Can i able to adjusted the time of my phone automa...

Can i able to adjust my phone time and date with the one which is in  my computer automatically.As soon as i connect my phone with my computer via  USB cable.
Model 3110 Classic.
Message Edited by shravan12 on 13-Sep-2009 09:12 PM

The phone's auto-update gets the time from the cellular network, if the network operator supports the feature (most do these days, I suppose).

Similar Messages

  • HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

    I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

    Thanks Roger W1,
    Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
    This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
    After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
    This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
    The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
    Thanks,
    Jay

  • Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

    I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
    Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

    Can you post an ipconfig /all from the server and the DC?
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • HT5252 I tried to change my metadata date and got this   Aperture was not able to adjust the date and time of the original file "01769_p_h13ajyrm4bm0944.jpg" because it is locked or you do not have permission to modify it.

    I tried to change the metadata date.  It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
    Unable to change original file.  Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
    Wassup?

    What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
    If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
    Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
    If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
    Regards
    Léonie

  • HT3919 In the past was able to adjust the memory for each individual application, my Illustrator CS5 appears is doesn't have enough memory to complete a particular project. How do I boost the amount of memory that Illustrator uses so I can complete my pro

    In the past I have always been able to adjust the memory of each individual application,
    my Adobe Illustrator CS5 appears that is doesn't have enough memory to complete a particular project.
    How do I boost the amount of memory that Illustrator uses so I can complete my project?

    With OS X, it automatically allocates RAM and it can't be allocated manually.
    What model Mac do you have and what OS X version is it running. Your profile shows a PowerMac and OS 10.6.8. A PowerMac can't run OS 10.6.8. It's max OS is 10.5.x
    How much RAM is installed in your Mac? You need to max out the RAM and close other open apps if you are having problems with Illustrator.
     Cheers, Tom

  • Can I adjust the time for each slide?

    I'm making videos out my own photos.
    I've figured out how to upload the photos, record a commentary, etc. but I need to adjust the time that each slide is shown. This is because the videos are how-to's, and some explanations are longer than others, and in that case the slide needs to stay on longer.
    I'm using iMovie 08 and can't upgrade because I'm still on OSX 10.5.8.
    Thanks!
    Gina

    There should be a Duration button at the bottom left of the photo thumbnail in your project. Click this button and you will see a dialog box where you can adjust the duration. Be sure not to check the box that say "apply to all photos".

  • HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Can't able to access the duplicate control?

    I have created the duplicate control in tabpage as shown in below code snippet. but i can't able to access the created object.
    Code Snippet
     private void button1_Click(object sender, EventArgs e)
                TabPage newPage = new TabPage();
                foreach (Control c in  tabControl1.TabPages[0].Controls)
                    Control cNew = (Control)Activator.CreateInstance(c.GetType());
                    PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
                    foreach (PropertyDescriptor entry in pdc)
                        object val = entry.GetValue(c);
                        entry.SetValue(cNew, val);
                    newPage.Controls.Add(cNew);
                tabControl1.TabPages.Add(newPage);

    Hi Carl,
    Thanks for your update.
    Now I got some idea. But I have one more issue. 
    During button click the I need all the properties in textbox in TabPage1 to the textbox in NewTabPage(refer above image). but later if we change in text in any textbox the replaced text should not reflects the other text.
    E.g: If textbox.text="Microsoft";
    during buttonclick i need the textbox in New Tab Page should be Microsoft. 
    later if I edit the text should not New Tab Page or TabPage1 the text should not reflects from one control to other.
    Regards,
    R.Senthil Kumaran
    Hello,
    I could get what you are dealing with now, and to get that done, I would recommend you use the following way.
    1. Add properties to UserControl, you could define the names of these properties with custom rules.
    public partial class UserControl1 : UserControl
    public UserControl1()
    InitializeComponent();
    public string StrTxtBox1
    get { return this.textBox1.Text ; }
    set { this.textBox1.Text = value; }
    2. Use similar way you shared and edit it to just copy the specific properties.
    TabPage newPage = new TabPage("NewTabPage");
    newPage.UseVisualStyleBackColor = tabControl1.TabPages[0].UseVisualStyleBackColor;
    foreach (Control c in tabControl1.TabPages[0].Controls)
    Control cNew = (Control)Activator.CreateInstance(c.GetType());
    PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
    foreach (PropertyDescriptor entry in pdc)
    if (entry.DisplayName == "StrTxtBox1"|| entry.DisplayName == "Location")
    object val = entry.GetValue(c);
    entry.SetValue(cNew, val);
    newPage.Controls.Add(cNew);
    tabControl1.TabPages.Add(newPage);
    In this case, if we have a lot perproties to copy, you could consider capture them by the custom rules you defined at #1 like this one.
    if (entry.DisplayName.Contains("StrTxt")|| entry.DisplayName == "Location")
    object val = entry.GetValue(c);
    entry.SetValue(cNew, val);
    Result:
    And if possible, you could consider using this way which just copies the Text , Location or any other property and we don't need to create any usercontrol.
    TabPage newPage = new TabPage("NewTabPage");
    newPage.UseVisualStyleBackColor = tabControl1.TabPages[0].UseVisualStyleBackColor;
    foreach (Control c in tabControl1.TabPages[0].Controls)
    Control cNew = (Control)Activator.CreateInstance(c.GetType());
    PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
    foreach (PropertyDescriptor entry in pdc)
    if (entry.DisplayName == "Text" || entry.DisplayName == "Location")
    object val = entry.GetValue(c);
    entry.SetValue(cNew, val);
    newPage.Controls.Add(cNew);
    tabControl1.TabPages.Add(newPage);
    Regards.
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Since installing Snow Leopard on my iMac, my incoming mail on Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

    Since installing Snow Leopard on my iMac, Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

    Sylvia,
    There is a Office for Mac Product Forums, if now one here is able to answer I'd recommend posting on that forum.

  • Selecting clips by timecode? Can I do this? The time code is backwards., Selecting clips by timecode? Can I do this? The time code is backwards.

    Selecting clips by timecode? Can I do this? The time code is backwards, it counts down instead of up (duration) like it should.  Selecting clips by timecode? Can I do this? The time code is backwards.  I have a video project where i need to select several clips based on their timecode.  I want to also sent the playhead to a exact spot on the video. Thanks.

    It is unfortunate, but there is only one way that the Time Capsule can connect to the BT Hub, and that is by using an Ethernet connection to the WAN port on the Time Capsule.
    That could be either by running an Ethernet cable from the Hub to the Time Capsule.....or......if that is not possible, then you might be able to use a pair of Ethernet Over Powerline (EOP) Adapters to send an Ethernet signal over the existing AC powerlines in your home.
    The theory with EOP is that you already have the wiring in place, you just need the adapters.  In practice, things do not always work as well as the theory might suggest, so if you decide to try a pair, it would be a good idea to understand the store's return policy in advance before you buy. BT might even offer these devices, so check with them first on this.
    If the EOP adapters do not work well, then your only option after that would be to move the Time Capsule close to the Hub and connect the Time Capsule using a normal Ethernet cable of any length that you choose.
    I read today that I can access my time capsules data via back to my mac from anywhere in the world.
    Back to My Mac (BTMM) assumes that it is the Time Capsule that will be the "main" router on your network.....not another router....which is the Hub in your case.
    Unfortunately, you should not expect BTMM to function correctly unless the Time Capsule can be set up as the "main" router on your network.....which is likely not possible in your case.  You would need to discuss that subject with the BT support folks.

  • Can I use iCloud as my library instead of using local storage?  Would I be able to synchronize the music on my phone? and make CDs out of the my music in the icloud using itunes?

    Can I use iCloud as my library instead of using local storage?  Would I be able to synchronize the music on my phone? and make CDs out of the my music in the icloud using itunes?

    Many thanks JEM24 for your help.  Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone  the actual cost of each additional  gigabyte of storage  to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.

  • Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

    Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
    iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

    Hello jst84,
    The following article may be helpful in getting your purchase to complete.
    Mac App Store: "An unknown error occurred (100)" when purchasing
    http://support.apple.com/kb/TS3637
    Cheers,
    Allen

  • Can I hard wire connect the time capsule to my iMac

    I have been told to not use wireless connections when iPhoto library is on external disc. Can I hard wire connect the time capsule external drive.  I have found nothing showing or telling me exactly yes or no. 

    how various devices on the network are connected is of no difference
    ethernet wired or wifi == no difference

  • HT1222 Last time I did an update...I lost most of my music...thousands of songs and had to reinstall them!!!!  I am scared as **** to do another update!!  I have radio shows to do and can't afford to spend the time with this.  Help anyone?

    Last time I did an update...I lost most of my music...thousands of songs and had to reinstall them!!!!  I am scared as **** to do another update!!  I have radio shows to do and can't afford to spend the time with this.  Help anyone?

    A bit late for this advice now, but hopefully you'll know what to do next time.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Can we able to see the Work Items status in the BPM Workspace

    HI,
    Can we able to see the work item status in the BPM workspace.
    For exampls, I have create the request as requester then it will go for approval.
    After sometime i login into the workspace can i able to see my request status(it mean where it is like approval1, approval 2)?
    Pls let me know, its possible in the BPM workspace.
    Regards,
    Anandh P

    Hello Anandh,
    You can utilse the filter option of the BPM workspace.
    When you filter the instances you can view the status of all the instances even if they are currently not assigned to the particular user.
    All you need to do is click on the show filter link.
    Select the process from the Filter by: combo box.
    Check the status boxes and click on apply filter.
    You will be able to view the instance even if it is not assigned to you.(Though you will not be able to work on it.)
    If you wish to give custom messages like "pending with HR" or "Pending with Admin" then you need to add a column by creating a project variable and mapping it to the custom view. Then these messages can also be shown on the instances.
    Hope ths helps.
    Regards,
    Jaydev Doshi

Maybe you are looking for