Can https be enabled in guest account?

can https be enabled in guest account?

Airlines request that all devices be turned off during take-off and landing.
I turn Airplane mode on before powering my iPhone off when so instructed. When the announcement is made that devices can be turned on, when I power my iPhone on Airplane mode remains enabled. I can then turn on wi-fi only for wi-fi access.
I'm not sure how this can be anything other than a two step process, unless there is an additional Airplane mode setting that includes having wi-fi enabled.

Similar Messages

I can only connect to my guest account

For some reason I can only connect to my guest account. I need to get into the web interface to fix this but it doesn't seem possible from the guest ssid? or is it?

Hi, you will not be able to access the router's GUI if you are connected to the guest network because it's like you are connected to a virtual network. It is best to be connected to your main router's network so that you will be able to access the router's GUI.

Enable A Guest Account So We Could Save Restriction Settings

How about a setting that will enable at boot up an option to log in main user (admin) or Guest account? And in the main user's restriction settings allow you to configure what apps the guest account can access. Then all you would have to do is set that 4 character password prompt for main user and allow guest to log in without a password. Then depending on your restriction settings you could make this thing a little bit more secure for families and multiple users. Any app purchases would still be under main user and need a password. I think this is doable. So say we all! ?

I guess I don't see it as a personal device. Since it has the ability to replace what most users use a laptop for. iPhone's size was holding it back from being the netbook killer. Now we have the larger version the iPad. iPad's OS has already started of on it's own path from the iPhone OS. So why not just put some chrooted dummy guest account option in it. So the multiple user household can have some way to save restriction settings and protect the main account.
My kids (5 and 3)are very good with my old G4 iBook and 1st Gen iPhone. Although there was that one time my son pulled all the keys off the iBook and the iPhone has been dropped like a hundred times on the hardwood but it still works.
If iPad is going to be a wonderful tool to help educate my kids since I didn't have to show my kids how to work the iPhone. They just figured it out. I hope some good EDU apps come out soon.

Photoshop "can't use product under guest account"?

I just bought Photoshop 12 today, downloaded it and everything, and now that I'm going to start editing some photos it says "Cannot use this product under a guest account". I am the administrator account so I'm confused?
Has anyone had this problem? If so, what can I do? I would like to start using this ASAP, I have a lot of photos to edit and I just spent the money on this!!

You should really post in the PSE forum at http://forums.adobe.com/community/photoshop_elements
Did you activate and register it?
But this could also be an OS isue. You should state which you are using. Do a web search for permission issue on your OS.

How can i completely remove a guest account? from the login screen too?

Having difficulty removing my guest account. I've gone to system preferences and unchecked the guest account but it still appears upon computer boot up as an option. I want it completely off and not showing on the screen when turned on.

On your login screen, that's not a true "Guest" account. It's actually a security feature..your Mac will restart to a secured Safari-only version of the OS with access to the Internet...this enables you to find your Mac using iCloud. Thus, this should NOT be disabled.

Can I choose which hard drives the guest account has access to?

I have a Mac pro with 3 hard drives, the operating system is on one and private documents on another and the third one is a backup time machine device. If I enable a guest account so my housemate can use my mac can I restrict his access to the hard drive with my private documents on it? And if so how can I do this?
Thanks in advance

Start with http://hints.macworld.com/article.php?story=20060930150059172

Yosemite GM Candidate Installed - Guest account keeps being re-enable after reboot

Have the Yosemite GM Candidate Installed (been using 10.10 beta since about end of July). I've never had this issue prior to the GM Candidate.
I never enable the Guest account on the system (force login for a user, etc.). I disable the Guest account, reboot, and the Guest account is re-enabled and can be logged into. Disable it again, reboot - it's back.
Potential fix anyone is aware of?

We are not allowed to discuss beta software here; please refer to the FAQ and terms you agreed to (confidentiality clause). You will need to contact Apple and/or file feedback.

I want to disable my Guest account, but it doesnt work. It says it's disabled, while it isnt.How can I fix this?

I have disabled my Guest account, and while it says it's disabled it's still fully active and accessible in "safari mode". It shows up on startup next to my own account. How can I fully disable the guest account, and fix this bug??

Smichy I think you're getting the guest account mixed up with the new Guest user.
If you really want to disable it.... here you go:
Open System Preferences
Click on “Security & Privacy
Click the lock in the lower corner and type in your administrative password to unlock the control panel
Check the box next to “Disable restarting to Safari when screen is locked”
But I really suggest you don't, since it's for your own good. Why lose features like Find my Mac, etc?

Window NT Guest account enabled?

IS there another way to print a report across Windows NT domains, without enabling the guest account?

@V.K., Thank you for your help! That completely solved the problem. Now when I think about it, I remember changing the root password some time ago. I guess that's what have caused the issue.

Guest Account / Do I need to log off before someone can use this?

First of all, I'm not a technical expert . . .
I've enabled a Guest Account as per the Help instructions. Should that now appear in the Finder window, or somewhere else? Or do I need to log off as the main user before it will appear? If so, how do I log back on later? I'm usually the only user, so don't have to deal with logging in, etc.
Thanks!

Log out and it will appear as if your Mac is shutting down, a Log In widow will then open listing the accounts, yours and guest.
Just select which account you want to use, if you have set any password you will need to enter it.

Word 365 not lauching under administrator account but works under guest account

Hello,
Problem: Word 365 does not open and wants to repair itself. All other office programs work fine.
Strangely Word works fine under guest account.
Did the repair (brief, complete). Uninstalled office (with the FixIt and O15CTRRemove) and reinstalled it numerous times; went through the registry and removed all occurances of Office or Word and reinstalled office: no change. Safe mode or Winword /a don't
launch either.
I posted this question 9 months ago:
http://community.office365.com/en-us/f/172/t/213900.aspx (gave up word in the mean time). Paid $100 for "Premium MS support" and waisted 3 hours with no solution !!!!!
In browsing found something similar (unfortunately in French):
http://answers.microsoft.com/fr-fr/office/forum/office_365hp-word/word-a-rencontr%C3%A9-un-probl%C3%A8me-qui/375d2082-ca22-4839-bb1c-1962c3caf741. So I enabled the guest account and Word works fine in that account. The second solution about the Bluetooth
add-on did not work.
Do I have to go work under the guest account ???
What is the difference / problem ?
Thanks

Hi,
We have definitely heard your frustration, and we're thinking about ways to help better for you.
Would you like to share us which suggestions you have tried, except repair/ reinstall?
I reviewed your other thread, the event log is French. Thus, I translate it, the error message like:
"We're sorry, but Word has run into an error that is preventing it from working correctly. Word will need to be closed as a result. Would you like us to repair now."
If it is, please try the two methods:
Method 1:
a. go the path: C:\Program Files(x86)\Microsoft Office 15
C:\Program Files(x86)\Microsoft Office 15\root\Office 15
b. Right click on Winword.exe > Properties.
c. Click on Compatibility tab, uncheck the box ‘Run this program in
compatibility mode’.
d. Click on Apply and click on ok.
Similar issue:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/keep-getting-error-were-sorry-but-word-has-run/b9a014db-c4c6-46aa-95b1-679308735f66
Method 2:
Removed Abbyy Finereader
Similar issue:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/word-2013-will-not-start-even-in-safe-mode/8b2cb253-fb77-467d-863d-f62c20e9d403?page=2
==============
Then, if this issue still exists. I suppose this issue might be caused by the administrator account profile. Please try to re-create a new administrator account to test. If Word could works well with a new administrator account. We'd better check the original
administrator account profile and
repair it.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Creating Guest Account Crashes System Preferences

I recently replaced an old mac mini G4 with the newest low end mac mini, the 1.83ghz core 2 duo with combo drive model.
I restored everything to the new machine with my time machine backup. Unfortunately, the guest account didn't get restored, and when I try to enable the guest account, System preferences crashes, so in order to do anything I have to force quit system prefs. After force quitting system prefs, I am unable to open applications using the dock. I have to reboot the computer in order to get anything to work again, but somehow enabling the guest account just wont work, and always crashes.
What can I do to fix this?

It happened to me also, on my imac and my MacBook Air.
It seems that user account migration somehow confuses the "guest user" machinery, which totally trashes securityd which dies of sudden death and from then on nothing works on the computer.
The solution is to do the following in System Preferences:
0. Your system guest account must be disabled (it already is if you have the described symptoms).
1. Create new standard account with name "guest" and short name "guest".
IMPORTANT: short name must be "guest" - OS will suggest "guest1", but you must edit that into "guest".
2. Enable system guest account in System Preferences (check the "Allow guests to log into this computer" switch). It will work now that "guest" name is taken.
This action will create user account with short name "guest1" with all the properties of guest (clean-up after logout etc.).
3. Completely delete standard user "guest", which you created in step 1 (check "delete all data and folder now").
4. Disable system guest account (uncheck the switch).
5. Right-click on system guest account icon and choose "Advanced" or whatever (there is only one menu item anyway) and change short name from "guest1" to "guest".
6. Enable system guest account.
Voila. You now have working guest account (well, I have it, and hopefully you will, too)...
P.S. I am not sure whether you need to log-in/out/restart between steps. I remember I did some of that dance, but probably it is not necessary...

Strange behavior with System Preferences involving Guest Account

I work for a company that primarily uses macs and I have recently been asked to enable the Guest Account on all of them (as well as a general staff login). In doing this, I have come across at least one computer (they all run 10.5.5 or 10.5.6) where it seems impossible to enable the Guest Account. Here is what happens:
1. I open System Preferences, go to the Accounts pane, authenticate, and click on the Guest Account.
2. I check the option to "Allow guests to log into this computer" and a little busy sign shows for a second.
3. I click on another account in the list on the left.
4. When I click back to the Guest Account, the checkbox is unchecked. Also, the Guest Account does not appear in the fast user switch menu.
After tinkering around a little bit, I found that there was a "Guest" home folder in the Users folder. I thought that this was strange because I thought that this folder is created when you actually log into the guest account (I checked on another computer and found that this was indeed the case). I then deleted this "Guest" home folder and emptied the trash.
I again went through the same steps I did above (with a Finder window on the Users folder displayed) and found that when I check the box to enable the Guest Account, a "Guest" home folder appears in the Users folder. I deleted and repeated this process a number of times, all with the same result. I then began looking around for other occurrences of this problem.
At some point, I came across this discussion, which seemed to pose a possible solution: http://discussions.apple.com/thread.jspa?messageID=9176908#9176908
As suggested in that thread, I tried creating a standard user with a home folder by the name of "Guest" or "guest". I filled in all the fields but when I clicked on "Create Account", it seems to work and then goes back to the Accounts preference pane except that the account I just created +*is not there!*+ I then tried this while the "Guest" home folder existed in the Users folder and it brings up a window asking whether I want to use the current "Guest" home folder as the home folder for the new account. Even if I click OK, +*the account still does not appear.*+
Does anyone know what is going on here? The next thing I'll try is an archive and reinstall, but a quicker fix would be nice, since the former involves running all the updates again (we don't have current versions of the Leopard install disks).
I would be very grateful if anyone has an answer.
-Nik

As it turns out, the Guest folder behavior is actually normal, but I still have not figured out why the guest account still doesn't work. My next step will be to try a disk repair. I've repaired the permissions, but that didn't seem to help as far as I know. I'll also try reinstalling the combo updater to 10.5.6 (as suggested by a co-worker) and see if that does anything. Last resort is the archive and reinstall.

ISE Guest Account Lockout

Hi,
I would like to disable account lockout for ISE Guest accounts resulting from login failures. In the ISE, there is a setting for Maximum Number of Login Attempts (with values from 1-9) in:
        Administration>Guest Management>Settings>Guest>Portal Policy
Can someone tell me where or how account lockout can be turned off for Guest accounts in the local database of the ISE/WLC.
Many thanks.
Sankung

Answer: No, yet there is not way to completely desable this feature in Cisco ISE
ref: http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_guest_pol.html#wp1070066

FileVault 2 guest account is greyed out

Yesterday I performed a clean install of OS X Lion for my MBP (early 2011) had some kernel panics recently and I was told that it could be a software related problem. Anyway I installed all of the updates, switched on File Vault, Back to my Mac and everything's looking good except for I can't access the guest account. When booting there's no prompt for signing into the guest account and in system preferences the guest is greyed out.
Before my clean install I had File Vault enabled as well and there was a guest account I could log in to. I'm not sure what's wrong but I suspect a problem with Software Update. I already had to install several updates manually but am not sure if there's still something missing.
Any help would be appreciated.
mstrfcs

How to enable the Guest Account when...: Apple Support Communities
Why is Guest Account option disabled...: Apple Support Communities

Can https be enabled in guest account?

Similar Messages

Maybe you are looking for