Can FMS 4.5 be run on the same server as Cpanel?

I am looking at using the FMS 4.5 to take ingress of RTMP live streams and publish HTTP Live streams to a content delivery network. I see that FMS 4.5 has an apache build to do the http part, We have two dedicated servers running Cpanel/Webhost Manager that are litely loaded.
1) Could we accomplish this using the apache that is part of Cpanel?
2) Or, does the FMS need its own apache using port 80?
Thanks

hi,
You may very well customise your external apache to work along with FMS to use the HTTP live streaming features.. However there are some Apache's version specific things that you would need to take care of..
I have a personal blog post for "how to configure external apache for HLS".. you may check it here:
http://knowfms.wordpress.com/2011/09/29/how-to-set-up-your-external-apache-for-hds-and-hls /
Hope it helps..

Similar Messages

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

I am using a Mac OS X 10.7 and i have trouble using idvd. If I buy a previous version of ilife, will I be able to use idvd without affecting the settings of Mac OS X 10.7? Can both versions of ilife run on the same mac?

I am using a Mac OS X 10.7 and i have trouble using idvd. If I buy a previous version of ilife, will I be able to use idvd without affecting the settings of Mac OS X 10.7? Can both versions of ilife run on the same mac?

You don't need to buy an earlier version of iDVD to have it run with Lion. iDVD 7 has been with us since iLife 08. Tell us in detail what you're experiencing.
OT

Activating MS Office 2013 ProPlus via KMS running on the same server

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

Securing applications communications running in the same server

Hi everybody,
I want to share critical information between two applications (medical information about patients) using JMS queues, moreover due to this criticity i was planning to secure this communication using SSL. The problem is that one of the client applications, because of his architecture, have problems when accessing the JMS queues.
But I have to say that both applications will run in the same server (physical machine), knowing that, what kind of security problems could we encounter if, finnally we don't cypher the communication?
I guess that the danger is lower than if the two applications would run in different machines, wouldn't it?
Thanks!!!

hi,
add crossContext="true" in server.xml under tomcatx.x\conf\ in your <Context tag

Can Xgrid controller and agent run on the same controller?

I am trying to setup an Xgrid on 2 Mac OS X Leopard computers. My intention was setting up one computer as a controller/agent and other computer as an agent so that I can have a grid with 2 agents running on different computers. I setup my grid with xgridctl and using Xgrid Admin, I am able to view the grid on a GUI program. In Xgrid Admin, I also see 2 computers (One is local, other one is remote computer) listed with their IP addresses. Only the remote computer's status is "Available". Local computer's status is "Unavailable".
I was about to conclude that you can not have controller and agent on the same computer but I decided to shoot an email to apple mailing list and expect some clarification.
Thanks in advance for the support,
Umut Tezduyar

You might get a better response to this in either the [OS X Server forum|http://discussions.apple.com/category.jspa?categoryID=96] or even the [Xgrid area!|http://discussions.apple.com/forum.jspa?forumID=722]

XI and R/3 Running on the same Server.

Hello Friends!
One year ago I've installed XI on a machine that already had a R/3 instance. Although there were different instances, one for SAP R/3 and one instance for the ABAP part of XI, I couldn't get to connect XI to the R/3, appartently XI searched for the instance through the IP address, ignoring the instance ID parameter.
Now I have again the same challenge, I have only one machine to run R/3 and XI.
Does anyone know if it is possible to do?

Hi Tadeo,
from ERP 2004 you can install XI on the same server.
Regards,
Udo

Can 2 versions of itunes run on the same pc?

I have an ipod classic and an iphone 4. My iphone has been synced with itunes 11. When I tried to sync my ipod, itunes could not recognize it in ver.11 (it never shows up at all when I plug it in to the usb cable.) I uninstalled itunes on my PC and reinstalled ver 10 so that I could put new music on my ipod classic. Now itunes 10 won't allow me to sync my ipone, since I synced it on version 11.
Can I run separate itunes versions under separate users on the same HD? Or is that not possible? Any other solutions?
Thanks

You don't need to buy an earlier version of iDVD to have it run with Lion. iDVD 7 has been with us since iLife 08. Tell us in detail what you're experiencing.
OT

Can DW CS6 and CC run on the same computer (was: Dreamweaver ?)

I teach using CS 6 in my classroom, if my students download Dreamweaver CC can they work in both versions or will this cause an issue.

The perpetual license version of DWCS6 is now 5.5 versions removed from "current" and in every new version there have been significant menu and functionality changes. If you are trying to "teach Dreamweaver" they will have a fairly difficult time following examples from DWCS6 in the latest version of DWCC 2014.1x (I don't have the latest and can't remember the exact build number)
That being said, Creative Cloud subscriptions allow users to install all the way back to DWCS6 Cloud. Currently, you can have DWCS6 Cloud, DW CC and DWCC 2014.1x all installed at the same time. So, if your students were to become Cloud subscribers, or if the school is installing software for them to use, the old version can be added under the standard subscription using the Creative Cloud Desktop app.

Can a power mac g5 run on the same ram as a mac pro?

I have a Power Mac G5 and want to buy some new rame and i was wondering if it ran off the same ram from a Mac Pro, Specifically 1 RX8-PC3-8500E-7-10-DO ram type.

OWC is a great source for Mac RAM:
http://eshop.macsales.com/shop/memory/PowerMac-G5-Memory

E72 - can't set up second Email on the same server

Hi,
due to some problems with my E72 I decided to do a hard-reset back to factory settings. Now I am in the process of setting up everything again, but I encountered a problem with my Email. I got two Email accounts on my own (rented) server and I used to access them without any problems with my phone. Setup for the first account went without any problems. However, the second Email account does not connect and it seems like the application crashes or at least becomes unresponsive. Both accounts are pretty much identical, the only difference is the username, but the out and ingoing servernames are the same.
Anyone got an idea what that might be?

BlackBerry is all about Security!

Can different cluster of SAP Business One installed on the same Server

Hi!
Can anyone tell me if B1 different cluster version installed and run on the same server. Example B1 2005A AND B1 2005B. If it can, could you please include the procedure how can it be done.
Thanks,
Jo Borlagdan

No, A and B have different patch cycles - so there would be conflicts in SBO-Common. Therefore it will not work.
You could try to workaround that with named instances of MSSQL, but installation & update would need additional care + workarounds.
The best way to combine 2 SAP Business One cluster "servers" but still on one hardware would be to use a tool like VMWare... - but such a configuration has not been released by SAP - i.e. if there's an issue that could be traced back to the VMWare system, SAP might not be (li?)able to fix it
Sorry,
Frank
Message was edited by: Frank Moebius
BTW: Please note that you need to think eventually about conflicts with MS licenses. SAP has an agreement with MS which ASFAIK covers the license for 1 VMWare Windows system on 1 Windows PC so that we can use WMWare for SAP Business One sandbox systems - after RAM upgrades () it works fine...

Can R12.1.3 and R11.5.10 be installed on the same server?

Hello there,
We are currently running Oracle eBiz R11.5.10, and would like to install the latest version R12.1.3 for testing purposes.
Can R12.1.3 be installed on the same server (for both database and application tiers) as for R11.5.10? Any pitfalls that we need to be aware of if we do this?
Thanks for the advice.
Cheers!

Nothing would stop you from installing 11i and R12 on the same server as long as ORACLE_HOMEs, APPL_TOPs, and COMMON_TOPs of each instance are installed in separate directories. The only pitfall would be the performance (unless you have sufficient resources).
Please don't consider this plan for production instances!
Thanks,
Hussein

Having two background brarchive running at the same time with -f 1 options

Good morning,
I need to run two brarchive in parallel as background process.
I would like to have on for the save and one for the copy.
I need that because they would have different files.
1. Is this configuration supported or not?
As a file is created for the locking (.lock.bra) I have the feeling that a single process is supported?
2. Just to double check, can I run two brarchive with two different config file in a serial manner
(lauch the 1st one, wait for its end, launch the 2nd one, waits for its end).
3. If you are using that kind script on your systems, could you please provide them?
4. If brarchive is launched by a script how do you shut it?
Do you do just a kill of the script or do you kill it and send another signal to the brarchive if it is currently running?
Thanks in advance for your answers.

Good afternoon Eric,
> Why do you want to use option -f 1? what are the reasons being this?
-f makes it run in background.
For me, there two advantages for doing that.
1. You start it once, when you start sap, and it runs regularly
2. When you stop sap, you stop braarchive. Then you are sure that no crontab jobs are going to be started when you have stopped SAP.
> you want to stop brarchive with option -f running? try:
>
> brarchive -f stop
This is what is currently done right now.
It works well.
I can use it because we do a single copy of the archive log up to now.
We are going to run two brarchives (one to save to a tape robot with backint and one that scp).
I would like this to run as daemon.
Now, that you have answered that I can not have two brarchives running at the same time (thanks for your answer),
I need to write my own daemon in sh or perl that would do:
1. Run brarchive first run (with -p backint init<SID>.sap file)
2. Wait for the en of the brarchive process and log
3. Run brarchive second run (with -p scp/stage init<SID>.sap file)
4. Wait for the end of the brarchive process and log
5. Sleep during a few minutes
6. Handle stop signal so that it ends the forked brarchive that may be running.
I am sure that people on this forum have already wrote such scripts.
I may open another thread as it divert a little from my original question.
Thanks in advance for your help.

Create dev and test instances of Apex on the same server and database

I have a dev and prod instances of Apex on different servers. I want a test instance on the same server as the dev instance.
I am using workspace export/import so all instance workspaces have the same workspace id. The application ID is the same on each instance, in the same workspace. This allows pages to be exported/imported in the differenct instances.
My question is (I am sure it is obvious) can I have more than one instances of Apex on the same database (dev and test) and have each instance have identical Workspace IDs, etc.
Sam

Hi Sam,
But you can have more than one database on the same server.
What we do is create a separate database for each APEX versions we are supporting (we still have a customer using APEX 2.0).
All the databases are accessed with the same APACHE config. All you have to do is change the DAD and have a separate dad for each database (i.e. each APEX versions).
ex : /pls/apex_dev /pls/apex_test
This way , I can run different APEX versions on the same server.
Francis.
http://insum-apex.blogspot.com/

Can FMS 4.5 be run on the same server as Cpanel?

Similar Messages

Maybe you are looking for