Can I acces the Windows DIB with an Imaq function

I am trying to pass images between several applications, one of which is not a Labview program. I want to post an image as a windows DIB in this external program and then access it and display it in Labview.

irfocus,
When I looked over your question, I was unsure what a DIB file was. After searching on Google, it appears that a DIB is a type of bitmap (BMP).
I have checked on this file type, and it appears that the LabVIEW functions designed to handle bitmaps are also able to work with DIBs. As this is the case, it should be relatively easy to open and display a DIB file in LabVIEW. Using the VIs from the Graphics & Sound palette, you should be able to open a saved DIB file with the Read BMP File.vi and then convert this to picture format using the Draw Flattened Pixmap.vi and then display this in a picture control. Below I will attach a very basic program displaying this behavior.
Attachments:
Display_Bitmap.vi ‏14 KB

Similar Messages

  • How can i get the executing time of a IMAQ function.function could be IMAQ acquire IMAQ acquire.

    how can i get the executing time of a IMAQ function.function could be IMAQ acquire IMAQ acquire.

    Hello,
    This question was answered under a different category, here is the link:
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=5065000000050000004EBA0000&HTHREAD=000047694&UCATEGORY_0=_15_&UCATEGORY_S=0
    Regards
    Russell B.
    National Instruments
    Applications Engineering
    Engineering Team Leader
    G Systems, www.gsystems.com
    Certified LabVIEW Architect
    Certified Professional Instructor

  • How can I replace the window shadows with a simple border?

    Is there any way to change the shadow that's between windows with a simple 1px border?
    When using multiple windows the shadow makes it hard to read the text in the "lower" window and removing the shadow using ShadowKiller removes the shadow entirely making it impossible to see the difference between 2 windows.

    yes  i can found the words's unicode form Cmaps where may be at the type of tounicde and another Cmaps table just like "Adobe-GB1-GBK-EUC" ,but when the word dont have either of them how can i do? when i write a chinese word "一",it just the winansi encoding ,  there is not Cmap for me to use to change the "G208f" to the word "一"'s unicode value.
                   best wishes      thank you very much

  • How can I sync the ipod touch with windows 7 64 bit

    How can I sync the ipod touch with Outlook on windows 7 64 bit?

    I'm having the same problem with Windows 7, iTunes has been spotty about recognizing my iPod Touch. Now that I've updates Windows 7 with Service Pack 1 (June 2011), It won't complete a sync or a restore at all on either of my Windows 7 computers.
    I have gone through every troubleshooter action recommended by Apple Support, and have not been able to improve the situation at all.
    I took my Touch to the Genius Bar at my local Apple Store after trying and failing to complete a restore while troubleshooting, and it restored just fine from a Mac.  Unfortunately, it now gives me an error meesage (Incompatible device) half way through an attempted sync, or iTunes simply freezes.
    I even tried removing the Windows SP1, but that was a mess, as my display went all whacky and iTunes crashed immediately upon startup.
    The Windows 7 OS ***** in general, particularly with compatibility issues, and not just for Apple products.
    Does anyone know how to remedy this situation?
    I'm so frustrated and have wasted so much time on this issue that I'm going to throw it all out the window!
    HELP!!!!!!

  • On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

    On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

    Hi pedro109,
    If your iPhone is recognized by the computer, but not seen by iTunes, you may need to restart the Apple Mobile Device Service, as described in this article -
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Once iTunes recognizes the iPhone you should be able to sync it with iTunes. See this article
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12317
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I can no longer edit song and album information in iTunes. I right click on the album, the window opens with "get info", "rating", etc., but none of it operates. What did I change to make it stop working?

    I can no longer edit album or song information in iTunes. I right-click on the album (or song), and the window opens with "get info", "rating", etc., but none of it operates. It won't get or save album art, anything. What have I changed to make it all stop working?

    You are describing an iTunes problem, not an iPod touch problem. Try posing in the iTunes forum.

  • I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

    I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

    Your phrasing is not clear. How do you reboot into Mac OS? /can you describe the process step by step?
    Usually, you should do like this:
    - while in win, restart
    - immediately after chime, press option or alt key
    - wait for 2-3 seconds, you should see the boot options
    - select Mac OS partition
    If you have performed all these steps, and, after choosing Mac OS partition, you cannot boot into Mac OS, then your system is corrupt and should be reinstalled.

  • I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number?

    I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number? I'm about to migrate back to PC soon and I'd love to not have to buy the program again since I just bought it. Under my order history though it only shows it for Mac so I wanted to make sure.

    ihavea4
    The boxed packaging is not sold by Adobe direct. If you want to explore that type of purchase which offers the perk of a Windows and a Mac installation disc, you need to purchase from an authorized reseller who is not going to offer you "upgraded pricing". The seller would be its own entity with its own pricing and own return/refund policy. Sometimes the authorized reseller price may be less than the Adobe"upgraded pricing".
    Did you purchase your Premiere Elements 13 Mac from Adobe direct and are within 30 days of purchase? If so, you can contact Adobe Chat Orders to ask for return/refund. And, then you can explore the authorized resellers for pricing and availability of the box packaging. Maybe check out the pricing all around before making any final decisions.
    Please review and consider.
    Thank you.
    ATR

  • Help with Adobe.premiere.elements12. Please It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer.  How can I use the Windows Explorer structure to organise the photos wi

    Help with Adobe.premiere.elements12. Please
    It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer.  How can I use the Windows Explorer structure to organise the photos within Elements.

    In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
    Once you've reached just new Imports of camera output, you'll be flying along.

  • Can I use the Window XP bundled with MS virtual PC in setting up boot camp?

    Hi hi,
    before having the new 24" iMac, I have MS office professional for Mac running on my 17" G5 iMac it. The bundle pack contains Window xp professional software running on Virtual pc program.
    I want to install boot camp on my new intel mac but can i use the window xp program which is bundled with MS virtual pc software for setting up boot camp?
    please advise.
    iMac 24"   Mac OS X (10.4.8)  

    Technically, so long as your bundled version is XP with service pack 2 then you should be able to use it.
    Legally, no. When Windows comes with a PC, even a virtual PC, it's license is for an OEM installation. While it's still functionally the same as a copy you'd buy in the store its license is for use only with that PC it came with and no others.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.7)  

  • I can't acces the internet with (new!) iPhone 4s :(

    I bought my iPhone 4s yesterday. I have Wi-Fi conection, but can't acces the internet at my house. My boyfriend can do it with his phone, works fine. I can also acces internet with my macbook. I already changed the wifi settings on my iphone, and reboot, but didn't work who can help me? Maybe it's the router?

    That's a possibiliy.
    If the router is set to just accept certain MAC-addresses, it might block your iPhone. But in that case, it should not prompt you for the password, it should just refuse connection. Might depend on the type of router, though...
    If you log in to the routers admin settings, you can usually enable logging. That can help you to see if the router itself logs that the iPhone is connected or if any error messages pops up on the router side.

  • HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point.

    Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

    Moving a library: Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive.  Hold down the option (alt) key (shift on Windows) and open iTunes.  At the prompt to create or choose a library choose the copied iTunes folder.

  • HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

    Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

    nope all my songs are copied and organized into the iTunes library.

  • My Webpage screen is always minimized. How can I enlarge the window?

    My Webpage window is smaller then my screen the window is at about 10 inches instead of the whole scren . How can I enlarge the window (webpage) ? it is so annoying to work with this screen.
    Any help would be greatly apperciated.
    Thank you

    The first place to start may be to check Activity Monitor. Look at the Disk Usage tab and the CPU tab and see if any one or two things seem to be dominating that activity. Especially see if it's some 3rd party app or background process.

  • How can I reget the Windows 10 10061 auto upgrade?

    hi pros...
    I install Windows 10 10061 yesterday,
    and then restore to windows 10 10041,
    after that
    I can't cat the Windows 10 10061 autoupdate again,
    I want to reinstall 10061,
    How can I reget the autoupgrade again?
    Thanks

    On Sat, 25 Apr 2015 13:09:27 +0000, david hk129 wrote:
    excerpt:
    For those that did not know, you can switch between slow and fast ring updates in PC Settings > Update and Recovery > Preview Builds. Everyone is on the slow ring, by default. If you want to see the build right as it becomes available, you will want
    to be on the fast ring.
    http://www.winbeta.org/news/windows-10-technical-preview-do-you-prefer-slow-ring-or-fast-ring-poll
     <http://www.winbeta.org/news/windows-10-technical-preview-do-you-prefer-slow-ring-or-fast-ring-poll>excerpt:
    It turns out, there's actually two different upgrade paths for preview builds. The default setting is what Microsoft calls "Slow Ring," with another setting called "Fast Ring."
    http://www.cnet.com/how-to/change-to-the-fast-ring-for-more-frequent-windows-10-preview-updates/
    If you counter by saying those 2 sites are incorrect, I would rather believe them than you.
    If you counter by saying those 2 postings are old and outdated, you will have to produce something that says the contrary.
    Once again, you've totally missed the point, and I'm not going to continue
    this discussion as I'm tired of the childish name calling and personal
    attacks from you.
    Facts:
    1. The OP must have been on the Fast ring or he wouldn't have been
    offered 10061 in the first place.
    2. Your suggestion was to switch from the Slow ring to the Fast ring as a
    solution to his problem.
    3. I pointed out that he had to be on the Fast ring in the first place.
    4. You took exception to that and called me names.
    5. You made the bald, untested statement that rolling back to 10041 put him
    back to the Slow ring.
    6. I actually tested this and proved that this is not the case. A roll back
    from 10061 to 10041 resulted in me still being in the Fast ring.
    7. You post links to two web sites that have stories that have absolutely
    nothing at all to do with whether or not a roll back changes one from the
    Fast ring to the Slow ring. A roll back should put you back in the ring you
    were in prior to the upgrade. Since the OP went from 10041 to 10061
    through Windows Update, he must have been on the Fast ring when still
    running 10041. It stands to reason that a roll back would result in him
    still being in the Fast ring after the roll back is complete.
    It is great that you post here but posting baldly incorrect, untested
    advice based on nothing more than supposition doesn't help anyone when it
    is clearly wrong.
    Paul Adare - FIM CM MVP
    "I am truly free only when all human beings, men and women,
    are equally free." -- Mikhail Bakunin

Maybe you are looking for

  • MRP type VB

    Dear All, Please someone suggest me why should we use VB and to maintain safety stock for materials which is having longer lead time? Thanks, Rinky

  • My ipod touch keeps removing my songs and videos. What do i do.

    Im getting sick and tired of this. Yesterday morning my ipod deleted all my songs NOT bought by itunes. It also deleted my video, 8mile, which i did buy off of itunes. So last night i plugged it into my computer, and it was fine that night. All the s

  • I just have the logic board replaced

    but everytime when I turn on the machine, I need to reset the NVRAM (command->option->p->r) to have it boot up successfully. Otherwise, all I can heard is the "bong" sound and the screen is kind of dark grey, no apple logo and spinning wheel. Anybody

  • Contacts synchronize with iPhone 3g OR!!! iCloud. Need help.

    Hi, Since about a week my contacts only synchronize with my iPhone 3g OR icloud. Depending on wich selection i make in the adressbook preferences for "standard account". When i put it on "local" it syncs with the iPhone, on "iCloud" with the cloud. I

  • I am getting a weird green line at the bottom of my screen...

    I am trying to burn a DVD in iDVD. I keep getting a green line at the bottom of the screen. I tried "squaring" the pixels before outputting the project, but I didn't render the project this way in FCP before trying that. Could that be the problem? I