Can HR Administrator enter timesheet for employees on ESS ?
Hi Experts,
I would like to know if HR Administrator can enter timesheet for group of emloyees at one time on ESS under HR Administrator service ? If yes, than how ?
Would appreciate your prompt response ?
Regards,
Aashish
Dear Friend
Really need ur help as we are upgrading from 4.7 to ECC6.
Our client want to implement tiem sheet. Request you to provide gudiance wheher CATS i.e CATSRegular orESS timesheet would be useful.
if would be great if u could provide a kind of advantages adn disadvantages of both.
Suitable points would be rewarded
Sam
Similar Messages
-
I want to create RFC FM to enter data for employee in table pa0001
hi everyone,
i want to create either a RFC FM or a BAPI to enter employee data in table pa0001.
is there any other way to enter the employee data?
so plz help me by sending regarding RFC/BAPI creation.
thanx in advance.
from
jigar bhattHi jigar,
1. HR_INFOTYPE_OPERATION
2. This is the FM to put data
in infotype 0001 (pa0001 table)
as well as other infotypes also.
3. But this is a simple FM
(not rfc enabled)
4. For your requirement,
u can create a Z FM,
which is rfc enabled,
and inside this Z fm,
call the HR_INFOTYPE_OPEARATION
5. Also consider the parameters of this FM,
while defining your z FM.
regards,
amit m. -
OTL Timesheet for Leavers - Terminated employees
Hi,
I am trying to enter timesheet for a leaver/terminated employee.
When I query the employee it is not showing up.
Any idea, if there is any profile option or anything to set up to view ex-employees?
This is happening with all terminated employees.
Kind Regards
BashirDear Bashir,
It depends upon a preference (Self Service Timecard Status that Allows User Edits - set it to Assignment up to Final Termination) and on the Final Process Date.
Regards
Giuseppe -
Quick pays for employees that have a direct deposit payment method?
Can you perform quick pays for employees that have a direct deposit payment method?
Dear User,
You can perform the activity, only pre-requisite is the the given employee should have a Direct Deposit Payment Method associated with him.
So, when you perform Quickpay and Quickpay-Prepayment, it will take the Direct Deposit Payment Method.
Otherwise, if your payment method is blank for the employee, the Quickpay-Prepayment will take the default Payment Method defined in your Payroll (Generally this is Cheque or Cash)
Regards,
Ameya -
Hi Team,
We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
Please suggest how to do this.
Thanks,
RaviHi Rajesh,
Thanks for the reply...
We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
Thanks,
Ravi. -
In R12, can payroll user enter expense report for employees via web-based?
Hi,
In R12, can payroll user enter expense report for employees via web-based screen? Previously in 11i, it can be done via the Expense Report forms.
Appreciate advise on this.
Thanks in advance.
Regards,
Shiau ChinHi Anne,
Please see page 42 of the [url http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120oieig.pdf]iExpenses Implementation and Admin Guide for R12 . If you are unable to enter the ID as per the guide, I would suggest raising an Service Request with Oracle Support.
Cheers, Pete -
Authorization to allow employees to enter time for themselves
Hello gurus,
We included the functionality to allow employees to enter time for themselves in a role that all users have assigned. This worked fine until no long ago. The SU53 report didn't help. It displayed as missing values for P_ORGIN, which was not active from the begining. After more investigation it worked only after we added value 'U' (update) to AUTHC field for P_PCLX, unless timesheet entries are not transfered. Does somebody experienced such a problem before?
Here are the original values when used to work (tcode CAT2):
P_ORGIN = inactive
P_PERNR:
AUTH = *
INFTY = 0000-0002, 0007, 0315, 0316, 2001-2003, 2005-2007, 2010
PSIGN = I
SUBTY =*
P_PCLX:
AUTHC = R
RELID = B2, PC
New values:
P_ORGIN = inactive
P_PERNR:
AUTH = *
INFTY = 0000-0002, 0007, 0315, 0316, 2001-2003, 2005-2007, 2010
PSIGN = I
SUBTY =*
P_PCLX:
AUTHC = R, U
RELID = B2, PC
My concern is that I am not sure what else a user can perform if I'll grant him with value 'U' to AUTHC field for P_PCLX.
Your help will be appreciated.
Thank you,
GinaHi Gina
With a U you will grant access to update the HR Cluster tables in area B2 and PC. In order to investigate further check table T52RELID.
Normally this shouldn't be needed for employees to maintain their data i CATS, but perhaps you have activated some customizing, where the data is updated immediately.
Regards
Morten Nielsen -
Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
Can someone HELP? I'm afraid I might do something wrongWhat backups do you have?
-
HR administrator to process MSS- PCRs for employees
Hello all,
We are on SAP ECC 6.0 , EP 7.0 Sp15 and MSS version 600 SP13 .
We are using MSS Personnel change requests like separation , termination etc.
We want HR administrator to intiate PCR for all employees as managers do for employees in their respective org. units they
are heading .
We know that in HCM P&F , HR admin can initiate Forms for employees .But since we are already using PCRs , we cant switch to HCM P& F .
Is there any way we could meet this requirement with MSS PCRs .
I feel the only way is if HR admin is at CEO position and is heading all org units , he can process PCRs for all employees .
But this doesn't seems to be workable .
I searched the forum and could find out that we can go for customized application .
any pointers are greatly appreciated.
Thanks,
SahibaYou can assign manager, Hr admin role as well, and have a custom evaluation path which will populate the
employees he intends to perform the services! -
Enter time for terminated employees in cats
I am trying to enter time for terminated employees in cats during their active period,but I got "An error occurred on starting the workflow", I checked employee's master data, and standard workflow being triggered ws2000460, everything seems to be fine,any help?
the error I got right after I tried to submit time entry in cats: "An error occurred on starting the workflow", upon the time time sheet is being submitted, std workflow20000460 gets triggered, but this error prevented it from being triggered. so I deleted this employee's termination action, and his active status got extended to 99991231, then I submitted time for him again, no workflow error, everything seemed working. My guess is that termination action can prevent from submitting time in cats. so I hope any time management expert or workflow expert could verfiy my assumption.
-
I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but auto function does not see them. Went back and put a small split in the timeline in fcp and exported to mpeg 2 again and auto function does not see that either? Manual msays to manualy enter split poind in DVDSP but can't find any way to enter that split point in DVDSP? How can I manualy enter a split point in DVDSP 3 or 4?
Elizabeth/Roger Cook FilmsThis is definitely not the behavior I see. When I left click it adds a marker,
When I right click, I see the following
Do you have any OS hacks installed on your computer or have you changed the mouse behavior in system preferences: mouse? If not, I'd suggest you run digital rebellions preference manager and reset your dvdsp preferences.
https://discussions.apple.com/docs/DOC-2491 -
My younger sister executed my firefox just at this afternoon(she originally use IE), and she saw something that can't be seen. How can I set a password for firefox so that everyone have to enter the password before executing firefox?
Also see this for an English version of Profile Password:
*Profile Password: http://nic-nac-project.de/~kaosmos/profilepassword-en.html#PPF
It is an extension to protect the profile with a password, but being an extension that protection can easily be bypassed by starting Firefox in [[Safe mode]].<br />
So do not rely on it.<br />
If you want to protect content then you have to use methods supported by the OS like a separate user account with a password or an encrypted file system. -
We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.
Anyone any ideas to help please?
-
Can't get Administrator Privileges/Rights for Local Account in Administrators Group
I'm using a Custom Command Shell, and for now just booting to cmd.exe. I've done the following:
1) Added a LocalAccount under UserAccounts/LocalAccounts (pass 7) with Name, DisplayName, Password, Group
2) Entered "Administrators" as the LocalAccount/Group (yes, it's definitely spelled correctly.)
3) Set AutoLogon/Username to the Username created in Step 1, Enabled, LogonCount 9999, Password as per Step 1
4) Added the "Application Security" package and set EnableLUA=False.
The system boots after install, and it successfully logs in automatically to the command prompt. However, the user DOES NOT have Administrator privileges. For example, when trying to run Regsvr32 from the command prompt, I receive the following error message:
"dllregisterserver failed with error code 0x8002801c," which indicates some sort of privilege/rights issue.
At the command prompt, when I type Net User LocalUserWhoShouldBeAdmin, I get the following:
Local Group Memberships
Global Group Memberships *None
Whereas when I type Net User Administrator, I get:
Local Group Memberships *Administrators
Global Group Memberships *None
What must I do to successfully give the local user Administrator rights?Jamster,
I figured out the solution, but I'm not sure your problem is the same...
In my case, the problem was that the LocalAccount/Name was the same as the ComputerName. As a last resort, all I did was change the LocalAccount/Name to something other than the ComputerName, and voila, after re-installing the image the local account was
suddenly a member of Administrators. Crazy... you'd think they'd be able to tell the difference between the ComputerName and a local account name! In case anyone's wondering, it has nothing to do with the length of the local account Name (I tested that.) -
I keep getting an annoying pop up for mail "Enter password for account "SBC." I enter my password but it still pops up. But I can still get my mail when I click on "Get mail." I called ATT and they said they are aware of the problem with Mac users and that I have to update my Mac Mail server program. Anyone know how I can do this? They want to charge me.
RE: "Mail, Contacts and Calendars preferences can't connect to the Yahoo account "bellsouth.net".
I recently changed my ATT U-Verse password…and Mail quit working… it wouldn't send or receive, Safari worked fine. I tried to send an email and a warning message popped up, "Mail, Contacts and Calendars preferences can't connect to the Yahoo account "bellsouth.net". In smaller type the next sentence read, "Enter the password for user [email protected]". The Password box was highlighted in blue so I just typed in my new password and my email message was immediately sent…but… I still couldn't receive messages AND the above "can't connect" warning message kept popping up on the screen at random.
Here's the Fix that worked for me. (The problem is that the new password was changed/updated on the keychains "smpt.att.yahoo.com" name-but- the name "pop.att.yahoo.com" didn't update to my new password).
Go to your Utility windows and select Keychain Access. Under Category select Passwords. Now check your password for your current (newest dated) name, "smpt.att.yahoo.com". Now check the password under, "pop.att.yahoo.com". Mine wasn't the same as my newest password found in my
"smpt.att.yahoo.com" window so I deleted my old password in the "pop.att.yahoo.com" window and typed in my new password, then selected "Save Changes". MY MAIL NOW WORKED…and no more warning messages cropped up. Problem was fixed.
Maybe you are looking for
-
Move rejected to trash changes aspect ratio of a clip
I just switched from iMovie HD to iMovie '11. I imported all old projects that I did not yet work on into the new version. This worked fine and I created my first movie successfully. For the current movie I have a lot of raw material in the format of
-
QuickTime Updates Steal File Associations
Today, QuickTime wanted to install updates to itself ... so I clicked "Sure, go ahead". And then I noticed that files which had previously been associated with Winamp were now associated with QuickTime. In other words, QuyickTime hijacked my file ass
-
Installation of BI Content Add Ons
Hi, Can anyone tell me the time duration BI Content Add Ons take to install in SAP BI for first time completely? Thanks in advance, Regards, Kannan
-
Using File I/O to Reformat Java Source Code
Encountered another problem. Essentially, I have to create code that will take a file formatted with next-line braces and convert it to end-of-line braces. I thought of changing the delimiter (from /p(javaWhitespace)+ to "\\r") so that I can catch th
-
i bought an iphone 5 but no face time on it at all, and i made the update to 6.0.2 , and still i don't have it , there is a way to get it ?