Can Folder View be Set to Show Hierarchy by Default?

I am working in PSE8 Organizer. When I open the Folder Location view I always have to "drill down" from the C drive in the hierarchy to the folder I want to see. Is there a way to set the Folder Location view to open and show by default the hierarchy so I can go directly to the folder I want?

I wish it worked exactly the way you described, but by playing around with it I discovered that I need to open the folder location view first and then click on an image and suddenly the folder list popped open and showed me which folder contained the image. Thanks so much for the clue!!

Similar Messages

Can't view the setting manager

Hi, I'm using mozilla firefox as my browser and I can't play games online in facebook. I have tried to change the Global security setting panel but I can't view the setting manager. It's blank so I can't do any changes. I need help with it please. thank you

Your Welcome Chris
FYI, here's a summarry of my experience and findings from various forums regarding this update, hopefully it will help prevent others from the same issue or prompt someone to figure out a solution. From what I've read, my experiences or any combination of them are not uncommon;
I'm running Windows 7 x64 (updates current), IE9 on an HP ProBook 4730s. 2 years old, never had any issues
Last week Windows wanted to restart to perform updates. I let it and after restart I allowed Adobe to perform the updates that had been prompting me to install for a couple of days( Flash 11.6.602.171). Within minutes I started experiencing Blue Screens. This would happen randomally about every 5 - 10 mins. only with Internet Explorer.
Cause of Blue screens point towards igdpmd64.sys which is an intel graphics driver for hd3000 graphics ( I have intel hd3000 and AMD Radeon graphic chips.
I deleted all graphic drivers and reinstalled current ones from HP and got rid of my blue screens.
All worked well except, there was no Taskbar live preview(only showed icons instead of actual window), no silverlight video(blank section on screen), no embedded flash objects(only blank section on screen), Youtube worked fine, and no output for auxillary monitor on VGA or HDMI port.
I updated to IE10 with same results
I tried earlier versions of Flash with same results
I uninstalled kb2670838 and all works fine
Uninstalling kb2670838 also reverted back to IE9 so this update must be required for IE10
Hours and hours of work because of an issue with a Microsoft update. All issues are related to graphic problems, yet, the update was to improve performance of various graphic components. Yeh, it sure did! LOL
Hope this is helpful to someone.
Mike

Can't view the setting tab to edit

I have WRT54GS I can't view the setting tab to check or change. It seem the tabs are light in color and I click on them. I did have a virius which I got rid of. I have removed the linksys software and re installed it the same problem.

Let me know of which setting tab that you want to check or change? Secondly which Linksys software that you reinstalled… Once reset the Router, power cycle the whole network and reconfigure it … For the reconfiguration of the Router, let me know the name of the ISP (Internet Service Provider) or the connection type that you are using means it is a Cable Connection or DSL connection?
So if you have a DSL connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
So if you have a Cable Internet Connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
So after configuration check whether you can see the tab that you are looking for…

I can't view a purchased TV show in my Videos app

I purchased and downloaded a TV series from iTunes and was able to watch the first of six shows without any problems.
Every time I try and watch the other shows I get a pop-up message that says "The requested URL was not found on this server". Can someone please tell me how I can fix this problem?
If someone could provide some assistance, it would be greatly appreciated. Thanks in advance!

Redownload iTunes Purchases via iTunes
To begin, go to the iTunes Store via the iTunes program installed on your desktop or laptop. On the right-hand side of the screen, there will be a menu called Quick Links. In it, click thePurchased link. This takes you to the screen where you can redownload purchases,
In this list, there are two important groupings that allow you to sort your purchases:
Type of Purchase: This first set of buttons lets you choose whether you want to redownload music, movies, TV shows, apps, or books
All/Not In My Library: All, of course, shows you all purchases from your iTunes account. Not In My Library shows only purchases from your account that aren't on the computer you're currently using.
When you've selected the type of purchase you want to redownload, your purchase history will be displayed below.
For Music, this includes both the artist name at the left and then the songs by that artist at the right. If a song is available for download (that is, if it's not already on that computer's hard drive), then the iCloud button--a small cloud with a down arrow in it--next to it will be enabled. Click that button to download it. If the button is grayed out and reads "Downloaded," then the song is already on the computer you're using.
For TV Shows, the process is very similar to music, except instead of artist name and then songs, you'll see the show's name and then Seasons or Episodes. If you browse by season, when you click on a season, a window will pop up listing all available episodes from that season. Choose Episodes and you'll simply see a list of episodes organized by episode number. In either case, the same iCloud button as appeared for music is used to download TV (if the episode is already on your computer, the "Downloaded" button will appear).
For Movies, Apps, and iBooks files, you'll see a list of all your purchases (including free downloads). Movies, apps, or books on the computer you're using will have the grayed-out "Downloaded" button next to them. Available downloads will have the iCloud button. Click the button to download them.

Is this a bug? Document Library view has the wrong 'Show in Folders' option when created from custom site template.

I have a site with the default document library.
I add views to the library, some ask for the items to be shown in folders, some not.
I create a site template via the SharePoint UI.
I create a new site.
In the new site, the library exists, the views exist, but all the views are set to show the items in folders.
Does anyone else have this problem? Is there a patch or any workaround?

Hi ,
According to your description, my understanding is that view property "show all items without folders" is not preserved in packaging and is lost after we create a site using the saved site template.
For your issue, I can reproduce your scenario in my environment. It should be caused by the scope attribute is missing. For a workaround, you can try to crack the site template wsp, add the missing scope
attribute to the View schema in the list schema.xml.
Also, I recommend you open up a ticket for deep investigation.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

PSE9 and Folder View changes

I recently upgraded from PSE7 and it appears that in this version you can see only the folder you click on and sometimes not even that.
Is there anyway to see all the selected photos grouped by folder as I could do in all earlier versions?
Even worse, I had a small database with all photos in a single folder. When I switch to folder view (with all images showing in thumbnail view) then all photos disappear!!! Even though the icon in the finder view indicates that there are photos in the folder.
My databases have had thumbnails refreshed, no images need to be reconnected, and have been optimized and repaired.
In case it matters: Windows 7 64 bit with all updates applies to PSE9.

The 30 day free trial is an excellent idea. The problem for upgrading users is the difficulty of keeping things viable for the older version while actively using the new one.
Elements data is extraordinarily difficult to fix when anything gets messed up in the connection area. Trying to reconnect photos once PSE (every version) loses its links is unbelievable. The program is extremely stupid. I had an entire database that somehow had the "C" replaced by "F". The remaining parts of the file names were unchanged. It took me the better part of two days to fix. Any decent programmer (I am a semi-retired programmer with about 45 years experience) would have the sense to first assume that the device was wrong since that happens so easily.
I figure my problem was caused by my repair of a crashed disk where I had to restore from backups. The "F" disk was the source of the backup and data was put on C: yet somehow all links were lost.
Don't ever try to use DVD's as anything more than a backup either. Newer versions cannot always read the DVD's so recovery that is even worse.
I am far off thread, but all relates to using a free trial. I would expect links to be messed up in the process.
Also, the old folder view made fixes much easier - I dread trying to change locations with this buggy folder view.
Ah well, thanks for the comments.

Show attachments by default...?

Hello,
I would like to set the "Show attachments by default" property of a document programmatically, but am not having any luck finding how to do it in the SDK documentation.
Is this possible?
Thanks.

Thanks for that, but I'm not having any luck.
I'm kind of new to scripting PDF's and I'm not sure exactly where I would put the line of code you gave that would cause the attachments panel to open when the document is opened.
I have tried a number of ways to add a "Document JavaScript" to the document, but no matter what I do, the code seems to be ignored after I save the PDF, close and reopen it.
I can make the line of code work (slightly modified to include "this.") when I put it in the action of a button, so I know I'm on the right path, but for some reason the document javascript is being ignored.
Any suggestions?
Thank you.

How can I choose 60x60 pixel in Automator's Set Folder Views?

Hi, I was looking for something that can change Folder Views for several folders at once; I think Automator can help me do that, but I'm stuck on two problems:
1. It doesn't allow me to choose 60x60 pixel, only 56x56 or 64x64.
2. It doesn't allow me to set the grid spacing.
Is there a way to choose 60x60 in automator (it is selectable in Finder's Show View Options)? If it's not possible, what's the most likely workaround? Applescript? Or perhaps some 3rd party apps?
Thank you for your time.

Try looking into ' *mac os x: batch rename freeware* ' via google search?
http://www.google.com/#hl=en&expIds=27022&sugexp=leprodsca4&xhr=t&q=MacOS+X%3A+batch+rename+freeware&cp=31&pf=p&sclient=psy&aq=f&aqi=&aql=f&oq=Mac+OS+X :+batch+renamefreeware&gs_rfai=&pbx=1&fp=8bc48c66f0d3c525
An example of a batch rename file utility that may (or not) be of some use...
• NameChanger - MRR Software:
http://www.mrrsoftware.com/MRRSoftware/NameChanger.html
• Name Mangler - Elegant batch file renamer: low cost, fair trial period
http://manytricks.com/namemangler/ - this may be worth a try.
There also are some instructions or ideas online and in your Help viewer on how to use
Automator to do these kinds of tasks within the supplied & supported Mac OS X system.
Or other methods within the various OS X unix systems to create a workflow.
Good luck & happy computing!

Can Aperture not be set up to show a "Last Import" smart folder?

I'm trying to make the transfer from using iPhoto to using Aperture.
One thing I found really great in iPhoto was the smart folder that was simply set to show the last import, no matter when that import was done - whether it was today, yesterday or 6 months ago.
The reason I found this so handy was because I set my iPad up in iTunes to only sync the photos from that Last Import smart folder, rather than all my photos.
That way, every time I synced my iPad, I always had my most recent photos on my iPad, no matter when the pictures were taken.
Now with Aperture, I cannot see a way to create anything similar. The best I can do is to create a smart folder with photos imported within the last month, let's say.
But the problem with that is that if I haven't imported any new photos for over a month, then the next time I sync my iPad, then all my photos will no longer be on the iPad.
If I create a longer timeframe, to let's say 3 months, then I might end up with way too many photos trying to sync across, and that's something I don't want. I could end up with hundreds and hundreds of photos, and I don't have the free space to be able to do this!
When I used "Last Import" with iPhoto, then I always only had around 50 or 60 photos, because that's just generally how many I usually imported at any one time. Sometimes it was more, sometimes less, but the average worked for me.
So to sum up: Can Aperture not be set up to show a "Last Import" smart folder, regardless of date?
Or alternatively, is there any way I could "hack" or "trick" Aperture into doing something like this so that I always have a managable amount of the most recent photos on my iPad?

Hello Brett,
that does not seem to be an easy probem as you discovered.
Some Workarounds:
You might to use a smart album rule "Import session is" instead of a date range, but that will not be automatic.
Create a folder "recently added" and keep your recent projects inside that folder; create a smart album at the top level of that folder; move older projects somewhere else.
Or enable the Photo Stream - that is the current replacement for the "most recently added" album; it will (is supposed to) always show the most recent 1000 images.
If you are familiar with AppleScript, you can make Aperture run an AppleScript on import (Import Settings) to add your imported image to an album of new images. From time to time remove the older images.
Sorry, but no really convenient way to do it..
Regards
Léonie

Just received replacement iPhone and trying to set up. Can't get photostream photos to show up on new iPhone even though all 1800 pics show up on Mac iPhoto and iPad photostream. What can I do to view my photos on my phone?

How can I get my photostream from Mac and iPad to show up on my new iPhone 4 replacement. Broke my iPhone and received a new one but can't get it set up to see my photostream. Can anyone help?

If her data was not backed up or synced to something, it's gone. Sorry.

Where can I find a tutorial about Show Folders Hierarchy?

I have Permiere Elements 11 which also has the Elements Organizer as part of the program. And I have Photoshop Elements 10 also. The Elements Organizer with the video editing program is what I'm interested in though. I think my folder hierarchy is not right. I'd like to straighten it out but I don't know how. Can someone direct me to a tutorial on how to work with the Folders Hierarchy.
This might be a different question, but it might be related to my confusion about the Folder Hierarchy in the Organizer. On June 10 I was copying some photos from my hard drive to the Organizer - probably a dumb thing to do. While I was doing this, the Pictures folder (View and organizes digital pictures) no longer took me to all my photos on the hard drive. The Pictures folder is under Personal Folder, Documents, Music, Control Panel on the Windows 7 desktop to the right of the Start Menus stuff.
When I click on Pictures now I get two folders: Adobe and Pictures. The Adobe folder has these values - Size: 0 bytes; Contains: 0 Files, 1 Folder; Created: Monday, June 10, 2013; Attributes: Read-only (only applies to files in the folder. I deleted the Abobe folder several times but it keeps coming back.
What I would really like to do is to restore my Pictures folder to its original state so that I will have access to all my hard drive photos immediately instead of clicking around in those folders. I vaguely think that something I did to the folder hierarchy in the Optimizer has messed up other things on my computer.

You wrote, "So if you moved the files, what you need to do is move them back..."
I don't know how to do this. Could you tell me how. I moved about 50 photos into the Organizer. Now I know I should not have done this. I'd like to correct the mistake.
When I click on the Show Folder List icon this is what I see:
My Pictures
     Pictures
          Faces
               Clowns
     My Videos
     Computer
               C:
               Program Data
               Users
                    Tommy
                          Faces
                               Dancing
                               Faces
                               Lovers
                               Racing
                               Tommy
                     Pictures
              D
              E
              F
              G
This makes no sense to me. But I could live with it - except perhaps something I did has made my PrE11 impossible to work with. When I put new clips via the memory card into the program, they do not go into the Timeline. All I get is an error message.
I like the Adobe programs and don't want to give up on them, especially since my problems probably have been self-imposed.

Acrobat X Standard User: How can I view PDF metadata from a folder level?

Hello All,
This is my first post to this community. I would not be surprised if the answer to my question can be found in a simple search or tutorial. However, I assure you that I have been searching, clicking, reading and even attempting to install new software all morning and have only succeeded in further confusing myself.
I'm running Adobe Acrobat X Standard on a Windows 7 machine. My job includes the management of legal documents of conveyance. All conveyance instruments have a set of unique identifiers such as the county where the deed was filed, the book and page where it is filed, the type of instrument, and the date it was filed. Historically I have tried to jam all of this information and more into the file name of a pdf. For example: "105_Bk109-Pg188_Assignment_05251950" is the name of a file that I have open right now that indicates an Assignment filed in Crockett County, Texas (code 105) at Book 109, Page 188 and recorded on May 25, 1950. I typically work in folders that contain around a hundred similar documents with all of the fields I have described varying. My objective is to begin moving this information into the metadata or properties of the individual PDFs AND then be able to view those fields in Windows Explorer from the folder level. As I understand it, this is not possible. When I began searching for an alternative solution, I found several references to Adobe Bridge and attempted to install it. The installation failed, but more importantly I am not interested in becoming a CC user as I don't feel like it is necessary for what I am trying to accomplish. I'm not working with HD photos or video.
So my question is this: Is there a way (that doesn't involve purchasing and learning Adobe Bridge) that I can modify the attributes/metadata/properties of a pdf, and then see the modifications in a folder viewer without opening the pdf? Thanks in advance for your help.

Thanks for responding. I suspected that my understanding of metadata was incomplete or inaccurate. As I understand it, the metadata for any given pdf can be found by first opening the pdf; clicking File -> Properties, which opens a dialog box titled "Document Properties". The first tab in the dialog box is "Description" and includes the fields File, Title, Author, Subject, and Keywords. The values for these fields are what I'm referring to as metadata. Additionally, from the Document Properties dialog box, clicking on the "Custom" tab allows you to create custom properties and values, which I also considered to be metadata. I have manipulated these fields for a certain pdf as shown in the two screenshots below:
After making this changes, I saved the pdf and closed it. I then navigated to the folder where the pdf is stored using Windows Explorer. As you can in the following screen shot of WE, that the pdf I have made the changes to is the first in the list. The Windows Explorer columns include: Title, Pages, Author, and Subjects, but their values are all blank and fail to show what I have assigned them in the PDF properties (or what I thought was metadata). As for my custom fields, Windows does not give me any kind of option to display those. Windows inability to display something as simple as the number of pages in the PDF is completely baffling to me.
My objective is to be able to modify the standard document properties of a PDF with usable information, those being Title , Author, Subject, and Keywords. I would also like to be able to create the custom properties with additional useful information. I would then like to be able to use a file manager, to view the contents of a folder full of pdfs, similar to the screenshot above, and see the properties and custom field values that i have assigned to the pdfs in columns of the list of pdfs. Windows Explorer is the only file manager I have ever used. It's possible that the solution to my problem could be as simple as changing file managers. It may be that what I'm after is not possible at. Any suggestions would be greatly appreciated. Thanks.

Where is the file that contains the folder view setting?

I know this questions been asked before but I can't find it and cant remember the answer. There is directory file that holds all the file and folder setting and if a persons deletes it, essentially all the files and folder view setting revert back to default view, which is a white back ground and icon view. I can't remember enough the name of the file to know for sure I am getting the right one, could some please quickly refresh my memory for me. I would appreciate it, Thanks Gf.

I believe that that info is stored in the .DS_Store file in the relevant folder. Since it's invisible, you can either use one of the tricks to make the Mac show invisible files (Google will help you there), or you can use the Terminal. To delete it, in the Terminal, type "cd" (minus the quotes), then a space, then drop the folder in question on the Terminal window and hit return. Then type "rm .DS_Store".

How can I make folder View Options the default in Snow Leopard?

Hi everybody! Here I am, learning to Mac!
When I do a secondary click on an open folder's background and click on +show visualization options+ (actually, +mostrar opciones de visualización+ in spanish), there's an option +set as default+ ( +ajustes por omisión+ ) which, as far as I understood, should change all the rest folder's aspect, as icon's size, font size, background image and so on... but all the rest folder's aspect keep being shown as before, just the folder where I am working changes.
My questions are: if I am wrong with the use of that "ajustes por omisión", what is it for? And how can I personalize the aspect of all folders on my mac?
Thanks for your help

It's "show view options" in English. Also obtained by typing CMD+J
Those only apply to the top-level folder. Each folder you open uses whatever you've elected to use as the defaults. Select a folder, CMD+J, set the view as you desire, click on Use as Default button. That setting will be used for all windows that you open in the future that have never been opened previously. All other windows that you opened will retain whatever view you previously selected for them.
If you want to reset everything to one view, close all open Finder windows, launch the Terminal app (/Applications/Utilities/), copy & paste this command into the window that pops up,
find ./ -name ".DS_Store" -depth -exec rm {} \;
hit the return key, quit the Terminal app, restart, open a Finder window, CMD+J, set up the view options as desired, click the Use as Defaults button, and close the view options window. Now, every Finder window you open will have this view.
Once you sort this out, see:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Show image thumbs on "Folder View". Like in "ACDSee"?

Set Bridge to to show first 4 image thumbs on "Folder View". Like in "ACDSee"?

Not as far as I am aware, but here's what you can do:
You can stack images and then, you're going to see one image on top of the stack, like this:
When you move the cursor over the stack, play button will appear and you click on it to play all the images in the stack.
Also, remember that you can make the thumbnail as big as you want using the slider at the bottom of the Bridge interface (a slider).

Can Folder View be Set to Show Hierarchy by Default?

Similar Messages

Maybe you are looking for