Can GB3's Stop, start, rec, FF, & RR be controlled by the Line6 KB37?

I can get other controls to work like Pan and Channel volume, but not these functions. Does GB3 support these features?
Thanks all!

GB does not use standard commands, the only device that can control GB is this one

Similar Messages

I need to make a stop start animation using iMovie. I need the time factor to be 0.03. Every time I make an adjustment it goes to 0.1s which is too slow. Does anyone have a suggestions?

I need to make a stop start animation using iMovie. I need the time factor to be 0.03. Every time I make an adjustment it goes to 0.1s which is too slow. Does anyone have a suggestions?

First, for Stop Motion Animation, there are better tools. These include iStopMotion and QuickTIme Pro Version 7.
If you want to do it in iMovie, it is possible, but slow.
First, go into iMovie Preferences, and make sure you check "Display Time as hh:mm:ss:frames". This will let you edit to the frame lever rather than to the nearest 10th of a second.
Second, see this Tutorial by Jon Walker on how to edit down to a single frame in a still image sequence.
You can modify his technique to get 2 or three frames.

When I try to use the clone stamp another layer of my picture is copied on the photo I'm working on. Is this a defect or is there a tool I can use to stop it and return to normal usage of the clone stamp?

When I try to use the clone stamp another layer of my picture is copied on the photo I'm working on. Is this a de@@@@fect or is there a tool I can use to stop it and return to normal usage of the clone stamp?

The "Sample Field" letters are very dim. After punching several times the right click revels "Clone stamp mode". The next little circle has a line through it and after several right clicks, it says: "turn on to ignore adjustment layers when cloning," Despite this I cannot get any kind of a response to change any of the existing entries. Bob
Robert Mcdonough
[email protected]

Can I get stepped out put voltage signal for controls from the BNC with Labview?

Hi!
I am new user to NI Labview. I am working in controls applied in Combustion sciences. I want control the Solenoid valve ( Jefferson made,230 V, 11 W) in stepped manner. BNC (2110) is used for the input signal (Piezoelectric pressure transducers) and output signal. The maximum out put voltage from BNC is 5 V. Can I get the out put voltage in stepped and increasing order to ensure the better controls of the solenoid valve?
Also I would like to know, is it possible for me to control the working frequency ( Injecting) of the solenoid valve with the help of Lab view?
Thanks.
With Regards,
Ganesh

Just having the same issue there, which is real not fun, I have not tried to contact them, but looking at your experience I am not sure if I should.
My key comes from the back of a laptop o so I guess that would be a W7
OEM, and that could explain why you can't download a ISO from their website, would that also your case ?
Also could it be because we are attempting to get the ISO after the product became EOL ?
http://windows.microsoft.com/en-us/windows/lifecycle
Maybe I will give a go with the customer care people and maybe I will get a right answer ;)
Will keep you posted

How can I get a start-time modified song to play with the modification on my ipad2? The sync shows the modification.

I shortened a song in my PC iTunes music library by using "get info" options and start time. The change shows up in my PC iTunes library for the song and after syncing, in my ipad2 music library when hooked up via USB. The song plays at original length on my ipad2. Weirdly enough, after syncing with my iPod, the song plays at the shortened length on the iPod. A previous sync with the ipad2 sent the shortened version to the iPad with no problems. The next time I synced, and 50 times later, all I got was the long version. It's a trivial matter but I need the song for a slide show presentation at a high school and the first few seconds of the song feature an expletive that I obviously can't use. Help! This is maddening.

We are Apple users here, and we answer technical questions.
Sorry, we cannot help you.

How can text messaging stop from 2 different Iphones and change from the blue to the green and not go thru?

while in the middle of texting with a friend the bubble turned from blue to green and wouldnt go thru since I dont have regular texting on my phone...all my other Iphone friends and family still are working. Just this one person has been locked out. Who or what do I do?HELP!

There have been iMessage problems for about 2 days that are not impacting everyone. I'm pretty sure it's not your phone, but the service issue that is impacting you.
Try again soon and it should start working again. There are lots of complaints about it again today.

Hi my iphone 5 has started recently to operate voice control all the time

why is my voice control activated all the time?

Have you jailbroken the iPhone? If so, you will need to restore it to factory defaults to undo the jailbreak, and then never jailbreak it again.
If it's not jailbroken, there is no known malware capable of infecting it. So the problem lies somewhere else. Convincing your carrier that it's not a virus, and is a problem somewhere with their system, will likely be difficult. You may need to restore it to factory defaults to get them to pay attention, and even then they may fall back on some nonsensical argument about malware in your phone's firmware in order to dodge their responsibility.
If I had to guess, I'd say that someone is probably spoofing your phone number when sending texts. Your carrier ought to be able to track that down, if you can convince them to try.

Stop, start all nodes.

To shutdown database instance on all the nodes in a clusterd env/. I use
srvctl stop/start database -d dbname
Likewise what is the best way for ASM and cluster?
Thanks!

there is no command to startup from a single node or group command. Correct? Yes, that's correct.

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

Can I use my Time Capsule for wifi parental control?

Can I use my Time Capsule for WiFi parental control. The objective first is to use a time clock to control internet access (completely on or off). Second objective is to use the Time Capsule which is also the WiFi router for more selective internet control? Anyone out there have any tips on making this work? We have Time Warner cable feeding the house internet, which is then corrected to the 2Tb Time Capsule which also provides our WiFi. Any information including other alternatives would be most appreciated. Surely we are not the only parents on the planet with this issue. Thanks very much!

how do I get the Mac addresses for each device (this won't be a problem, I demand the device, check it, and then return it).
What wireless devices are we looking at here?
Most devices have the AirPort ID or MAC Address or Hardware Address printed on the back or bottom of the device
Otherwise, you can learn the correct number by process of elimination. Turn off all wireless devices except your Mac computer....if it is connecting using wireless.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
Look for Wireless Clients and click on the numerical IP address that is displayed
Another box will open
Look for the Hardware Address. It will be displayed as xx : xx : xx : xx :xx : xx
Write that down and note that it is your Mac.
Now, connect another wireless device and repeat the sequence. Click on the "other" listing that you see to find out more info about that device. Write down the ID or Address and note what device it is. Then power it off.
Do the same for each wireless device that you want to have limited access.
Post back when you have all the info.

How can I stop multiple tabs from opening along with Mozilla Firefox Start Page at launching time.How can this be stopped?

Whenever I launch Firefox, multiple tabs also start to open along with the Mozilla Firefox Start Page, which is very irritating. How can I stop this to happen each time I launch the browser?

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved
It is also possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period

is there an app for iphone which can be set to start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period. basically someone is vandalising my vehicle and i really really want to catch the mongrel
thanks for any suggestions

Nope.

HTTP Listeners shown as running but can't stop, start or configure

In 4.0.8.2 Oracle Application Server Manager Enterprise
Edition, HTTP Listeners, for the "www", the listener shows as
down but is actually running. If I try to stop it, it says it
is not running (the IE dialog box pops-up). If I try to start
it, it says (in a new small browser window) "OWS-08806: Oracle
Web Listener 'www' is already UP and running at pid 0." Since
my site is up, I know it is running. However, how can I bring
it down?
If I look at the Http listener views it shows both admin and
www listeners are up and shows pid's for them. But when I go
to them individually they say they are stopped as I said above.
I use Oracle Application Server Manager 4.0 to view the HTTP
Listeners configuration. The Oracle Application Server Manager
4.0 looks like this:
- name of the site
+ Oracle Application Server
- HTTP Listeners
- host name: admin
Network
Server
etc
When I click on, for instance: NETWORK, it supposed to show me
the properties after prompting for a username and password. But
it just didn't do anything showing page not found.
Any assistance would be greatly appreciated.
Thank You!!!
J

Thanks again.
I'll try to be more clear about my current setup:
Modem
->
Router
DHCP enabled but supplying server with static ip of: 192.168.1.2 - hence my Ethernet 1 settings on my Xserve. The DHCP address the router supplies to other devices range between 192.168.1.101 - 192.168.1.150 (this is temporary). I'm using the Router as a temporary network connection for devices as I continue to setup the server. Once the server is completed, I will hook everyone up through the switch.
->
Xserve
The Xserve receives a static IP from the router above (192.168.1.2) even though the router gives DHCP addresses to other devices. The Xserve then goes out Ethernet 2 to (which has also been assigned a static internal address: 192.168.1.3) a switch.
->
Switch
The Switch definitely has DHCP disabled, and merely extends the network connection.
Right now, the Xserve is doing nothing other than attempting to supply an internet connection to devices attached to it. I performed a clean install after a day or two of troubleshooting.
I really want to be able to control content access as well as give certain devices priority over others using the Xserve. I want it to control... the network, in all aspects: DNS, Open Directory (Master), Firewall etc. Am I still able to control the network with the Xserve if it is hooked up side by side to the clients without reconfiguring my router to hop through the Xserve before going to the internet? If not, why not just use the Xserve as a middle man as I currently do?
What are the benefits of using it side by side to the clients? What are the drawbacks of my current setup? (Other than it not functioning)

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

Hi, ATPMolloy.
I certainly understand your frustration and will do my best to help. I see you have uninstalled and reinstalled iTunes with no change in results. I have attached an article below that specifically troubleshoots this issue that you are experiencing.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jason H.

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

Good work, thanks for the report.

Can GB3's Stop, start, rec, FF, & RR be controlled by the Line6 KB37?

Similar Messages

Maybe you are looking for