Can' get Output in CC Bridge to work

Following the instructions for installing the Output Module for CC Bridge I can't get it to work.
Initially was greeted with the notification that the output module has been installed, but there was not Output Button.
Fiddling around, I could get the Output Button to show, but clicking on it would do nothing.
Un- installing, re-installing, re-setting bridge several times did not get me anywhere.
The installation shows up like this:
Any idea about what I am doing wrong?

Thanks,
reading some of the discussions on this as you suggested, made me think about coping files from CS6 over to CC.
What I found out was, that for one reason or an other, in CC Bridge there was no Workspace Folder. Once I copied that folder from CS6 to CC, everything works.

Similar Messages

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELP

I would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.

Hi Guys does anyone know of a way i can get cyclops speed camera alert to work through bluetooth incar hands free kit , i used to be able to connect it via an app called drivesafely but this app is no longer available in apple store ????????????

Hi Guys does anyone know of a way i can get cyclops speed camera alert to work through bluetooth incar hands free kit , i used to be able to connect it via an app called drivesafely but this app is no longer available in apple store ????????????

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

Is there any way I can get a past copy of a work plan without performing restoration.

Is there any way I can get a past copy of a work plan without performing restoration. I do not want to perform restoration because if I do so the current version of
the plan will get over ridden. I think if I publish the current version of the plan with a different name and then perform restoration it will not override the current version of the plan.

Jurassic Park --
I do not understand what you are trying to accomplish. Are you trying to create a duplicate of the current enterprise project, but with a different name? If so, there is one pretty simple way to do this. Open the enterprise project and
click File > Save As. In the Save to Project Server dialog, click the Type pick list and select Template. Edit the name for this temporary enterprise template so that it is different from the project name, and then click the Save button.
In the Save as Template dialog, do not select any of the checkboxes and then click the Save button. When the system finishes saving the project as a template, close the project. Now click File > New > Project Server Template. Select
the template you just saved and then click the OK button. You now have an exact copy of your project, ready for you to save and publish. Hope this helps.
Dale A. Howard [MVP]

HT1695 New iPhone 5 -only able to get wifi when sitting next to router. My old 3GS with iOS 5.1 works fine all over house. Any ideas on how I can get my new iPhone 5 to work as well as old 3GS?

I just got my new iPhone 5 yesterday. I'm having difficulty maintaining a wifi connection. I can get reception when I'm sitting next to router but I get a short distance away and I get the message 'unable to connect to network'. My old iPhone 3GS works fine at same places where new iPhone 5 won't connect. I still am using ios 5.1 on 3GS. I've turned off my old phone to make sure it isn't causing some type of interference and also switched off the cellular network to try to force it into wifi mode but without any success. I don't think it's my router since my old 3GS is working fine. Anybody have any further thoughts? Thanks

There are some low-profile slots though 1 of them are occupied by the firewire card: 1 low-profile PCI, 2 low-profile PCI Express x16, 1 low-profile PCI Express x1
We actually purchased 13 of these computers for video editing, so I really hope it is possible to fix this without buying 13 low-profile graphics adapters. What gets to me is the fact that it does work when I disable the driver. (!) Shold therefore be doable to make a driver/update that works :-(
Any ideas? Or, in worst case, anyone know about a low-profile graphics card that works?
Thanks,
Steffen

How do i get output module on bridge

so I need to make a contact sheet .. and i have very specific criterias that Photoshop Contact 2 can't do .. but I dont have the output module on my adobe bridge and i can't seem to properly download it

Could this help?
Install Adobe Output Module

My Location Service is turned on, but I still can get the "Find my iPhone" to work

I can find my iMac and my Mac Book Pro, but my computers can't find my iPhone. It keeps telling me my iPhone is Offline when it's not. It tells me to turn on my "Location Services". It was always turned on. I followed an online suggestion to turn off "Location Services" and then turn it back on. I did that. It still didn't work. I even turned the phone off and waited about 10 minutes and then turned it back on and I still can't get it to locate my iPhone. I really need this as I am always misplacing my phone and leaving it somewhere. ;-) Thanks.

Again, nothing posted by PCMACK is correct.
The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, all a thief or whoever finds it has to do is force the phone into recovery mode & restore it. While this deletes all data on the phone, it also removes the passcode so the phone can then be used as a phone or touch.

Trouble getting Dlink DWL-G820 wireless bridge to work with wrt610n

I'm trying to get some dlink wireless bridges to work with wrt610n, but not having any luck. I left Wrt610n router with default "192.168.1.1" IP address and configured bridges accordingly with "192.168.1.xxx" adresses.
Wireless bridges not happy. Any ideas ? The bridges were working fine when i was using "192.168.0.xxx" ip addresses with wrt610n
Solved!
Go to Solution.

Well I'll give you full points for reading my question, but zero points for quality of answer. If it was that simple I would have done it.
Unfortunately circumstances have changed and I have both a 192.168.0.xxx LAN & 192.168.1.xxx LAN now and the DWL-G820 (Dlink) wireless bridges must be part of the 192.168.1.xxx LAN (WRT610N Linksys router). For some reason they won't work when I configure them to be part of a 192.168.1.xxx LAN.
I'm beginning to think it's a diabolical plot by either Linksys or Dlink to prevent each other's equipment from working together.

Issue in getting output through concurrent program

Hi,
I have developed a procedure and registered in APPS and passing 2 parameters.
while running the concurrent program i have entered values for 2 parameters and submitted.. but it is going as null (log file) and i am not getting output.
This procedure is working fine in Back End.
Please help me to fix it.
What could be the issue...
Thanks
Winsky.

Hi,
stored procedures MUST be coded with errbuf and retcode OUT parameters
which MUST be defined as first parameters of your procedure if you want to
use the procedure as concurrent request.
errbuf parameter comes first, retcode comes second, then the rest of your
parameters.
Populate retcode with 0 if logic within your procedure completes successful,
use 2 if the program ran into an exception (either a logic exception or when
an unexpected error should occurr) and use 1 for retcode, if your logic
should indicate a warning such as "no data found for processing" or something
like this.
When defining concurrent program in sysadmin responsibility do NOT define
parameters for errbuf and retcode, only for the rest of your parameters.
That's all - in short.
Regards

Anywhere know where i can get windows 7 for bootcamp for cheap

i want to game. know where i can get windows 7 for cheap

Some games work fine in Virtualbox, which itself would save money since there is less risk of losing data than installing Boot Camp. Regardless before you install anything backing up is essential. Many games are available for the Mac through CrossOver which itself is cheaper than a fully licensed Windows. See my FAQ * http://www.macmaps.com/macgamepages.html
Lastly, what country are you from? The cost of Windows varies worldwide.

I can't get my Dazzle Hollywood Bridge to output timeline to TV monitor

Pretty much as the title says.
All I get on screen are variations on a black & white picture from a normal solid picture to various moving stripes & checkerboards, all in black & white.
I did get it to work very briefly for about ten minutes the other day & I had a moving colour picture but then I changed a setting & it's gone back to being as mentioned above.
Does anyone have any ideas?
I gather that Dazzle don't have a great reputation.

Thanks for that.
I've managed to get my Dazzle bridge to display to the TV but it still seems very flaky.
Basically, I switched my video out put to "non-controllable device" & suddenly, up came colour on the TV! Woo-hoo!!
Then, my e-mail went ping so I switched apps to check my messages & when I went back it was a black & white checkerboard again! D'oh!!
So I fiddled around with plugs & settings a bit & suddenly, when I went on to "basic firewire" up came colour again! Woo-hoo!!
This happened several times & there doesn't - in my case at least - seem to be a setting that's the "right" one, just that forcing the bridge to do something different seems to kick it in to action.
A pain in the posterior, to be sure, but at least I'm able to get some work done now.
Just to confirm, I'm sending all frames, mirror on desktop is on, refreshing the AV has no effect (by which I mean that's not the thing that's making it work again each time) & I have the external hard drive connected to the Firewire 800 output, the Dazzle bridge connected to the Firewire 400 output & a single yellow (is that composite?) connector going to my TV with audio set to default so that it comes out of the laptop speakers.

I STILL can't get Bridge to work, Help

I have had Photoshop CS2 installed and activated for months. However, I have never gotten Bridge to work.
I get the apparently common, "Adobe Bridge cannot be used at this time because of licensing restrictions. You must have installed and launched at least one other Adobe application to use Adobe Bridge." I have consulted TechNote 331871, and have tried its suggestions. Solution 1, Photoshop CS2 IS activated. Solution 2, everything IS in its default location. Solution 3, removing and reinstalling Bridge doesn't help. Solution 5, I have removed and reinstalled Photoshop CS2 twice. (I have not removed the activation)
Which leaves Solution 4. Whenever I try to rerun the Common File Installer, I get "Setup has detected that a newer version of this product is already installed. Setup will now terminate.", and it does.
I have had uninstalled Adobe Premiere Elements 4, thinking that might be the problem. I also have Elements 3.0 and 6.0 installed. I have tried uninstalling 6.0 to no avail.
Anyone have any idea what may be going on, and what I might do next?

Have you seen the topic about 2/3 down this page "Premiere Elements has broken Bridge"? May provide some clues.

I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?

I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

How we can get the output in excel format for Spawned programs?

My requirement is to get the excel output for some of the programs (like -Adjustment Register, Applied Receipts Register). I am trying to achieve this by BI Publisher. But these programs has "Spawned" executable. And when I am changing the output type as"XML" I am getting below error in output-
"XML Parsing Error: syntax error"
Can anyne suggest how we can get an XML output and then excel output for Spawned programs?
Thanks in advance,

Hi,
If I get it right, you want to convert RXi (Reports Exchange) reports such as Adjustment Register & Applied Receipts Register into XML Publisher. Normally, you need to change the "Output Format" of the program called by the "Spawned" program to 'XML' -- not the "Spawned" program itself.
However, I believe RXi reports does not support XML output (atleast in 11i). It could only work on Text & Html format. Check on the metalink note below:
432719.1 - RXi-Only Reports Generate XML Format Exception With No Output Setting the Output Format to XML
Hope this helps.
regards,..
Rownald

How do I get the Bridge to work on my 9300?

I have been trying since April 2011 to get the BlackBerry Bridge to work on my Curve 9300. I'm using OS 6. I've spent hours and days on the phone with bewildered but friendly phone support agents.
It's been working twice after a security wipe and both times it turned itself off once I pair any other bluetooth device to the phone includoing the BlackBerry Visor Mount. Removing the paired device from the phone does not allow the Bridge to work. It seems to konk out after any change to the phone.
Is it really a choice between hands free in the car and bridging to my Playbook?
I'm hoping for some new insight since it's been almost a year. I love my phone and tablet but if I can't get this to work by April I have to look at other phone/tablet combos and it sucks since I invested in RIM with hope.
Nothing is wrong with the Playbook. This is a phone issue.
"Failed to turn off MAP Services. Blackberry Bridge cannot start. Turn off unused Serial Port profiles under Bluetooth > Options and try again."
Yes I've turned them all off except Data Transfer, and have also tried it with them all off. It has no effect. I've uninstalled, battery-pulled, reinstalled, no effect. I've downloaded the bridge from rroyy.com and no change.
Anything new?

Push it all the way in.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/e6edb2b15cb9b3456f 6d446386421777.jpg

Can' get Output in CC Bridge to work

Similar Messages

Maybe you are looking for