Can i access ISA-Cards with the MH-DDK

ok the basic problemis the following (i posted that already & thx to todd..)
i want to access the 8253 timer on a (ISA) PC-DIO-96 card, which is not possible from NIDAQ.
now i want to write my own device driver (i dont actually want, but i guess theres no other way)
the MH-DDK is, afaik, based on VISA, which afaik is supposed to work with PCI/PXI cards.
now - how do i access non-PCI (ISA) cards with the DDK?
thx

Greetings,
It is not possible to use the Measurement Hardware DDK with your PC-DIO-96. You will need to use traditional register-level programming. The user manual for your board has a section that describes this process. I have included links to these manuals below (I was not sure if your PC-DIO-96 is PnP or not).
PC-DIO-96/PnP User Manual
PC-DIO-96 User Manual
Good luck with your application.
Spencer S.

Similar Messages

  • I can't access my camera with the camera button.  Only able to make videos.

    I can't access my camera with the camera button.  Only able to make videos.

    Could you have accidentally toggled the photo to video? In the lower right (usually) corner there's a little icon that has both film and video camera and a tiny slider between them. That's how you switch from one to the other.

  • I can't access Tiscali webmail with the updated Firefox

    I updated Firefox today and now I cannot access my emails in Talktalk/Tiscali. This is the message I am getting
    "Hello !
    You have undefined new mails in your inbox."
    Whose fault is it and how can I get rid of the problem?

    Could you have accidentally toggled the photo to video? In the lower right (usually) corner there's a little icon that has both film and video camera and a tiny slider between them. That's how you switch from one to the other.

  • Can i use a pendrive with the ipad mini 2 and access the files in the pendrive

    can i use a pendrive with the ipad mini 2 and access the files in the pendrive

    I've literally had a 50/50 success rate with drives. But even if you get it to work, all you'll be able to access are photos or videos that follow a very strict naming convention. You cannot access documents or music, and you cannot write anything off the iPad onto a flash drive.
    If you want to access photos or videos, you'll get more reliable results with an SD card than fighting with a USB drive.

  • HT2736 How can I gift an album with the money I have redeem from an iTunes gift card?

    How can I gift an album with the money I have redeem from an iTunes gift card?

    Sorry, but you cannot. To give a gift to someone else, you will need to provide a credit card.
    Regards.

  • Every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?

    every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?

    Hello SeamusFitz,
    Thank you for using Apple Support Communities!
    In order to get your messages to show up on your other phone, you would need to have a backup of the phone with the messages, and then restore the new phone from that backup.
    According to article iTunes: About iOS backups found here http://support.apple.com/kb/HT4946 iTunes will backup your Messages.
    iTunes will back up the following information
    Messages (iMessage and carrier SMS or MMS pictures and videos).
    This will help you backup and restore your device:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the very best,
    Sterling

  • Every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this?

    every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?
    [email protected]
    cheers

    Hello SeamusFitz,
    Thank you for using Apple Support Communities!
    In order to get your messages to show up on your other phone, you would need to have a backup of the phone with the messages, and then restore the new phone from that backup.
    According to article iTunes: About iOS backups found here http://support.apple.com/kb/HT4946 iTunes will backup your Messages.
    iTunes will back up the following information
    Messages (iMessage and carrier SMS or MMS pictures and videos).
    This will help you backup and restore your device:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the very best,
    Sterling

  • Can I use the iPone 3gs SIM Card with the iPad 2?

    Can I use the iPone 3gs SIM Card with the iPad 2

    The iPhone 3GS uses a full size SIM card.
    The iPad uses a micro-SIM card.

  • Is there a way I can access my iMac with the keyboard only from home screen?

    I accidentally turned off my Bluetooth and I tried to reboot my computer.  I'm now in kind of a hopeless situation. Is there a way I can access my iMac with the keyboard only from the home screen?

    Allow me to rephrase that question. Is there anyway I can I access my iMac from the login screen with the keyboard only?

  • HT201328 I'm trying to use an iphone 3 with t-mobile plan, itune say the phone is unlocked however i can't get a signal with the new sims card

    I'm trying to use an iphone 3 with t-mobile plan, itune say the phone is unlocked however i can't get a signal with the new sims card

    How is iTunes telling you it is unlocked? Did you go through an unlock procedure with your cell company and then Restore it in iTunes?

  • IC-AX412 MP3 recorder: can't "access" M2 card

    IC-AX412 MP3 recorder: can't "access" M2 card. That about says it all. The recorder works fine until I insert the Sandisk 8GB M2 card, at which point everything stops and the message "Accessing" appears on the display, won't go away, and I have to shut down the recorder and take out hte batteries. AND there is no way to UN-write-protect a Sandsk M2 card. How do I find out where th problem is?

    Thank you for the prompt reply. I finally figured it out. The problem isn't the card or the recorder; It's Sony's moronic refusaal to accommodate Apple computers. I'm on a Mac. Does the software that came with the IC recorder run on any non-Windows computer? No, it does not, although the tech I chatted with on your website was unaware of that fact. He was unaware that any app with a name ending in ".exe" won't run on a non-Windows computer.
        The card was brand new and unformatted. I inserted it, got the results I described and didn't know what to do, So I read the manual and found the note about formatting the card using the recorder. That claearly was a non-starter, so I plugged the recorder with the card still in it into the Mac. Both card and recorder appeared onscreen as individual volumes. I opened the Mac Disk Utility and formatted both of them.  Problem solved. Redorder now recognizes card.
    Thanks for all your help, guys.
    yours,
    Birck Cox

  • Can i have multiple iphones with the same phone number?

    If I upgrade to iPhone6 can I: a) keep my 4s operational with the same phone number; or b) must I get a new number for one of the two?

    I don't believe your cellular provider will provision 2 SIM cards with the same number. You can forward calls, if your carrier supports it, from one phone to the other depending on which one you have with you.

  • Can we have multiple Podcasts with the same Mac Account?

    Hi all,
    Can we have multiple Podcasts with the same Mac Account?
    For example, I have a single .MAC account and create a website with multiple Podcast pages...or within iWeb I create multiple sites, and each has a podcast.
    Is there a problem?
    Thks
    Leo

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail  The connection to the server failed.  I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying.

    I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail  The connection to the server failed.  I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying. Can someone please help me with this?  -Stu

    Hi StuNYC,
    Welcome to Apple Support Communities.
    It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that  cause an alert like that to appear in when starting the Mail app.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    I hope this helps.
    -Jason

  • Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

    Hi,
    I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.  I can access CRM with same user id and password from our office inside the network.  I can get
    the page to give login details once I have login details I got below error. Please help me to solve this issue.  It was working before.
    Access denied You do not have sufficient access rights or privileges to perform this action. 
    Regards,
    Noushad
    [email protected]

    On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
    Refer
    this on how to update host file.
    Regards, Saad

Maybe you are looking for

  • Elements Organizer (photoshop elements 11) stops working and shuts the program down.

    I have had Photoshop Elements for several years - first used version 3   then 8 (lost in the 2010 Nashville Flood)  bought 9 last year) - then 11 purchased in Dec 2012. I had trouble installing 11 (Premier and photoshop kept locking up in the install

  • Titles, Date/timings in CSV file.

    Hello Friends, Just curious to know if we could add the titles ,date,time in our excel report or not. I have a couple of reports with me and i have activated the "Report Export" functionality in that. Just want to know how i can add these things in r

  • Seeking Spry Gallery mouseovered thumbnail identifier/ID

    Hi! I would like to ask my earlier question about the Dynamic Image Preview extension in a different way. I think my point was not clear. Operating in a Spry gallery of thumbnails with my images in 'images/' directory, what is the identifier that wil

  • Gigabit x non-Gigabit Ethernet Switch

    Dear members: I've looked at a few models of Ethernet switches to connect my computers to (a Windows PC, a Powerbook G4 17" and a Powermac G5) but have been confronted with a choice. Some models are called "Gigabit" and others aren't. It apparently h

  • Web Services on Nokia N770

    Hi everyone, has anyone tried to develop and run a web service on the N770? Is the device capable to support something like this? I'm taking about a service producer, not a consumer. Also, is it possible to install J2ME on a N770? I've seen on the tu