Can HD Movies be viewed via Component connection?

Does anyone know if an HD rental can be viewed over a component connection?
If there's a need for HDMI to be connected, could I still do the actual viewing over component?
(I have a TV with no HDMI port, but it will display HD resolution via component. I have a problem with my cable provider because it will only send HD through HDMI - regardless of what's plugged-in to the set top box.)

you can use either HDMI or component.
watching an HD movie over component will work fine.

Similar Messages

  • HT200109 Can rental movies be watched via Apple TV from an iPad 2?

    Can rental movies be watched via Apple TV from an iPad 2?

    They can be rented on the iPad and sent via airplay to the Apple TV, if that's what you are asking. They cannot be rented on the Apple TV and sent to the iPad.

  • Connecting to NTSC monitor via component connection

    I'm getting ready to add an NTSC monitor to my home editing system and I want to connect via the RGB for the best color correcting results. I don't want to go through a deck - mostly because I don't own one and none of my cameras do a component signal out. Anyone have any thoughts on the best means of getting an RGB signal out of FCP to an NTSC monitor?
    G4 mirror door dual 1 ghz   Mac OS X (10.3.9)   fcp 4.5

    New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
    If we use the forums properly they will work well...

  • Can't see design view after changing connections file from localhost to a remote host & back again

    I was using localhost to test files before changing the connections document over to a remote host, since I couldn't get dreamweaver to connect to the remote host, I changed back to localhot. My files are all .php files. This is a dynamic site. After I changed my connection back to my local host my design view no longer works. It's competly grey with 3 small icons at the top on the left. I can view in live view and I can view in the browser. But no longer in design view after being able to for 6 months. The 3 icons are a hard drive case, a document, and a link symbol . When I click in code view the design view turns grey when I click in design view it turns white. I am using wamp for the localhost, Windows XP home, Dreamweaver CS5. Can someone please tell me how to go back to design view. This happens with any & all files including non dynamic .html files. Also having a problem connecting to my remote host. using godaddy, and they have tried with me for 2 hours to connect, I just keep getting password is incorrect. Thank you for any help, Stacey

    I would also recommend clearing the Site cache, which may help with the connection failure. To do so, choose Site > Advanced > Recreate Site Cache.
    After doing so, be sure to go back into your Site Setup, and make sure the FTP address, user name, and password are all correct. (Click the Test button in there to verify.)
    If that doesn't help with getting connected to your server, you might try an alternate FTP client (e.g. FileZilla) to just make sure you are entering the right connection information. It could be that GoDaddy is having some issue, or maybe you just mistyped something (I know I do this often when I type too fast).
    As for the issue with Design View, try clearing the Dreamweaver cache. Instructions are here: http://forums.adobe.com/thread/494811
    You might also try toggling the location of Design View. That is, when in Split View, choose View > Design View On Left. Then, choose that menu option again to reset the location back to the right.
    Resetting the workspace might also be recommended. Window > Worksapce Layout > Reset 'name of current workspace'

  • Can't access management interface via vpn connection

    Hi all,
    I can't seem to be able to manage my ASA 5510 when I connect via vpn. My asa sits at a remote colo, and from my office i can connect fine. I have it configured as management-access (dmz), bc as of now we are just doing some staging and all the servers are in the dmz interface.
    When i connect with the vpn client, in the routes it sees 192.168.1.0 255.255.255.0 which is the management network/interface.
    For some reason I can't get access to 192.168.1.1 to use the ASDM.
    Here is how i did my vpn via CLI
    isakmp enable outside
    isakmp identity address
    isakmp policy 10
    authentication pre-share
    encryption des
    hash md5
    group 2
    lifetime 86400
    ip local pool vpnpool 10.1.1.2-10.1.1.10
    access-list split_tunnel standard permit 192.168.200.0 255.255.255.0
    access-list split_tunnel standard permit 192.168.100.0 255.255.255.0
    access-list split_tunnel standard permit 192.168.1.0 255.255.255.0
    group-policy xxxxx internal
    group-policy xxxxx attributes
    dns value
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value split_tunnel
    username xxxxx password
    username xxxxxx attributes
    vpn-group-policy xxxx
    username xxxxxx password
    username xxxxxx attributes
    vpn-group-policy xxxx
    username xxxx password
    username xxxx attributes
    vpn-group-policy xxxx
    tunnel-group xxxx type ipsec-ra
    tunnel-group xxxx general-attributes
    address-pool vpnpool
    tunnel-group xxxx ipsec-attributes
    pre-shared-key
    access-list vpnra permit ip 192.168.200.0 255.255.255.0 10.1.1.0 255.255.255.0
    access-list vpnra permit ip 192.168.100.0 255.255.255.0 10.1.1.0 255.255.255.0
    access-list vpnra permit ip 192.168.1.0 255.255.255.0 10.1.1.0 255.255.255.0
    nat (inside) 0 access-list vpnra
    nat (dmz) 0 access-list vpnra
    nat (management) 0 access-list vprna
    crypto ipsec transform-set md5des esp-des esp-md5-hmac
    crypto dynamic-map dynomap 10 set transform-set md5des
    crypto map vpnpeer 20 ipsec-isakmp dynamic dynomap
    crypto map vpnpeer interface outside
    Any help would be much appreciated

    it seems like you are missing a line:
    management-access "interface"
    http://www.cisco.com/en/US/docs/security/asa/asa71/command/reference/m_711.html#wp1631964

  • Can you override record pcode via component record pcode?

    Normally both record peoplecode and component record peoplecode is executed for a given record/field. You can control processing in record pcode by testing on %component ... but is there a way, in the component record pcode, to prevent or completely override execution of the corresponding record pcode script?

    Ok - 84 people have viewed this and no one has replied, so I assume that the answer is, no. I'm marking this as 'answered'. Thanks, all.

  • Ovi can't find Nokia N8 via USB connection, but Bl...

    I just bought my Nokia N8-00 a week ago along with my girlfriend who got her phone last Tuesday. We have both the same problem with Ovi Suite 3.0.0.284 is not recognizing the phone is connected to the computer with the USB-cable that came along with the phone.
    The computer discover the phone and add it in explorer with the USB-cable and charging works with no problem. So the cable can't be the source of the problem. It also seems like the phone recognizes that the Ovi Suite is running on the computer. The Bluetooth connection works with Ovi Suite, so I don't think the phones are the problem.
    Remember we have 2 similar phones bought from 2 different big dealers/chains and we have exactly the same problems with the USB-connection in Ovi Suite 3.0.0.284.
    I think this is a software issue with Ovi Suite. Have anybody tried a earlier version with Nokia N8 without this problem? The N8 model is rather new so maybe a earlier version of Ovi suite don't support N8...I don't know...
    Will be grateful for any response to this issue :-I

    Hi,
    I have the same problem running Vista and Ovi ver. 3.0.0.290. I ran through your steps but no change. It's a brand new N8 and the phone will not show as a New Device via the USB connection. Although configured to start when connecting the phone via USB, Ovi will not start so I assume the connection is not established between Ovi and the phone. My laptop sees the phone just fine and files can be transfered vie Explorer. Any other ideas? Much appreciated. 
    Thank you in advance!
    Screenshot attached.
    Attachments:
    OviUSB Connection Problem.jpg ‏31 KB

  • HT1535 I just started my new mini IPad, and when I clicked the network, my connect to iTunes went off, now I can't move on or get that connect to iTunes back on the screen so that I keep going

    IT is so frustrating,because I cannot go further without being connected to iTunes..it's a brand new mini IPad, and I gave the network and then the iTunes thing to press to connect disappeared...HELP!

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Since you are a new iPad user .....
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download an iPad User Guide to the iPad from the iTunes store.
     Cheers, Tom

  • Can I watch i-view via apple tv?

    Am I able to watch i-view and the like on apple tv or is it only for itunes and the other things taht come up on the apple mernu?

    this is whats is plays
    http://www.apple.com/appletv/whats-on/
    other than that it can be airplayd to from ios devices such as iphones and ipads to play what the ios device is playing unless the app of the ios device actively block airplay

  • I can not change the view of Ipad from vertical to horizontal

    Since 2 days I can not move the view of the screen of my Ipad 2 from vertical to horizontal?
    rs

    On the top of your screen do you see a little padlock with a circle around it? If so, that's the rotation lock. There is a little switch by the volume controls that serves as either the rotation lock of an all mute. If you see the padlock, try flipping that switch to see if it allows your device to rotate.
    Is it not rotating in everything or just in a few apps? Because there are some apps out there that will not rotate, they are portrait or landscape but will not do both.
    If the switch doesn't help you can go into the settings, general and see if the side switch is set to all mute or rotation lock.
    If none of that works, try giving your device a reset. Hold down the sleep and home keys for about 20 seconds. Once you see the silver apple let the buttons go and let it reboot. See if that helps
    If not, try going into the settings and 'reset all settings'. You will need to retweak your device but it may clear things up.

  • I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

    I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

    Not without a player..
    The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
    There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
    A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
    Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
    You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

  • Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear-) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay

    Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear…) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay to my Ipad. My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library? I`d appreciate any help. Alex.

    My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
    On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

  • If i connect an external hard drive to a time capsule, can i access this drive via internet?

    If i connect an external hard drive to a time capsule, can i access this drive via internet?

    If the drive can be accessed in local lan, then it can be accessed from internet assuming you have setup using one of the remote access methods.
    See remote access here.
    https://discussions.apple.com/community/wireless/airport?view=documents

  • How can I tell how many devices are connected my itunes account via icloud?

    How can I tell how many devices are connected my itunes account via icloud?

    I only know what it says in the article.  There it specifically says "iOS device" and it says. "You can view which devices or computers are  currently associated," and, "Next to each device or computer name, you will be able to see when each was associated to your Apple ID."  However, this is all in the context of, "When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID."  I guess if somebody simply logs in it won't show.

  • How to keep movies purchased on my IPad, for viewing without internet connection?

    How to keep movies purchased on my IPad, for viewing without internet connection?

    If they were bought from itunes, Once they are fully downloaded you can watch them without any internet. They play locally.

Maybe you are looking for