Can hear metronome but no other sound in Multitrack

So I just installed Windows 7 and am trying to get Audition working on it.  I can hear the metronome in multitrack, I can record and see waveforms, and when I bring them into the Edit view I can hear them.  It's just in multitrack I get no monitoring and I cannot play anything.  Both my edit and multitrack outputs are set to the same thing, my Fast Track Pro, so it's not that.  I'm not sure why I can hear the metronome in multitrack though.  Any suggestions?

ssycko wrote:
It's just in multitrack I get no monitoring and I cannot play anything.  Both my edit and multitrack outputs are set to the same thing, my Fast Track Pro, so it's not that. 
I bet it is... if you can't play anything (ie the transport doesn't work) then it's virually got to be either the audio driver, or the way it's set up - nothing else stops the transport.

Similar Messages

  • IPhone 4 - can hear music, but no other sounds

    When I got up this morning, I had a IM message. I didn't access it right away, then went and took a few pictures. On the last picture I tried to take, my phone froze. I couldn't swipe to open and couldn't swipe to close.  I finally got it to close by pressing the top button and the centre button at the same time.  Now I have no sound when texting or sound when i send an email and can't hear my phone ring, but I can hear my music.  Any ideas?

    Make sure that "Do not disturb" is off in Control Center. Also, make sure you have turned the volume up while at the home screen and with no music playing.
    -Ethan

  • Can hear iTunes, but not other programs

    I recently did an update to iTunes and ever since then, I can not hear sounds from other sources, such as if I go to Youtube. In the sound settings, I get that there is "audio device detected". When I try to listen to a system sound, I get a message that says "Windows can not play the sound because the sound card may be in use". But I CAN hear iTunes.
    Also, I have tried a system restore to a point prior to the iTunes update, but Windows didn't recognize any changes and would not go back to the restore point. Also, in device manager, it says the sound card is working properly.
    Any ideas, if iTunes caused this?
    Thanks!

    Try and update your audio drivers:
    http://docs.info.apple.com/article.html?artnum=300252

  • No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help? Thanks

    No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks

    This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
    https://discussions.apple.com/thread/2475631

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • HT201401 When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't h

    When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
    - During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
    - With the headphones, everything is ok!
    - I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
    I don't know what is problem,because the speakers work.

    Hello jam5064,
    We've an article which provides tips that can help get your iPhone working correctly.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • Hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation.

  • Having upgraded iOS7 on both my iPad and iPhone yesterday, I am now not able to use my FaceTime on either device. I seem to get through and the other party can hear me but I can see nor hear nothing.

    Having upgraded iOS7 on both my iPad and iPhone yesterday, I am now not able to use my FaceTime on either device. I seem to get through and the other party can hear me but I can see nor hear nothing.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
     Cheers, Tom

  • When I connect via face time with my friend's ipad or iphone we can see each other and I can hear them but they can't hear me.  HELP!

    When I connect from my mac via facetime with my friend's iphone or ipad we can see each other and I can hear them but they can't hear me.  The mute is not applied, and the microphone seems to work with other applications.  Help!

    I have same issue in my MB Air with Snow Leopard.   It used to work fine but one day I found that the mic mute was locked on.   I went to System and ensured mic was working by seeing the bars move.   I went to Facetime > Video drop down and it is all greyed out so not active and the mic symbol in Facetime pane has a line through it (muted) and is dead.    I have tried everythinng to UNmute the mic.   Two way video is fine and I can hear the other party perfectly.    Seems like this happened about the time of a Snow Leopard update but may be wrong.    Issue is several months old and, well, getting old!    I love Facetime with my grandkids etc. who all use Apple stuff.    There HAS to be a way to reactivate the mic in my MB Air.    Could someone please help??

  • I have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

    i have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

    Hi gallimore1998,
    It sounds like you may be having an issue with one of the microphones on your iPhone. Here is an article that will help you address this:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • I phone 4 when face timing i can hear people but they cant hear me

    i phone 4 when face timing i can hear people but they cant hear me. help

    Having similar problem here only the other way around. The people on the other end of the phone can hear me but I get no sound at all. I can communicate if I plug in the earphones or put the caller on loud speaker. When this fault is occurring I also lose most sounds from my phone. Instead of getting an incoming message noise it only vibrates. I also lose all keypad and lock etc sounds. This problem comes and goes and is truly annoying. The phone is still under warranty but it will be an inconvenience trying to have this problem rectified. It would be interesting to know if it is a hardware problem or another problem created by the upgrade to this os system to 4.1. Either way it is a problem that Apple need to look at urgently as it appears to be fairly wide spread from my research on these boards. I suggest everyone who is having this problem also reports it via the feedback page on the apple site
    Message was edited by: Shemax

  • IChat buddy can hear me but I can't hear them...help?

    Hi, can anyone help? I have an iMac, OS X 10.4.11, and iChat version 3.1.9.
    My boss and I have set each other up as buddies. She can hear me but I CANNOT hear her. She has recently upgraded to Leopard. We do not want video, just audio. We have both checked system preferences sound, input and output, and checked iChat preferences sound under video. We checked security to see we weren't blocking, and my ports are 5190 at the top and 1080 at the bottom half of the dialog box. My bandwidth limit is none. I can hear all other sounds that ichat makes, the pings etc., but i cannot hear her voice.
    Any suggestions? Would be most grateful. Many thanks.

    In iChat > Preferences > Video Section does the Mic in the drop down match the one in System Preferences > Sound > Input tab ?
    Do the response bars show when she talks ?
    During the Chat, in the Connection Doctor from the Video menu (menu Bar) does she show as sending you a Audio feed ?
    10:34 PM Thursday; January 10, 2008

  • I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

    I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

    the mute button is a switch you need to flip, not touch. if you look at it and see color, its on.

  • I can hear caller but he can't hear me except on hands free and speaker phone

    I can hear caller but he can't hear me except on hands free and speaker phone, hoew to fix this problem

    Hi Shirley,
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • I can hear people but they can't hear me

    I can hear people but they can't hear me

    Usually issues that have to do with Call audio, dropped calls etc, need to have the SIM Card/service ruled out first.
    Take the SIM card out of your phone and put it in another to see if issue persists. If it does then its something with your location/service and you need to contact your service provider.
    If it does not persist in the other phone then you will want to do a reset and then a restore if issue persists.
    #1: Reset: http://support.apple.com/kb/HT1430
    #2: Restore: http://support.apple.com/kb/HT1414
    Also a simple phone restart will fix 9/10 issues like that.

Maybe you are looking for

  • Should we use JDeveloperor VAJ with BEA Weblogic?

    I work in an organisation that extensively uses Oracle, and we have brought in an Ecomerce solution that uses EJBs/JSPs on BEA Weblogic with an Oracle back-end. We have used JDeveloper for stand-alone Java development previously and already have lice

  • Work Flow Log

    Hi , How can we see the workflow log . Rgds, Premraj

  • How to create a role using profile SAP_ALL

    I want to create a role which has the same authorizations as SAP_ALL except several tcodes.Because SAP_ALL is not a role ,I can't do it by the way of copying role. how should I do?

  • Where is my Skype Premium?

    I've had my Xbox One since launch day and I'm logged into Skype on the console but my account does not show my 6 month trial of Premium. It only has an option for me to sign up at $9.99 a month. I thought every Xbox One user with an Xbox Live Gold su

  • Sun jre1.4.2 VS IBM jre1.4.2

    Hi all, I'm a tester and we have recently migrated our Java Swing Client application running from jboss server to webshpere server. before to migration we were using sun jre1.3.1_02 and after migrating we are using IBM jre 1.4.2_09. my doubts are 1)