Can FMLE use Firewire as a source input?

This is a follow up of my last thread. I am needing to take a composite a/v source and input it into a laptop to bring into FMLE and then stream that out. Can the current version of FMLE take firewire video and audio as a source input?
If so, can anyone recommend a converter? I'm looking at one by Grass Valley (the company that makes EDIUS) that seems like it might work. Here's the link to it.
http://www.grassvalley.com/products/advc55
http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Analog_to_Dig ital.html
Thanks!

Sorry I posted this and then started reading some of the replies. I did see them as I am newbie here.
Looks like the only solution at this time is to export the data to a csv file, open it in numbers and use the numbers file as the source for the mail merge.
Would it be possible to have FileMaker then run an applescript ? or automator script to automatically convert the CSV file to numbers and then rename that Numbers file so that it is consistent and can be reused by the Pages "template" for subsequent documents to be used based on this template?

Similar Messages

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

Using table comparison can we use multiple tables as source?

Using table comparison can we use multiple tables as source?
Thank you very much for the helpful info.

Table Comparison
1) Input Data coming in
2) Comparison table (table to which the data is compared)
3) Output (input rows with respective opcodes based on the comparison result of input dataset with the comparison table)
If your question is whether table comparison can accept union/join of multiple table sources, you can achieve by using merge/query transforms and then feeding to table comparison. Here, you have to be careful about choosing the primary keys inside table comparison

6602 on Traditional DAQ : can't assign gate(0) to source input of counter (0)?

We are replacing a system that used PC-TIO-10 boards with 6602 boards.
In an attempt to minimize system changes, the new system has been wired
identically to the old system, which used the gate lines to count by
opening the gate on the rising edge of the gate line and counted on the
falling edge.
Apparently, we are prevented from using the gate line as source to a
counter. It is confusing enough that the manual says each of the fourty
counter I/O lines can be assigned to any of the counters and any of the
counter functional inputs: I still don't know if this is true or if it
is an improper interpretation of the manual.
Additionally, using DAQ 7.4, we are specifically limted to using source(x) lines as source inputs to the counters.
a) Is it really not possible to connect a gate() line to the source input of the same counter?
b) If so, is it possible to connect the gate(x) input to the source
input of counter(x+1) or (x-1) without affecting counter (x), which is
how it appears in the VI's?
c) If worse comes to worse, we are driving the gate inputs with the
output of an MC14490 hex contact bounce eliminator. Can we tie the gate
and source inputs to a single counter together, and in software set the
source as input and set gate on, and count events that way?
and I guess,
d) we're hopelessly crazy and misinformed, and have to remake the
interface boards and/or completely rewrite the software to use DAQmx?
ray

We are replacing a system that used PC-TIO-10 boards with 6602 boards. In an attempt to minimize system changes, the new system has been wired identically to the old system, which used the gate lines to count by opening the gate on the rising edge of the gate line and counted on the falling edge.
I don't understand the function you were accomplishing. What do mean by "opening the gate" on the rising edge?
It is confusing enough that the manual says each of the fourty counter I/O lines can be assigned to any of the counters and any of the counter functional inputs: I still don't know if this is true or if it is an improper interpretation of the manual.
No, the assignments are not that flexible. However, you certainly can assign any counter's default source pin to be used as a source by any other counter's task (or by several tasks at once). There are a few other special-case assignments, but for the most part they are flexible within their own category. Any source pin can be the source for any counter, any gate pin can be the gate for any counter, etc.
a) Is it really not possible to connect a gate() line to the source input of the same counter?
b) If so, is it possible to connect the gate(x) input to the source input of counter(x+1) or (x-1) without affecting counter (x), which is how it appears in the VI's?
c) If worse comes to worse, we are driving the gate inputs with the output of an MC14490 hex contact bounce eliminator. Can we tie the gate and source inputs to a single counter together, and in software set the source as input and set gate on, and count events that way?
a) I'm not at hw now and can't recall for sure about using a counter's own gate signal as a source. See b).
b) I'm pretty sure a counter can use as its source the gate signal from its paired counter (x+1 or x-1).
c) Um, it isn't clear to me why you need both source and gate connected this way if you are just counting events.
d) we're hopelessly crazy and misinformed, and have to remake the interface boards and/or completely rewrite the software to use DAQmx?
I don't think so. If the PC-TIO-10 was just performing event (edge) counting, then you shouldn't need to worry about the gate inputs on the 6602. The new counters can simply count source edges without regard to a gate input.
Can you describe how the source and gate inputs were used to accomplish the measurement you needed on the PC-TIO-10? It's been a long time since I used one and I only ever used it for period measurement...
-Kevin P.

Can I use firewire to transfer everything from my Macbook Pro (Intel Core 2 Duo 2.25 GHz) to the new iMac (2.5GHz Quad-Core Intel Core i5)?

I have a MacBook Pro to use at work. It has everything (all genuine softwares, server connection etc). The company is using a contract IT company so connecting to the server and setting email is real issue with me as this IT people can't configure Mac. Last time it took them 1 week to set up everything for me ( me one the phone with them as they aren't coming to our office - they only use QuickViewer to get access to my laptop).
Now the company is buying me an iMac so that I can use the laptop at home. Can I use firewire to transfer everything to the new iMac so that I don't waste my time installing softwares & calling this IT people to set up my email and connection to the server again? If it works do I have to enter serial numbers in again for all the softwares or I have to buy new softwares (I know with Adobe CS - I can only install in one computer)?
Thanks in advance.

If you want to use the adobe suite on the imac you will have to deactivate it on the MBP or it will show up as being used. That is if you can only install it on one computer. Some licenses you can install it on 2 computers but it has to say that on the cd key tag.
Sorry to hear about your bad experience with the contractors. It is not that hard to get stuff like that up and running on the mac.

Can I use/convert Flash *.fla sources to Flex sources?

I have an older project with a *.fla source file.
Can I use this old Flash source in Flex SDK resp. Flex
builder too?
Do I have to convert this *.fla source in advance?
Peter

I did some further Investigation on my own. Actually YES YOU CAN EXPORT VIDEO DIRECTLY from flash to AVI - MOV
just select export/export movie/avi
From there you can select the output resolution and have full HD 1920x1080.

Can I use FileMaker as a source for mail merge in Pages

Can I use FileMaker as a source for mail merge in Pages

Sorry I posted this and then started reading some of the replies. I did see them as I am newbie here.
Looks like the only solution at this time is to export the data to a csv file, open it in numbers and use the numbers file as the source for the mail merge.
Would it be possible to have FileMaker then run an applescript ? or automator script to automatically convert the CSV file to numbers and then rename that Numbers file so that it is consistent and can be reused by the Pages "template" for subsequent documents to be used based on this template?

Can you use Apple TV and source films/music from two different Macs in the home?

Can you use Apple TV and source films/music from two different Macs in the home?

not at the same time but yes.
set up home sharing on both computers and Apple TV using the same Apple ID.
Setting up Home Sharing on your computer
Setting up Home Sharing for Apple TV (2nd generation)

Can I use my Korg D3200 as input mixer?

Can I use my Korg D3200 as input mixer for recording into Garageband?

Actually, there is a way to limit the amount of space Time Machine uses for backup so that it won't eat up all your disk space...for example, I have mine set to only use 65GB, and then it starts to overwrite older backups...Google it for more info. To begin with, I deleted my Sparse Disk Image Bundle from Time Capsule, and used Disk Utility to create a Sparse Disk Image Bundle (turn off backups first!!!) with a capacity of 65GB in HFS Journaled, Case Sensitive...The Image must be named as follows "Full Computer Name_Ethernet MAC Address" (The ethernet MAC address is used even if you plan to solely use wifi for backups). for example, my Sparse Disk Image Bundle name is "Ahmad Atiya's MacBook Pro_00254b9d8f72.sparsebundle" Move this image to your time capsule's main directory (if you didn't create it there to begin with). Go to your Time Machine preferences, turn it on, and set it to use your Time Capsule. It should start using the image you created. If you click "get info" on the disk image, it'll show a capacity of whatever you created.

How can I use my iPod as source for reinstalled iTunes?

Hello @ all.
Unfortunately I had to completely reinstall my system (WinXP Pro PC) and lost my media library!
How can I use my iPod as a source to copy all my songs and settings (incl. covers, aso) to iTunes?
iPod: 30GBs Video iPod
iTunes Version: 7.0.2.16
can u guys help me with that?
Thanks very much!

The transfer of purchased content to authorised computers has been introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPodCopy Mac and Windows Versions
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
CopyPod Windows Only
If your iPod is set to update automatically take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for a reasonable outlay.

Can FMLE use 6 core fully?

I am recently want to upgrade my computer for higher quality streaming.
I am looking at AMD 1095(6core) and 970(4core).Since stream is about video encording, 6core should have better result.
But i am not sure if FMLE can fully use the advantage of 6 core processor.
Is 1095 better than 970 in this suition? or there are some other cup you will recommend. (perfer AMD but i am open mind)

FMLE can use multiple cores. it is certified for 8 core and 16 cores machines as well. for single stream, FMLE may not use all the cores fully but for multiple streams higher the number of cores better the performance is.

Can I use Bulk Collect results as input parameter for another cursor

MUSIC            ==> remote MUSIC_DB database, MUSIC table has 60 million rows
PRICE_DATA ==> remote PRICING_DB database, PRICE_DATE table has 1 billion rows
These two table once existed in same database, but size of database exceeded available hardware size and hardware budget, so the PRICE_DATA table was moved to another Oracle database. I need to create a single report that combines data from both of these tables, and a distributed join with DRIVING_SITE hint will not work because the size of both table is too large to push to one DRIVING_SITE location, so I wrote this PLSQL block to process in small blocks.
QUESTION: how can use bulk collect from one cursor and pass that bulk collected information as input to second cursor without specifically listing each cell of the PLSQL bulk collection? See sample pseudo-code below, I am trying to determine more efficient way to code than hard-coding 100 parameter names into 2nd cursor.
NOTE: below is truly pseudo-code, I had to change the names of everything to adhere to NDA, but below works and is fast enough for my purposes, but if I want to change from 100 input parameters to 200, I have to add more hard-coded values. There has got to be a better way.
DECLARE
     -- define cursor that retrieves distinct SONG_IDs from MUSIC table in remote music database
     CURSOR C_CURRENT_MUSIC
     IS
    select distinct SONG_ID
    from MUSIC@MUSIC_DB
    where PRODUCTION_RELEASE=1
     /* define a parameterized cursor that accepts 100 SONG_IDs and retrieves
          required pricing information
     CURSOR C_get_music_price_data
               P_SONG_ID_001 NUMBER, P_SONG_ID_002 NUMBER, P_SONG_ID_003 NUMBER, P_SONG_ID_004 NUMBER, P_SONG_ID_005 NUMBER, P_SONG_ID_006 NUMBER, P_SONG_ID_007 NUMBER, P_SONG_ID_008 NUMBER, P_SONG_ID_009 NUMBER, P_SONG_ID_010 NUMBER,
               P_SONG_ID_011 NUMBER, P_SONG_ID_012 NUMBER, P_SONG_ID_013 NUMBER, P_SONG_ID_014 NUMBER, P_SONG_ID_015 NUMBER, P_SONG_ID_016 NUMBER, P_SONG_ID_017 NUMBER, P_SONG_ID_018 NUMBER, P_SONG_ID_019 NUMBER, P_SONG_ID_020 NUMBER,
               P_SONG_ID_021 NUMBER, P_SONG_ID_022 NUMBER, P_SONG_ID_023 NUMBER, P_SONG_ID_024 NUMBER, P_SONG_ID_025 NUMBER, P_SONG_ID_026 NUMBER, P_SONG_ID_027 NUMBER, P_SONG_ID_028 NUMBER, P_SONG_ID_029 NUMBER, P_SONG_ID_030 NUMBER,
               P_SONG_ID_031 NUMBER, P_SONG_ID_032 NUMBER, P_SONG_ID_033 NUMBER, P_SONG_ID_034 NUMBER, P_SONG_ID_035 NUMBER, P_SONG_ID_036 NUMBER, P_SONG_ID_037 NUMBER, P_SONG_ID_038 NUMBER, P_SONG_ID_039 NUMBER, P_SONG_ID_040 NUMBER,
               P_SONG_ID_041 NUMBER, P_SONG_ID_042 NUMBER, P_SONG_ID_043 NUMBER, P_SONG_ID_044 NUMBER, P_SONG_ID_045 NUMBER, P_SONG_ID_046 NUMBER, P_SONG_ID_047 NUMBER, P_SONG_ID_048 NUMBER, P_SONG_ID_049 NUMBER, P_SONG_ID_050 NUMBER,
               P_SONG_ID_051 NUMBER, P_SONG_ID_052 NUMBER, P_SONG_ID_053 NUMBER, P_SONG_ID_054 NUMBER, P_SONG_ID_055 NUMBER, P_SONG_ID_056 NUMBER, P_SONG_ID_057 NUMBER, P_SONG_ID_058 NUMBER, P_SONG_ID_059 NUMBER, P_SONG_ID_060 NUMBER,
               P_SONG_ID_061 NUMBER, P_SONG_ID_062 NUMBER, P_SONG_ID_063 NUMBER, P_SONG_ID_064 NUMBER, P_SONG_ID_065 NUMBER, P_SONG_ID_066 NUMBER, P_SONG_ID_067 NUMBER, P_SONG_ID_068 NUMBER, P_SONG_ID_069 NUMBER, P_SONG_ID_070 NUMBER,
               P_SONG_ID_071 NUMBER, P_SONG_ID_072 NUMBER, P_SONG_ID_073 NUMBER, P_SONG_ID_074 NUMBER, P_SONG_ID_075 NUMBER, P_SONG_ID_076 NUMBER, P_SONG_ID_077 NUMBER, P_SONG_ID_078 NUMBER, P_SONG_ID_079 NUMBER, P_SONG_ID_080 NUMBER,
               P_SONG_ID_081 NUMBER, P_SONG_ID_082 NUMBER, P_SONG_ID_083 NUMBER, P_SONG_ID_084 NUMBER, P_SONG_ID_085 NUMBER, P_SONG_ID_086 NUMBER, P_SONG_ID_087 NUMBER, P_SONG_ID_088 NUMBER, P_SONG_ID_089 NUMBER, P_SONG_ID_090 NUMBER,
               P_SONG_ID_091 NUMBER, P_SONG_ID_092 NUMBER, P_SONG_ID_093 NUMBER, P_SONG_ID_094 NUMBER, P_SONG_ID_095 NUMBER, P_SONG_ID_096 NUMBER, P_SONG_ID_097 NUMBER, P_SONG_ID_098 NUMBER, P_SONG_ID_099 NUMBER, P_SONG_ID_100 NUMBER
     IS
     select
     from PRICE_DATA@PRICING_DB
     where COUNTRY = 'USA'
     and START_DATE <= sysdate
     and END_DATE > sysdate
     and vpc.SONG_ID IN
               P_SONG_ID_001 ,P_SONG_ID_002 ,P_SONG_ID_003 ,P_SONG_ID_004 ,P_SONG_ID_005 ,P_SONG_ID_006 ,P_SONG_ID_007 ,P_SONG_ID_008 ,P_SONG_ID_009 ,P_SONG_ID_010,
               P_SONG_ID_011 ,P_SONG_ID_012 ,P_SONG_ID_013 ,P_SONG_ID_014 ,P_SONG_ID_015 ,P_SONG_ID_016 ,P_SONG_ID_017 ,P_SONG_ID_018 ,P_SONG_ID_019 ,P_SONG_ID_020,
               P_SONG_ID_021 ,P_SONG_ID_022 ,P_SONG_ID_023 ,P_SONG_ID_024 ,P_SONG_ID_025 ,P_SONG_ID_026 ,P_SONG_ID_027 ,P_SONG_ID_028 ,P_SONG_ID_029 ,P_SONG_ID_030,
               P_SONG_ID_031 ,P_SONG_ID_032 ,P_SONG_ID_033 ,P_SONG_ID_034 ,P_SONG_ID_035 ,P_SONG_ID_036 ,P_SONG_ID_037 ,P_SONG_ID_038 ,P_SONG_ID_039 ,P_SONG_ID_040,
               P_SONG_ID_041 ,P_SONG_ID_042 ,P_SONG_ID_043 ,P_SONG_ID_044 ,P_SONG_ID_045 ,P_SONG_ID_046 ,P_SONG_ID_047 ,P_SONG_ID_048 ,P_SONG_ID_049 ,P_SONG_ID_050,
               P_SONG_ID_051 ,P_SONG_ID_052 ,P_SONG_ID_053 ,P_SONG_ID_054 ,P_SONG_ID_055 ,P_SONG_ID_056 ,P_SONG_ID_057 ,P_SONG_ID_058 ,P_SONG_ID_059 ,P_SONG_ID_060,
               P_SONG_ID_061 ,P_SONG_ID_062 ,P_SONG_ID_063 ,P_SONG_ID_064 ,P_SONG_ID_065 ,P_SONG_ID_066 ,P_SONG_ID_067 ,P_SONG_ID_068 ,P_SONG_ID_069 ,P_SONG_ID_070,
               P_SONG_ID_071 ,P_SONG_ID_072 ,P_SONG_ID_073 ,P_SONG_ID_074 ,P_SONG_ID_075 ,P_SONG_ID_076 ,P_SONG_ID_077 ,P_SONG_ID_078 ,P_SONG_ID_079 ,P_SONG_ID_080,
               P_SONG_ID_081 ,P_SONG_ID_082 ,P_SONG_ID_083 ,P_SONG_ID_084 ,P_SONG_ID_085 ,P_SONG_ID_086 ,P_SONG_ID_087 ,P_SONG_ID_088 ,P_SONG_ID_089 ,P_SONG_ID_090,
               P_SONG_ID_091 ,P_SONG_ID_092 ,P_SONG_ID_093 ,P_SONG_ID_094 ,P_SONG_ID_095 ,P_SONG_ID_096 ,P_SONG_ID_097 ,P_SONG_ID_098 ,P_SONG_ID_099 ,P_SONG_ID_100
     group by
           vpc.SONG_ID
          ,vpc.STOREFRONT_ID
     TYPE SONG_ID_TYPE IS TABLE OF MUSIC@MUSIC_DB%TYPE INDEX BY BINARY_INTEGER;
     V_SONG_ID_ARRAY                         SONG_ID_TYPE                     ;
     v_commit_counter           NUMBER := 0;
BEGIN
     /* open cursor you intent to bulk collect from */
     OPEN C_CURRENT_MUSIC;
     LOOP
          /* in batches of 100, bulk collect ADAM_ID mapped TMS_IDENTIFIER into PLSQL table or records */
          FETCH C_CURRENT_MUSIC BULK COLLECT INTO V_SONG_ID_ARRAY LIMIT 100;
               EXIT WHEN V_SONG_ID_ARRAY.COUNT = 0;
               /* to avoid NO DATA FOUND error when pass 100 parameters to OPEN cursor, if the arrary
                  is not fully populated to 100, pad the array with nulls to fill up to 100 cells. */
               IF (V_SONG_ID_ARRAY.COUNT >=1 and V_SONG_ID_ARRAY.COUNT <> 100) THEN
                    FOR j IN V_SONG_ID_ARRAY.COUNT+1..100 LOOP
                         V_SONG_ID_ARRAY(j) := null;
                    END LOOP;
               END IF;
          /* pass a batch of 100 to cursor that get price information per SONG_ID and STOREFRONT_ID */
          FOR j IN C_get_music_price_data
                    V_SONG_ID_ARRAY(1) ,V_SONG_ID_ARRAY(2) ,V_SONG_ID_ARRAY(3) ,V_SONG_ID_ARRAY(4) ,V_SONG_ID_ARRAY(5) ,V_SONG_ID_ARRAY(6) ,V_SONG_ID_ARRAY(7) ,V_SONG_ID_ARRAY(8) ,V_SONG_ID_ARRAY(9) ,V_SONG_ID_ARRAY(10) ,
                    V_SONG_ID_ARRAY(11) ,V_SONG_ID_ARRAY(12) ,V_SONG_ID_ARRAY(13) ,V_SONG_ID_ARRAY(14) ,V_SONG_ID_ARRAY(15) ,V_SONG_ID_ARRAY(16) ,V_SONG_ID_ARRAY(17) ,V_SONG_ID_ARRAY(18) ,V_SONG_ID_ARRAY(19) ,V_SONG_ID_ARRAY(20) ,
                    V_SONG_ID_ARRAY(21) ,V_SONG_ID_ARRAY(22) ,V_SONG_ID_ARRAY(23) ,V_SONG_ID_ARRAY(24) ,V_SONG_ID_ARRAY(25) ,V_SONG_ID_ARRAY(26) ,V_SONG_ID_ARRAY(27) ,V_SONG_ID_ARRAY(28) ,V_SONG_ID_ARRAY(29) ,V_SONG_ID_ARRAY(30) ,
                    V_SONG_ID_ARRAY(31) ,V_SONG_ID_ARRAY(32) ,V_SONG_ID_ARRAY(33) ,V_SONG_ID_ARRAY(34) ,V_SONG_ID_ARRAY(35) ,V_SONG_ID_ARRAY(36) ,V_SONG_ID_ARRAY(37) ,V_SONG_ID_ARRAY(38) ,V_SONG_ID_ARRAY(39) ,V_SONG_ID_ARRAY(40) ,
                    V_SONG_ID_ARRAY(41) ,V_SONG_ID_ARRAY(42) ,V_SONG_ID_ARRAY(43) ,V_SONG_ID_ARRAY(44) ,V_SONG_ID_ARRAY(45) ,V_SONG_ID_ARRAY(46) ,V_SONG_ID_ARRAY(47) ,V_SONG_ID_ARRAY(48) ,V_SONG_ID_ARRAY(49) ,V_SONG_ID_ARRAY(50) ,
                    V_SONG_ID_ARRAY(51) ,V_SONG_ID_ARRAY(52) ,V_SONG_ID_ARRAY(53) ,V_SONG_ID_ARRAY(54) ,V_SONG_ID_ARRAY(55) ,V_SONG_ID_ARRAY(56) ,V_SONG_ID_ARRAY(57) ,V_SONG_ID_ARRAY(58) ,V_SONG_ID_ARRAY(59) ,V_SONG_ID_ARRAY(60) ,
                    V_SONG_ID_ARRAY(61) ,V_SONG_ID_ARRAY(62) ,V_SONG_ID_ARRAY(63) ,V_SONG_ID_ARRAY(64) ,V_SONG_ID_ARRAY(65) ,V_SONG_ID_ARRAY(66) ,V_SONG_ID_ARRAY(67) ,V_SONG_ID_ARRAY(68) ,V_SONG_ID_ARRAY(69) ,V_SONG_ID_ARRAY(70) ,
                    V_SONG_ID_ARRAY(71) ,V_SONG_ID_ARRAY(72) ,V_SONG_ID_ARRAY(73) ,V_SONG_ID_ARRAY(74) ,V_SONG_ID_ARRAY(75) ,V_SONG_ID_ARRAY(76) ,V_SONG_ID_ARRAY(77) ,V_SONG_ID_ARRAY(78) ,V_SONG_ID_ARRAY(79) ,V_SONG_ID_ARRAY(80) ,
                    V_SONG_ID_ARRAY(81) ,V_SONG_ID_ARRAY(82) ,V_SONG_ID_ARRAY(83) ,V_SONG_ID_ARRAY(84) ,V_SONG_ID_ARRAY(85) ,V_SONG_ID_ARRAY(86) ,V_SONG_ID_ARRAY(87) ,V_SONG_ID_ARRAY(88) ,V_SONG_ID_ARRAY(89) ,V_SONG_ID_ARRAY(90) ,
                    V_SONG_ID_ARRAY(91) ,V_SONG_ID_ARRAY(92) ,V_SONG_ID_ARRAY(93) ,V_SONG_ID_ARRAY(94) ,V_SONG_ID_ARRAY(95) ,V_SONG_ID_ARRAY(96) ,V_SONG_ID_ARRAY(97) ,V_SONG_ID_ARRAY(98) ,V_SONG_ID_ARRAY(99) ,V_SONG_ID_ARRAY(100)
          LOOP
               /* do stuff with data from Song and Pricing Database coming from the two
                    separate cursors, then continue processing more rows...
          END LOOP;
          /* commit after each batch of 100 SONG_IDs is processed */
          COMMIT;
          EXIT WHEN C_CURRENT_MUSIC%NOTFOUND; -- exit when there are no more rows to fetch from cursor
     END LOOP; -- bulk fetching loop
     CLOSE C_CURRENT_MUSIC; -- close cursor that was used in bulk collection
     /* commit rows */
     COMMIT; -- commit any remaining uncommitted data.
END;

I've got a problem when using passing VARRAY of numbers as parameter to remote cursor: it takes a super long time to run, sometimes doesn't finish even after an hour as passed.
Continuing with my example in original entry, I replaced the bulk collect into PLSQL table collection with a VARRAY and i bulk collect into the VARRAY, this is fast and I know it works because I can DBMS_OUTPUT.PUT_LINE cells of VARRAY so I know it is getting populated correctly. However, when I pass the VARRAY containing 100 cells populated with SONG_IDs as parameter to cursor, execution time is over an hour and when I am expecting a few seconds.
Below code example strips the problem down to it's raw details, I skip the bulk collect and just manually populate a VARRAY with 100 SONG_ID values, then try to pass to as parameter to a cursor, but the execution time of cursor is unexpectedly long, over 30 minutes, sometime longer, when I am expecting seconds.
IMPORTANT: If I take the same 100 SONG_IDs and place them directly in the cursor query's where IN clause, the SQL runs in under 5 seconds and returns result. Also, if I pass the 100 SONG_IDs as individual cells of a PLSQL table collection, then it also runs fast.
I thought that since the VARRAY is used via select subquery that is it queried locally, but the cursor is remote, and that I had a distribute problem on my hands, so I put in the DRIVING_SITE hint to attempt to force the result of query against VARRAY to go to remote server and rest of query will run there before returning result, but that didn't work either, still got slow response.
Is something wrong with my code, or I am running into a Oracle problem that may require support to resolve?
DECLARE
     /* define a parameterized cursor that accepts XXX number of in SONG_IDs and
      retrieves required pricing information
     CURSOR C_get_music_price_data
p_array_song_ids SYS.ODCInumberList
     IS
     select /*+DRIVING_SITE(pd) */
count(distinct s.EVE_ID)
     from PRICE_DATA@PRICING_DB pd
     where pd.COUNTRY = 'USA'
     and pd.START_DATE <= sysdate
     and pd.END_DATE > sysdate
     and pd.SONG_ID IN
          select column_value from table(p_array_song_ids)
     group by
           pd.SONG_ID
          ,pd.STOREFRONT_ID
V_ARRAY_SONG_IDS SYS.ODCInumberList := SYS.ODCInumberList();
BEGIN
V_ARRAY_SONG_IDS.EXTEND(100);
V_ARRAY_SONG_IDS( 1 ) := 31135 ;
V_ARRAY_SONG_IDS( 2 ) := 31140   ;
V_ARRAY_SONG_IDS( 3 ) := 31142   ;
V_ARRAY_SONG_IDS( 4 ) := 31144   ;
V_ARRAY_SONG_IDS( 5 ) := 31146   ;
V_ARRAY_SONG_IDS( 6 ) := 31148   ;
V_ARRAY_SONG_IDS( 7 ) := 31150   ;
V_ARRAY_SONG_IDS( 8 ) := 31152   ;
V_ARRAY_SONG_IDS( 9 ) := 31154   ;
V_ARRAY_SONG_IDS( 10 ) := 31156   ;
V_ARRAY_SONG_IDS( 11 ) := 31158   ;
V_ARRAY_SONG_IDS( 12 ) := 31160   ;
V_ARRAY_SONG_IDS( 13 ) := 33598   ;
V_ARRAY_SONG_IDS( 14 ) := 33603   ;
V_ARRAY_SONG_IDS( 15 ) := 33605   ;
V_ARRAY_SONG_IDS( 16 ) := 33607   ;
V_ARRAY_SONG_IDS( 17 ) := 33609   ;
V_ARRAY_SONG_IDS( 18 ) := 33611   ;
V_ARRAY_SONG_IDS( 19 ) := 33613   ;
V_ARRAY_SONG_IDS( 20 ) := 33615   ;
V_ARRAY_SONG_IDS( 21 ) := 33617   ;
V_ARRAY_SONG_IDS( 22 ) := 33630   ;
V_ARRAY_SONG_IDS( 23 ) := 33632   ;
V_ARRAY_SONG_IDS( 24 ) := 33636   ;
V_ARRAY_SONG_IDS( 25 ) := 33638   ;
V_ARRAY_SONG_IDS( 26 ) := 33640   ;
V_ARRAY_SONG_IDS( 27 ) := 33642   ;
V_ARRAY_SONG_IDS( 28 ) := 33644   ;
V_ARRAY_SONG_IDS( 29 ) := 33646   ;
V_ARRAY_SONG_IDS( 30 ) := 33648   ;
V_ARRAY_SONG_IDS( 31 ) := 33662   ;
V_ARRAY_SONG_IDS( 32 ) := 33667   ;
V_ARRAY_SONG_IDS( 33 ) := 33669   ;
V_ARRAY_SONG_IDS( 34 ) := 33671   ;
V_ARRAY_SONG_IDS( 35 ) := 33673   ;
V_ARRAY_SONG_IDS( 36 ) := 33675   ;
V_ARRAY_SONG_IDS( 37 ) := 33677   ;
V_ARRAY_SONG_IDS( 38 ) := 33679   ;
V_ARRAY_SONG_IDS( 39 ) := 33681   ;
V_ARRAY_SONG_IDS( 40 ) := 33683   ;
V_ARRAY_SONG_IDS( 41 ) := 33685   ;
V_ARRAY_SONG_IDS( 42 ) := 33700   ;
V_ARRAY_SONG_IDS( 43 ) := 33702   ;
V_ARRAY_SONG_IDS( 44 ) := 33704   ;
V_ARRAY_SONG_IDS( 45 ) := 33706   ;
V_ARRAY_SONG_IDS( 46 ) := 33708   ;
V_ARRAY_SONG_IDS( 47 ) := 33710   ;
V_ARRAY_SONG_IDS( 48 ) := 33712   ;
V_ARRAY_SONG_IDS( 49 ) := 33723   ;
V_ARRAY_SONG_IDS( 50 ) := 33725   ;
V_ARRAY_SONG_IDS( 51 ) := 33727   ;
V_ARRAY_SONG_IDS( 52 ) := 33729   ;
V_ARRAY_SONG_IDS( 53 ) := 33731   ;
V_ARRAY_SONG_IDS( 54 ) := 33733   ;
V_ARRAY_SONG_IDS( 55 ) := 33735   ;
V_ARRAY_SONG_IDS( 56 ) := 33737   ;
V_ARRAY_SONG_IDS( 57 ) := 33749   ;
V_ARRAY_SONG_IDS( 58 ) := 33751   ;
V_ARRAY_SONG_IDS( 59 ) := 33753   ;
V_ARRAY_SONG_IDS( 60 ) := 33755   ;
V_ARRAY_SONG_IDS( 61 ) := 33757   ;
V_ARRAY_SONG_IDS( 62 ) := 33759   ;
V_ARRAY_SONG_IDS( 63 ) := 33761   ;
V_ARRAY_SONG_IDS( 64 ) := 33763   ;
V_ARRAY_SONG_IDS( 65 ) := 33775   ;
V_ARRAY_SONG_IDS( 66 ) := 33777   ;
V_ARRAY_SONG_IDS( 67 ) := 33779   ;
V_ARRAY_SONG_IDS( 68 ) := 33781   ;
V_ARRAY_SONG_IDS( 69 ) := 33783   ;
V_ARRAY_SONG_IDS( 70 ) := 33785   ;
V_ARRAY_SONG_IDS( 71 ) := 33787   ;
V_ARRAY_SONG_IDS( 72 ) := 33789   ;
V_ARRAY_SONG_IDS( 73 ) := 33791   ;
V_ARRAY_SONG_IDS( 74 ) := 33793   ;
V_ARRAY_SONG_IDS( 75 ) := 33807   ;
V_ARRAY_SONG_IDS( 76 ) := 33809   ;
V_ARRAY_SONG_IDS( 77 ) := 33811   ;
V_ARRAY_SONG_IDS( 78 ) := 33813   ;
V_ARRAY_SONG_IDS( 79 ) := 33815   ;
V_ARRAY_SONG_IDS( 80 ) := 33817   ;
V_ARRAY_SONG_IDS( 81 ) := 33819   ;
V_ARRAY_SONG_IDS( 82 ) := 33821   ;
V_ARRAY_SONG_IDS( 83 ) := 33823   ;
V_ARRAY_SONG_IDS( 84 ) := 33825   ;
V_ARRAY_SONG_IDS( 85 ) := 33839   ;
V_ARRAY_SONG_IDS( 86 ) := 33844   ;
V_ARRAY_SONG_IDS( 87 ) := 33846   ;
V_ARRAY_SONG_IDS( 88 ) := 33848   ;
V_ARRAY_SONG_IDS( 89 ) := 33850   ;
V_ARRAY_SONG_IDS( 90 ) := 33852   ;
V_ARRAY_SONG_IDS( 91 ) := 33854   ;
V_ARRAY_SONG_IDS( 92 ) := 33856   ;
V_ARRAY_SONG_IDS( 93 ) := 33858   ;
V_ARRAY_SONG_IDS( 94 ) := 33860   ;
V_ARRAY_SONG_IDS( 95 ) := 33874   ;
V_ARRAY_SONG_IDS( 96 ) := 33879   ;
V_ARRAY_SONG_IDS( 97 ) := 33881   ;
V_ARRAY_SONG_IDS( 98 ) := 33883   ;
V_ARRAY_SONG_IDS( 99 ) := 33885   ;
V_ARRAY_SONG_IDS(100 ) := 33889 ;
    /* do stuff with data from Song and Pricing Database coming from the two
separate cursors, then continue processing more rows...
FOR i IN C_get_music_price_data( v_array_song_ids ) LOOP
. (this is the loop where I pass in v_array_song_ids
. populated with only 100 cells and it runs forever)
END LOOP;
END;

Can I use firewire to reinstall updated OS?

Hi
I've reformatted my G4 hard drive and have only been able to reinstall OS 10.1.5 since I don't have other disks with me.
However I have an iBook running 10.3.9 (which is what the G4 used to run) and I have a firewire cable -
can I install system software to get my G4 back up to 10.3.9 by hooking the two up via firewire?
thanks again,
jj

Hi Again juliejane!
It isn't necessary to post multiple Topics, regarding the same issue.
It can be confusing, as doing so may generate duplicate responses, from different members trying to assist you.
Refer to your Other Topics, linked to below, for additional suggestions.
can't restart after clean reinstall
Clean reinstall from 10.1.3 to 10.3.9
Thank You,
ali b

How can I use the same data source twice?

in our system there is already a complete transfer of calculations to BI (0CO_PC_PCP_01).
However I want to create a new data flow from ERP starting from the same data source.
Is this possible?
Thanks for help!!

Hi!
welcome to SDN forums.
anydata source can be mapped only to a single infosource. but it will not ristrict you to have different datatargets from a single infosource. so you have to use filters in infopackages to select the data target and filter the data for this data sources. Only thing you have to do with old dataflow is just ristrict the data relavent for the 1st Datatarget in old Infopackage and re.initialize.
with regards
ashwin

Can I use "apple script" to auto input xml file to final cut pro and auto export mp4 file?

Now, I'v a lot of final cut pro x 's xml, I want to use ""apple script" or other method to auto input xml and output mp4 in final cut pro x . How can I finish it?

Where did the XML come from? What did it consist of?

Can FMLE use Firewire as a source input?

Similar Messages

Maybe you are looking for