Can hear noise while X-fi is switched
I just got a 8gb Zen X-fi and when I switch it off I can hear noise coming from the headphones. It's not loud but noticeable if you're in a quiet room. When I switch it back on again I can't hear it anymore. I was wondering is this supposed to be normal? (I'm guessing it's not). It seems that if I were to keep the headphones plugged in while it's switched off and leave it overnight for example there would be some impact on the battery... because the **bleep** thing is still "on" in a way.
The AudioConsole would be more than enough. It comes with the drivers, you can adjust all settings and is pretty simple.
Similar Messages
-
Can't update/ also hear noises while connected to mac
I have an OBS, 20G Ipod color display. Recently, I decided to use it to connect to my 2012 chevy cruze through my car's USB port. It plays for about a minute then a message displays on my cars screen saying device cannot be identifyed and it stops playing. After that, I figued maybe my Ipod needs an update. The software is version 1.2.1 and my itunes is saying my ipod is up to date, which I know isn't true. My ipod also says the format is Windows, which may be a problem as I now have a Mac.
I have the latest itunes and I have a Mac OS X 10.9.2.
I have also noticed my ipod making a clicking sound while it's connected to my mac. It continues to click after I unplugged it as well for a good few minutes while displaying "do not disconnect" with the big red symbol across. When the clicking fully stopped, the "do not disconnect" message went away and I was able to get back into my ipod.
Now, I realize my device is very old. But are there any suggestions for my situation? Ultimately, I want to use it in my car since my android is not recognized by my cars USB port.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I published a video as an mpeg, and when I listened to the final product it was missing some music I had in the "audio 2" slot. How do I fix this?
Cameron
Is the problem Audio Track 2 music from any of your royalty free music websites? Is the sound missing in the export
standalone audio files
or
audio that is linked to video?
What is directly under or above these files on the Timeline?
Download and install the free codec utility named GSpot.
And, tell us the readouts for Audio name, codec, and status.
GSpot Codec Information Appliance
If also video component of the file, then please include the Video name, codec, and status information from the GSpot readout.
See what information you can put together on the properties of those royalty free audio files, including file extension. Are you dealing with Stereo or 5.1 channel (AAC or Dolby Digital)?
As for project preset, versions 11 and 12 were designed so that the project takes charge of setting the project settings based on the properties of
the first file drag to the Timeline. Sometimes it does it right. Sometimes not. If not, then you set the project preset manually using the properties of
your file. See ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Lots of additional questions...curious how you hear the Audio 2 audio in Edit area but not in the exported file which you report as
Publish+Share>Computer>MPEG under the preset "MPEG2 1920x1080i 30.
Any export setting customization going on under the Advanced Button/Video Tab and Audio Tab of that preset?
Please review and consider and then we will decide what next.
Thank you.
ATR -
??
If the Skype app does not have a setting to continue to use the mic built into the iPod when headphones are plugged in, you will have to use a pair of headphones that includes a mic.
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic?fn ode=75 -
I can hear my mouse wheel, through the speakers
Since the last update I can hear noise from my mouse wheel, through the speakers. What is up? It is rather annoying!
Can you hear the noise if you only open one tab to one very simple page that doesn't have any audio/video content? There are some strange "audio quality" issues with the June 8th Flash 11.3 release; I wonder whether that is involved in your case.
-
Ever since I got my Iphone 4s, I have noticed that when I film a video and play it back, it has this buzzing noise and when im in the middle of filming a video and I focus on something, you can hear a click where I have focused when I play it back, is this the microphone? can I fix it myself? or do i have to take my iPhone in to be properly fixed? Help Me please!!
See this veeeeeeeeeery long thread.
https://discussions.apple.com/thread/3404857
It's an issue with hundreds of phones. Some claim it's software related, some hardware, some say it's a mixture of both.
Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
So far the only solution that seems permanent has been to replace the phone. But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing. -
Mac Mini emitting beep-like noises while switched on
Hi all,
I have a late 2011 Mac Mini which has been working fine until today.
Today, it started emitting really annoying beep like noises while switched on. The Mac Mini functions as usual, safe for the really loud, really annoying beeping noises, which seem pretty much to occur randomly, and sound pretty random too (as opposed to steady system warning beeps).
I also opened the Mac-Mini hatch, checked the RAM was connected properly, and removed dust/fluff, but the beeping still happens.
I ran the Apple Diagnostic and also checked the Disk using disk utility, but got no errors, and I can't seem to find anyone who has had a similar issue on the net.
Any ideas?
Thanks in advance!Google -- Mac Mini blinks and beeps
when turned on
It will take you to where you need to go to solve this problem.
Mine did that and it took me to Apple Support page identifying what was going on.
Slow blinks, fast blinks, etc etc
Power On Self-Test Beep Definition - Part 2 - Apple Support -
I have bought a Mac i7 3 days ago and i can hear a weird noise in intervals like some sort of blowing sound ; is it normal or should i be worried about this ? please advise .. my model is i4 13 inch mac pro .. thanks in advance!!
We have a MacBook Pro and it is usually quiet, but it sits in a stand to allow air under the bottom.
Just my opinion, but based on experience.
You are still eligible to purchase the longer term AppleCare warranty I think (3 years if my memory is correct). While it is an expense that you may never need, in my opinion, it is cheap insurance based on the cost to repair computers. I buy it and more than once it has paid for itself many times over. Not that Apple products are bad, but electronics do weird things at times. -
ADSL dropping out and can hear router noise throug...
I recently switched to BT from Sky and have had a problem with intermittent dropouts and slow speeds with both providers. Along with this, I can hear router noises on the telephone line. I have tried the microfilter in the master socket and test socket and the problem occurs with both of them. Does anyone have any idea what might be causing this?
have you tried another filter or router if available
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
MarcoHello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M. -
HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.
-
I am current in Sotheby's Africa and trying to FaceTime my daughter who also has the same ipad as me. My son in law also has the ipad. Despite using my daughters email, I cannot get through to her or my son in law. When I hit FaceTime I can hear the ringing tone, but after a while it comes up saying my daughter is not available, but she is sat by her ipad in the UK. I have checked everything is working so what can I do now to get through to her, especially for Xmas day.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers, Tom -
I have an iphone 5 with ATT and sometimes (very randomly) when making a call, it does not make a ringing sound (like it is not connecting), but it has connected and the other person can hear me but I can't hear them at all. When I do try and say "hello" to see if they can hear me all I hear is my own voice echoing back. Other times the phone conncts and rings immediately and I know then that the call is working.
I actually got it to do this while on the phone on my landline with applecare. I did all of the resets with Apple and they determined it was a hardware problem and I received a new phone. It seemed to be ok, but three days after activating it, the same thing happened. There does not seem to be any common factor. It happens with landlines, cell phones, inside, outside and it does not always do it to the same number twice. It is a complete crap shoot. I have noticed that is it much more likely to happen if I go through "contacts" or "recents" to make the call. It has also happened a few times when using Siri to call. I never know until I don't hear the ringing sound that the call is messed up. This is awful when trying to contact a business and you have to keep calling them back. Anyone else?Thank you for taking the time to reply! Yes. I did back up the first phone in itunes and updated the new phone with that information. During the diagnostics with apple on the first phone, I did completely wipe the phone clean and it still had the same problem --- again randomly. The technician today did want to do a complete factory reset on this phone but my question is if it is something that I am re-loading on the phone, how do we know what it is?! Also, if the other phone acted up without anything on it before I was hesistant to do it again. It is a lengthy process! I was to try and use the phone without the case (otterbox defender) and see if it would mess up --- which it did. So it's not the case. I am still wondering if it is an ATT/iphone issue. Again - thanks for your help!
-
When I try to, the person on the other side can't hear me, and all I can hear are noises. But when I use apps like Viber or Facetime, I can make calls just fine! What may be the problem?
Did you fix the problem? I have the same problem and it has been pain in the neck.
-
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.
Maybe you are looking for
-
How to use two gtx transceivers in one quad for two aurora ips
hera mgt bank is 113 i am using two aurora ips 64b66b .for one ip GTX_X1Y0, another GTX_X1Y2.while simulating ,results are good.Coming to implementation its showing error in implementaion.that in MAP. Pack:2811 - Directed packing was unable to obey t
-
Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.
-
Hi Just started with lightroom3 like it but. Exported my lightroom3 edited photos using export to harddrive folder, format choosenTiff no changes requested. All exported files have a very small rotation when viewed in lightroom or windows slideshow.
-
I want to delete a volume curve (not points) entirely but don't know how?
Hi all, I have a very simple project on Garageband.(2 tracks) One is an imported Wav, which is a mix of instruments. The other track, is a MIDI recording from one of my VST instruments. During the recording of this VST organ, I played (via MIDI)with
-
Hi! My telephone is motolola a1200 is based on linux and microSD card inside it is fat16 formated It's very strange but when I mount in via USB on my Mac I can copy any file into microSD but can't copy from in files more than 1mb. I have 2 Macs aroun