Can G4 PowerMac MDD take advantage of SATA II hard drive speed?
A PowerMac G4 MDD has 33Mhz PCI slots and a 167Mhz bus -- correct? Can this architecture take full advantage of a PCI SATA II controller card (if it exists for a Mac) and a connected SATA II hard drive w. 16mb cache operating at 3Gb/s? Or even a 1.5Gb/s SATA I drive? Thanks.
Hi-
Or am I trying to cram a V8 Hemi engine into my Mini Cooper, but just hooking it up to my 4-spark plug ignition system to run it on four cylinders?
Aw, you outa get at least 6 cylinders worth out of it...and it will be one mean Mini C!
The SATA won't run at it's potential, there is no doubt. But, you will see performance increases over the ATA drives, this is for sure..
In my Sawtooth, after I installed the SATA drives, the speed increase was palpable. The SATA drives have better performance characteristics than ATA, and even without full data transfer rates, the increase in bandwidth, the speed of the drives, and the increase in cache definitely help performance.
As for the question of SATA vs. SATA II, SATA II drives are all backward compatible to earlier SATA standard, so there is no reason to "limit" yourself to early SATA. Most all controllers are SATA II standard, and the SATA II drives are the latest in technology, and give the greatest benefit.
I would recommend the Firmtek Seritek line of controllers. Bootable, and reliable.
Similar Messages
-
How large a hard drive can stock PowerMac MDD take?
It's me again. Great forum -- thanks.
I want to install a 160GB HDD in my PowerMac MDD. Do I need a special PCI controller card or will the onboard controller work for this capacity HDD? Thanks.Interesting little app. -- Coconut Identity Card.
But when it first launched and automatically determined a date and origin, it was way off -- 2005 and China. So, I clicked on the "Custom" tab, and manually (will not let you paste) put the serial number in. Then it gave me a more realistic date and origin -- Nov. 2002 and Sacramento, USA.
Looks like my MDD passes the June, 2002 cut-off date. Thanks! -
Can the iMac G5 take advantage of CAS2 or 2.5 RAM?
Can the iMac G5 take advantage of CAS2 or 2.5 RAM? I know it comes with CAS3 RAM.
THANKSrob_ART:
i I've run some tests on a Power Mac with mixed results. In most recent tests, I saw an 8% advantage running the RAM preview render in Motion 2 with CAS 2 memory vs CAS 3.
It's possible to to it any number of ways. Some memory controllers will dumb it down and select one conservative CL value timing and stick with it. Others could bump it up.
It's unlikely to be that critical. A .5 cycle advantage wouldn't be that noticeable to most people, but some gamers insist on extracting every last bit of performance from their memory. -
Can i install sata III hard drive?
Hi, i've an iMac G5 20" iSight with an intel core duo 2ghz. I would like to know if i can install a sata III hard drive like 128GB Crucial m4 2.5" SSD.
Thx a lot.First, you do not have an iMac G5. G5s are PPC machines, but yours is an Intel model.
You can install a SATA III drive but I would not spend the money since your model only supports SATA I or SATA II depending on which model you have. I would also be careful about using Crucial SSDs because they may not all work in a Mac. I would get your SSD at OWC instead. You will find their equivalent product for SATA I or SATA II here. I have two of these drives, and they are excellent. -
After I download my music into library and put it on the cloud, can I delete my library so it doesn't take up space on my hard drive.
I thought maybe it would be a little easier to understand where I am getting all these numbers from if I gave you guys some screenshots.
Here is the information for the original files (pulled straight from the card onto the external):
Here is the information for the FCP Library:
Here is the information for the folder within the FCP Library called "Original Media":
And finally, here is the information for the folder within the FCP Library Called "High Quality Media": -
When I set up my Macs, there were 2 sign-up names - 1 I created and the other was "Ghost". The Apple store says that takes up 50% of my hard drive. Can I kill "Ghost"? Do I just delete it?
Thanks for your help!Hello Blisshous,
It sounds like you have a user account named Ghost, that you want to delete all content from and remove from the computer. This article will help you do that named:
OS X Lion: Delete a user account
http://support.apple.com/kb/PH3867
Choose Apple menu > System Preferences, and then click Users & Groups or click Parental Controls.
Click the lock icon to unlock it, and then type an administrator name and password.
Select the user account you want to delete, and then click Delete below the account list.
Do one of the following:
Select “Save the home folder in a disk image” to save the folder as a disk image in /Users/Deleted Users/.
Select “Don’t change the home folder” to leave the home folder in /Users/.
Select “Delete the home folder” to remove it from the computer. If you want to prevent programs that read raw data from retrieving any files, select “Erase home folder securely.”
Click OK.
Keep in mind, if you remove the user and delete the data, without Time Machine you will not be able to restore any data from it in the future.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7. -
Why can't iTunes find the music from an external hard drive?
I moved my music to an external hard drive to free up space on my old laptop. Since I moved to a new laptop, iTunes never seems to find the music. I have to go through and manually select a song for it to find it one and then it says should it use this to find the rest of the songs. Then it crashes. I have reinstalled iTunes tonight with no real improvement. I want to be able to create a playlist to upload to my new iPad as well as updating music on my iPod but I can't do any of it. Please, any advice!
angelafromlanchester wrote:
I moved my music to an external hard drive to free up space on my old laptop. Since I moved to a new laptop, iTunes never seems to find the music.
Has the new laptop given the external drive a different drive letter?
The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
tt2 -
My iMac G5 cannot detect my Seagate 160GB SATA II hard drive
Hi,
My mac is iMac G5 1.6G 17 inch with no iSight.
Recently i buy a new Seagate 160GB SATT II(ST3160812AS) and try to replace with my old internal hard drive.
First i use the SuperDupe! software to clone with my old HD.It works fine and can be read the data via a external SATA box.
Then i shut down the Power and follow the instruction provied on the Apple web site to replace the HD.
After i replace the HD and power on the mac, the display only show a gray backgrounp and the apple mark does not show up!
I recheck the install and the data/power cable is well and connected.
I use the Mac OS X install CD to run the disk utility and i found the cd-rom is the only device it found!
I try to reset the PRAM and NVRAM, the problem still exists.
I sent back the HD to the store for fix and they said the HD works fine on a PC!
So, is there anything i missed to replace the new HD or the iMac just does not support a SATA II hard drive?
Thanks a lot
iMac G5 1.6G 17 inch Mac OS X (10.4.4) the new HD is Seagate Barracuda 7200.9 160G
iMac G5 Mac OS X (10.4.2)So that I get this right, you cloned the internal OS X drive onto an external FW-SATA HDD using SuperDuper! ?
There sounds like an issue that the iMac doesn't recognise the SATA II drive for some reason - would've thought it should do.
A quick trawl through the knowledge base should reference any info that the iMac only supports SATA I for your revision, which I'm guessing is A.
Just checked - as you should/could have - the iMac you have only accepts PATA drives. So you'll need to exchange or buy an ATA 6 HDD for your iMac to work, without booting from the external drive. -
Can anyone help me with advice for a replacement hard drive
Hi there,
Can anyone help me with advice for a replacement hard drive and RAM upgrade for my Mac Book Pro 5,3
Its 3 years old & running Snow Leopard 10.6.8
I do a lot of audio & movie work so performance is important.
The logic board was replaced last summer & I was advised to replace the hard drive then...oops
Anyway it has limped on until now but is giving me cause for concern...
I have found a couple of possibilities below...so if anyone does have a moment to take a look & help me out I would be most grateful
http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=sr_1_1?ie=UTF8&qid=1356787585&sr=8-1
http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=pd_s im_computers_5
Kind regards
NickThanks guys that is so helpful :-)
I will follow your advice Ogelthorpe & see how I get on with the job!!! Virgin territory for me so I may well shout for help once my MBP is in bits!! Is there a guide for duffers for this job anywhere??
& yes in an ideal world I would be replacing my old MBP but I'm just not in a position to do that at the moment....let's hope things pick up in 2013
All the very best
Nick -
Can't get computer to see galaxy note 3 hard drive?
can't get computer to see galaxy note 3 hard drive?
One last thing to add into the mix.
As you know your Router will have to probably need to be manually confiqured.
Your Router has an IP address of 192.168.1.1
The 1st port to the first machine should have an IP of 192.168.1.2
The 2nd port should have 192.168.1.3
Each corresponding port needs to have assending IP addresses.
Checking the paperwork that came with your Router will explain how to manually confiqure it.
Sometimes a complete System reset will also help.
Modem Router and Shutting off all the machines.
When powering back up start with your ISP's Modem and after it has aquired the signal and lights then you can power back your Router, and the same there wait for it to reacquire the signal and the lights each will take a minute each. Now you can restart your computers one at a time and try them. You might want to double check the cable on your troubled machine and also try switching the ports on the router and if none of this works it sounds like a bad Ethernet Card.
Don -
Why does firefox's internet files take so much space on hard drive?
Why does firefox's internet files take so much space on hard drive?For example, I have 9,80GD on disk and after looked 2 video on youtube(2-3 min each) it's become 9,60GB. It's 200MB gone!
Diane Wordsmith wrote:
If you did not see the dialog box asking if you wanted to delete from the hard drive, I think this may be one of those options where you can say "Don't ask again," meaning until you trash your iTunes prefs, it will cease asking the question.
you can bring those dialogs back. iTunes > preferences > advanced > reset all dialog warnings
JGG -
I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
DavidEither of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk. -
My hard drive on my computer crashed! This is the computer my ipad was sync with! All my photos of my three girls are on the ipad, but how do I get them transferred to either an external hard drive or to another computer - or just have them all printed - nearly 1000 photos!
Also, can I back up my ipad with an external hard drive? If I try to sync to a new computer it will erase everything I currently have on the ipad , correct?
Thanks for your help - I am worried if I don't do something quick, my ipad will crash too!Right. You didn't read the post, you only read the title.
The title came from an earlier step in the process when I was posing a question to the systen.
The pertinent part of the question is "How to I back up documents that are stored in iCloud"
That the destination for the backup is NOT my internal HDD should be clear from the rest of the post.
And frankly, even if that is where I want to back up to, that would at least give me two copies, at least giving me one duplicate of the stuff on iCloud.
So please stop wasting my time if you can't answer the actual question: How do I backup content that is stored in iCloud. The destination of the backup is irrelevant.
--P
Maybe you are looking for
-
SOLMAN 4.0 SR2 connect to SAP R/3 Three System landscape (DEV QA and PRD)
Hi, We have successfully installed SOLMAN 4.0 SR2 (ABAP + JAVA) on WIN2003 SP2 EE MSSQL 2005 EE SP1. I just want to activate the service so that SOLMAN could see my existing SAP R/3 4.6 C Three system landscape (DEV QAS PRD). I heard settings should
-
Problem - different classes in a custom list
Hi, Im making a school project and must use this List-class, written by some of our teachers. The problem is, the nodes in the list are type of Objects, and i must store multiple types of classes in the list. Storing works fine, but when i want to do
-
Dear All, We have an issue with system number in our production system. We have generated SAP license key for production during our SAP implimentations. But after that due to some major problem we have again reinstall SAP system and regenerate SAP Li
-
Any idea why my recent calls would transition from the contact name to just showing the number?
-
Hi, I have created a website featuring a lightbox on several pages. This works fine when I preview them, but isn't working on the live website - can anyone help? here's the link to a temporary page: http://www.vdubbers.co.uk/hoodies.html Thanks.