Can hear visual voicemail without speaker or headphone

Hi!
I just noticed that, once I turn on the playback of a recorded message in visual voicemail without having headphones attached to the phone, I can hear that message very quietly even though the speaker is not turned on.
The sound seems to come out of the top of the unit, not the bottom where the speaker is placed. Does anybody else encounter this behavior?

Well Voice mail plays by default through the earpiece (hold it to your ear to listen). Just like any other phone when you call into voice mail. Being local visual voice mail is no different. If you activate Speaker Phone then it will play from speaker.

Similar Messages

  • On my iPhone 4 I can play music through the speaker or headphones, but I can not get audio in phone mode, I can't hear anything nor can anyone hear me! Help. Please.

    On my iPhone 4 I can play music through the speaker or headphones, but I can not get audio in phone mode! I can hear anything through the ear piece or via a headphone. Nor can people hear me when I call. I must be doing something wrong, but what?

    Hello Angela,
    Thank you for the details of the issue you are experiencing with sound on your iPhone.  I recommend the following steps for an issue like this:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the full article here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When i call someone i can not hear the phone ring or the people talking.  they can not hear me either.  what i do notice if i select speaker then i can hear them through the speaker phone only

    when i call someone i can not hear the phone ring or the people talking.  They can not hear me either.  what i do notice if i select speaker then i can hear them through the speaker phone only

    If there's an Apple store nearby make an appointment with the genius bar to have it checked.  Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.

  • I get no sound when I play games on my iPhone 5s with just the speaker but headphone it works. Music works both ways. What do I need to do so I can hear my game without headphones like I can my music

    When playing games on my iphone 5s I can't hear any sound but if I play music from where ever it works. If  I put on headphones I can hear the game would like it to work with sound with out them too what did I do to mess up my phone help please

    Hello tiffay8,
    Thanks for using Apple Support Communities.
    From your post I understand you're not getting any audio output from your speakers when you're playing games.  Follow the steps below to resolve the issue:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Take care,
    Alex H.

  • No audio when recording and no one can hear me when using speaker?

    Whenever I take videos now, there's no audio it's just this buzzing noise. Kind of like white noise. I used to take videos on my phone all the time and it would work. I'm not sure how to fix this. Also, I can't use my speaker phone. I can hear people talk on it but they never hear me. That issue started one month after I got the phone. I've had it about 8 months now. Anyone know of any fixes?

    Does the Voice Memos app work? It has a VU meter so you can see if the mic is working.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • Can Hear From Mic through Speaker but cant capture in audacity

    Hi,
    I have the following Sound Card.
    05:08.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
            Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
            Flags: bus master, medium devsel, latency 64, IRQ 16
            I/O ports at e800 [size=256]
            Capabilities: [c0] Power Management version 2
            Kernel driver in use: C-Media PCI
            Kernel modules: snd-cmipci
    It is detected and I can hear the sound Sound from Mic Through the speaker.
    How ever I am not able to record it in audacity.
    Mic Does not work on Skype too :-(
    Could some one help me trouble shoot this?
    thanks :-)
    --Siju
    Simple mixer control 'Master',0
      Capabilities: pvolume penum
      Playback channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Mono:
      Front Left: Playback 24 [77%]
      Front Right: Playback 24 [77%]
    Simple mixer control '3D Control - Switch',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [on]
    Simple mixer control 'PCM',0
      Capabilities: pvolume pswitch pswitch-joined cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Front Left: Playback 28 [90%] [on] Capture [off]
      Front Right: Playback 28 [90%] [on] Capture [off]
    Simple mixer control 'Synth',0
      Capabilities: pvolume pswitch pswitch-joined cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Front Left: Playback 31 [100%] [on] Capture [off]
      Front Right: Playback 31 [100%] [on] Capture [off]
    Simple mixer control 'Line',0
      Capabilities: pvolume pswitch cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Front Left: Playback 31 [100%] [on] Capture [off]
      Front Right: Playback 31 [100%] [on] Capture [off]
    Simple mixer control 'Line-In Mode',0
      Capabilities: enum
      Items: 'Line-In' 'Rear Output'
      Item0: 'Rear Output'
    Simple mixer control 'CD',0
      Capabilities: pvolume pswitch cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Front Left: Playback 25 [81%] [on] Capture [off]
      Front Right: Playback 25 [81%] [on] Capture [off]
    Simple mixer control 'Mic',0
      Capabilities: pvolume pvolume-joined cvolume cvolume-joined pswitch pswitch-joined cswitch cswitch-joined penum
      Playback channels: Mono
      Capture channels: Mono
      Limits: Playback 0 - 31 Capture 0 - 7
      Mono: Playback 25 [81%] [on] Capture 6 [86%] [off]
    Simple mixer control 'Mic Boost',0
      Capabilities: pswitch pswitch-joined cswitch cswitch-joined penum
      Playback channels: Mono
      Capture channels: Mono
      Mono: Playback [on] Capture [off]
    Simple mixer control 'Phone',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
      Playback channels: Mono
      Limits: Playback 0 - 7
      Mono: Playback 5 [71%] [on]
    Simple mixer control 'IEC958 5V',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 Copyright',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 In Monitor',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 In Phase Inverse',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 In Select',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 In Valid',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 Loop',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 Mix Analog',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 Output',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'Beep',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
      Playback channels: Mono
      Limits: Playback 0 - 3
      Mono: Playback 2 [67%] [off]
    Simple mixer control 'Aux',0
      Capabilities: pvolume pswitch cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 15
      Front Left: Playback 12 [80%] [off] Capture [off]
      Front Right: Playback 12 [80%] [off] Capture [off]
    Simple mixer control 'Exchange DAC',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'Four Channel Mode',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]

    I had similar problems and could get nothing whatsoever when trying to record from the microphone or using it in Skype (it was obviously muted completely in some way). Tried everything I could in alsamixer, and installing PulseAudio didn't manage to get it working either.
    However I installed gnome-alsamixer, and ticked a few 'Rec.' check boxes and everything works now as it should! Sorry I can't pin down exactly what switched it on.

  • When making an outgoing call from my i phone, an icon of a microphone with a slash acroos it appears.  I can hear the receiving party speak, but he cannot hear me.  What has been shut off and how do I turn it on?

    When making an outgoing call from my i phone, an icon of a microphone with a slash across appears.  I can hear the recipient speakin but he cannot hear me.  What has been turnedd off, and how do I turn it on?

    I think mute is on, tap the microphone icon with the slash running through it

  • Can't retrieve voicemail without restarting phone

    For several months I have been dealing with a real nuisance and wondering if anyone else is, as well.  Whenever I get a voicemail, before I can retrieve it, I have to turn my phone off and on.  It will allow me to listen to multiple messages but once I leave the VM system, in order to listen to them again I have to restart the phone.  I absolutely HATE this phone and am just waiting until December when I'm eligible for an upgrade.  This is just one of many problems I've had with it.  I didn't want to go with an i-phone, but seeing my daughter have no problems like I have has convinced me that it is the superior device. 

        Hi there Shytel!
    Wow! That is the strangest way to access Voicemail I've ever heard of! I am so sorry you've been having to do this for so long.
    Before you actually reboot your phone, when you try to access voicemail, what happens exactly? Are you dialing *86-send manually or are you trying to access the Voicemail when you get the notification at the top of the phone?
    I'd love to figure this out together! Let me know!
    Thanks,
    MelissaM_VZW
    Follow us on Twitter @vzwsupport

  • When i press the "speaker" button/icon - i can hear ok , no one can hear me

    when i press the "speaker"button/icon - i can hear OK but no one can hear me on the speaker?

    Hello Michaelonesixthree,
    The following article provides troubleshooting steps that can help restore functionality to your iPhone's speaker.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • X3-02 SW V7.16: I hear myself when i speak !!!!!!

    Hello
    Every phone call, since the last update with the new SW V7.16 of my X3-02 RM-632, I can hear myself when i speak
    My phone was on v6.05.
    I am not using handsfree or speaker mode. Just plain phone call, the phone on my ear.
    Are there any Nokia staff/personnell that can advise us on this problem and when this next firmware release will fix this phone audio failure? 
    Best Regards

    Before updating my phone, I had version v6.05. I had no problem. But, this issue happened when I updated my phone with the latest version of SW v7.16. ==> No problem with the operator or sim-card
    Also, all items in the [Menu / Settings / Phone / Phone Update] are disabled. Except (Menu / Settings / Phone / Phone Update/Detail current software).

  • How do I conference in a voice mail message so that the person I call can hear a message that was left on my phone?

    How do I conference in a voicemail message so that a person that I call can hear the voicemail that is on my phone?
    Thanks!

    That's kind of what I thought but it doesn't help until I can get to another phone. I do not have a landline and I work from home.
    Thanks so much for your response!

  • HT4528 I just got 2 iPhone 5 . We can barely hear each other in them unless we put on speaker phone, then every one can hear. Is there somewhere to turn up volume for hearing without using headphones? It 'sounds' as if theyre in, and Im just holding in my

    I just bought 2 iPhone 5 s. I can barely hear the person on the other end unless I turn on the speaker phone..then every one can hear. I cant find a way to turn up hearing volume. Tried blue tooth on/ and bluetooth off. Phone ring is set high. Both phones are having the same problem, so must be missing something?

    thanks, that seamed to work. I had the volume turned all the way up but I guess maybe I needed to repeat that while using phone, sort of two step.. good to know

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • My iPhone only has "headphone" volume, no "speaker" volume.How do I fix this so I can hear phone calls?

    My iPhone only has "headphone" volume, no "speaker" volume.How do I fix this so I can hear phone calls?

    The phone may be stuck in headset mode. Rapidly plug and unplug a headset 10x to free up the switch inside the jack.

  • A can only hear volume when i use the headphones: no ringtones, no music, nothing without the headset. what did i do? it's a 48 hour old phone

    I have done something to my volume. there is no sound unless i use headphones. I must have done something when using suri, but i don't know what. i have turned the phone on and off with no change. please help. the volume is up, and the slider for mute is not on.

    I had a similar problem, I could only hear Siri when I was using headphones.  Without headphones, I would call up Siri and I wouldn’t hear that “ding” nor would she audibly speak back her answer.
    I found out that Siri has its own volume control.  To access it, activate Siri and when the Siri microphone pops up, go ahead and adjust the Siri volume using the volume controls.  I had my regular volume up pretty high but I had the Siri volume all the way down.  This was driving me crazy, now it works fine.
    Chris

Maybe you are looking for

  • Best way to handle user access levels with spring.

    I'm a spring newb, and I'm not sure how to properly handle user access levels with a validation controller. There seems to be a lot of information out there about creating simple login validators but like I've said I need to create multiple levels of

  • Ultrasearch and Portal Multi-language

    Does Ultrasearch provide any integration to the multi-language support in Portal? If a Portal user is working in French, does a Portal search return only the French content from the Portal Repository? Also, is there a way to specify language in the s

  • Where is the "Arrange Document" Icon in Top Menu Bar in PS CS6?

    PS CS5 had icons in the top menu bar where the "Arrange Documents" icons were located.  Now I can only find them in the Window drop down list.  Are they still available in CS6?  It was nice not having to find them in the "Window" drop down list.

  • Help in pagination w/ save feature

    hi, can somebody help me with my jsf code. basically this code displays inputText in tabular view and is paginated. The problem is when i press the save button. <h:form>                 <h:dataTable value="#{catsh.all}" var="cat" id="pager" rows="3">

  • Slowdown with iTunes

    In the past I have often had a kernel panic while using iTunes, forcing me to shut off the power to my eMac. More recently, I started recording streaming radio and started getting messages saying, "your startup disk is nearly full, you need to create