Can I access an external hard drive that is attached to my wireless network/router?

Ok, so after a couple deployments and time in the military, my collection of movies and tv shows has grown to crazy amounts. Being married, I want to access all these files on the home tv. I have all my movies onto one hard drive. That hard drive is attached to a Belkin N600 router. The router is then attached to the ATT U-Verse. My question, is how do I access the movies on the hard drive? I plan on playing them through the HDMI adapter on my iPad. I have tried File Browser and File Manager. So what are my options now? I feel like its close, but just barely out of my reach to get it all set up.

First off you will only be able to acess the content on the drive when you are at home where the drive is.  To access them you need to add them to iTunes on your computer then access them on the iPad though the Home Sharing service.
I would skip trying to play them though the iPad though.  You will make your life a lot eaiser if you spend the $100 and just buy AppleTV.  It will make this MUCH eaiser.  As well as give you access to your music, photos, etc.
Also as I am writing this I just realized if you have upgraded to iOS7 your iPad will probably not be able to play those movies.  iOS apprenlty will only play video purchased from iTunes.  It will not even play videos recorded by iOS6.

Similar Messages

  • I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    In the Mac side of things, backups usually come in two flavors: clones or incrementals.
    A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
    Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
    As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
    Holler if you need specifics on how to do each. This was just an executive summary.

  • Can Time Machine back up a second external hard drive that is attached via usb to a Time Capsule?

    Can Time Machine back up a second external hard drive that is attached via usb to a Time Capsule?
    I have a iMac with 10.7.4

    I want to back up the data on the external Hard Drive that is attached to the Time Capsule to the Tim Capsule using Time Machine.
    Thanks for the clarification.  Unfortunately, that will not work.  You will need to connect the drive directly to your Mac if you want Time Machine to backup the drive to the Time Capsule.

  • Can I reimage an external hard drive that is in the windows NT file format?

    can I reimage an external hard drive that is in the windows NT file format?

    With WinClone 3.x $20 for Mac or with Windows imaging - built into Windows.
    Some like Acronis didn't (may now) work on Macs. Many use a linux CD recovery boot..
    You can write to NTFS with a simple NTFS driver. There, I strongly recommend Paragon for OS X
    www.paragon-software.com
    They also have all the program and Apple Boot Camp support
    Image a system or image a hard drive or.... ?

  • How can I use an external hard drive that says it's for pc?

    HI,
    I just ordered an external hard drive that said it would work with Macs. ON the box, it says for Pc's only. Is there a way to have it work with macbookpro?
    Thanks

    Does the macbook detect the HD in finder? If it does then you can go to DISK UTILITY and select it on the left panel side of DISK utility and go to ERASE. Select Exfat or Fat 32 format if you need to go in between MAC OSX and Windows 7. (Exfat is not supported on all machines running XP) Click the erase when you have the correct format and it should work.
    If you can't detect the HD on your mac then you need to format it on a Windows machine to FAT 32 then you should be able to read it.
    Your still using leopard? do you happen to have a PPC?

  • How do I access an external hard drive that shows up in Disk Utility but will not show up in finder or on my desktop?

    I have an external hard drive that just stopped showing up one day. Is there a solution to this problem that allows me to secure the data on the drive before reformatting?

    I'm having the same problem bpay14, but with a CalDigit VR2 6TB RAID0 external hard drive.
    One day it was showing on my desktop, the other it wasn't. And I still didn't update my Mavericks to 10.9.3 (still with the 10.9.2).
    It shows up in the disk utility, and I can even Verify the disk and Repair it (but I don't wanna start repairing
    something that probably doesn't need to be repaired, so I haven't clicked the Repaid button, only the Verify button) and it says its working just fine.
    But it doesn't show in the Finder or the desktop for that matter.
    And even if I force disconnect the cable, I get the usual "this disk was not ejected properly" notification
    presumingly the disk was mounted on the desktop and I forced eject by unppluging it...
    I found a way to force open the disk, through Disk Utility that's by clicking with the right mouse button
    on the disk icon, and chosing OPEN "CalDigit AFRICA 6TB"... (see picture 1)
    But... after that, it open a Finder window showing all my internal and external drives, but that drive's
    name is in washed grey, like if it was unmounted (see picture 2).
    When selected, I can see everything and work normally on the harddrive, even opening FCPROX projects or Libraries, copying from it and writing documents into it... just normal... (see picture 3)
    BUT IT DOES NOT SHOW IN THE DESKTOP...
    that's my problem...
    I even did a Command+i for Info on the hard drive. (see picture 4)
    Can anyone shed some light on this issue?
    I would be eternally grateful!
    Thanks in advance!!!
    Cheers!

  • Why does my I Tunes play only some of my library when it can't access the external hard drive from which I imported some of the music? My esternal hard drive has been corrupted, but I    thought I Tunes would have "saved" songs I dragged to it.

    Some of my ITunes library came from CDs, some from an external hard drive with songs  in it.  My external hard drive went bad, which I wouln't have thought would have affected my Itunes library or the songs I had previously imported to it from the external drive.  But now the Itunes cannot locate many of those songs. Is there some process of importing/saving that is different when you import from CD? Hope someone can help.....MN

    Hi MNinPungo,
    When adding music to iTunes from another location (for example, an external hard drive), iTunes can either make a local copy of the file in the iTunes Library or create a pointer to the original file in the original location, depending on the preferences you have set. You may find the following article helpful:
    Add to Library
    So you can access content quickly, iTunes indexes all music, audio book, and video files that you add to iTunes. This index is called the iTunes library. When you add content to the library, iTunes adds an entry for each audio or movie file to your index. The files could be in your Home folder, somewhere else on your hard drive, on an external hard disk, or on another computer that you're accessing through file sharing.
    To add files to your iTunes library, you can use these options:
    Drag files from the Finder to the appropriate icon on the left side of the iTunes window.
    Choose File > Add to Library (on Windows, choose Add File to Library or Add Folder to Library) and select the song or folder that you want to add.
    iTunes adds entries to your iTunes library for the selected files and copies the files to your iTunes Music folder (if you selected that option in the Advanced pane of iTunes preferences).
    iTunes: About the Add to Library, Import, and Convert functions
    http://support.apple.com/kb/ht1347
    Regards,
    - Brenden

  • Can't access my External Hard Drive when plugged into my HP netbook

    I just bought the HP Pavillion dm1-3214nr. I hooked up my WD external hard drive, the netbook recognized it but there was no option to open the files on it. I'm not great with tech stuff but it seemed that the drivers or whatever for the device are up-to-date. The device didn't appear under My Computer. I tested an older external hard drive and it worked fine, appeared under My Computer, accessed the files, etc. Both EHD were used previously with Macs. Any idea how to access the files on the EHD?

    Hi,
    Could you check and let me know the details for both the EHD (model & capacity).
    Normally HD that work on MAC,sometimes dont work properly with WINDOWS, coz they use a different file system.
    The HD that worked, should be compatible with both MAC and WINDOWS, some HD have a built in firmware that can support both operating systems. 
    I am a HP employee.

  • I currently have a MAC Mini, which has 1 Firewire 800 port.  I have a 1TB external hard disk that runs at Firewire 400.  Can I insert another external hard drive that runs at Firewire 800?

    Here's the deal.  Currently running SL 10.6.8 on a MAC Mini.  Planning for eventual upgrade to ML.  Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper.  Thus I always have a point-in-time bootable backup on the external hard drive.
    The MAC Mini supports Firewire 800.  However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400.  I am considering buying an Iomega MiniMax which supports Firewire 800.  Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine. 
    So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive?  My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today.  If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
    Why am I going to all this trouble?  That's question #2.  I don't trust upgrades; they always break something.  When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened.  Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX.  So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2.  Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1.  BUT ...
    ... I've read that the ML installation creates a "service and support" partition that is different than the startup disk.  I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk.  Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect.  So I'm hoping someone else has been down this road and can advise me.  Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
    A little background on me.  I work for a major disaster recovery provider.  I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second.  THEN I started using and customizing the MAC.  I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt.  So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
    Obsessive-cumpulsive?  Yep.  Anal?  You got it.  That's why I'm in the DR business.

    You may have overloaded the port, following the instructions below it should reset:
    +1. Shut down the computer.+
    +2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
    +3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
    +4. Plug the computer back in and turn it on.+
    +5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
    http://support.apple.com/kb/HT1317?viewlocale=en_US

  • Can't access my external hard drive on my new iMac

    Hello All,
    I just purchased a brand new iMac and am unable to access my Iomaga external hard drive. It's plugged in thru a usb port and the only way it pops up is if I unplug it from the outlet and plug it back in. When it shows up in the device list and I click on it to try and access my info, the computer gets hung up for a few minutes and then says the the drive was improperly ejected. The computer is running Mac OSX 10.7.2.  I have a bunch of info on this drive that I need immediate access to. Thanks in advance for any help.
    Alex-

    It sounds like the hard drive is on its last leg. I would try my best to backup the data on the disk. Then find a replacement for it.
    Allan

  • How do I access an external hard drive that is plugged into an AirPort Extreme

    I have an external hard drive connected to my AirPort Extreme and I wanted to know how to access the photos and videos on it while using an iPhone or iPad while connected to the network.  When I go to the airport utility app on my phone or iPad I can see the drive listed under file sharing and disks so I know it's connected.  Any help would be greatly appreciated.  Thanks

    You will need an App like Filebrowser to do what you want. More details here:
    Stratospherix - FileBrowser - Overview

  • Is it possible to save an iTunes media library on an external hard drive that is connected to a wi-fi router?

    The external hard drive is connected, through USB, to a wi-fi router. So, can I save my entire iTunes library on that external hard drive and access the files wirelessly and also use that library to sync my iPhone 4S? I have a limited hard disk space on my MacBook Air and don't want any itunes media on my computer, so would it be possible to have it all on the external hard drive while maintainig the ability to sync/play those files saved on the external hard drive without the original files being on the MacBook Air? Sorry for the long question I just want to make everything as clear as possible. Really thanks guys!

    Unfortunately, I don't see a solution to your problem.

  • How to edit (read/write) an external hard drive that is attached to a router

    Hi everyone.
    I have Macbook Air (2013) with OSX 10.9 Maverics, and Netgear WNDR4500 router with WD external hard drive attached to it. My problem is that I don’t have writing permissions. When I’m trying to change something in the hard drive, it says “The operation can’t be completed, because you don’t have necessary permission”. Under Get info / Sharing & Permissions, it just says “You have custom access”, and there is no option to change privileges to “Read & Write”.
    I would appreciate if anyone could help me with this.
    Thanks!

    I don't use TM, but as far as I know, the only way it will work wirelessly is with a Time Capsule. Check the info here:
    http://pondini.org/TM/2.html
    which is from one of the subheadings here:
    http://pondini.org/TM/FAQ.html
    I would guess that you'd be able to write to the drive once you have it attached via a cable (FW, USB, etc) to your Mac (not your router).

  • External hard drive that is not connected through a network

    Will Time Machine work with an external WD hard drive that is connected through my network at home. I plan to connect the drive via by internet router or Airport Express. Can TM use any drive that my MacBook can see? (except for my local hard drive of course)

    Thanks...the cable is pretty sturdy as is--plus the drive appears in the panel in Disc Utility, just not on desktop (?). Sorry can you elaborate on SMC?
    I decided to try to recover some of the data using Data Rescue II--so far not able to get it off the drive, but I've had very good success with this app in the past. I was hoping for some similar suggestion like command-T (target disc mode as with firewire hard drives) but I don't know if this works with USB drives.

  • How can I convince my external hard drive that it is no longer too full?

    I have tried the various suggestions listed for similar problems, but i keep getting the message that the backup failed.  I deleted old backups, and now I see only 2 backups, but it still reads only 36 gb available, 'needs140 gb for backup'.  I don't understand a great deal about the process, but I have also followed the directions to use Disk Utility and have verirfied and repaired with no success.  I have disconnected and reconnected the hard drive. 
    Simple instructions will be most helpful, as I am an entry-level fixer ;-)
    Thanks... 

    Check Pondini's troubleshooting page for a solution http://pondini.org/TM/Troubleshooting.html

Maybe you are looking for

  • Develop settings are not saved

    Hello, I'm working mainly with jpeg and psd files and trying to save all settings and metadata automatically to be able to use it from other applications (e.g.Bridge). The two catalog options "Include develop settings in metadata..." and "Automatical

  • Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?

    Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?  I use HP wireless printer .

  • In Mail.app body of e-mails is blank in preview pane

    Using Mail in OS X 10.8.4 on an iMac. Everything working fine earlier but now Mail app is acting up, a little slow on response and the body of all emails is blank in the preview pane to the right. If I double click on the email itself it opens up fin

  • Objects out of alignment when published

    Hi, I;m having issues with alignment and have searched the forum bt not yet found a resolution. Despite setting alignment in the Design view, the live view places some objects out of alignment. See Kingsdown Holiday Homes - Self Catering Chalet Renta

  • Parameter changes prevent SAP from starting

    Hello all, We are running SAP ERP 4.7ext 2.00 with two nodes in a Windows/MSSQL Cluster environment. 1.     Last night, we made parameter changes to the central instance profile. In particular, we started with  adding the parameter “enque/table_size