CAN HP Envy 15t j100 Support 2 external monitors?

Hi, I'm trying to figure out how to connect 2 external Dell monitors with HDMI inputs, to my Envy 15t j100. The evy has only 1 HDMI out port.  The Envy also has 4 USB 3.0 ports. Ideally, I would like the option to use all 3 displays (The Envy's and the 2 externals.)  But would be satisfied with just the 2 externals, extended 1 to the other, for desktop work. Any ideas? Is this possible?

Hi,
Unfortunately you can't use one HDMI port to connect to two monitor even with a HDMI spliter. You need a small investment to buy a piece of hardware and you can setup like:
Actually Dell monitor is the one on the left hand side. Two external monitors are all FHD. Please watch the following video:
     https://www.youtube.com/watch?v=WzEMhRoCl_U
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Envy 15t-J100 Nvidia Graphics card issue.

    Hello, I recently bought a HP Envy 15t-j100. I was under the impression that it came with a NVIDIA Geforce GT 740m graphics driver ( even has the sticker on the laptop) and a HP Intel HD 4600 driver. However when I went to device manager and looked at the display drivers, the Nvidia driver was not there. The only driver that was there was the Intel HD one. I then decided to go to the nvidia website and download the latest driver, but that didn't work because it told me it couldn't continue due to imcompatibility. I'm confused, I have the sticker that tells me that I "have" the nvidia geforce graphics card, but in device manager I don't see it. Help!

    Hi,
    The Envy 15t-jxxx series is a set of CTO machines. What is the model/product of your computer ? Please use the following instructions for find out the model/product of your machine:
      http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
    You can't see something like the following image ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Video freezes on my Envy 15t-j100 (E1P04AV)

    I bought this back in December 2013.  Back then, the video would freeze permanently until I closed the the window and reopened the video.   An updated video driver came out which helped a bit with the problem.  The computer now freezes for a few seconds and then continues.  Still annoying and shouldn't happen.   Any thoughts?
    Computer: HP Envy 15t-j100 (E1P04AV)
    Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
    System Board: 1962 KBC Version 93.51
    System BIOS: F.56
    Windows version: 8.1 64-bit
    Intel HD Graphics 4600
    Driver: 9/9/2013
    Version: 10.18.10.3304
    Thanks!

    Hi,
    Well, going back over your last 2 posts. Everything you mention points to a conflict between Firefox and Adobe's Flash. It's no secret that Firefox v. 31.0 has and is having a lot of problems. You can find this all over the web in a google search. As you've narrowed down the issue, the only suggest I have is checking out the Firefox forums(http://forums.mozillazine.org/viewforum.php?f=38) or Adobe's(https://forums.adobe.com/community/flashplayer). Maybe one of the two have a work-a-round or fix.
    You did make note that you thought IE was having an issue, this seems to have just "fixed" itself with flash. If you reinstalled or updated flash, that could have been the trick.
    If the issue occurs again from multiple sources, please let me know.
    I worked on behalf of HP.

  • WLAN for HP ENVY 15t-j100 Quad Edition Notebook PC

    I just purchased a HP ENVY 15t-j100 Quad Edition Notebook PC with Windows 7 (February 2014).
    It comes with 802.11bgn 1×1 WLAN module, which is not satisfactory so I would like to upgrade the WLAN to an Intel 7260ac.
    According to the user manual, the following two parts are the only WLAN whitelisted by the BIOS:
    #1:
    Intel Dual Band Wireless-AC 3160 802.11 ac 1×1 WiFi + Bluetooth 4.0 Combo Adapter
    Spare part number = 710662-001
    #2:
    Intel Dual Band Wireless 7260 802.11 bgn 2×2 WiFi + Bluetooth 4.0 Combo Adapter
    Spare part number = 717384-001
    I cannot find any of these models anywhere! I do find a 710661-001 on Amazon (which would be great if the BIOS accepts it! and good price too at about $35).
    Could someone tell me if I can put this WLAN card (710661-001 on Amazon) or where to buy the HP approved #1 and/or #2 card listed above?
    Thank you!

    Hi Arnaud_, welcome to the HP Forums. Unfortunately if the parts are not in the user manual I cannot guarantee they will work. You can try to buy it from HP PartSurfer.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Boot from mSATA drive on HP ENVY 15t-j100

    I purchased an HP ENVY 15t-j100 with a 1TB drive and 16GB RAM.  There is an avaialble mSATA slot in the user area so I purchased a CRUCIAL 240Gb mSATA drive with the intention of installing the WIN 8.1 OS and my programs on the solid state drive and use the slor (5400) hard drive for data.
    I used the Recovery drive I created to get the OS on the mSATA - no problem.
    It even boots up - but when I install the hard direve the system tries to boot from the spining drive - the BIOS shows that the Hard dirve is "in" Port 0 and the mSATA is Port 1 and there does not seem to be any what to change this so, after all the work and research it dies not seem like I can utilize the mSATA slot on this notebook.
    Any ideas would be greatly apprecaited.

    HLubert wrote:
    I purchased an HP ENVY 15t-j100 with a 1TB drive and 16GB RAM.  There is an avaialble mSATA slot in the user area so I purchased a CRUCIAL 240Gb mSATA drive with the intention of installing the WIN 8.1 OS and my programs on the solid state drive and use the slor (5400) hard drive for data.
    I used the Recovery drive I created to get the OS on the mSATA - no problem.
    It even boots up - but when I install the hard direve the system tries to boot from the spining drive - the BIOS shows that the Hard dirve is "in" Port 0 and the mSATA is Port 1 and there does not seem to be any what to change this so, after all the work and research it dies not seem like I can utilize the mSATA slot on this notebook.
    Any ideas would be greatly apprecaited.
    I have solved it by installing a third party bootloader on the main hard drive. The hard drive must be connected via USB to a computer (even the same laptop with the mSATA in as I did). I have used Bootice to install a bootloader called Plop .
    http://www.pendriveapps.com/bootice-partition-flash-drive-edit-boot-sector/
    Then put the hard drive back in and set the mSATA in Plop as the boot drive. Here is some info:
    http://www.plop.at/en/bootmanager/thebootmanager.html#b4
    I couldn't make it work but then I went to "Profiles" - "Linked partitions", picked the right partition, confirmed it and it worked.  However, I don't have the laptop anymore and can't say exactly what to do.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Does the iPad3 support external monitors, allowing you to scan across two screens?

    Does the iPad3 support external monitors, allowing you to scan across two screens?

    Some apps, such as Keynote, support different displays on the iPad screen and an external display. The iPad does not span it's "desktop" across screens, though; it only mirrors.
    Regards.

  • Where Are the Drivers? Envy 15t-J100 Touchsmart

    If I do a search for drivers for my laptop it shows nothing. HP ENVY TouchSmart 15t-j100 Quad Edition Is this normal? Does HP sometimes take down divers for a computer? About the only thing I can think of why they don't have anything up is because of Windows 8.1??

    It certainly doesn't look as if HP follows thru because there are still no drivers posted as of July 2015.  I too am looking for the drivers to my laptop.  Are they trying to force me to pay for support?Paul_Tikkanen wrote:
    Hi: I have reported the issue to HP. There is a support and driver page, and a drop down menu to select W8.1 but there are no drivers listed, just a link to order a recovery disk. http://h10025.www1.hp.com/ewfrf/wc/product?product=6521367&lc=en&cc=us&dlc=en&task= 

  • Help me recovery HP Envy 15t-j100 plz

    Hi,I'm in a big trouble after reinstalling window 8.1 . My laptop hasn't worked lately And then , I can't log in my laptop . I try to recovery but i have trouble with it I can't choose option " Minimized Image Recovery " and " System Recovery "  I just can choose option " Microsoft System Restore " and I have no restore points to restore  Are there any ways to fix this problem ? Plz help me to solve it . Thank you so much    

    Hi @yousof ,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you accidentally spilled water on the notebook and need to replace the hard drive due to this.  You did not create your recovery CDs.
    I know you stated you cannot order online as you are not currently in the states.
    You did not state which exact model of ENVY TouchSmart 15t-j100 you have so I just chose one.
    Here is a link to Order software and driver media.  If as you state you are unable to order, because you are out of the United States here are two options for you to consider.
    If you know someone in the United States that could order  it for you and  then have it shipped to you  or call HP support to inquire about obtaining the recovery USB.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Envy dv6 to 2 external monitors?

    I have an HP Envy dv6 laptop, and 2 external monitors. I want to hook the laptop up to be able to use the two external monitors - instead of 1 external + laptop. Is there a way I can do this? Please advise.

    Hi,
    Hope the following video gives you an answer:
       http://www.youtube.com/watch?v=wg_ZfQHh2fE
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Satellite M50-156: How can I change resolution for my external monitor?

    Hi,
    I bought an exernal monitor for my laptop M50-156 which has a resolution of 1920x1080.
    But the problem is that such a resolution is not available in the display settings of my computer!
    I tried to update the graphic card and chipset, but the max resolution I have is 1280x1024!
    So my external monitor cannot display properly :( Did anybody have the same problem?
    Please help.. Thanks.
    Beb

    > But the problem is that such a resolution is not available in the display settings of my computer!
    The resolution is not available and this says everything!!! Its not possible to choose this and you will have to use another resolution!
    There are two reasons why your favorite external resolution is not available:
    1) the graphic card chip does not support this
    2) or the graphic card driver does not contain this resolution.
    In your user manual you can find all supported and available external resolution
    But I assume the 1920x1080 is not supported

  • MSI GX640 - Can it do 2560x1440 on an external monitor?

    Hello all,
    I'm considering to buy a 27" monitor with a 2560x1440 resolution (either the Hazro HZ27WC or the Dell Ultrasharp U2711, but I start spending money I need to know if the MSI GX640 can do this?
    The graphics card seems to do only 1920x1200, however I know the HDMI and DVI signals are the same and the maximum DVI resolution is listed as 2560x1600. Is there any chance that the laptop is capable of doing 2560x1440 over HDMI?
    I've also read that some owners of laptops with a NVIDIA card managed to push out 2560x1440 over VGA by 'hacking' the drivers and lowering the Hz as to increase the resolution (which shouldn't be a problem with TFT's).
    Anyhow, anyone got this laptop hooked up to a monitor with a resolution higher than 1920x1200?

    Hi rkenji,
    Try using the steps in the following article to help you troubleshoot this issue with video on your external monitor:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Brokan hinge on Hp Envy 15t-j100

    I have a Touch smart Hp 15t- j100 quad edition cto notebook and have just noticed that the right hinge is loose or brokan and I hear something rolling around in the inside of it. sounds small like maybe a screw or something? I've read many post about people with my model laptop are having the same trouble.  Can you help Hp says my warrenty is up but when I check on my warrenty status is says its still in warranty?
    This question was solved.
    View Solution.

    @Bigfoot468 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Can't see video playing through external monitor

    Well it use to work, seeing the Timeline play through my external monitor.. Here's what I have, FCP 4.5 HD hooked up through Firewire to a JVC tape deck which in turn is hooked up through RCA cables to a small tv set. I have the following setup in FCP Audio/Video settings>Device control Preset: Firewire NTSC and Video Playback: Apple firewire NTSC. I've unplugged the Firewire cable a couple of times and still can't get the Timeline to play in my external monitor. Here's the funny part if I go to Log and Capture I can control the JVC deck and see my mini DV not only play in the Log and Capture window but also in the external monitor. I would think I won't be able to. I must be forgetting a setting in FCP to see my Timeline play in my monitor but for the life of me I can't remeber. Appreciate all sugestions!
    G5 dual 2.5   Mac OS X (10.3.9)  

    Randy,
    Many thanks. I really should not use keyboard commands that I'm not sure about.! I probably hit cmd F12 instead of just plain old F12 to do a superimpose. I'm going to start a list of all these settings I need to check. Someday I hope to be able to help someone figure out a problem. Again thanks for taking time to help me out and keeping a few more hairs on my head.
    Loran
    G5 dual 2.5    

  • FAQ: Does SpeedGrade CC support external monitoring?

    Yes, SpeedGrade CC includes Adobe Mercury Transmit for external monitoring via selected third-party video I/O cards on Mac OS and Windows®.
    More info:
    Set up dual displays in Adobe SpeedGrade CC
    Setting up Mercury Transmit in Adobe SpeedGrade CC

    The Macbook does support dual monitors. I used it on the last presentation I did back in November of last year. It worked great. I did use keynote for that. Just make sure you set it up in the options of the slide show and it will work.
    Hope this helps.

  • Can anybody help me ? preview (external monitor)

    Hey Guys:
    I need to preview in real time my HD 1080i work in an external monitor I am not sure with card should I purchase. I have a Viewsonic 1920x1080.
    I know that the most used card are balckmagic and AJA Kona models but I have read some complaints about both.
    Firstly I was after Intensity Pro (blackmagic) but it seems that it does not work well with HD output.
    Then I searched info about DeckLink (Blackmagic). It seems it works ok but not more reference than oficial web.
    Finally somebody told me that AJA Kona cards work really well but I don't know which model will be the proper for monitoring my work in realtime.
    Can anybody help me with this ?
    Thanks
    Andres

    Hi Andrew07,
    With my Mac Pro 8 core, AJA KONA LHe SDI card using Final Cut and a fibre channel disk array I can capture and play back 1080 HD footage, no problem. (I have also used Blackmagic cards as well)
    With After Effects if I have my External Monitor set to 1080 and I try and RAM preview a 1080 composition I can only achieve a frame rate of about 15 fps. If my external monitor is set to normal SD and the composition at half res I can then preview in real time. But that is not Full res HD.
    If I render the RAM preview to disk I can then play that in Final cut in realtime at full res
    So you have to work around AE as it just can't pump out that much data quickly enough, but I do HD graphics everyday using AE and it does work just not quite as well as I would like ...
    Hope this helps

Maybe you are looking for