Can HP ENVY 23-d030 be upgraded to i7-3770s

Although according to the specifications, the HP ENVY 23-d003 can't be upgraded to a i7-3770s processor, the HP ENVY 23-d010a uses the same motherboard and is sold with the i7-3770s processor as standard. Since both use the same motherboard, the i7-3770s has the same TDP (65W) as the i5-3330s, and both were released during the same month/year, it would seem that an upgrade is possible.
HP ENVY 23-d030 Specifications
HP ENVY 23-d010a Specifications
The only major difference I see between the two is that the d010a comes with a 180W brick instead of 150W brick to support the NVIDIA GeForce GT 630M mini pci express mxm graphics card (33W) that comes standard with the d010a.
If the d030 can be upgraded, what would be even more tempting would be to upgrade to the i7-3770 at 77W with even more processing power (if the i7-3770s works, then the i7-3770 should also work if there is enough available power in the brick). I probably wouldn't spend $300 for the I7-3770s or i7-3770 since the system really isn't a gaming system even if it had the GT 630m graphics card so my interest is primarily curiosity.
Any opinions? 

Hi,
Motherboard supports the following CPU's:
Motherboard supports the following processor upgrades:
Processor TDP
Intel Core i3-3xxxT (Ivy Bridge) Dual Core
up to 35W
Intel Core i3-3xxx (Ivy Bridge) Dual Core
up to 55W
Intel Core i5-3xxxT (Ivy Bridge) Dual Core
up to 35W
Intel Core i5-3xxxT (Ivy Bridge) Quad Core
up to 45W
Intel Core i5-3xxxS (Ivy Bridge) Quad Core
up to 65W
Intel Core i3-2xxx (Sandy Bridge) Dual Core
up to 65W
Intel Core i3-2xxxT (Sandy Bridge) Dual Core
up to 35W
Intel Core i7-2xxxS (Sandy Bridge) Quad Core
up to 95W
Intel Pentium G6xx (Sandy Bridge) Dual Core
up to 65W
Intel Pentium G6xxT (Sandy Bridge) Dual Core
up to 35W
Intel Pentium G8xx (Sandy Bridge) Dual Core
up to 65W
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Can hp ENVY 15 J 126TX GRAPHIC CARD BE UPGRADED

    can hp ENVY 15 J 126TX GRAPHIC CARD BE UPGRADED?it has a nvidia gt740 and i want to maybe upgrade it to something better like GeForce GTX 780M or gtx770.help pls

    Definitely not,
    Manual:
    http://h10032.www1.hp.com/ctg/Manual/c03943414.pdf
    Go through page 22, 64, 65
    Graphic card is soldered in to the board & also none of the cards you mentioned is supported by the system.
    Regards,
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • I have a 3gs and just updated my ios from 4.1 to 6.1.  But I can't activate it after the upgrade. heeeeelp!

    I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. what to do?

    joycesalvador wrote:
    ... But I can't activate it after the upgrade. what to do?
    See this discussion.
    https://discussions.apple.com/message/21189708

  • Can't print in PSE11 after upgrading to windows 8.1

    I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

    I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
    Tracy Ferreira 2607 Woodruff Rd.
    Suite E-126
    Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com  
          From: hatstead <[email protected]>
    To: Tracy Ferreira <[email protected]>
    Sent: Tuesday, March 10, 2015 1:58 PM
    Subject:  can't print in PSE11 after upgrading to windows 8.1
    can't print in PSE11 after upgrading to windows 8.1
    created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I can't update my apps after upgrade to iOS 6...?

    I can't update my apps after upgrade to iOS 6

    Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
    Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
    Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

  • Can anybody tell me how to upgrade my iphone 4 from 4.2.1

    can anybody tell me how to upgrade my iphone from 4.2.1

    Connect your iPhone to the computer with which you normally sync and
    use iTunes to update to iOS 6. Future updates can be done over the air
    using only a wifi connection.

  • Can I use iCloud storage to upgrade my 4s to ios6?

    Can I use iCloud storage to upgrade my 4s to ios6?

    Click here and see the bottom of the page.
    (114313)

  • Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

    Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

    4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
    If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
    You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
    Once Disk Utility loads, do the following:
    1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
    2 - Click the 'First Aid' tab
    3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
    4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
    5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
    You should boot straight into the system partition when complete.
    Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
    If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
    Hope that helps.

  • Can't to connect WiFi after upgrade to 10.7.1

    My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

    My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

  • I'm trying to update iPhoto 7.1.5 to current versions so I can get my photos onto iCloud to access from my iPad.  I can't seem to find an upgrade route that will work?  Any suggestions?

    I'm trying to update iPhoto 7.1.5 on my old iMac (running  10.9.5) to current versions so I can get my photos onto iCloud to access from my iPad.  I can't seem to find an upgrade route that will work?  Any suggestions?

    For Mavericks you need to upgrade to iPhoto 9.5.1.
    You cannot buy this version from the AppStore, since the current version is iPhoto 9.6, and that requires Yosemite. The easiest route for you would be to upgrade to Yosemite. Then you can simply buy the newest version of iPhoto from the App Store and can use iCloud Photo Library (iCloud Photo Library beta FAQ), once it has been release for the Mac as well early next year.
    If you want to stick with Mavericks, you'll have limited iCloud features, only the Photo Streams  (iCloud: iCloud Photo Sharing FAQ), but no iCloud Drive (iCloud Drive FAQ) and iCloud Photo Library.  And to upgrade iPhoto you need to buy an iPhoto '11 installer. It comes as part of iLife '11. You can try to buy a boxed version from Amazon or try to find it at eBay.  Once installed on Mavericks, download the iPhoto '11 updaters from the apple Support Downloads page.

  • I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

    I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

    Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post.  I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
    https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

  • I have seen so much response about the Mountain Lion update slowing down computers.  I am updating from Mac OS x 10.6.8.  What can I do to ensure the upgrade will go fine?  Do I unplug my external hard drive before installing, or keep it plugged in?

    I have seen so much response about the Mountain Lion update slowing down computers.  I am updating from Mac OS x 10.6.8.  What can I do to ensure the upgrade will go fine?  Do I unplug my external hard drive before installing, or keep it plugged in?
    Also, I have the 08 version of iWork. Will this cause problems for the update?  Can I update this AFTER I update the processor?

    Welcome to Apple Support Communities
    There's no reason to think that Mountain Lion will slow down your Mac. Just make a backup of your data before upgrading with Time Machine > http://support.apple.com/kb/HT1427
    Also, check that your apps are compatible > http://www.roaringapps.com Upgrade them to a compatible version or delete them before upgrading.
    The external drive won't make the OS X Mountain Lion installer fail, but it's better to unplug it during the upgrade.
    iWork '08 is compatible with Mountain Lion. iWork '09 includes OS X Mountain Lion features and can be purchased at the Mac App Store.
    To upgrade to OS X Mountain Lion, I recommend at least 4 GB of RAM. You can check how much memory you have in Apple menu > About this Mac

  • What can I do about this: After upgrading to firefox 6, I get this error. TypeError: Components.classes[cid] is undefined???

    What can I do about this:
    After upgrading to firefox 6, I get this error.
    When I click to open Firefox, A box open with the following error:
    JAVASCRIPT Application
    TypeError: Components.classes[cid] is undefined?
    After I click close on the box, then Firefox will start. I really just want to get the error fixed so that when I want firefox open, I don't have to see this box anymore.

    You need to figure out which add-on is causing that error and disable it until the developer of that add-on fixes it. There may be an error message about that in the Error Console, accessed through the Web Developer menu item or through {Ctrl + Shft + J}.
    Also see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Can i use facetime if I upgrade from Mac Os 10.8 to lion?

    Can someone tell me if it's possible to use face time on my mac book pro after this update? Alss Icloud?

    can i use facetime if I upgrade from Mac Os 10.8 to lion?
    Your question is backwards, we must assume that you want to upgrade from Lion to 10.8.

  • Can't purchase Mountain Lion.  Upgraded my Macbook (memory and OSX).  I have a black Macbook (2009) will it work?

    Can't purchase Mountain Lion.  Upgraded my memory and OSX.  I have a black Macbook (2009) will it work?

    The Black Macbook was for Sale between 2006 and 2008.
    http://en.wikipedia.org/wiki/MacBook
    To Upgrade to Mountain Lion... Your Mac must be one of the following models:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)

Maybe you are looking for

  • How do I create a business card on my MAC?

    I used to be a Windows user and everytime I try to do something I knew how to do in windows I can't figure out how to do it in MAC. Can someone tell me how to create a business card or find a template to create one? I've tried to find the anwser ever

  • Process For Electricity Bill Payment in SAP

    We need to deploy an automated process for electricity bill payments for a customer. What is the best practice that could be followed to automate electricity bill payments where the electricity service provider just auto-debits the customer based on

  • Exceptions  - javax.transaction.HeuristicMixedException In Logs

    Using Oracle BPM 10.3 MP2 Enterprise Edition Version: 10.3.2 Build: #100874. This exception is coming up in weblogic console logs. ####<Apr 29, 2011 8:14:52 AM CDT> <Error> <JTA> <fada1wap29> <BPM-CNM29> <BPM Directory Polling> <<anonymous>> <BEA1-1E

  • Java.exe error While installing Oracle Lite 10g

    Hi, Am getting "Java.exe has encountered a problem and needs to be close" Error singature AppName: javaw.exe Appver:0.0.0.0 ModName:ig4dev32.dll. Here my env variables JAVA_HOME:C:\Program Files\Java\jdk1.6.0_17 PATH :C:\Program Files\Java\jdk1.6.0_1

  • Java.sql.SQLSyntaxErrorException: ORA-00933: SQL command not properly ended

    Jdeveloper 11.1.1.6 WLS 10.3.5 The screen in our application polls at a fixed interval, The screen renders properly and the poll too works good. but intermittently we get the error below. and there will be no data in the screen. and if reload the scr