Can I access my time machine remotely via it's IP address?

I'm going away - I know that I might need some documents that I can anticipate. Can I access my time capsule via it's IP address?

On the other hand if you have a dynamic IP address from your ISP how are you going to find the IP address once you are away.
You call your wife and ask her to open up AirPort Utility on her computer and give you the IP address
I never used this connection very much when traveling because it was always incredibly S------L------O------W. I don't think users realize that they are at the mercy of of their uplink connection from a hotel or any other spot.

Similar Messages

How do I turn on SMB Sharing so I can access my Time Capsule remotely via iPad w/FileBrowser app?

I know I can share the time capsule, but I don't want to have to have my computer on, I just want to enable sharing and then access the files via File Browser on my iPad and Stream my movies and music stored at home.

Are you saying that your new Extreme no longer needs for you to enter the terminal script to enable TM backups to an AirDisk?
Yes, exactly that ... although since it is the Mac that runs Time Machine & uses its own system preferences, I don't think it is the new Extreme itself that makes the difference but instead some update to the OS (10.5.5, maybe?). As I understand it, so many users expected that in this respect an Extreme with a USB-connected drive would be the functional equivalent of a Time Capsule that Apple updated the code to support it, even without setting a hidden system preference for Time Machine to show (& use) "unsupported" drives.
IOW, I suspect the key is no longer necessary for anyone running up-to-date system software. If you want to check this, you can use the "defaults" terminal command to do so. For background info, see the Mac OS X Manual Page For defaults(1) for its purpose & options, but briefly its three major modes are "read," "write" & "delete." Using the "read" option as I did in my earlier post should tell you if the preference key/value pair exists & if so, how it is set. If you replace "read" in that command with "delete" it will delete the 'show unsupported' key:
<pre> defaults delete com.apple.systempreferences TMShowUnsupportedNetworkVolumes</pre>
You can also leave the key in place but set it to ignore the volumes:
<pre> defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 0</pre>
All I know for sure is that I never entered any 'defaults write' command for this on either of my Macs that run Leopard, & both do show the volumes attached to the Extreme in the Time Machine "Choose Disk" system preference -- but only after the volumes are mounted on those Macs in the Finder.

Can I access my Time Machine from another mac?

My current mac (an iBook G4, early 2005) has I think died irreparably. I'm waiting to see if it can be repaired but in the meantime I'd like to know if I can plug my Time Machine into another Mac (either a friend's or a family member's, both have 2006 MacBooks) and be able to access my stuff? I read elsewhere in the forum that this was possible if you were setting up a new mac, but I won't be able to buy a new computer for a while and need quite badly to be able to get at my documents.

yes, it's possible. plug it into the other computer. control-click on TM inthe dock and choose" browse other Time Machine disks".

How can i access the Time Machine backup on my QSAN NAS device?

Hi
I have a QSAN TS412 TurboNas. I have set it up to be used for Time Machine backup and it works fine.
I have anothe device with over a year worth of backups on it and i would like to transfer them to the QSAN device, however the TimeMachine location is not accessible in finder, only the TM app can access it.
I am not the farmiliar with MAC's but am sure there must be a way to get the files where i want them.
Any help is much appreciated.
Ben

Byocky wrote:
Hi
I have been trying to talk to QSAN, but it is very tedious. They are not the most helpful of companies.
I have 10.7.4, it is supported by QSAn, but they just say that it cannot be accessed by finder.
I though a "wiz kid" in the forum may know what to do.
Ben
Gotcha, well good luck...maybe someone has experience with them.

Can not access my Time machine HD after CLEAN install Mountain Lion

Hi Everyone!
Thank you in advance for your interest and help, I really appreciate it.
I recently did a clean Install of Mountain Lion and already did all the updates that appeared. However, before doing these clean install, I did a back up with Time Machine on my external Hard drive. Now I can't access to it, doesn't even appear on my sidebar when I connect it. On the other hand it does appear as connected when I open Disk Utility, but I can not access to it. There I have all my 5 years of University works and classes, photos, and music. This Hard drive is only dedicated for my Mac Backups and nothing more.
I guess that if I install again Snow Leopard, it will work, but I have to re install everything as my Mac is a Mid or Late 2007 15-inch Macbook pro and it came with the OS before the snow leopard 10.5 or something like that.
What can I or should I do to access my Hard Drive again?
Best Regards
Edd

Hi Mende,
Sorry for my late reply but I want to thank you for your help.
I followed your instructions and now I can access the drive thank you a lot for this. However, now I don't want to restore everything from my last back-up just some files, How can I do this? Also I want to restore My iLife, but the copy I have from the CD that came with my mac doesn't allow to install it, what can I do.
Take good care, and happy holidays.
Best Regards
Edd
PD. Are you from Spain?

Can't access previous Time Machine back ups to restore my personal data

I restored my very slow iMac using original discs and then rolled forward to get the software up to the lastest version of OS. I restored some personal files from Time Machine and then did a back up. Since doing the back up I can no longer access my old files. Any solution? Oh, and the performance is OK now!

Assuming by "old files" you mean TM backups made before you "rolled forward," you need to use the 'browse other disks' option described in the green box here to access them.
BTW, it isn't clear what version of OS X you are running on your iMac. It can't be any version of iOS like is shown in your product data -- that is just for 'i devices' like iPhones or iPads. If you "restored" from original disks you must have started with some version of Snow Leopard (OS X 10.8.x) & if you had previously upgraded to 10.7 or 10.8, you would have had to erase the HD to reinstall the older OS (which is probably why TM thinks the older backups are from another Mac).

I can't access to time machine hdd in windows

hi, guys...how u all. Recently i used my external 2tb hdd as a time machine backup....For backup first i format it then backup my mac. Now, when i connect it to my pc (windows), the hdd doesn't show up. Hope i will get a solution from u guys.
Cheers

Per HT1427: Setting up Time Machine backups using an external drive
Note: Every available drive that can be used to store backups is listed. If you’ve partitioned a drive, the available partitions are listed. Time Machine can’t backup to an external drive that's connected to an AirPort Extreme, Time Capsule, or a drive formatted for Microsoft Windows (NTFS or FAT format). If you select an NTFS or FAT-formatted drive, Time Machine prompts you to reformat the drive. Choose a different drive or reformat the drive in Mac OS Extended (Journaled) format. Because reformatting erases any files on the drive, only do this if you no longer need the files or if you have copies of them on a different drive.
The most common format for a Time Machine backup drive is Mac OS Extended (Journaled) format, but Time Machine also supports Mac OS Extended (Case sensitive, Journaled) and XSan formats.

How can I access old Time Machine backups after restoring from Time Machine?

Just restored my iMac and I can only see "Now" when I enter Time Machine. How can I see all the backups and dates I had before I restored?

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

After Mountain Lion update - problems synching contacts and accessing previous Time Machine backup

I have just set up a MacBoook Pro with a new SSD drive to replace the internal hard drive. I made sure I had a current Time Machine then connected the SSD drive externally and installed Mountain Lion. I installed the SSD drive into the computer. Before restoring applications from the Time Machine backup, I enabled the root user, logged on as that and deleted all other accounts as I have previously had issues with creating a new account from a backup and making that the 'home' user.
All went well except that a few seconds after I opened Contacts they all disappeared. They were replaced with two entries - one for Apple and one with the name of the home account.
I tried to retrieve Contacts from the Time Machine backup. I could see all the past dates but they were all red and inaccessible.
I looked at Contacts in my account at iCloud.com - they were the same 2 contacts as my local machine. I went through the installation process again but made sure that there was no connection to the Internet on completion. My contacts were intact. I exported them to a file and turned on the Internet. A few seconds later, my Contacts were gone..!
I imported from the backup I had made but, after a few seconds they were replaced with the two contacts from iCloud. Nothing I tried would allow me to add the contacts and have them synch to iCloud. I finally found a workaround:
1 disconnect from the Internet
2 import Contacts from the export file
3 select all contacts (ctrl-A) and drag them to the 'on my mac' account in Contacts
4 connect the Internet and watch all the contacts disappear from the iCloud account
5 select all contacts from the 'on my mac' account adn drag them to the iCloud account.
6 watch them synch to iCloud
I still don't understand the problem - perhaps someone can enlighten me - but here's the workaround if someone is having the same problem.
And I still can't access the Time Machine backup that I used to setup the MacBook Pro. Looking at the files within the Time Machine the backup. it looks as though it is probably a permissions issue but I don't see why as the account I am using is the same name as the one used to create the backup. Any guidance would be appreciated.
Jeff

I think you went about this the wrong way. ok....
Could you please try this... (1) Open Address Book - keep it as the main window. (2) Enter Time Machine from the icon in the menu bar... do you have that icon? If not, Open System Preferences, Click Time Machine, put a check mark in Show Time Machine in Menu bar. Close System Preferences. Go back to your addressbook. Make it the primary application open. Now go to the icon in the menu bar that represents TimeMachine and click Enter Timemachine. You should see your stuff...
if you dont...
I would also try...
Open system preferenes. go to the icloud tab. sign out. then sign in.
jdxxs wrote:
I have just set up a MacBoook Pro with a new SSD drive to replace the internal hard drive. I made sure I had a current Time Machine then connected the SSD drive externally and installed Mountain Lion. I installed the SSD drive into the computer. Before restoring applications from the Time Machine backup, I enabled the root user, logged on as that and deleted all other accounts as I have previously had issues with creating a new account from a backup and making that the 'home' user.
All went well except that a few seconds after I opened Contacts they all disappeared. They were replaced with two entries - one for Apple and one with the name of the home account.
I tried to retrieve Contacts from the Time Machine backup. I could see all the past dates but they were all red and inaccessible.
I looked at Contacts in my account at iCloud.com - they were the same 2 contacts as my local machine. I went through the installation process again but made sure that there was no connection to the Internet on completion. My contacts were intact. I exported them to a file and turned on the Internet. A few seconds later, my Contacts were gone..!
I imported from the backup I had made but, after a few seconds they were replaced with the two contacts from iCloud. Nothing I tried would allow me to add the contacts and have them synch to iCloud. I finally found a workaround:
1 disconnect from the Internet
2 import Contacts from the export file
3 select all contacts (ctrl-A) and drag them to the 'on my mac' account in Contacts
4 connect the Internet and watch all the contacts disappear from the iCloud account
5 select all contacts from the 'on my mac' account adn drag them to the iCloud account.
6 watch them synch to iCloud
I still don't understand the problem - perhaps someone can enlighten me - but here's the workaround if someone is having the same problem.
And I still can't access the Time Machine backup that I used to setup the MacBook Pro. Looking at the files within the Time Machine the backup. it looks as though it is probably a permissions issue but I don't see why as the account I am using is the same name as the one used to create the backup. Any guidance would be appreciated.
Jeff

Can I access the data backed up on my time capsule remotely via the Internet?

Can I access the data backed up on my time capsule remotely via the Internet? Let us say I have all my music or photos on my time capsule at home and I want to access it while I am outside over the Internet can I do this?

See remote access methods here.
https://discussions.apple.com/community/wireless/airport?view=documents
I am not sure what format these files are in.. but if they are itunes or iphoto.. have a care.. it is easy to corrupt them.

Can I access my Time Capsule via web, even if it´s not connected to a mac??

Can I access my Time Capsule via web, even if it´s not connected to a mac??

Yes, but the issue is the IP address. If you have a static IP from your ISP it is easy.. Or if you use another router with dyndns it is easy.. but Apple make it exclusive to their network so you can have loads of issues without a computer to function as a client for dns.
Look up remote Time Capsule access .. there is plenty of info out there.

Can't get access in Time Machine to certain folders for any date earlier than current date/time.

Can't get access in Time Machine to certain folders for any date earlier than current date/time, even when entering as Admin. Why do certain folders have small red "-" badge in lower right corner of folder icon? Here's a picture of the dilemma:
I've tried monkeying with priveleges using Command I, and changing users, but to no avail. Can anyone help?

Right. Here's what the permissions look like from the Finder Command I:
I'm not sure what "Custom" means, but when I then try to change it to "Read & Write", it doesn't take.... just comes back as Custom. Interesting to note that not only am I logged into Joan's account where the data folder and file lives) to do this, but when I do it from my own account as Admin (dunc...mpster) I get the same result.

Time machine backup via target disc mode?

My MBP is stuck at the grey screen on start up and the only way to access it is via target mode.
Is there a way to do a time machine back up through target mode or maybe a migration assist back up onto my external, through target mode.
So that once I have formatted my drive and reinstalled lion I can just restore from time machine or migration assit?
Any help or other solutions are greatly appreciated.

I would not attempt a Time Machine backup that way. Carbon Copy Cloner to an second external hard drive would be better. That way you can extract the exact elements that got corrupted.
If the target machine is not visible, you may need to follow these directions:
https://discussions.apple.com/docs/DOC-1689

Can I move old Time Machine backups that were USB to Network backups?

I recently bought a new Airport Extreme and attached my 1TB WD HD to it for network file sharing and Time Machine backups. I had originally backed up my MacBook Pro with that external HD via USB directly connected to the laptop. I know (thanks to these foruns), that, since I'm now using Time Machine backups via wifi, the location of the backups is different and my wifi Time Machine can't access the backups on the HD that were made when it was directly connected.
My question is: is there a way to move the old TM backups so that they can be recognized via wifi? If not no big deal, but then I would need to delete those backups, since they are taking up a big chunk of the external HD space. I saw a few forum posts about deleting TM backups and it seems that I would have to do it via TM itself...does that mean I have to reconnect the HD via USB to run TM so I can access those backups to delete them?
Finally, once I do get to delete the old backups (or move them, if possible), is it safe to repartition the external HD so there is one partition for TM and one for storing files via my network? I've read about using Disk Utility to do this, but I haven't tried it yet.
Thanks for any input.

No, what you're doing is splitting the TM partition in half, so this will only work if you have more that 50% free space.
See: Disk Utility - Add, Delete, and Resize Existing Volumes With Disk Utility
My only concern about that would be that my other files would be on the same partition as the 'old' TM and thus I wouldn't want to delete it, which brings me back to my original issue of space being taken up on the drive.
You should consider putting those files on their own partition, so think about spliiting the disk into 3 or more partitons, and 1st move all of your other files to the 3rd (last) partition. You just need to decide how much space to allocate.
With some limitations, you can do a lot with Partitoning without losing data, see: Disk Utility - What You Need to Know About Modifying Existing Volumes

Can I use old time machine as external hard drive

I just bought the new 2 TB time machine, and I have an old 2 TB time machine. Can I use the old TM as an external hard drive? If so, do I just use a usb cable to connect it to my computer? Thanks for help.

You cannot use it by USB..
You can use it via the network.. bridge the old TC and plug it by ethernet into the new one.
You can then access it and use it via network the same as the new TC.

Can I access my time machine remotely via it's IP address?

Similar Messages

Maybe you are looking for