Can HP SW supplied with Officejet 6110 be used with Rosetta to solve scanning problem

Snow Leopard will not recognize the HP Officejet 6110 AIO scanner. Apparently HP Director is not provided with the driver. Can this be rectified by loading the app from the disc supplied with the AIO with Rosetta in place?

HP Support indicates that the current driver is 1.2. When I got the new computer a few weeks ago I updated the driver for the 6110 to 1.2 so I should be current. HP Support indicates that scanning is not supported for this AIO.

Similar Messages

HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

Can't print from my OfficeJet 6500A Plus using my HP Probook laptop with Windows 7

I have a new laptop HP ProBook Windows 7. I understand that Windows 8 or parts of it were removed prior to the sale of this laptop to me. It was new and purchased from Amazon via Circuit City. Since purchasing it, my husband and I are pulling our hair out trying to find out why it will not print. I use MyVerizon email and Google Chrome. Nothing prints. I've even tried registering with Yahoo mail. Nothing prints from there either. We have wireless. We've never had this problem before with any of our other laptops, all of which were HP. HELP PLEASE!!!! We called HP printers but they want to charge us because our printer is out of warranty. But our HP laptop is NEW. What the heck is going on?? I've registered with HP eprint. I've registered with Snapfish. All have been "confirmed." Yet I STILL can't print. Can anyone help?? My email is [email protected] THANK YOU IN ADVANCE!!

Hi there,
Sorry to hear you are having so many problems with your printer/PC.
Have you downloaded the most recent printer drivers for your new laptop? If not you'll find them here: Once your printer drivers are installed for your particular operating system, the printer should communicate with the laptop.
You mentioned something about parts of Windows 8 being removed from your Windows 7 laptop - I'm not sure if this is possible. My understanding is that it can't be a hybrid of two operating systems. It should be one or the other. Please verify what operating system is installed on your laptop before downloading the corresponding drivers.
How e-print works is that you register and assign an e-mail address to your printer ([email protected]). You then forward any e-mails or file attahments that you want printed to [email protected] and it will print from your printer.
I've included some information on getting started with e-print here
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Can't find "open with Rosetta"

So, I followed the Help directions - I closed Safari, ctrl-clicked it in the applications file, and chose Get Info. But in the General section, there is no "open with Rosetta" option. What do I do?

Hi Lisa
I was able to listen to content on the site via the free plug-in Flip4Mac. Download a copy and install it (it replaces Windows Media Player with Quicktime, allowing you to play Windows Media content through QT). Then restart Safari and try the site again.
See if that makes a difference.

My Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

my Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

Carlos-
Start by signing out and back in to see if it will see the subscription:
How to sign in and sign out of creative cloud (activate/deactivate)
If the apps are installed fine and close after launch see this link:
CC applications close immediately after launch
If the problem is something different, please let us know the error you see or what is happening on the screen so we can advise you on a solution
Pattie

Can somebody please help with Javascript. 2 small problems.

Hi. I have created a dynamic PDF form with fields. I have 2 problems that i am sure someone can help me with. (I can email anyone this PDF upon request).
PROBLEM 1. In this form I have a table (actually i think its a sub form) which has 3 buttons associated with it ('Add Row', 'Delete Row' and (Clear Row'). One button adds a new row. It works but it effectively duplicates the row (and all text fields/cells contained in the row) and places this new row at the bottom of any existing rows. What i require is for this button (the button gets duplicated along with the row) to place the new row immediately below the row from where it is clicked. ie, imagine you open the document, fill out the row (at this stage there is only one) and hit the 'Add Row' button. You now have 2 Rows (great), so you fill out the second Row. Now here is my problem, if you hit the 'Add Row' button on the first Row, a new 3rd Row is added to the bottom and not in between Row 1 and Row 2.
Effectively if you have dozens of Rows filled out and you need to insert a Row for an amendment, currently it cannot be done without deleting all Rows up to the point where you want to make the addition/insertion.
PROBLEM 2. Within this Row of text/numeric fields are two fields (called 'Rate' and 'Loading') where dollar amounts are entered. As the form is filled out (the Rows can be dynamically generated and it's fields manually filled out by the user) there can potentially be dozens of Rows in a completed form and, as each Row has many text/numeric fields, one can imagine Columns forming once there is more than 1 Row. At the end of the form, totals are automatically calculated. I have created a button to reset (erase) all amounts entered into these two specific fields (Columns) but in every Row. Unfortunately there is something wrong with my script syntax as this button does not do this. ( i want this facility as when the form, which is a budget proposal, is completed i need to send two copies - one to accountants with figures and logistics and a second copy to another department whom i do not want to give the figures, so i need the button to erase figures without having to clear each cell individually).
Any help that someone can give would be much appreciated.
Please email me at
[email protected] if you would like me to send you the file.
Cheers
Bradd

Send the form to
[email protected] and I will give it a go ....include a reference back to this forum posting.
Paul

Why can't mozilla work with yahoo to fix the problem of blank e mails?

Ok the only way i could read my messages in yahoo was to remove completely fire fox 8.0.1. and re-download fire fox 3.6.22, before i change back to 8 or higher, you need to work with yahoo mail, and others to fix the problem or it will happen again. sorry but your educated guesses about my current browser will not work until you fix he problem, because you want me to up date my browser, and that is my problem. you shouldn't make any guesses until you fully know what is going on. Stan

OK I read the link you posted and I tried changing dom.ipc.plugins.enabled;true and dom.ipc.plugins.java.enabled;true to false, and back to true again. Nothing changed and I could not really understand the majority of the thread you posted, I am not a coder and I have no idea what any of that stuff even is.
I don't know how to "allow the plugin container process in the firewall" I googled it but all I find is more cryptic forum threads and I have no idea what any of it means.
Am I supposed to be looking at settings in my commodo program?
I am doing my best here, and trying to solve the issue, I really appreciate all your help. It is very frustrating because I am not familiar with browser settings and technical things relating to plugin containers and out of process plugins.
Thanks again for all your help, but nothing seems to be working.

I cannot activate icloud foto. When I click on icloud the window comes up but in seconds the possibility to click to activate foto freezes. Can anyone help. I have spent so many hours trying to solve the problem.

i am so tired. Have used many hours now to find a way to get my fotos from my Iphone to my PC'er (windows 7). I have downloaded Icloud, but I cannot aktivate "foto" When I click on icloud there comes a window, where it seems that I can click on foto. But within sekonds the 3. (foto) possibility freezes and the vindow sort of changes: You can still se the choice "Foto" but it cannot be activated. Can anyone help, please!

Thanks for the link to your system.
You have a Combination BluRay and Surround System that includes WIRELESS Rear Speakers:
Rear wireless ready: Yes, 5.1ch wireless system included, 7.1ch wireless option with purchase of SH-FX67 + SB-HS100A
This could account for why the BluRay is generating interference with your wireless network signal.
You can go thru the process of changing the wireless channels and other changes to the Verizon Actiontec Router or hook up your old router which was working before you switched to FIOS.
FIOS has a Superior Product over any cable system and I would hate to see you leave over something that was out of their control.
By the way, looking at the picture of the rear connections for your Panasonic you would want to have an Optical Toslink cable go from the back of the Verizon HD Set Top Box (Optical Out) to the Optical In jack on the back of the Panasonic. This connection will provide you with Dolby Digital sound (If Broadcast by Channel) while you are watching TV. You may need to switch inputs on the Panasonic Remote to get this to work. You may also have an Optical Out jack on the TV that could be connect as well if you are using an HDMI Cable.
Your Verizon STB would be connected to the TV by either HDMI, Component, Composet, or Coax (Highest Quality to Lowest Quality). The HDMI would also provide sound to your TV so that it's internal speakers would work if desired.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Experience with trying to solve the problems from 2007-001 update

I am on a C2D iMac running 10.4.8, Airport card connecting to Buffalo Airstation.
Just to share what I've done yesterday
1. Did the archive and re-install OS X thing.
2. Updated firmware up to the point right before 2007-001 update (used ethernet cable to download, otherwise it would have taken forever.)
Result - connection doesn't drop any more, but wireless transmission speed is really slow.
3. Went into the Buffalo Airstaion config and changed the wireless channel.
Result - for about 5 minutes the transmission became as fast as my Core Duo MacBook on wireless (can do ~100kbps on file downloads etc.), and then it became slow again.
I will continue to try changing the channel sporadically over the next few days, but increasingly I'm starting to feel I shouldn't bother. I'm connecting via ethernet cable now, it's much faster (even when compared to when the wireless connection was at 100%). "All" that I have to live with now is the ugly cable being strewn around the house.
Be that as it may, I'm still pretty disappointed by the whole experience.

Hey anoblegee,
If you are having issues with connecting to your wireless router, then the first thing I would check is the settings on the router to make sure they are using the recommended set up. Take a look at that and also the troubleshooting Wi-Fi articles for both Mac and iOS devices.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/en-us/HT202068
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/en-us/HT202222
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/en-us/TS1398
Hope this helps,
-Norm G.

Can you e print with a officejet 8500 a909 using window OS

Can you eprint on a officejet 8500 a909 using windows 8 os

No,
The Officejet Pro 8500 (A909) does not support the ePrint feature regardless the operating system version. you may find the product capabilities listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=sg&dlc=en&lc=en&product=5070121&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Using HP Officejet 6110 and Officejet 6500 wireless issues

I have been using an HP Offciejet 6110 printer for a long time with an HP laptop running WINXP. I purchased a new HP laptop running WIN7. The WIN7 laptop will print to the 6110 in color only and doesn't allow the HP Imagimg Director software to work.
I recently purchased a new HP Officejet 6500 wireless printer and set that up to run off the HP laptop with WIN7 using the full software install. That seems to be working OK.
I then setup theold XP laptop using only the drivers for the Officejet 6500 so I could still use the Officejet 6110 from that computer and all the scanning and other features of the HP Imageing Director software. But it appears that the Officejet 6500 drivers have scewed up the Officejet 6110 software drivers on the XP laptop. How do I get this computer back to using the 6110 as normal (which was very useful) but be able to use the 6500 as an optional printer without all the 6500 features?

Hi dresdenron,
Thanks for clarifying the issue again. I was a bit confused.
How is the Officejet 6500 and Officejet 6110 setup on the Windows XP? (USB, Wireless)
Both models use completely different software. So there shouldn't be any interference even if the full software had been installed for the Officejet 6500. If both printers are connected by a USB cable, then the Officejet 6500 might have taken over the port and therefore causing the scan not to work.
What happens when you try to scan? (error message)
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
If the issue persists, uninstall and reinstall the Officejet 6110. This way it will be recognized on the new port assigned.
Uninstalling the Printer Software.
HP Officejet and PSC Full Feature Software and Driver.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
The Officejet 6110 is a Windows Update for Windows 7. There is no HP Imaging Director software available to run on Windows 7. Installing the Printer Software in Windows 7 for a USB Cable Connection.
Please provide in detail the results. If I missed anything, just let me know.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can somebody help me with this code?

Can anyone help me with this code? My problem is that i can't
seem to position this form, i want to be able to center it
vertically & horizontally in a div either using CSS or any
other means.
<div id="searchbar">
<div id="searchcart">
<div class="serchcartcont">
<form action='
http://www.romancart.com/search.asp'
name="engine" target=searchwin id="engine">
<input type=hidden value=????? name=storeid>
<input type=text value='' name=searchterm>
<input type=submit value='Go'> </form>
</div>
</div>
<div class="searchcont">Search For
Products:</div>
</div>
Pleasssssseeeeeeee Help
Thanks

Hi,
Your form is defined in a div named "serchcartcont", you can
use attributes like position and align of the div to do what you
want to do. But there are two more dives above this dive, you will
have define the height width of these before you can center align
the inner most div. If you are not defining the height & width
then by default it decide it automatically to just fit the content
in it.
Hope this helps.
Maneet
LeXolution IT Services
Web Development
Company

Slow resizing with fglrx/catalyst [solved]

Here is the solution I found and tested:
http://blog.jasondonenfeld.com/169#comment-404
I am running catalyst 9.8 using a Radeon 3850 and have had this re-size/maximize problem as long as long as I have used KDE4. To solve the problem I needed to modify a file in xorg-server. in the code directory it is called ./composite/compalloc.c. Here I commented out most of a function called compNewPixmap. Everything below these lines:
pPixmap->screen_x = x;
pPixmap->screen_y = y;
all the way down to (but not including) the last line:
return pPixmap;
After this I am running KDE4 with all desktop effects that I want and without any lag in resizing/maximizing.
I am running Gentoo, so I just updated the xorg-server source package file and put it back into the source repository, rebuilt the manifest and emerged it again. Voila!
.patch is:
--- composite/compalloc.c.orig 2010-01-14 14:50:25.000000000 +0800
+++ composite/compalloc.c 2010-03-25 19:45:36.507388810 +0800
@@ -487,64 +487,6 @@
pPixmap->screen_x = x;
pPixmap->screen_y = y;
- if (pParent->drawable.depth == pWin->drawable.depth)
- GCPtr pGC = GetScratchGC (pWin->drawable.depth, pScreen);
- * Copy bits from the parent into the new pixmap so that it will
- * have "reasonable" contents in case for background None areas.
- if (pGC)
- XID val = IncludeInferiors;
- ValidateGC(&pPixmap->drawable, pGC);
- dixChangeGC (serverClient, pGC, GCSubwindowMode, &val, NULL);
- (*pGC->ops->CopyArea) (&pParent->drawable,
- &pPixmap->drawable,
- pGC,
- x - pParent->drawable.x,
- y - pParent->drawable.y,
- w, h, 0, 0);
- FreeScratchGC (pGC);
- else
- PictFormatPtr pSrcFormat = compWindowFormat (pParent);
- PictFormatPtr pDstFormat = compWindowFormat (pWin);
- XID inferiors = IncludeInferiors;
- int error;
- PicturePtr pSrcPicture = CreatePicture (None,
- &pParent->drawable,
- pSrcFormat,
- CPSubwindowMode,
- &inferiors,
- serverClient, &error);
- PicturePtr pDstPicture = CreatePicture (None,
- &pPixmap->drawable,
- pDstFormat,
- 0, 0,
- serverClient, &error);
- if (pSrcPicture && pDstPicture)
- CompositePicture (PictOpSrc,
- pSrcPicture,
- NULL,
- pDstPicture,
- x - pParent->drawable.x,
- y - pParent->drawable.y,
- 0, 0, 0, 0, w, h);
- if (pSrcPicture)
- FreePicture (pSrcPicture, 0);
- if (pDstPicture)
- FreePicture (pDstPicture, 0);
return pPixmap;
apply the patch, rebuild xorg-server, done
my pkgbuild:
# $Id: PKGBUILD 72199 2010-03-13 19:40:06Z jgc $
# Maintainer: Jan de Groot <[email protected]>
pkgname=xorg-server-fixed
_pkgname=xorg-server
pkgver=1.7.5.902
pkgrel=1
pkgdesc="X.Org X servers"
arch=('i686' 'x86_64')
license=('custom')
url="http://xorg.freedesktop.org"
depends=('hal>=0.5.14' 'libgl' 'libxfont>=1.4.1' 'openssl>=0.9.8k' 'libpciaccess>=0.10.9' 'libxv>=1.0.5' 'pixman>=0.16.6' 'xcursor-themes>=1.0.2' 'xkeyboard-config>=1.8' 'xorg-server-utils' 'xorg-fonts-misc' 'xbitmaps' 'diffutils' 'xf86-input-evdev>=2.2.5' 'inputproto>=2.0')
makedepends=('libx11>=1.3' 'mesa>=7.7' 'xf86driproto>=2.1.0' 'xtrans>=1.2.4' 'libxkbfile>=1.0.6' 'randrproto>=1.3.1' 'renderproto>=0.11' 'xcmiscproto>=1.2.0' 'bigreqsproto>=1.1.0' 'resourceproto>=1.1.0' 'videoproto>=2.3.0' 'compositeproto>=0.4.1' 'scrnsaverproto>=1.2.0' 'xf86dgaproto>=2.1' 'libgl' 'glproto>=1.4.10' 'xorg-util-macros>=1.3.0' 'xineramaproto>=1.2' 'recordproto')
conflicts=('catalyst-utils<=9.2' 'xf86-input-calcomp' 'xf86-input-citron' 'xf86-input-digitaledge' 'xf86-input-dmc' 'xf86-input-dynapro' 'xf86-input-elo2300' 'xorg-server'
'xf86-input-jamstudio' 'xf86-input-magellan' 'xf86-input-magictouch' 'xf86-input-microtouch' 'xf86-input-palmax' 'xf86-input-spaceorb' 'xf86-input-summa' 'xf86-input-tek4957' 'xf86-input-ur98' 'xf86-video-vga' 'xf86-video-intel-legacy' 'nvidia-96xx-utils<96.43.14' 'nvidia-173xx-utils<173.14.21')
options=('!libtool')
provides=('x-server' 'xorg-server')
groups=('xorg')
install=xorg-server.install
source=(${url}/releases/individual/xserver/${_pkgname}-${pkgver}.tar.bz2
atifix.patch
xorg-redhat-die-ugly-pattern-die-die-die.patch
xserver-1.7.1-libcrypto.patch
xserver-1.7.1-gamma-kdm-fix.patch
xvfb-run
xvfb-run.1)
md5sums=('47adb90279d3383cca2740cb31cb6510'
'75e881ead14b0f41313eccf9d97c9d1a'
'1a336eb22e27cbf443ec5a2ecddfa93c'
'd03e03250bde69129d8b72382714b434'
'8eae23916552e609c36ecae1827c2e9d'
'52fd3effd80d7bc6c1660d4ecf23d31c'
'376c70308715cd2643f7bff936d9934b')
build() {
cd "${srcdir}/${_pkgname}-${pkgver}"
# Get rid of the ugly pattern
patch -Np3 -i "${srcdir}/xorg-redhat-die-ugly-pattern-die-die-die.patch" || return 1
# http://cvs.fedora.redhat.com/viewvc/rpms/xorg-x11-server/F-12/xserver-1.7.1-libcrypto.patch?view=log
patch -Np1 -i "${srcdir}/xserver-1.7.1-libcrypto.patch" || return 1
# http://cvs.fedora.redhat.com/viewvc/rpms/xorg-x11-server/F-12/xserver-1.7.1-gamma-kdm-fix.patch?view=log
patch -Np1 -i "${srcdir}/xserver-1.7.1-gamma-kdm-fix.patch" || return 1
# ATI compositing fix
patch -Np0 -i "${srcdir}/atifix.patch" || return 1
# Fix dbus config path
sed -i -e 's/\$(sysconfdir)/\/etc/' config/Makefile.* || return 1
autoconf || return 1
./configure --prefix=/usr \
--enable-ipv6 \
--enable-dri \
--disable-dmx \
--enable-xvfb \
--enable-xnest \
--enable-composite \
--enable-xcsecurity \
--enable-xorg \
--enable-xephyr \
--enable-glx-tls \
--enable-kdrive \
--enable-install-setuid \
--enable-config-hal \
--disable-config-dbus \
--enable-record \
--disable-xfbdev \
--disable-xfake \
--disable-xsdl \
--disable-static \
--sysconfdir=/etc/X11 \
--localstatedir=/var \
--with-default-font-path=/usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1 \
--with-xkb-path=/usr/share/X11/xkb \
--with-xkb-output=/var/lib/xkb \
--with-dri-driver-path=/usr/lib/xorg/modules/dri || return 1
make || return 1
make DESTDIR="${pkgdir}" install || return 1
install -m755 "${srcdir}/xvfb-run" "${pkgdir}/usr/bin/" || return 1
install -m644 "${srcdir}/xvfb-run.1" "${pkgdir}/usr/share/man/man1/" || return 1
rm -rf "${pkgdir}/var/log" || return 1
install -m755 -d "${pkgdir}/etc/X11" || return 1
install -m755 -d "${pkgdir}/var/lib/xkb" || return 1
# Needed for non-mesa drivers, libgl will restore it
mv "${pkgdir}/usr/lib/xorg/modules/extensions/libglx.so" \
"${pkgdir}/usr/lib/xorg/modules/extensions/libglx.xorg" || return 1
install -m755 -d "${pkgdir}/usr/share/licenses/${_pkgname}"
install -m644 COPYING "${pkgdir}/usr/share/licenses/${_pkgname}/" || return 1
the pre-built binary for x86_64 is here => http://rapidshare.com/files/367963537/x … pkg.tar.gz
Last edited by aqd (2010-03-25 13:58:55)

Or, you can install one of the already-patched servers on AUR:
http://aur.archlinux.org/packages.php?ID=35686
http://aur.archlinux.org/packages.php?ID=26687

I can not send my Note through email and it used to work. The same problem to send picture from iPhone message

Can't send Notes through email and it used to work. The same problem of sending picture from iPhone message. Did the reset twice but still not working

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can HP SW supplied with Officejet 6110 be used with Rosetta to solve scanning problem

Similar Messages

Maybe you are looking for