Can Grid Control on Windows monitor databases on UNIX?

If I install Grid Control on a Windows pc can I use it to monitor databases on UNIX?

There are two reasons I have to reboot the box.
1.You know, Windows always needs "update and reboot".
2.Sometimes I got the EM error message "Count of targets not uploading exceeded the critical threshold " from all hosts, but I am sure all hosts and agents were working normally.
After receiving errors, I found the grid control can't show the right chart on the performance tab.
Then I reboot the box and everything works fine again.

Similar Messages

Can GRID control on Windows watch DB on HPUX

Guru's,
I've got a stupid question.
Going to install the 10.2 GRID control on a Windows 2000 server. Will I be able to manage Oracle databases that reside on a HPUX server?
PS - I've decided to not install the GRID on my HPUX server, as per my earlier post.
Thanks everyone!

Sure, All you need is to install an Agent pointing to the OMS on windows Box
regards,
MettoMorPhisM

Can Grid control 11g monitor Oracle 9i database

Can Grid control 11g monitor Oracle 9i database? This is on Linux5.7
Thanks for the help
s.

Yes but Enterprise Manager 11.1 Grid Control requires the 11.1 Agent.
Then go to the Targets tab, then Databases. It should self-discover the 9i database.
Also see Advanced Uses of Oracle Enterprise Manager 11g
http://www.oracle.com/us/products/enterprise-manager/advanced-uses-em11g-wp-170683.pdf
>
Oracle Secure Backup protects not only Oracle Database 9i, 10g and 11g,
Grid Control supplies a common, standard interface to set up and manage Oracle Data Guard for Oracle Database 9i, 10g and 11g databases

How To Install/Configure OEM Grid Control On Windows

Hi,
I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
This .zip files has 3 more .zip files eg
File Size
3822442.zip 510 MB (535,208,588 bytes)
3731596.zip 275 KB (282,502 bytes)
3731593.zip 510 MB (535,047,905 bytes)
Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
Pls email me at [email protected]
Your help greatly appretiated.
Regards,

You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
cheers
Rob

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

How to install oracle10g grid control on windows

i want,
how to install oracle10g R3 grid control on windows
in my server ,i have 4 database ..oracle10g R2 ..is running...

http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

Installing Enterprise Manager 10g Grid Control Using an Existing Database

I want to install Enterprise Manager 10g Grid Control 10.2.0.3 using an existing database. This database is RAC 10.2.0.2. and I use it as Infrastructure Metadata Repository.
I is said in Oracle documentation that SYSMAN schema has to be dropped, thus Database console repository has to be dropped. As far as I understand after Grid Control installation I will not be able to use Database console for my RAC 10.2.0.2 Infrastructure Metadata Repository database. I will be able to use only Grid Control for this database.
Am I right? Could you give me any advice about Installing Enterprise Manager 10g Grid Control Using an Existing Database?
Thank you.

I am trying to install the OEM rel 2.0 on AIX 5L from the downloaded software zip files which are as below,
AIX_Grid_Control_full_10201_disk1.zip (656,766,406 bytes) (cksum - 2157028496)
AIX_Grid_Control_full_10201_disk2.zip (655,758,726 bytes) (cksum - 2350778444)
AIX_Grid_Control_full_10201_disk3.zip (641,760,716 bytes) (cksum - 2053607771)
AIX_Grid_Control_full_10201_disk4.zip (606,903,411 bytes) (cksum - 4162514797)
AIX_Grid_Control_full_10201_disk5.zip (576,555,758 bytes) (cksum - 3304661461)
AIX_Grid_Control_full_10201_disk6.zip (459,658,650 bytes) (cksum - 3120478203)
AIX_Grid_Control_full_10201_disk7.zip (311,903,435 bytes) (cksum - 2438252536)
AIX_Grid_Control_full_10201_disk8.zip (224,594,251 bytes) (cksum - 2618845234)
I am unable to locate the runInstaller in any of the disks 1- 8 ,can somebody help me on this. Thanks

Grid Control for windows

Hi Experts,
We're trying to download and install Oracle grid control for windows 64bit but we can't find any 64bit release!
Can we safely download and install Enterprise Manager 11g Grid Control Release (11.1.0.1.0) - Windows 32bit from http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html ? or should we be installing a different version??
Should Grid control be installed on the DB server in the 1st place or should it be installed on another server?
Current Oracle Software: 11.2.0.1 64bit.
Server OS: Windows 2008 Server 64bit.
Can you kindly let us know.
Thanks

We finally got our facts right..
The Grid Control Enterprise Manager comes only in 32 bits.. However the Grid Control agent that needs to be installed on the DB server comes in 32/64bits and is supported under different OS platforms.
Metalink (Doc ID 412431.1) shows the Oracle Enterprise Manager Grid Control Certification Checker/matrix that we found extremely useful.
Enterprise Manager Grid Control comes with the basic features and is free to use. Any extra features are considered addons and do need to be properly licensed.
Thanks

Can grid control monitor Databases on different operating systems?

I have a GC on LINUX REDHAT AS 3/4. Can I use that to monitor and administer Databases created on a SUN OS?. Can agents running on different OS talk to GC that is running on a different OS?.
If so, any limitations?. Pointers to a doc would be appreciated.
Thanks

Yes,

Can Grid Control 10gR2 create a standby database when primary db uses ASM?

Does anyone know if Grid Control 10gR2 will be able to create a standby database when the primary database uses ASM for data files, redo log files, and archive log files but the standby database will use mounted disks? If it can, would it matter that the primary db will be a RAC cluster and the standby will be a single instance db?

I appreciate your reply and hope you are correct. Have you had a look at the 10gR2 Grid Control to confirm this or are you only going on published statements? The reason I ask is because previous versions of Grid Control claimed to support ASM but they would only allow you to work with them AFTER you had created a standby database manually but you couldn't actually use Grid Control to create a standby database from a primary database that had its log files on ASM disks.

Grid Control on Windows 64bit

Hi all,
I very new on Grid Control because actual I only have one database to administrate so the Enterprise Manger is very fine.
But in the future this will be expanded to 4 or 5 databases on different machines so I think the Grid Control will "help" me... Or I'm wrong?
Now the thing is, that my company is using Windows 2003 R2 64bit as OS and the Databases will be 10.2.0.4 64bit.
So now I'm on the Oracle Grid Control page and see, that Grid Control is not available for Windows in 64bit.
So I think now, that I have to have an additional Windows 32bit Server for running Grid Control and the Agent’s as 64bit for Windows for the Databases.
Or does someone have a different idea??
Thanks for your help.
Br
Joerg

Hi,
thanks for your post.
I have checked it on MetaLink and as you can see on the screenshot Windows x64 is not certified.
So I think I have to run an additional Windows 2003 32bit.
How ever... thanks.
br
Joerg

Install 10.2 Grid Control on Windows 2003 Server - Always erorr on Agent

I have a Windows 2003 Server in a Domain and have tried to install several times OEM Grid Control 10g (B30800-01), but every time the last step (Agent Configuration Assistant) prints "Failed" on the OUI-Screen. I checked the log on the directory "cfgtoollogs\cfgfw", but for a beginner it is a little bit difficult to find the key for the error. Somoebody has a minute left to look at it, please? (It's only the last part of the file CfmLogger). Everything else worked fine for the Installation.
Thank's a lot.
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has successfully been performed
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=2 stepIndex=2 microStep=0
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = D:\OracleHomes\agent10g\jlib\srvm.jar;D:\OracleHomes\agent10g\jlib\srvmhas.jar;D:\OracleHomes\agent10g\oui\jlib\srvm.jar;D:\OracleHomes\agent10g\sysman\jlib\agentPlug.jar;D:\OracleHomes\agent10g\jlib\emConfigInstall.jar;D:\OracleHomes\agent10g\sysman\jlib\emagentSDK.jar
INFO: Error reading file D:\OracleHomes\db10g\sysman\config\emd.properties
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:AgentPortHandler for D:\OracleHomes\agent10g and hosts=ora1.ramseier.local returned Port to Use=3872
INFO: oracle.sysman.top.agent:Configuring the agent
INFO: oracle.sysman.top.agent:Performing free port detection on host=ora1.ramseier.local
INFO: oracle.sysman.top.agent:AgentPlugIn:perform: DiscoverTargets for racMode=false and request doDiscovery=true, chainedInstall=true,omsOnly=false, iasName=EnterpriseManager0.ora1.ramseier.local, CRShome=, dbName=emrep.ramseier.local, seedInstall=true, connectDescriptor=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ORA1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.ramseier.local)))
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Securing Agent with agentSecure=true for non RAC
INFO: oracle.sysman.top.agent:Securing the agent
INFO: oracle.sysman.top.agent:Securing the agent...
INFO: oracle.sysman.top.agent:Executing Command: cmd /c D:\OracleHomes\agent10g\bin\emctl.bat secure agent
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Configuring Agent...
INFO: oracle.sysman.top.agent:Performing targets discovery and agent configuration
INFO: oracle.sysman.top.agent:DiscoverTargets:constructor with params: eRoot=D:\OracleHomes\agent10g,hname=ora1.ramseier.local...
INFO: oracle.sysman.top.agent:configureAgent:discovery on non RAC:
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\host.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="host" NAME="ora1.ramseier.local" >
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outhost file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outhost to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracledb.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_database" NAME="emrep.ramseier.local" >
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
<Property NAME="MachineName" VALUE="ora1.ramseier.local" />
<Property NAME="Port" VALUE="1521" />
<Property NAME="SID" VALUE="EMREP"/>
<Property NAME="ServiceName" VALUE="emrep.ramseier.local"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_ora1.ramseier.local" >
<Property NAME="ListenerOraDir" VALUE="D:\OracleHomes\db10g\network\admin" />
<Property NAME="LsnrName" VALUE="LISTENER" />
<Property NAME="Machine" VALUE="ora1.ramseier.local" />
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="Port" VALUE="1521" />
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outdb file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outdb to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:discoverTargets:executing addPwdinDBTarget for seedInstall=true
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\ocs_mailstore_discovery.pl D:\OracleHomes\agent10g ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outocs file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outocs to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_ias.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_home" DISPLAY_NAME="home" VERSION="1.3">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="9.0.4"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_apache" NAME="EnterpriseManager0.ora1.ramseier.local_HTTP Server" DISPLAY_NAME="HTTP_Server" VERSION="2.0">
<Property NAME="version" VALUE="10.1.2"/>
<Property NAME="HTTPPort" VALUE="80"/>
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_webcache" NAME="EnterpriseManager0.ora1.ramseier.local_Web Cache" DISPLAY_NAME="Web Cache">
<Property NAME="HTTPProtocol" VALUE="http"/>
<Property NAME="HTTPMachine" VALUE="localhost"/>
<Property NAME="HTTPMachineForAdmin" VALUE="ora1.ramseier.local"/>
<Property NAME="HTTPPath" VALUE="/"/>
<Property NAME="HTTPQuery" VALUE=""/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="MonitorPort" VALUE="9402"/>
<Property NAME="AdminPort" VALUE="9400"/>
<Property NAME="logFileName" VALUE="access_log"/>
<Property NAME="logFileDir" VALUE="D:\OracleHomes\oms10g\webcache\logs"/>
<Property NAME="version" VALUE="10.1.2.1.0"/>
<Property NAME="IASInternalName" VALUE="WebCache"/>
<Property NAME="authrealm" VALUE="Oracle Web Cache Administrator"/>
<Property NAME="authuser" VALUE="36cceb58627a6c450d87b23feaca4062" ENCRYPTED="TRUE"/>
<Property NAME="authpwd" VALUE="960c169811d6091c" ENCRYPTED="TRUE"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" ASSOCIATION="null"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" VERSION="1.0">
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="host" VALUE="ora1.ramseier.local"/>
<Property NAME="StandaloneConsoleURL" VALUE="http://ora1.ramseier.local:18100/emd/console"/>
<Property NAME="StatusURL" VALUE="http://ora1.ramseier.local:7778"/>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EM" DISPLAY_NAME="OC4J_EM">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV" DISPLAY_NAME="OC4J_EMPROV">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outias file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outias to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to iAS Homes
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to D:\OracleHomes\oms10g, VERSION=null
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgent:performing command=D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g, for emdRoot=D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
0 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local:18120 of type oracle_emd to D:\OracleHomes\agent10g
9243 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local of type host to D:\OracleHomes\agent10g
16504 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_home of type oc4j to D:\OracleHomes\agent10g
73786 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_HTTP Server of type oracle_apache to D:\OracleHomes\agent10g
183984 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_Web Cache of type oracle_webcache to D:\OracleHomes\agent10g
296266 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local of type oracle_ias to D:\OracleHomes\agent10g
419333 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EM of type oc4j to D:\OracleHomes\agent10g
535770 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV of type oc4j to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_apache.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.config).
log4j:ERROR Please initialize the log4j system properly.
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
     at java.lang.Runtime.loadLibrary0(Runtime.java:788)
     at java.lang.System.loadLibrary(System.java:834)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:940)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:42)
     at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:208)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:448)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:255)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:230)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:179)
     at oracle.sysman.emSDK.conf.InventoryLoader.initInventorySession(InventoryLoader.java:296)
     at oracle.sysman.emSDK.conf.InventoryLoader.getHomeLocations(InventoryLoader.java:328)
     at oracle.sysman.emSDK.conf.InventoryLoader.getAllHomeLocations(InventoryLoader.java:189)
     at oracle.sysman.emSDK.conf.InventoryLoader.main(InventoryLoader.java:454)
Exception in thread "main"
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outapache file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outapache to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\csa_collector.pl ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_csa_collector" NAME="ora1.ramseier.local_oms_csa_collector" DISPLAY_NAME="ora1.ramseier.local_oms_csa_collector">
<Property NAME="recvFileDir" VALUE="D:\OracleHomes\oms10g\oms_csa\results"/>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outcsa file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outcsa to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Doing Chronos Configurarion...
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 1
INFO: oracle.sysman.top.agent:STDERR=
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
The Oracleagent10gAgent service is not started.
More help is available by typing NET HELPMSG 3521.
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
STDOUT=
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Configuring webserver, document root D:\OracleHomes\oms10g/Apache/Apache/htdocs
Javascript and gif files copied in to document root directory.
Configuring webcache D:\OracleHomes\oms10g
Checking if opmn is up ...
D:\OracleHomes\oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.ora1.ramseier.local
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 3248 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 3312 | Alive
OC4J | OC4J_EM | 3228 | Alive
OC4J | OC4J_EMPROV | 3600 | Alive
WebCache | WebCache | 3316 | Alive
WebCache | WebCacheAdmin | 3252 | Alive
Restarting webcache...
D:\OracleHomes\oms10g/opmn/bin/opmnctl stopproc process-type=WebCache
opmnctl: stopping opmn managed processes...
D:\OracleHomes\oms10g/opmn/bin/opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
Adding collection for webcache target : EnterpriseManager0.ora1.ramseier.local_Web Cache
EnterpriseManager0.ora1.ramseier.local_Web Cache ::: EnterpriseManager0_ora1_ramseier_local_Web_Cache
Attempting to reload Agent.
D:\OracleHomes\agent10g/bin/emctl reload
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:51:35 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:39 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Website target creation script failed.
INFO: oracle.sysman.top.agent:Requested Operation D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl has failed to perform with Status = 1
INFO: oracle.sysman.top.agent:6
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2.0.2.0:common:family=CFM:oh=D:\OracleHomes\agent10g:label=0} failed with an unhandled exception:
java.lang.Exception: 6
     at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:248)
     at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:223)
     at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
     at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
     at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
     at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=D:\OracleHomes\oms10g:label=0}
INFO: Framework waiting for Action to complete at 20:53:43.068
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 20:53:43.068
INFO: Cfm.save() was called
INFO: Cfm.save(): 21 aggregate instances saved
Best Regards
Andy

sorry, but thats only the beginning of the torture....
i tried to update my gridcontrol installation to the actual version, .... many times with many retries but still havent a step by step resultion :-(
much thanks to vmware or ms hyper-v for snapshotfeatures

Enterprise manager Grid Control for Windows 64 bit

Hi,
I am looking for Enterprise Manager Grid Control 10.2.0.3 for Microsoft Windows Server 2003 R2 64 bit. On OTN and metalink I can only find for 32 bit. Can anyone suggest where I can find the same.
Thanks in Advance.
SK.

The OMS is on Win x86 and supports Agent on Win x64 target.

How to use OEM grid control to find any database not in archivelog mode?

Hello,
currently we have 130 databases, say, if I want to pick out any database currently NOT in archivelog mode, is there a quick way to find out ?
by using OEM grid control
or
some trick similar,
but really don't need to check each database manually.
thank you very much!

This query works in 12c - please run as SYSMAN.
It is based on undocumented assumptions though +( AND key_value = 'NOARCHIVELOG')+.
SELECT *
FROM SYSMAN.MGMT$GROUP_DERIVED_MEMBERSHIPS O ,
    SYSMAN.MGMT$TARGET T ,
    sysman.MGMT$AVAILABILITY_CURRENT st
WHERE
o.member_target_type     IN ('oracle_database', 'rac_database')
AND ( t.target_type           ='rac_database'
OR (t.target_type             ='oracle_database'
AND t.type_qualifier3        != 'RACINST'))
AND o. member_target_guid     = t.target_guid
AND t.target_guid             = st.target_guid
AND st.availability_status    = 'Target Up'
AND ( EXISTS
    (SELECT *
    FROM sysman.mgmt$metric_current i
    WHERE I.TARGET_GUID = O.MEMBER_TARGET_GUID
    AND metric_name     = 'archFull'
    AND Metric_Column   = 'archTotal'
    AND metric_label    = 'Archive Area'
    AND column_label    = 'Total Archive Area (KB)'
    AND key_value       = 'NOARCHIVELOG'
    ));Another way to achieve the goal is to push extended metrics (SELECT LOG_MODE FROM V$DATABASE) on each DB, and monitor the values they return to the repository. This is an example for a (slightly) different problem - http://iiotzov.wordpress.com/2012/08/08/how-to-use-the-new-oem-12c-metric-extensions-to-enforce-enterprise-wide-custom-policies .
OEM Repository has many other great uses as well - http://iiotzov.files.wordpress.com/2012/05/oem-repository-a-second-look.doc , http://iiotzov.files.wordpress.com/2011/08/iotzov_oem_repository.pdf
Iordan Iotzov
http://iiotzov.wordpress.com/

Save /ADD Grid Control Columns Data in database

Hello All,
Can any one suggest me how we add or save or update the grid control columns fields data into databases.
My problem is I have 2 tabs in user defined screen Main and issue tabs . when we click the issue tabs then items data in main tab matrix is filled in issue tab grid for this i create user defind table and register it with my user defined object .and
fill somoe of this table fields using reocord set . Now I want to add these grid data in database .
how we achieve this .Please guide me

Arvind,
You may want to review the documentation on the Grid Object in the SDK Help documentation as this may help with your question.
Eddy

Can Grid Control on Windows monitor databases on UNIX?

Similar Messages

Maybe you are looking for