Can guides be set precisely/numerically?

For example, I'd like to set guides at 20 cm, 35.2 cm, and 45.5 cm.
Can I do this numerically? It's not feeling too precise when just zooming/dragging, even with snapping... numeric positioning would make life a lot easier!
I'm in CS3.
Thanks,
Andrew

And one more thing -- if you want to set a guide at one of the indicated ruler divisions (for example, at 1/8, 1/4, etc. for inches), just double click the ruler at that point. It creates the guide for you. If you need a guide between two existing measurements, zoom in until another tick appears on the ruler between the two existing ticks and then doubleclick the new tick.

Similar Messages

  • Can SquirrelMail be set to serve on a port other than 16080? How?

    SquirrelMail serves OS X webmail on port 16080 out of the box. However, my company intranet has internet port 16080 closed... so, SquirrelMail is inaccessible. Can SM be set to serve on port 80? Is there a reason why it doesn't serve on this port by default? (I'm also running Tiger Server Apache web server on the same box; Rumpus FTP uses port 8000 for it's web serving.) Is SM a "web server" which would conflict with Apache on port 80.. is that the reason for port 16080? How can I change SM to serve on a port I can access from the office... like, say, 8010?

    I tried this setup, Jeff... gets me to the login page fine... but doesn't seem to recognize any of my email logins (all which are virtual).
    I have a website setup as MAIL.MYDOMAIN.COM... port 80...performance cache OFF... and pointing to /usr/share/squirrelmail. I tried these settings with OPTIONS-->WebMail both checked and unchecked. Doesn't seem to make any difference.
    So, does the problem have to do with the fact that I have Mailstore partitions setup by domain, as per Alex's guide to Making Virtual Users?
    As Alex mentioned, turn off the performance cache.
    You can change the port in ServerAdmin to something
    else (you mentioned 8010, which is fine).
    You may need to create a seperate Site for Webmail if
    you don't have one already.
    To take this a step further....
    My preferred (non-SSL) setup is this:
    - Assuming you already have DNS of mail.domain.com
    - Create a site for mail.domain.com (port 80)
    - In Sites/General, port 80
    - In Sites/General Web Folder
    "/usr/share/squirrelmail"
    - In Sites/Options, turn off Perf Cache.
    If you do the above, when you hit
    http://mail.domain.com
    You will go straight to Squirrelmail without having
    to add a /webmail to your url and without having to
    use a different port #.
    Jeff

  • How do I create an ACR custom lens profile if camera exposure can't be set to manual?

    How do I create an ACR custom lens profile if camera exposure can't be set to manual?
    I ask this question for the Nokia 808 PureView 41MP camera. It produces stunning image quality but exposure can only be controlled via EV +/- compensation. I need a lens profile to correct for vignetting to get even skies in panorama (which turn out stunningly otherwise). There is no profile for the Nokia 808 PureView I am aware of and I'd like to produce one.
    Is the Adobe profile creator able to correct for varying exposure using EXIF or overlapping parts of the chart or background?
    Or would the Adobe profile creator ignore EXIF if I use studio flash to enforce a constant lightning situation, even if shutter speed would vary (aperture is constant and ISO can be set constant, just not the shutter speed)?
    Or did Adobe produce a profile internally they can share?
    Thanks.

    If you read the first post, this is the camera-app of a 41MP Nokia Pureview 808 camera-phone, so maybe someone could write a new camera app but the phone is Symbian OS which is dead, making that unlikely.
    http://www.digitaltrends.com/mobile/the-skeptics-guide-to-nokias-808-pureview-five-reasons -41-megapixels-are-not-a-gimmick/
    http://www.digitaltrends.com/mobile/the-nokia-lumia-820-and-lumia-920-too-little-too-late/
    It would probably be easier for Adobe to rewrite the LPC to allow vignetting to be computed from a single shot of a blank wall without a target in the shot, than to have someone rewrite a camera app that allows manual exposure.
    Another idea about how to get the phone to keep a constant exposure would be to experiment with putting darker and lighter objects in the field-of-view away from the target area to make the camera metering adjust things so it’s exposure is the same from one shot to the next.  This would take some doing but should work, unless the LPC uses the part of the frame that doesn’t contain the checkboard target in its computations.
    You’re basically varying the scene around the target so the camera takes the same exposure of the target each time.

  • Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box  at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

    I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
    If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

    The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
    When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
    But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
    For the example, the values list for the pop-up menu was:
    5
    3
    1
    Choose
    -1
    -3
    -5
    The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
    For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
    Regards,
    Barry

  • Message no. 26269 : Status can only be set when all originals are stored

    Hi,
    While changing status in cv02n, i am getting the below message no-Message no. 26269 : Status can only be set when all originals are stored. I am not getting the message solution in google. please guide me how to come over from this message.
    Regards,
    Mastan.

    Collegues! Have you any idea?
    Found this - [recommendation|http://help.sap.com/saphelp_47x200/helpdata/en/0c/b98e3c90347b17e10000000a114084/content.htm] - how to, but there so simple scenario without details about standart functionality.
    Check In
    You can check in originals, which are saved in the local network, into a storage system. The following originals are indicated by the  icon:
    Originals that are to be checked in for the first time.
    Originals that have already been checked in, and loaded into the local network for changing.
    To do this start WebDocuments. Process the document info record in the change mode.
    Select the original in the Originals dataset.
    Choose Check In. The system determines the storage system based on the system settings, and checks in the original.
    You return to the data sheet. The original application file is indicated by the Checked In  icon.
    Save the document.
    Very simple, but not work, and no details. Castle icon are not locked. DELETE, CANCEL - work, but not CNANGE.
    Maybe my storage system cannot determine the storage system? If it is right, so where can i maintain this option?

  • Setting precision to primitive data types

    How can I set precisions to the primitive data types, viz, double and float??
    I'm writing a program in which I've declared a double variable as follows :
    double d=12.00
    System.out.println(d);
    The output is 12.0 but I want it to be 12.00
    How can it be done??

    You have to use a BigDecimal:
            BigDecimal bd = new BigDecimal(12);
            bd = bd.setScale(2, BigDecimal.ROUND_HALF_UP);
            System.out.println(bd);

  • Why can't I set month,date and time on my imessage?

    Why can't I set month, date and time on my imessage?

    The way the date/time was displayed was changed in iOS7. There had been numerous complaints about not having a date/time stamp on all posts, so it was changed to display the time for all by sliding the post to the left. They left the date stamp to show differently. I couldn't tell you what it does for posts more than a week old, as I never save my messages that long.
    Meg's post provides for software where you could move the SMS to the computer and it should contain a full date/time stamp on it.

  • Can an action set the dimension of the crop and put in the center of the image?

    Hi
    running cs6 64bit under w7 64bit
    can an action set the dimensions of the crop height & length and put the crop in the center of the image?
    or should i need a script?
    i mean for example i taken many photos about 20mp mega pixel
    i would like to run a script or an action that set the height & length and set the crop in the center of the image
    thanks

    mantralightroom wrote:
    i have cs6 but i haven't in the action option conditional actions
    ps i tried to record a script to set the histogram channel RGB or Luminocity , but the script plugin doesn't record it and even the action can do it
    you know cs6 starts with histogram in colors mode
    I have a hard time with English even though it may native language.  I'm having some problem with what you wrote.
    Yes cs6 does not have what Adobe calls conditional actions they put into CC.  That feature more or less an IF statement condition on some document attributes.  Like if document width is greater then document height play action landscape else play action portrait.   With CS6 you need to write one line script to use in actions.  Most of the utility scripts I wrote for use in actions are more complex then a simple if statement.
    The way you record scripts is PS is be using Adobe Scriptlistener Plug-in when installed the plug-in records everything you do that can be recorded into two log files one in JavaScript and the other in VBS.  The code generated  works by passing parameters to Adobe Photoshop's Action Manager.  To make scripts toy need to extract the steps you need from one of the log files.    However some thing you can do in Photoshop can not be recorded. And while your right that the scriptlistener plug-in  does not record anything for setting the histograms to RGB channel or Luminosity  channel your wrong when you write the Action Recorder can do it.
    However scripts can get the histograms channel data. I have never process a histogram in a script however there is a sample Photoshop Histogram in the Photoshop javascripting guide. That creates a text graph log.
    // Function to activate all the channels according to the documents mode
    // Takes a document reference for input
    function TurnOnDocumentHistogramChannels(inDocument) {
        // see how many channels we need to activate
        var visibleChannelCount = 0
        // based on the mode of the document
        switch (inDocument.mode) {
            case DocumentMode.BITMAP:
            case DocumentMode.GRAYSCALE:
            case DocumentMode.INDEXEDCOLOR:
                visibleChannelCount = 1
                break;     
            case DocumentMode.DUOTONE:
                visibleChannelCount = 2
                break;
            case DocumentMode.RGB:
            case DocumentMode.LAB:
                visibleChannelCount = 3
                break;
            case DocumentMode.CMYK:
                visibleChannelCount = 4
                break;
            case DocumentMode.MULTICHANNEL:
            default:
                visibleChannelCount = inDocument.channels.length + 1
                break;
        // now get the channels to activate into a local array
        var aChannelArray = new Array()
        // index for the active channels array
        var aChannelIndex = 0
        for(var channelIndex = 0; channelIndex < inDocument.channels.length;channelIndex++) {
            if (channelIndex < visibleChannelCount) { aChannelArray[aChannelIndex++] = inDocument.channels[channelIndex] }
        // now activate them
        inDocument.activeChannels = aChannelArray
    // Save the current preferences
    var startRulerUnits = app.preferences.rulerUnits
    var startTypeUnits = app.preferences.typeUnits
    var startDisplayDialogs = app.displayDialogs
    // Set Adobe Photoshop CC to use pixels and display no dialogs
    app.preferences.rulerUnits = Units.PIXELS
    app.preferences.typeUnits = TypeUnits.PIXELS
    app.displayDialogs = DialogModes.NO
    // if there are no documents open then try to open a sample file
    if (app.documents.length == 0) { open(File(app.path + "/Samples/Fish.psd")) }
    // get a reference to the working document
    var docRef = app.activeDocument
    // create the output file
    // first figure out which kind of line feeds we need
    if ($.os.search(/windows/i) != -1) {fileLineFeed = "Windows" }
    else { fileLineFeed = "Macintosh"}
    // create the output file accordingly
    fileOut = new File("~/Desktop/Histogram.log")
    fileOut.lineFeed = fileLineFeed
    fileOut.open("w", "TEXT", "????")
    // write out a header
    fileOut.write("Histogram report for " + docRef.name)
    // find out how many pixels I have
    var totalCount = docRef.width.value * docRef.height.value
    // more info to the out file
    fileOut.write(" with a total pixel count of " + totalCount + "\n")
    // channel indexer
    var channelIndex = 0
    // remember which channels are currently active
    var myActiveChannels = app.activeDocument.activeChannels
    // document histogram only works in these modes
    if (docRef.mode == DocumentMode.RGB ||docRef.mode == DocumentMode.INDEXEDCOLOR ||docRef.mode == DocumentMode.CMYK) {
        // activate the main channels so we can get the documents histogram
        TurnOnDocumentHistogramChannels(docRef)
        // Output the documents histogram
        OutputHistogram(docRef.histogram, "Luminosity", fileOut)
    // local reference to work from
    var myChannels = docRef.channels
    // loop through each channel and output the histogram
    for (var channelIndex = 0; channelIndex < myChannels.length; channelIndex++) {
        // the channel has to be visible to get a histogram
        myChannels[channelIndex].visible= true
        // turn off all the other channels
        for (var secondaryIndex = 0; secondaryIndex < myChannels.length;secondaryIndex++) {
            if (channelIndex != secondaryIndex) { myChannels[secondaryIndex].visible= false }
        // Use the function to dump the histogram
        OutputHistogram(myChannels[channelIndex].histogram,myChannels[channelIndex].name, fileOut)
    // close down the output file
    fileOut.close()
    alert("Histogram file saved to: " + fileOut.fsName)
    // reset the active channels
    docRef.activeChannels = myActiveChannels
    // Reset the application preferences
    app.preferences.rulerUnits = startRulerUnits
    app.preferences.typeUnits = startTypeUnits
    app.displayDialogs = startDisplayDialogs
    // Utility function that takes a histogram and name
    // and dumps to the output file
    function OutputHistogram(inHistogram, inHistogramName, inOutFile) {
        // find ouch which count has the largest number
        // I scale everything to this number for the output
        var largestCount = 0
        // a simple indexer I can reuse
        var histogramIndex = 0
        // see how many samples we have total
        var histogramCount = 0
        // search through all and find the largest single item
        for (histogramIndex = 0; histogramIndex < inHistogram.length;histogramIndex++) {
            histogramCount += inHistogram[histogramIndex]
            if (inHistogram[histogramIndex] > largestCount)
            largestCount = inHistogram[histogramIndex]
        // These should match
        if (histogramCount != totalCount) {
            alert("Something bad is happening!")
        // see how much each "X" is going to count as
        var pixelsPerX = largestCount / 100
        // output this data to the file
        inOutFile.write("One X = " + pixelsPerX + " pixels.\n")
        // output the name of this histogram
        inOutFile.write(inHistogramName + "\n")
        // loop through all the items and output in the following format
        // 001
        // 002
        for (histogramIndex = 0; histogramIndex < inHistogram.length;histogramIndex++) {
        // I need an extra "0" for this line item to keep everything in line
        if (histogramIndex < 10)
            inOutFile.write("0")
        // I need an extra "0" for this line item to keep everything in line
        if (histogramIndex < 100)
            inOutFile.write("0")
        // output the index to file
        inOutFile.write(histogramIndex)
        // some spacing to make it look nice
        inOutFile.write(" ")
        // figure out how many X’s I need
        var outputX = inHistogram[histogramIndex] / largestCount * 100
        // output the X’s
        for (var a = 0; a < outputX; a++)
            inOutFile.write("X")
        inOutFile.write("\n")
    inOutFile.write("\n")

  • HELP: Need clear, simple guide to setting up two WAC120

    I need a clear, simple guide to setting up two WAC120 Access Points.
    I have purchased two WAC120 units.
    I live in a 4 story home. I have put the...

    I want to boost the WiFi signal in my house. I have a WN203 AP. I have found the manual on line but, can't seem to make sense out of it. Does anyone...

  • I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library from all of my devices?

    I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library and songs from MY phone ?

    this is not a reply - i asked the question - still trying to learn how all this works - someone please HELP ME

  • Optus ADSL2+ and WRT610n Quick Guide to setting up.

    Hi all fellow Optus (australian isp) ADSL2+ and Linksys users,
    I have a quick guide to setting up your new WRT610n with the optus supplied ADSL2+ Speedstream 4200 modem. This should solve most users problems with no internet connections, firewall rules not appearing to work properly etc.
    It took me several hours of stuffing around and online researching untill I got these two to work together and have full firewall funtionality!
    First up.... DON'T USE the LELA to setup the router! For some unknown reason, the laptop I used to setup the router, was configured by LELA to be a proxy and gateway, and unless that laptop was on.... the router wasn't passing info through it and back out to the internet! A full Reset of the Router was needed to clear this setting!
    Now Lets get started.
    BEFORE inserting the router into the network and connecting everything up, we need to reconfigure the Speedstream modem to FULL BRIDGE mode. NOTE! this will infuture disable the Web interface to the DSL modem, so changing to FULL BRIDGE mode should be the last thing you do to the modem before logging out. A full hard reset (little button) will restore the web functionality again should you need to put it back to normal.
    1) Setting Speedstream 4200 to Full Bridge mode - This is necessary for the Modem to fully pass on ALL of the ISP settings. Such as correct gateway info, DNS info, "REAL" online IP address (not the generic psuedo 10.x.x.x number) etc.
    - To do this, open your web client, Internet Explorer or similar. And enter the IP address 10.1.1.1
    - Feel free to look around the settings of the modem but don't change anything just yet. Wouldn't be a bad idea to take screenshots of all the settings pages now like I did should I need to return it to original settings.
    - The Webpage of the modem will open up and click on PPP - Take note (as in write this down!) of your "PPPoE 8/35" type which you'll select in the router later, and your Username for optus logon and password (you should know that or go looking for that paperwork that has your username and password that came with your optus Modem installer CD). You will enter all this login info in the router later as the router will do the logging in and take over from the modem!
    - Next, click on Mode - You will see 3 options. For most, it will currently be on Optus Bridge. This mode enables a router inside the modem and is now to be replaced by the new Linksys you just bought. By Changing this to FULL BRIDGE mode, you essentially disable the modems internal router and turn it into a dumb modem (like the good old days of dumb dial up modems yey!)
    - When you've changed to FULL BRIDGE mode, it will tell you the Web interface is now disabled. Close the window. And lets get to configuring the router.
    2) Plugging everything in time!
    - The Speedstream 4200 ADSL2+ Modem stays plugged into the wall as normal, but the LAN cable which used to go to your computer now plugs into the WAN port of the router.
    - Plug the PC into one of the LAN ports of the Router also.... or if like me, you have a Switch that all the PC's use, plug that into the router.
    3) Setting up the WRT610n (or similar linksys router)
    - Open Internet Explorer/Firefox and enter the IP Address of the Router (Fresh install IP is 192.168.1.1)
    - Username is "admin" and password is "admin" (you'll want to change this later I'm sure)
    - OK now your in! We need to setup the internet account settings.
    - Setup-Basic Setup page:- Internet Connection Type will be what you saw in the modem PPP page (you did write that down didn't you?). For me, I select PPPoE.
    - The enter my optus username info and password
    - click on Keep Alive (30 Secs).
    - Then click Save Settings at the very bottom of the webpage.
    It will likely ask to reboot.... let it do so
    Now at this point:
    - Your modem should have always been in Sync
    - Your LAN IP from the WRT610n should be in the 192.168.1.100+ range? (I changed this later to put my IPs back in the 192.168.0.100+ range so I didn't have to reconfigure static PC's or printers around my network)
    - Your Router should have reset about now and hopefully logged onto the internet through the modem.
    To check all is working fine. Open the Routers webpage again and click on Status. Under the Internet Connection area, Click connect if it hasn't already connected for ya. This page should auto-refresh.
    Check that the connection says Connected and that the IP addresses given in all the fields appear to be internet addresses (ie not 10.x.x.x or 192.168.x.x etc). If not, check that the status lights on the modem are all correct (you know how it should look when it's ok).
    Open IE or firefox and check that you have internet!
    It's important to make sure that the Internet IP Address in the Status page matches the one you get from http://www.whatismyip.com/. Because if it doesn't, then the Router isn't truely at the front of the Internet-Lan boundary. If this is the case, you may still have internet working ok, but the firewall portforwards may not work as seen in other forum posts around the net.  
    If it's OK, then Grab a Beer and Celebrate, you've just saved yourself 6 hours of hair pulling frustration!
    SUCCESS!
    Now, if your so inclined.... I would highly recommend changing Admin passwords, adding security to your Wireless connections, changing your DHCP to something your comfortable with or just leave them alone if everyone is server assigned IP's. I find it's a good idea to use the DHCP Mac reservation in the basic setup so I know each PC will get the same IP each time it logs into the router and thus makes Portforwarding SOOoooo much easier knowing the IPs don't change on you when the IP lease time expires if the PC has been offline too long.
    Please feel free to comment on this, I'm pretty sure 99% apart from grammar is correct! Hope it helps many new and old users.
    Have a brilliant day! and may the force be with you!
    Ramjet

    It's not clear to me exactly what problem you're having, but does this post help?
    http://discussions.apple.com/message.jspa?messageID=1806715#1806715

  • On a mac with more than one user "spaces" can icloud be set up with different apple IDs for different users?

    I share a mac with my family, can icloud be set up for just my part of the computer and another part of the computer to have a different icloud account?

    Plz, are finding how doing wcdma simulation with Labview(uplink,Dowlink),if you have some good news email me at [email protected]
    BR
    Ahmed

  • I have my iphone 5 set up with Itunes on one computer, but I recently just bought my own computer. How do I set up my Iphone with the new Itunes account? Its telling me it can only be set up with one account. Do I have to delete the other account?

    i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account? It says my phone can only be set up woth one itunes account. How do I remove the previous account?

    ThisGal_Drea wrote:
    i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account?
    Do you mean iTunes library?
    iTunes account is what you use to make iTunes purcahses.
    iTunes library is what is on your computer.
    It says my phone can only be set up woth one itunes account. How do I remove the previous account?
    No, it tells you it can only be sync'd with one iTunes library.
    Simplest way is to copy the entire /Music/iTunes/ folder (thisis the iTunes library) from old computer to new computer.

  • How can I re-set the App Store so the Updates will again appear under the Updates tab?

    Hi,
    I am running a Macbook Pro (retina). Lately when I launch App Store and click on Updates the software updates for the software on the Macbook do not show up under the Updates tab. However, when I go to the Purchased tab I see there Update buttons next to programs that have updates ready to download.
    How can I re-set the App Store so the Updates will again appear under the Updates tab?
    Many Thanks,
    David

    Wanna know this too

  • When i try to set up my icloud account the system says it is sending me an email to verify.  I never get the email and it is not in my spam filter.  How can i get set up??

    when i try to set up my icloud account the system says it is sending me an email to verify.  I never get the email and it is not in my spam filter.  How can i get set up??

    Make sure that your Apple ID is your email address and you do not have any other or old IDs associated with you. Go to www.appleid.apple.com and confirm this info. Make sure that the email address you are trying to sign up with is your primary one.

Maybe you are looking for