Can GR date earlier than GI date?

Hi,
Good morning! I have a inquiry want to ask all the MM expert.
I have a Good Issues date is on 22 May, but the Good Receive date is on 1st May.
Is this flow acceptable?
Good receive come before good issues sound not logical right ? But my user able to do that, when I try to reverse back the GR with wrong date, it come out this warning "document flow for delivey cannot be updated.."
Is that my logic was wrong? Please guide.
Thank you very much.
Warm regards,
PC

Hello Peai ,
The will accept the posting dates which may sound illogical .. eg GI date is earlier that GR date for a procured material .
The system has the following logic :-
If there is sufficient stock coverage at the time ( system time ) of  posting the document , the system will allow the posting in any date withing the same period . However if the period changes ( i.e , posting date is in the previous period ) then the system throws an error.
Eg .
GR thro Po done on 22nd May
GI for the same done on 1st May
Logically speaking ... the GI date cannot be earlier than the GR date , but the system allows this as these are in the same period .
Regards
Anis

Similar Messages

  • Can't get access in Time Machine to certain folders for any date earlier than current date/time.

    Can't get access in Time Machine to certain folders for any date earlier than current date/time, even when entering as Admin. Why do certain folders have small red "-" badge in lower right corner of folder icon?  Here's a picture of the dilemma:
    I've tried monkeying with priveleges using Command I, and changing users, but to no avail.  Can anyone help?

    Right.  Here's what the permissions look like from the Finder Command I:
    I'm not sure what "Custom" means, but when I then try to change it to "Read & Write", it doesn't take.... just comes back as Custom. Interesting to note that not only am I logged into Joan's account where the data folder and file lives) to do this, but when I do it from my own account  as Admin (dunc...mpster) I get the same result.

  • Error In Backdated Reservation Creation  Base date earlier than current dat

    Dear Experts,
    Error while creating Reservation for back date.
    Base date earlier than Current date.
    Can we create backdated reservation ? and post goods issue to the same ?
    if it need configuration please explain the steps for allowing creation of backdated reservations.
    Thanks in Advance

    What is the error message nos.?

  • Posting not possible (Value date earlier than capitalization date)

    Hello , we are getting the error shown below. I'am not sure where to go to fix this can any offer any advice.
    Thank you
    Posting not possible (Value date earlier than capitalization date)
    Message no. AA 322
    Diagnosis
    Asset 000000040048 0000 was first capitalized on 20080831.
    You cannot post to an asset that was not yet capitalized.
    Procedure
    You have the following options:
    Change the asset value date of your posting.
    Capitalize the asset by posting an acquisition.

    Generally this message will come , if you have created a asset  with a capitalization date say   31/08/2008 and you are settling a Internal order for last period say 07 on with a posting date earlier than capitalization date , say 15/08/2008.
    The System will not allow you to post because the value date cannot be earlier than capitalization date.
    Change the value date to later than capitalization date and post.

  • Invoice date earlier than GR date

    Hi Friends,
    We have GR based IV activated in our system.
    This helps us in preventing Invoice posting before GR.
    However currently the system is allowing me to post the invoice with the posting date earlier thatn the GR posting date.
    Can anyone please let me know if there is a way to stop it.
    Thanks,
    NItish

    Hi,
    Please check the below link...
    GR/IR posting date
    Hope it may helps you.
    Kuber

  • Asset Acquisition with Asset Value Date earlier than GI post.date

    Dear all,
    I am curently using SAP ECC 6.0. We are not creating AuC assets but directly capitalizing assets from investment accounts.
    If a material is issued with a date in March and i try to acquire it with asset value date from a previous period, for example in February, the system doesnt issue any message and lets me post the transaction. The accountants claim that this hadnt been possible in the earlier version of SAP 4.6 that we had been using and that the system had issued an error message - "Posting not possible (Value date earlier than capitalization date)"
    The accounting logic is that you cant capitalize an asset with a date earlier than the date when it has been in use, i.e. in our case it`s the date the material has been issued from the warehouse.
    Does someone know what logic does SAP follow in this case - and if i can set a validation control that will check and compare the two dates?
    Any opinion would be appreciated
    KR
    Severina Koleva

    We are on ECC 5.0 and we do get that message, but it is a warning.
    AA348...
    that said, you can setup a validation using GGB0 and asset accounting

  • Document date is earlier than acquisition date for asset

    Client has an asset which they want to post an acquistion for as of 1/1/2011. They are in December of 2011. They first put an acquisition in with 12/31/2011 and then cancelled it, realizing they needed a docdate of 1/1/2011. When they try to redo the acquisition with a docdate of 1/1/2011 they get the error "Document date is earlier than acquisition date for asset xxxxx"
    The capitalization date on the asset is 1/1/2011. I looked at the acquisition date (thorugh SQL) and it is "1899-12-30 00:00:00.000"
    Does anyone know why it is preventing from posting?
    (Posting dates allowed are 1/1/11-12/31/11 for period 12 of 2011 and the period is unlocked)
    Alan

    Hi
    I do believe that the problem is in the capitalization date 12/31/2011
    Even if you have cancellled the first acqusition , and the acquisition date has taken the dummy date that assets have when there are no acqusitions 1899-12-30 00:00:00.000
    Still the capitalization date remains 12/31/2011
    and this will deter any transactions earlier than 12/31/2011
    My question is,
    can you still edit the field capitalization date?
    Jose Antonio Castillo

  • Error for Project finish date earlier than forecast finish date

    Hi Experts
    I have the dates in Project definition as follows:
    Forecast start (PROJ-SPROG):  31.01.2011
    Forecast finish (PROJ-EPROG): 31.03.2011
    If i enter date 30.03.2011 as Finish date (PROJ-PLSEZ), below error message appears: "Finish date is earlier than start date. CJ563"
    The date i have entered is later than PROJ-SPROG, still not accepting.
    It accepts entry of date beyond the date in field PROJ-EPROG.
    Can anybody share thoughts on this?
    Warm regards
    ramSiva

    Can you kindly verify the other sets of dates being maintained in your activity (i.e. earliest & latest)? Are you using default configurations for PS i.e. confirmation dates are checked against basic dates and not forecast dates?
    Regards,
    Syed Ammar Zaheer

  • The Basic Finish date is a Day earlier than Planned date

    Dear Experts,
    I am getting a strange behaviour about Maintenance order Basic Finish Date when generated from Maintenance Plan. I have Customizing settings (TCode : OPU7) Adjust: "Adjust Basic dates, adjust dep reqmts to order start date" and scheduling type : Backwards in Time. For this setting Order Basic Finish Date is a day earlier than Planned date , but when Schduling type is Backwards instead of Backwards in Time, Basic Finish date is same as Planned date.
    Example: The start of cycle of a monthly plan is 14-Nov-2010, 1st Planned date is 14-Dec-2010. When Scheduling type is " Backwards in time" , the order generated is having Basic Finish Date as 13-Dec-2010 .And when Scheduling type is "Backwards" , Basic finish date is 14-Dec-2010.
    Thank you.
    -Malay-

    Hi there,
    Please check the primilinairy buffer in your strategy package. This field have an effect on your order start date.
    But I agree on Pete, you should use a forward planning.
    Regards,
    Johan
    Edited by: Johan Zeeman on Dec 17, 2010 11:29 AM

  • Posting date/period 31.12.2014/009 is earlier than existing date/period 17.01.2015/010

    Hi Experts
    While posting of invoice document (T.Code MIRO) I got the below error message;
    Posting date/period 31.12.2014/009 is earlier than existing date/period 17.01.2015/010
    Message no. FI_E050
    Diagnosis
    Commitment postings to Funds Management require that the current transaction's posting date is earlier than the posting date of the original or change account assignment line item of the document.
    I have checked several threads still i am not able to get answer -Invoice posting Error
    Regards
    Sp

    Suraj,
    please check following note
    564439 - FM update date is earlier than an existing postings
    Regards

  • Can i upload  first  Transaction data rather than master data what will hap

    hai,
    can i upload  first  Transaction data rather than master data what happends going in bw regarding performance issues like indexes
    let me know
    regards,
    murali

    Hi Murali,
    you can load the transaction data before master data. The main impact will be, that the system has to generate sid's and has to populate the sid-table of the master data objects while loading the data to a data target (cube or ods that is activated for bex reporting). This basically means that your data loads will take some more time. Additionally, if you need the master data attributes somewhere in your update or transfer rules, you will not get the correct information.
    So basically it is always a good approach to load and activate the master data before loading the transactional data. But anyway, specially in the development environment I usually don't load all the necessary master data.
    regards
    Siggi
    PS: navigational attributes of the data targets will not be available until you loaded the master data and scheduled the attribute and hierarchy change run.
    Message was edited by: Siegfried Szameitat

  • Can LSMW upload data other than Master Data

    Dear Friends,
    Can LSMW upload data other than Master Data, e.g. Want to upload the Vendor Invoice line items with single Debit and multiple Credit line items are there and also more than one GL a/c are involved.
    Thanks in advance.
    Regards,
    Mahendra Dev

    The answer is YES.
    There is no issue issue if you have different GL account.
    The issue is if you have multiple line item (which are differeing in each entry).
    For this, if you want to use LSMW, check for program, but not the recording method option.
    Regards,
    Ravi

  • SRM: SC 1000017291 (PO 9000003133): FI 099 booking date older than due date

    In SRM-Monitor as well as in RZ20 i got the message:
    >>Shopping cart 1000017291 (PO 9000003133): FI 099 Buchungsdatum älter als Fälligkeitsdatum<<
    no further description. Did you have experience with such message? Can any help.
    Thanks, Isam

    Hi Isam,
    if you convert from german to Buchungsdatum älter als Fälligkeitsdatum english the meansing is Posting date earlier than the due date. It means that your posting date is before the due date. I think it's warning only......
    Thanks
    Ravi

  • Early schedule start date, early schedule finish date

    I want early schedule start date, early schedule finish date and project cost plan in my report. This is a PS requirement. In the standard cube (0PS_C02) I can find actual start date and actual finish date. Has anybody used early schedule start date and early schedule finish date in the reports? If yes then did you get it using standard cube/ODS or you went for enhancement?

    HI,
    He have to go for few tables in which u can find all the data.
    Firstly u have to enhance the datasource .
    First go to table AFKO here you insert  AFUNR (Order Number) this table you will get AUFPL .
    Then take AUFLP and go to AFVV table and insert AFUPL . you will get all the activites and all dates of each activity  for example early start date ,early finish date, foirecost date etc.
    Thanks and Regards
    Dinesh

  • When choosing date on a banking site a box appears telling me to use a to date greater than from date.

    I am trying to get a report from a bank site and a box pops up asking me to choose a to date greater than from date. I have the correct dates chosen. Is there a fix or away around this.

    Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
    *https://support.mozilla.com/kb/Secure+Connection+Failed

Maybe you are looking for