Can i able to put filter for my source flat file?

Hi all,
Please help me with the best practise of ODI.
My source is flat file and i want to put filter.
can i able to put filter for my source flat file? If yes, please help me with the best practise of applying filter.
Regards
Suresh

Hi ,
If you are trying to create at the Model -->Datastore ---> Filter ---> Insert condition
then it will not work for File technology . You will get " Invalid Format Description "
But you can specify a filter in the interface .
Just drop the column(s) from your flat file data store into the canvas and then specify the filter condition .
Thanks,
Sutirtha

Similar Messages

Not able to put reason for rejection at sales order level.

Hi Gurus,
I have an issue where I am not able to put reason for rejection for line item in sales order. It gives error as please delete the follow on document purchase order line item number 10. I have already deleted the line item in purchase order. Then tried but did not work. Tried by deleting the purchase requision item also but it did not work.
Tried to undelete the item from PO and then again tried to put reason for rejection but it could no worked out.
Please guide me what can be the solution.
Regards
Vinod

As far a I understand you created PO for line item
So first check whether GR is reversed or not for PO
Then mark this line item for deletion in PO and then in PR
Check if you have created any billing document for PO if so reversed that invoice
Also check if you have created any delivery for the Line item in sales order if yes then reversed the same
If you have Sales order related Billing, and if you have done billing reverse the same
If you have Delivery related Billing, and if you have done billing reverse the same
After reversing all docuemnts created for Sales order then only try to reject the line item
You can check table VBFA for document flow

1. Can we able to create GR for consubale without PO

Hi ,
I have two issues.
1. Can we able to create GR for consubale without PO - invoice should be done with some reference. no direct posting.
2. Can we able to create PO with Account assinment cat as "P or some other" and without WBS element ? at the time of GR i want to give WBS element.
Regars,
Anil

>
anil kumar wrote:
> Hi ,
>
> I have two issues.
>
> 1. Can we able to create GR for consubale without PO - invoice should be done with some reference. no direct posting.
>
> 2. Can we able to create PO with Account assinment cat as "P or some other" and without WBS element ? at the time of GR i want to give WBS element.
>
> Regars,
> Anil
1. If settings for automatic PO is on, yes its possible when you create GR, Po gets created automatically, or you do GR against other with movement type 501 which is without PO.
2. If you use P, then you need to enter WBS element. You can use U in combination with D = service, then you enter wbs at service entry time.
Edited by: Afshad Irani on Aug 13, 2010 11:26 AM

Can we use drop shadow filter for reflection of a n image

i just want to know can i use drop shadow filter for
reflection of a image if yes then how
if not then suggest me any other filter

"tausif d" <[email protected]> wrote in
message
news:gbsrbm$8ag$[email protected]..
>i just want to know can i use drop shadow filter for
reflection of a image
>if yes then how
> if not then suggest me any other filter
http://www.quietlyscheming.com/blog/components/tutorial-displayshelf-component/

I created an Apple ID but i can't able to use it for downloading applications from iTunes store on my 4s iPhone

I have created an apple id on my 4S iPhone. But i can not able to use it for downloading applications from iTunes store on my phone

can your computer?
can your browser ?
what error does it give you?

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Logical path for getting a Flat file from application server

Hi All,
We have loaded some .csv files to application server, what is the logical path we have to mention in the infopackage scheduler screen? please guide me how to give the path for getting a flat file from application server.
Thanks,
Sairam.

Hi Sairam,
I hope you know which location you have saved in the Application server.
Now if you go to the Infopackage and click on the "External Data" tab, there you will see Radio Buttons for
1) Client Workstation
2) Application Server
Choose the second radio button, then in the Field "Name of the File" you will be able to use the F4 help and browse AL11 transaction through this option. You can then choose the File.
Hope this helps
Regards,
Praveen.

Where can I find OIL PAINT filter for CC 2014?

Does anyone know if there's a downloadable OIL PAINT filter for Photoshop CC2014 since they took away that filter from the 2014 version? Is there a way to get the filter without going back to the previous version?

It was removed, you can only use it in the previous version: Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

Where can I get Oil Paint filter for Pixel Bender?

Hi, I had to reinstall my CS4 after a system disk crash, and now I cannot find free Oil Paint filter for Pixel Bender plugin. It is not included in a new version of the plugin available for download. Where can I download the old version or only the Oil Paint filter file to restore my working software configuration? (Photoshop Extended CS4, 64-bit)

It was removed, you can only use it in the previous version: Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

Can We able to Configure Ame for EIT

Hi Friends
Can Anyone Let me know that in the Oracle Hrms for the Extra Informations is there any Approvals...
i mean if we enable eits in the Self serivice pages can we able to configure the AME for EIT..
Thanks in advance

Hi again manoj;
Please also check below metalink notes which could be helpful for your issue:
Oracle HRMS Extra Information Types (EIT): General & Technical Information [ID 70122.1]
HRMS Approvals Management (AME) Frequently asked Questions (FAQ) [ID 431815.1]
Oracle 11i HRMS Approvals Management (AME) Implementation Guide [ID 282529.1]
What is the use of 'Self Service Preference for Person' EIT in Person form [ID 254639.1]
How Does One Create Organization EIT (Extra Information Type)? [ID 344472.1]
Regard
Helios

Where can i download the weblogic modules for apache (source/precompiled)

I have wandered the wonderfull world of the BEA website for 2 full days now and still am not an inch closer to de download site for the weblogic module for apache. That is, i have apache and need to add the weblogic module to it.
Complications are Solaris 10 and apache 2.0.55. So the latest versions of OS and webserver. Is there a precompiled module available or can i get the sources somewhere?
I do have a working module for apache 2.0.53 if someone can confirm that this is supported for 55 that would be fine by me.

At times when the sources were available I tried to build it on a "new" platform (Solaris x86 32bit) and I can tell you: it's NOTHING that is obvious. Building OpenOffice or Mozilla may appear like an easy task. It took me months to get there and to be able to just build the 'build tools'.
On top, many of the sources are (historically) written in a Pascal dialect and are transferred to C with an own precompiler so there are three languages used (C, C++ and Pascal) - so it's a pretty hard (next to impossible) job to learn some algorithms from those sources.
See also here:
http://cjcollier.livejournal.com/177628.html
http://home.snafu.de/~dittmar/sapdbdev/
and just to get an idea of the modules and their structure:
http://home.snafu.de/~dittmar/sapdbdev/sapdbModules.txt
Markus

Result Source Query Builder Filter for Content Sources

I have several content sources that I want to add to a result source as a property filter. It works fine if I just have one but when I add multiple content sources it does not give me all the results. Is there a way to add more than one content source
filter to one result source.

Hi SpGurlz,
How did you set the filter with content source in the query builder for the result source?
I tested with more than one content source as filter in the query builder for the result source in my environment, and all the corresponding results were displayed fine.
The query text for the result source was set like this: {searchTerms} contentsource:file1 contentsource:file2.
Remember to add a space between the “{searchTerms}”, “contentsource:file1” and “contentsource:file2”.
You can provide the query text of your result source here and I will help to check the logic.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Where can I set the log level for the "Inbox log file" ?

From the Siebel 8 Bookshelf, it says :
"To set the level of the Inbox log file for troubleshooting
*In Siebel Tools, set the Log Level for the Inbox log file (Alias = InboxLog) to 5*."
But where exactly in Siebel Tools can I find that Log Level ? Which object does the Siebel bookshelf talk about ?

Hi,
Loglevels are not configured in Siebel Tools. You have to configure them with the siebel client. You can find a parameter at "Administration - Server Configuration / Server / Events"
Search for "Inbox General Log Events". Set this parameter to 5. It think this should help you.
Cheers Andreas

WLSE 1130 Release 2.13 - View configs for all in flat file

I am trying to get all of my device configs into a searchable format. For example cut and paste or search using windows for specific details in configs. In CiscoWorks I do this by looking for text containing and search the .cfg directory. How can i do something similar in WLSE? I do not mind copying all into a flat file but seem to be only able to do this on an individual device basis. I am missing something I know any help greatly appreciated.

Hi Steve.
The only way to do this is by selecting individual archives and exporting them through the "Configuration-->Archive-->Export to File" functionality.
At one time this was being looked at as an Enhancement Request, but has not been implemented.
HTH,
-Joe

Oracle API for Extended Analytics Flat File extract issue

I have modified the Extended Analytics SDK application as such:
HFMCONSTANTSLib.EA_EXTRACT_TYPE_FLAGS.EA_EXTRACT_TYPE_FLATFILE
instead of
HFMCONSTANTSLib.EA_EXTRACT_TYPE_FLAGS.EA_EXTRACT_TYPE_STANDARD
I am trying to figure out where the Flat file extract is placed once the Extract is complete. I have verified that I am connecting to HFM and the log file indicates all the steps in the application have completed successfully.
Where does the FLATFILE get saved/output when using the API?
Ultimate goal is to create a flat file through an automated process which can be picked up by a third party application.
thanks for your help,
Chris

Never mind. I found the location on the server.

Can i able to put filter for my source flat file?

Similar Messages

Maybe you are looking for