Can generate the TKPROF file without the SQL is not running completed ?

Dear all:
I want to generate the TKPROF file from the trace file, Can generate the TKPROF file without the SQL is not running completed ? Is it the TKPROF file can be used? because the report is too large. My environment is ORACLE 11.5.9
Regards
Terry

When you can wait for completion, then that's the easiest route.
When you can't wait, you'll have to use a different method. I suggest to watch the v$ views for what your session is doing. Views like v$session, v$session_wait, v$sess_io and the views starting with v$sql. Also worth mentioning is Tanel Poder's site, which contains some very useful scripts for diagnosing performance problems this way: http://tech.e2sn.com/.
Regards,
Rob.

Similar Messages

Can I read the dd file without the device

Hello,
Is it possible to read the DD file in Configurator 3.1 without connecting to the device?
The short version of the story...... I have only used the configurator a few times and was walked through the process. Now I need to figure out how to control a positioner (DVC6000f), I just need to stroke a valve open, closed and position it somewhere between the two. I am not able to connect to a positioner right now, so I would like to load the DD file into the configurator and look around to see if I can figure out how to give it a position command signal. Once I am able to stroke the valve I will need to write a simple LabView program to make it easier than the configurator program.
What is the best way to figure out which block I need to position the valve? I am hoping when I actually connect to the positioner it will be obvious, but life is usually not that easy.
Bryan

Hello Josiane,
Thank you for the information, I was able to load the DD and look around the configuration blocks. Initially engineering only asked about simple control of the valve, today things have changed. I found out that there are to be many tests performed on the valve including sine wave response, step testing, Hysterisis, linearity, dead band, and some others.
So my question now is how well can I control the positioner by writing a Vi in LabView? I can perform the above tests on a positioner with a 4-20mA output signal from my DAQ. Would it be possible to write the 4-20mA output signal into an input block (instead of an analog output channel) and control the valve in real time? I could just change the mA signal into whatever units the positioner wants. Or what would be the best approach to control the valve for testing?
Is there a number I can reach for support? It might be easier than email.
Bryan

How can a make avi files without the length changing?

I'm hoping someone can help me with this. I'm posting it first here, as the process also involves FinalCut. If there's a better place to get an answer, maybe someone could streer me in that direction.
I'm doing some subtling which will then be coded onto professional tapes using FCP. I don't have the equipment (digibeta machines) to do that process at my end, so I'm sending the files to a studio and they're going to do the rest for me.
I have software that'll let me lay down subtitles and then export files with time code, but the software previews with avi files. After messages from the studio telling me that the subtitles were falling out of sync, I finally realized that the avi files I had made from the 30 minute DVD screeners were 4 seconds shorter in length than the material on the screener. I made more and more avi files to double check, each one came out 4 seconds shorter than it should have been. So that's my problem.
Does anyone know of a way to convert DVD (or VOB) files to avi without losing any time? Alternatively, does anyone know of a program for subtitling that works straight from DVDs? (I looked into Belle Nuit Subtitler, but it's impossible to tell how it works without paying for it and waiting three or four days for the order to manually process.)
Thanks for any help and sorry my question is so convoluted.

The best solution to my particular problem seemed to be putting the avi file on the timeline in FCP, selecting it, the choosing "Duration" from the "Modify" menu and resizing it to the length it should have been.
I'm actually getting a friend to adjust most of the files in Premiere with his PC as I'm still on a G4 PowerBook and the rendering time for the avi files before I can manipulate them was half a day each. (Premiere has a similar feature.)
Thanks again to Andy for the MPEG Streamclip tip...it looks like it'll be useful in the future, and it's free! Cinematize also looked like it could have helped, but the demo mode only let me test 10 second exports at a time and that wasn't really enough for me to tell if the length changed or not. Didn't buy it this time around.
I also get the point that there must be a lot of people who use the term "urgent" to mean "hurry up and help me, I don't have time to read" with prolific good Samaratians no doubt tired of being bossed around in that way.
Fair enough.
Anyway, the "Duration" option within FCP is one way to fix DVD burns and other format conversions that come out with different time spreads from the original. Rendering can take time on slower Macs though.

How do I generate the pdf file using the name of a field. How can I help

how do I generate the pdf file using the name of a field. How can I help

Hi,
here's a sample.
LiveCycle Blog: Formulare in bestimmte Verzeichnisse speichern und nach Inhalt aus Formularfeld benennen //Save forms to…

I was lately downlaoding a 700mb file, but i lost the internet connection and i have the .part file and i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the begining?

I was lately downlaoding a 700mb file, but i lost the internet connection and only 635mb was downloaded and i have the .part file but the download menu says that download failed so i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the beginning?

I do not know if your file can be recovered. But I may be able help you to recreate it with ease. If you will settle for a composite where all image are re-sized for a particular tile size and virtually cropped to its aspect ratio. However all source image need be gathered into a folder to use my script process. Paste Image Roll Script and Picture Package Support Link http://www.mouseprints.net/old/dpr/PasteImageRoll.jsx

I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again

I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again it says that the "Object Already Exists." It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.

cactisken
You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
Can you still use 12/12.1 on this same computer that will not let you use 13?
What specific Window operating system are you using?
Let us go through the usual drill...
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device instead of a mouse?
3. Did you install the program with antivirus and firewall(s) disabled?
4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
from SLCache to SLCacheOLD.
5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
computer as Premiere Elements 13?
Let us start here and then decide what next.
Thank you.
ATR

How can I save a file in the server?

Hello,
I am writing a Java Web Start program that it will generate a html file, how can I save the generated file in the server, fro example, the directory where I stored my JAR files. Because right now, it will create the html file in the local client mahcine instead of the server. Can anyone tell me how can I do this? Thanks you.

Yeah, thanks but that's not what I was trying to ask.
I know that you can save and open a document by performing these three steps:
1. Confirming to save a file to the Downloads folder
2. Open the download manager by clicking the temporarily green arrow
3. Clicking on the downloaded file
What I would like to know is whether or not it is possible to have Firefox open a saved file ''automatically''. At the moment, if I choose to open it automatically, it is only saved to my temp folder.
It would be great though if it was saved to my Downloads folder ''and'' opened with the respective program on my pc. Is there a way to do this?

How can I attach an image without the image is in the email body? (using the new mail the Lion)

How can I attach an image without the image is in the email body? (using the new mail the Lion)
I want in attachment, not in the body mail.

I think your only solution is to zip the image files first and then attach them.
Read this from a site I found:
Sending Graphical Attachments -- When you attach a graphical image to your message, the recipient of your message sees the image inline (that is, in the body of the message) if her email client supports inline display. ("Take Control of Email with Apple Mail" contains a table listing the capabilities of popular Mac and PC email clients.) If a client does not support inline display (or the recipient has turned off the inline display option), the file appears as an attachment that must be opened in a separate program.
On the one hand, an inline image is easier for the recipient to see - all she has to do is look at it. On the other hand, inline images can be frustrating to scroll through. If you do not wish to send a graphical image inline, you must compress the file before attaching it - Mail, sadly, lacks a built-in compression option, though fortunately for Panther users, the Finder offers Zip compression without requiring a separate application.
Note that when you compose a new message, Mail always shows attachments in the body of your message. You can manually drag them somewhere else, but many email clients display all attachments in a separate list, regardless of where you place them in the message body.
If you paste an image into a message or drag & drop an image from another window (say, a Web browser), Mail converts the raw image data to an attachment in TIFF format. On the other hand, if you drag & drop the icon of an image file (or use the Attach button to locate the file using the file browser), Mail leaves the attached image in its original format. This difference is significant, because although most email clients can display JPEG images just fine, support for TIFF - especially in non-Mac email clients - is less common. If possible, I suggest attaching image files as opposed to pasting or dragging in raw image data.

Is possible see a pdf file without the buttons of the program adobe? don´t permit a copy of the file

Is possible see a pdf file without the buttons of the program adobe? don´t permit a copy of the file

For the hiding, go to the document properties under initial view. You may confuse some folks if there is no file menu to close the file (a lot of folks just can't get the keyboard shortcut, alt-F4, into their head. They are going to look for where to find the file menu to close.

How to automatically generate a build file of the application from command-line

Hi All
How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?
Thanks

User, which jdev version do you use?
I don't think you can do this. You can only create an ant build.xml from the project inside jdev.
You can use ojdeploy to build the project. This is the only method which will also make the necessary changes to the descriptors.
Timo

Is there a keyboard shortcut to delete files without the need to use the mouse? In OS X Mavericks.

Is there a keyboard shortcut to delete files without the need to use the mouse in OS X Mavericks?

my question is precise
Not exactly........
Cmd-Delete deletes a selected file without a mouse.
What you want, I think, is a way to select the file (presumably in Finder) without a mouse so that it can be deleted.
If you open a new Finder window - Cmd-N you can navigate with the up/down arrow keys as you navigate a file is selected , once selected it can be deleted with cmd-delete.
If while navigateing with the up/dpwn arrow keys you encounter a folder you can delete the folder with cmd-delete or open the folder with the right arrow and proceed to naviagte and delete.

How to get the update file without using Nokia Sof...

The network connection is unreliable and downloading the firmware update using PC Suite for my Nokia E90 proves difficult. Does anyone know how I can get the firmware version 300.34.84?
The trouble is Nokia's Software Updater does not accommodate any slight interruption to the connection during the update process. I will update this discussion with what version of PC Suite I have once I get that info.
Any help is kindly appreciated

In fact, it is not Possible to get the update file without using Nokia Software Updater or you should search the net to find the update files in another place and even you get them, you can not use them with NSU.
You can Update your Device with:
1 - NSU (Nokia Software Update)
2 - FOTA (Firmware Over The Air) for FP2 devices ONLY.
3 - Nokia Care Center
there is not other way to upgrade.
Hope useful for u.
regards
Nokia N79 4GB
SW Version: 32.001 RM-348 MEA

How can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

How can I use Office Update without the Office CD?

How can I use Office Update without the Office CD? On the microsoft website I've clicked the options which mean I shouldn't need the CD (which wasn't supplied with the laptop), but poartway through updating the service pack I get a request for the Office 2000 Professional CD.
Any suggestions?

Hi
Did you mean a Office or One Note?
As far as I know the One Note is a part of the Recovering Image and the CD is not delivered with the unit. Furthermore the Toshiba units are not delivered with the Office 2000 software.
Nevertheless, did you check the update function in the Help i.e. in Word?
There you will find a options called Check for Updates
http://office.microsoft.com/en-us/officeupdate/default.aspx
Bye

Can generate the TKPROF file without the SQL is not running completed ?

Similar Messages

Maybe you are looking for