Can i access my old macbook pro's 'Time machine' saved on time capsule with a new laptop

How can i access my old macbook pro's 'Time machine' saved on time capsule with a new laptop.
Also why can i only EITHER have the capsule attched to the internet OR have it as my backup external hard drive?? Things are not running smoothly can someone please help?
Many thanks,
Cirsflan

Answered in your other thread.. keep to one. Just confusing running two threads with the same question.
https://discussions.apple.com/thread/4863146?tstart=0

Similar Messages

  • How can I connect an old macbook pro...

    How can I connect an old macbook pro with that does NOT have a Thunderbolt connection to a new 27 inch iMac? I only need to do this for one specific purpose, to be able to see the work I'm doing on the laptop in InDesign on the iMac's larger screen (at a larger size as it were, so I can see a double page spread (or even a whole page would be an improvement) in one go)?  I gather it might be possible to get an adaptor but note that Apple don't seem to sell one. I know I could do this with the cinema screen but would rather do it with a new imac as that will have more use to me overall. It's a work laptop which I don't own so I don't own the Indesign to just be able to use that on an iMac. I have tried to connect monitors to the laptop in the past, but with no success at all.  I hope someone can help . Thank you.

    Im pretty sure you are talking about the M8536 which has an ADC Adapter.
    you will have to daisy chain a thunderbolt to DVI adapter with an DVI to ADC Adapter.
    the first adapter:
    http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter
    The second adapter is old so you may find used ones on ebay like this:
    http://www.ebay.com/itm/M8661LL-B-Used-Genuine-Apple-DVI-ADC-Display-Adapter-Mod el-A1006-WORKS-/160901961703?pt=US_Video_Cables_Adapters&hash=item25768117e7

  • Can I use my old Macbook Pro as an external disc drive while installing Windows 7 through boot camp?

    I want to install the Windows 7 CD on the newest version of the 2013 Macbook pro 10.9.2 running OSX Mavericks, through Boot Camp.  It does not have a disc port, nor do I have an external disc drive....but I do have an older macbook that does have a disc drive and I know you can supplement it for an external disc drive.
    My question is can I use my old Macbook pro's as an external disc drive for the installation of Windows 7 in Boot camp? Will this be a problem? Or do I have to buy an external disc drive separately.

    http://support.apple.com/kb/HT5287

  • After a clean install of the original OS 10.6.4 on my old MacBook Pro, I'm not able to install iLife with the application DVD. Anybody can help?

    My old MacBook Pro 13" 2011 (2.4 Ghz, Intel core duo, 10Gb RAM, 250Mb HD) was running on Lion 10.7 (upgraded last Spring from the original Snow Leopard). As I got a new laptop just a week ago, I was trying to restore the old one to the original factory settings and resell it.
    After unsuccessfully trying to restore Lion with the remote apple server and after going through several messages here in the community, I was finally able to re install the original Snow Leopard system from the Mac Os X install DVD that came with the computer. I did that booting the laptop from the DVD, going to disc Utility, making the partition GUID formatted Mac Os Journal extended, and then installing the system. The hard drive had been erased previously.
    It all seemed to work well; I had intended to shut down and leave the option to the future owner to configure the computer and perform the additional installs. But to double check that everything was ok, I decided to go ahead instead, and install the applications that were on a separate DVD (AHT Version 3A192, Disc Version 2.0), like iPhoto, iMovie, iDVD, etc.  Unfortunately, as soon as the installer would begin to work, after clicking on the agreement and all the preliminary steps, it would quit with an error. I tried several times.
    Does anybody have a clue of what happened and how I can fix it? I hope you can help me! Thank you!

    Selling old Mac
    Selling old Mac (2)
    Selling old Mac (3)
    Selling old Mac (4)          Apple support

  • Can i exchange my old Macbook Pro with a new one

    I have the 2010 Macbook Pro, but i would like to exchange it with the Macbook Pro Retina 13''. Is it possible.
    ASAP

    Ramzy01 wrote:
    I have the 2010 Macbook Pro, but i would like to exchange it with the Macbook Pro Retina 13''. Is it possible.
    If by exchange you mean Trade-In...
    Apple does not do Trade ins...
    See Apple's ‘Buy Back’ program here... But you may prefer to sell it privately... 
    http://www.apple.com/recycling/gift-card/

  • Can I trade my old MacBook Pro to MacBook Air OR iPad?

    Hello, I bought a MacBook Pro 13 inch last year around August, if I want to buy a MacBook Air 13 inch OR iPad, is there have any trade-in plan exist? Or I can sell the old one to Apple Store to trade some money? Thanks.

    Apple Store > Recycle and Reuse Program > PowerOn
    I have been hoodwinked.  PowerOn has gained a perfectly fine power adapter and accessories, but refuses to fairly trade with compensation.
    PowerOn stated the adapter was damage/defective, but oddly wanted to keep it and not mail it back.  It sounds like they found a reason to decrease the offered price for my laptop, but keep the power adapter and accessories. Very Crooked; especially when I know I have been using those items over the past 6 years with no problems.
    I understand that the reuse program is at will and subject to PowerOn's appraisal; however, I was informed that the only option I had was for PowerOn to keep a portion of my trade-in with no compensation or there would be no agreement at all.  This is a deal at gunpoint. I would NOT recommend giving  PowerOn your business. It is hard to believe Apple, who has great service, endorses a crooked company like PowerOn.
    You may be better off at your local pawn shop, where I would at least expect to be hustled. 

  • Can't access anything on macbook pro

    I am having severe issues with my macbook pro not booting up passed the logo screen.  I can't open recovery as the hd wasn't partitioned, nor can I access AH to determine why. I've tried everything step by step to no avail.  It doesn't beep so I'm not 100% certain if it's a logic board issue either.
    Help?!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • How can I put my old Macbook Pro early 2010 audio on my new Samsung HDTV?

    I bought a Macbook Pro in March 2010 that does not support HDMI audio. So, when I am plugging my Macbook Pro on my new Samsung Series 5 5500 HDTV with a HDMI cable that supports audio, I am getting the image, but no audio. When I go to System Preferences there is no choice of Samsung TV as audio output, which makes sense since my Macbook Pro is too old (only mid-2010 Macbook Pro supports HDMI audio).
    I then bought a 3.5mm to RCA cable and linked my computer via the headphone jack to the only composite audio plug I have at the back of my TV (see the picture below). I was expecting this setting to work perfectly fine but actually I am not getting any sound from my TV.
    I know that some people are using a cable with two 3.5 mm male ends to connect the Macbook Pro to the TV, but my TV does not have any input for a 3.5mm cable (which is strange since the TV is quite new).
    Is the only solution to get audio from my Macbook Pro on my HDTV would be to buy a new Macbook Pro or there is another alternative?
    Thanks a lot for any hint! 

    Hi B,
    It looks like you'd have to run component video in order to use the RCA inputs that go with the component inputs. Notice there is no separate audio input with the HDMI port.
    A work-around would be to run the RCA audio to a receiver/amp and through its speakers. Still another way would be if you had a receiver/amp which allowed you to combine RCA audio with HDMI video, then you could run the HDMI, now carrying both audio and video, to your TV's HDMI input.

  • How can I connect my old macbook pro hard drive, which has been removed, to a new computer

    I had to remove the hard drive from my 2010 Macbook Pro due to damages motherboard (son spilled apple juice). I bought a new macbook pro and need to pull some data offf the old on. I had the hard drive removed and see the pin connector. What type of cable do I need to connect this via usb, firewire or thunderbolt

    "Newer Technology Universal 5.25/3.5/2.5" Hard Drive & Optical Drive to USB2 Adapter w/Power. Everything you need to Plug and Play any SATA/ATA/IDE/ATAPI Drive via USB 2.0/1.1 port. Fast, Simple, Plug & Play. GREAT for transferring data, etc. (NWTU2NV2SPATA)" - http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/

  • Is there a version of Adobe InDesign I can download for my old Macbook Pro running 10.5.8?  Please?

    I really need this for a project; is there any version of Adobe InDesign I can download for a Macbook Pro running 10.5.8???

    http://forums.adobe.com/thread/1269732
    http://forums.adobe.com/message/3372415
    https://discussions.apple.com/thread/4550713
    http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=31
    try  Version CS4
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4878

  • Can I use my old Macbook Pro Ram in the New Macbook Pro (late 2008)

    I have 2, 2 gig DDR2 sticks of ram in my macbook pro. I wanted to know if they would work in the new macbook pro (late 2008)? I know the new one uses DDR3 - What would be the downside of using DDR2 in a DDR3 macbook? Would the graphics cards work to their potential? Thanks!

    No. The DDR2 RAM in your older computer is not the same as the DDR3 RAM used in the new ones. There are significant differences between them not the least of which is pin count.

  • Can't get newly purchased macbook pro to turn on - only a blinking folder with ? shows up on gray screen - help

    How do I get a newly purchased Macbook Pro to turn on - all I get is a blinking folder with "?" on a gray screen?

    Take it back where it was purchased. Include all packaging and take your dated receipt. You can request an exchange or your money back within the first 14 days from date of purchase. Don't delay.

  • HT1329 My old computer crashed.  How do I sync my Shuffle with my new laptop?

    My old laptop crashed -- it does not boot up and the monitor is blank.  I bought a new laptop with Windows 8, downloaded iTunes and connected my ipod nano.  How do I get them to sync?  All of the music on the nano is downloaded from cds (not purchased from itunes store) and I did not have cloud service.  The instructions online all say I have to make changes to the nano using my old computer, but that's no longer an option.  Any advice?

    It does not matter what the settings are for your iPod.  iTunes syncing generally works in one direction only, from iTunes library to iPod.  You cannot use iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store).  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do an Internet search on something like "ipod transfer," you should get some links.  (The CNET article seems to be popular.)
    Once the song files are on your computer's drive, you can add them to your new iTunes library

  • Can't access iPhoto on MacBook Pro

    I am getting a message everytime I try to open iphoto that it is being updated. But - it's not being updated. Any Help?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • If I buy a new MacBook Air will the Apple Store help me transfer everything from my old MacBook Pro?

    Will Apple help to copy over all the settings, apps, programs, files, etc. from an old MacBook Pro 15" on OS X 10.6.8 to a new MacBook Air 15"?  Will it work easily and painlessly?  Will they help me set it back to factory once everything is copied so that it can be sold or given to someone else?  Will they charge for this?
    I want to get the new MacBook Air 13".
    The current 15" 2.53 GHz MacBook Pro Mid 2009 has the following specs and OS:
    Mac OS X version 10.6.8
    Model Identifier: MacBookPro5,4
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.53 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: MBP53.00AC.B03
    SMC Version (system): 1.49f2
    Serial Number (system):
    Hardware UUID:
    Sudden Motion Sensor: Enabled
    According to Apple's serial number identifier it's this: https://support.apple.com/kb/SP544
    Thanks.

    You sure about this? https://www.apple.com/why-mac/better-support/
    "Purchase a One to One membership at the same time you get your new Mac from an Apple Retail Store, and you won’t have to spend hours transferring all your stuff. Just bring in your old PC, and we’ll do it for you. A Specialist will move all your files — email, contacts, music, photos, documents, calendar, desktop items — and make sure everything is exactly where it should be. One to One costs just $99, and it includes a year’s worth of one-hour, face-to-face training sessions. It’s like getting a head start before you start."
    This is really disappointing.  Buy a $3,000 computer from them and then buy another one for $1,000+ and all they want to do is screw you over, nickle and dime you and price gouge you on setting it up.

Maybe you are looking for