit Kumar

I have installed the itunes but is not installing the Apple Mobile Device service it always that i try to install the itunes i have the same problem the error that appears is that the installer can run the service but the service is never installed

Hi i have a problem I try to update my iphone but i can not do it, because every time that i try to install itunes appear an error that can start the Apple Mobile Deviece, and I could see that this service is never installed so that's why the installer can make run the services, does anybody know why this happen? My OS is windows 7, and I'm getting mad because i can update my music in my iphone thanks.

Hello Skip Grantham,
Thanks for using Apple Support Communities.
it may be necessary to remove all traces of iTunes and related software components from your computer before reinstalling iTunes.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

How can Reader v 9 be installed to a volume other than c:?

How can Reader v >9 be installed to a volume other than c:? such as g:?
and is there a distrubution executable available so Reader can be installed on a machine that is not connected to the Internet?

download the .exe from the ftp service and use it to target the install directory:
ergo
ftp://ftp.adobe.com/pub/adobe/reader/
and pick OS and version and language thus:
ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.5.0/en_US/AdbeRdr950_en_US.exe

I have installed Smile Box and can't get it to install, I am running a Mac Powerbook G4 10.5.8 1.33 GHz help?

I am running a Mac Powerbook G4 OSX 10.5.8 1.33 GHz and can't get Smiebox to install, it downloads the program just fine but will not let me install it, can someone tell me why?

Hi SusieQ,
Seems they have no idea what they're doing over there, to wit...
Mac Snow Leopard and above*
In general, we recommend a multi-core processor and at least 2 GB RAM.
Connection to the Internet is required; Smilebox is optimized for a high-speed broadband connection, and that faster connection will give you the best performance.
Smilebox uses your Internet browser and Flash11 (or higher) to run. We automatically detect whether Flash is installed and will help you install the free download if need be. You will also need javascript enabled. Your internet browser and any security software (firewall, antivirus) you have on your computer may need to be configured to "allow" Smilebox internet access. Please refer our article on - I have security software (firewall or anti-virus software) that I suspect is blocking Smilebox. What can I do to fix that?
If your computer shipped with Windows XP, Windows Vista, Windows 7 and Windows 8 you can install run Smilebox; we do require that Windows XP computers have Service Pack 3 installed.
To run Smilebox on your Mac, your Macintosh should have an Intel or Power PC processor on a G5 or higher (if your Mac was made in the past 3 years, it should meet this requirement), 2GB or more RAM.
*Smilebox will not run on earlier versions of the Mac OS X including Leopard (10.5).
Snow Leopard is 10.6.x, no G3/G4/G5 PPC Mac can run 10.6 or above.
So this line is wrong, or two other lines about Snow Leopard are wrong....
To run Smilebox on your Mac, your Macintosh should have an Intel or Power PC processor on a G5 or higher
https://smilebox.zendesk.com/entries/23872226-What-are-the-system-requirements-t o-run-Smilebox-

How can I get Verizon to install fiber in my neighborhood? Have been waiting 10 years.

How can I get Verizon to install fiber in my neighborhood?
I have been on the notification list for nearly 10 years with no action.
Current DSL download speed is only 3.0 Mbps, the max available for copper twisted pair, so I am told by tech support.
Unless Verizon will install fiber in my neighborhood, my only option to obtain faster internet service is to change to another provider, though I would prefer to remain a Verizon customer.
Any suggestions for alternate providers, under the circumstances?
Thanks
Solved!
Go to Solution.

Forget it. I've been waiting 13 years and every town around me has Fios, in fact my town is a small [27k population] city who provides the phone exchange numbers for the surrounding towns with Fios! Figure that out. I myself have given up and am moving on to Time Warner for my internet and phone and will not return even if fios does appear before the end times.. They are actually cheaper than verizon when flat rate phone service and real broadband speeds are figured in. Verizon only has last century's DSL technology available. Leave verizon, they don't care if do or not.

Can't uninstall or re-install Vista drivers (Boot Camp 2.1)

I'm having problems with my MacBook Pro's bluetooth support in Vista under Boot Camp so I thought I'd try to re-install the Boot Camp 2.1 drivers. However, whenever I run the setup program, it just gives me a useless error message saying it encountered an error before it could start the install, and to please try again later. Rebooting doesn't help.
So I thought maybe I could uninstall all the Apple stuff then start again. But when I try to uninstall "Boot Camp services" from the programs and features control panel, it starts to uninstall, but then gives up silently as it nears the completion of the "gathering information" dialog.
So I can't uninstall or re-install this thing. Anyone know how I can fix this?
Thanks!

Ric - wrote:
I'm having problems with my MacBook Pro's bluetooth support in Vista under Boot Camp so I thought I'd try to re-install the Boot Camp 2.1 drivers. However, whenever I run the setup program, it just gives me a useless error message saying it encountered an error before it could start the install, and to please try again later. Rebooting doesn't help.
So I thought maybe I could uninstall all the Apple stuff then start again. But when I try to uninstall "Boot Camp services" from the programs and features control panel, it starts to uninstall, but then gives up silently as it nears the completion of the "gathering information" dialog.
So I can't uninstall or re-install this thing. Anyone know how I can fix this?
Thanks!
It may be too late, but have you tried going into the drivers using Vista's control panel and either removing the drivers or reverting to precious drivers?

Vista Service Pack 2 install error message and Realtek incompatibility

Just want to inform that service pack 2 install gave me an error message when I installed it on a clean rebuild of my Toshiba laptop. Something about an incompatible driver. As I had already installed the latest drivers from Toshiba pages, I choose the 'ignore and continue' action at install, and the update successfully completed.
I then ran the Windows Upgrade advisor utility (just search a Microsoft website to find it) which checks for hardware/driver compliance with Vista.
Their report says that the Realtek RTL8187B wireless adapter driver has an issue with Vista, and recommends that the latest driver be installed. Since I do have the latest Toshiba driver installed, what is the procedure to follow?
The wifi connection with this laptop functions well, with the only 'problem' being a 45 second delay when waking up from sleep mode to being able to open a new web page. This is the time it takes to establish a connection to my router/modem.

> Their report says that the Realtek RTL8187B wireless adapter driver has an issue with Vista, and recommends that the latest driver be installed. Since I do have the latest Toshiba driver installed, what is the procedure to follow?
You could try the Realtek WLan driver from the Realtek driver page.
There you can find the latest Realtek drivers for different Realtek chips.
But to be honest I would not be worried about this massage.
Something like that can happens always after any installations of the Microsoft service packs.
I remember that many drivers were not supported by SP1 but they ran properly
So take it easy ;)

Reporting Services - Multi instance instalation

Hi
I instaled SQL Server standard edition named instance ("DEV1") on a machine with a previous default instance of SQL Express and RS.
I also instaled a new RS instance using this new SQL Server instance using new endpoints, ex:
http://myserver/reports_DEV1
but I get HTTP 404 Not Found.
The previous default instance on http://myserver/reports is still working fine. it opens
http://localhost/Reports/Pages/Folder.aspx
and I noticed that folder.aspx exists only once in the whole file system. Should I have the rs files duplicated on each instance directory?
What can be wrong with my instalation?
Thanks,
DD

Hi DevDiver,
According to your description, the Report Manager URL for your new Report Server instance can be accessed and return 404 error. However the Report Manager URL for the previous instance works fine. Right?
Based on your information, it indicates the issue in the URL configuration. So please go to the Reporting Services Configuration Manager, check the Web Services URL and Report Manager URL. By default, set IP address All assigned, use port 80. However, the
80 port can be shared with other applications, so in this scenario, it might be occupied by another application. From a command prompt, type the following command to return a list of TCP ports that are being used:
netstat –a –n -p tcp
Then used an available port (like 8080 port) for URL of the new Report Server instance. Since the previous instance works fine, there might be some other issue with configuration. For yourself testing, you can trace the hop of http to see some detail
information about the issue. Please refer to the article below:
http://blogs.msdn.com/b/wndp/archive/2007/01/18/event-tracing-in-http-sys-part-1-capturing-a-trace.aspx
Reference:
Configure a URL (SSRS Configuration Manager)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

[Forum FAQ] Configuration Manager Console shows nothing if you change SSRS to using SSL after Reporting Service Point is installed

If the SSRS is changed to SSL mode and http binding is removed after Reporting Service Point is installed. The Configuration Manager Console shows nothing in Reporting Pane. After digging into this problem, the cause is that the SSRS information has not
been updated in Configuration Manager Database. The following steps are taken for finding the root cause.
1. After changing to SSL, the Reporting Service Point log shows the error as shown in Figure 1.
The request failed with HTTP status 404: Not Found.
(!) SRS not detected as running
Failures reported during periodic health check by the SRS Server DB2.SCJIZHO.COM.
Figure 1
From the error, seems the cause was the Reporting Service Point detected a wrong port. We digged around in Registry and found the information is a Registry key named ReportServerUri at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP. After changing the Report
Server address to https. The error is gone as shown in Figure 2. But the issue remains, the Console still shows nothing. It is not a right direction.
Figure 2
2. Open the Console log file, it also shows some valuable information.
instance of __ExtendedStatus
                Operation = "ExecQuery";
                ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'PRI'";
                ProviderName = "WinMgmt";
\r\n
[1, PID:3136][04/24/2014 01:46:00] :Property: 'LastModifiedTime'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[52, PID:3136][05/11/2014 20:14:15] :[ReportProxy] - User-specified default Reporting Point [PRI.scjizho.com] could not be found, [DB2.scjizho.com] is now the default Reporting Point (Figure 3).
Figure 3
It seems the Console wants to access the old http site and it fails to get into the site for sure. Actually, the Site Configuration information is come from Site Control File and as we all know that ConfigMgr 2012 doesn’t store the Site Control file in the
file system. However, it’s stored in the SQL database (as XML file). The XML file is stored in a view named vSMS_SC_SiteControlXML. This view is a read-only view. We cannot edit it directly. The related table stored the SSRS information for this view is SC_SysResUse_Property.
Running the following query will list the SSRS address. We can see the address is still the old one. This is why the Console shows nothing.
SELECT
name,
value2
FROM dbo.SC_SysResUse_Property
where name
='ReportServerUri'
or name=
'ReportManagerUri'
Remarks:
This article is just to let you know why the Console cannot show the Reports after changing to SSL mode. We do not intend to make you change the table in Database, if you want to change it, you will be at your own risk. The real solution to this situation
is to reinstall your Reporting Service Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Ok, but how do you solve this problem? Does uninstalling the RP and adding it back solve this problem?
http://www.enhansoft.com/

How to identify which service pack is installed in BO XI R2

Hi,
I am currently workng in BO XI R2. Can any one please let me know how to find which service pack is installed ?
Below is the version number mentioned in metrics under Central management server in CMC.
Version: 11.5.10.1263
Thanks
Anand

Hi,
take this Version Number and post it into the "Help & Support" are of the SAP Service Marketplace.
If all of your Servers have Version 11.5.10.1263 you are running on SP4.
For more Information check SAP Note - 1318289.
Regards
-Seb.

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

Can FlexNet Service Be Re-installed?

Similar Messages

Maybe you are looking for