Can I access notifications bar when reading?

I'm a university student and I use this reader app for lectures, homework, looking at the bus schedule, & a host of other pdf's. The only problem I have is that I can't see my notification bar. This proves to be a hassle whenever I'm in the app and I need the time or i get a message. The convenience of the notif. bar is lost as I have to clunkily go to the home screen, check the time, estimate time to the day's next event or check my message; return to the reader; and repeat the process in the next couple minutes because I can't access the notif. bar. Is there a way to enable its access or can this be included in the next update. Thanks.
Device:Nexus 7 (1st generation)

yes they are great and come in handy

Similar Messages

I have a lot on books on my Kindle account. I have downloaded the app onto my IPAD but can only access my books when connected to WIFI, i would like to read them offline. Have I missed a download step. Thanks for any help you can give.

I have a lot of books on my Kindle/Amazon account. I have downloaded the Kindle app onto my IPAD mini by can only access my books when connected to WIFI, how can I read them off-line?

Yes, you've missed the download step.
Open the Kindle app and navigate to your Library. There is a tab at the bottom that says Cloud | Device. Tap the Cloud tab and tap the books you want to download to the device. You will see a progress indicator during the download. Once it's done, read away!

Please help. my address bar has vanished. i have no idea how to retrieve it, so can only access bookmarked sites when using firefox.

please help. my address bar has vanished. i have no idea how to retrieve it, so can only access bookmarked sites when using firefox.

Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
* Press F11 to toggle full screen mode (Firefox/File > Full Screen)
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization

Can not access email addresses when they are a link. F/F goes nuts and "untitleed " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down thwe computer.

Can not access email addresses when they are a link. F/F goes nuts and "untitled " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down the computer

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Thunderbird does not show a blocked remote content notification bar when content is blocked even when Allow remote content is not clicked

Thunderbird does not show a blocked remote content notification bar when content is blocked to allow remote content. The allow remote content box is not enabled in the privacy settings.

Is it always like that? or just from one source?
How are you viewing emails ?
(view / Message Body As) should be ''original html ''

HT201365 my iphone has been stolen, but my iphone have passcode and i put airplane mode. my question is can someone access my phone when they bring to shop?

my iphone has been stolen, but my iphone have passcode and i put airplane mode. my question is can someone access my phone when they bring to shop?

Not without the passcode.

I went from an I-Phone 3GS to I-Phone 5, I can make phone calls out but I can't access the internet when I am away from my WI-FI connection... any ideas?

I went from an I-Phone 3GS to I-Phone 5, I can make phone calls out but I can't access the internet when I am away from my WI-FI connection... any ideas?

but in the home with wireless internet access , it is continued when off, sometimes can not working,
What does "it is continued when off" mean?
And the same for "somtimes can not working"?

PSE 11 won't fit screen can't access slider bar at the side of application

PSE 11 won't fit screen can't access slider bar at the side of application.

What OS?
What screen display settings do you have?
Try changing the screen display settings in Windows or OSX to increase the resolution?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?

How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?
Tried connecting to itunes and hitting restore and get a error message 3194.
Any help would be greatly appreciated.

odds are entering password too many times

Can't access fonts in when composing a new email

When I start a new message in mail, if I want to change the font I can't access the font tool either by selecting the font button in the outgoing message tool bar or by the drop down format menu ( or by "command T"). I can, however, go into preferences and change fonts universally. Basically if I cut and paste a sentence from another message or word doc into an outgoing mail message that is a different size or font and I want to make all the fonts the same, mail won't let me.

The mystery, however, is I have no problem with my email and contacts when I log into Safari..... Using the same Yahoo provider !

Can't access my SPA2102 when connected to my BEFSR41 router

Hi All,
I have a Linksys EtherFast Cable/DSL router #BEFSR41 to which I have two computers, one printer, and one Linksys PAP2T-NA connected. I purchased a SPA2102-NA because I need two additional phone lines, but I had no more router ports. I was told that the SPA2102 could be connected to the router and my PAP2T could then connect to the LAN port of the SPA2102. Well I tried connecting the SPA2102 to my router and then connecting my PAP2T to it, but I am not able to access the configuration/setup menu for the SPA2102. How can I configure this SPA2102 when I can't even get to the setup menu?
Please help, I have spent the entire day searching the Linksys knowledgebase, etc. and I can't figure out what I need to do to access this unit. By the way, when I go into the router configuration menu and list the DHCP Active IP Table, the first item is SipuraSPA with an IP address of 192.168.1.100 (my PAP2T is 192.168.1.104). I have tried accessing the SPA2102 by typing 192.168.1.100 but I just get a browser error "Page not found". So the SPA2102 is showing up as connected to my router, but I have no way to connect to it because it has been given a dynamic IP address by the router. How can I solve this problem?
TIA

Thanks HW for your reply. After further consideration, I've decided that my best solution is to add an 8-port switch to increase my network capacity and therefore I can replace the SPA2102 with a simpler PAP2T, giving me two PAP2T's. I'm afraid I was looking at the SPA2102 as a stop-gap measure in providing an additional LAN port, but that would leave me without any spare LAN ports for the future. In the end, the small cost of an 8-port switch will give me future capacity and allow me to use the less costly PAP2T while gaining what I needed in the first place. Sorry for taking up your time.
Thanks.

Can't remove black bars when converting

I have seen numerous threads talking about Adobe Media Encoder producing black bars when converting videos. Some are saying it's a bug w/ CS4, others are saying its something to do w/ non-square pixels. I really don't know, and I really don't understand most of it, sorry.
My dilema is, I have some .mov files created in Final Cut Pro with a 4:3 aspect in NTSC. I need to convert them to .flv so I can stream them on a website. My current settings are:
FLV - Web Large, PAL Source (I'm using PAL because it seemed to create a better quality video when I was streaming)
Export Video
Export Audio
On2 Codec
Resize Video (786x576)
Frame Rate - 15
Bitrate encoding - CBR
Encoding Pass - One
Bitrate - 1,500kbps
Undershoot (%Target) - 90
Quality - Best
When I export the files and try to play them in a web flash player (480x400) I get black bars on the top and bottom. I don't really have a lot of experience doing video editing so I'm shooting in the dark here. I have adjusted a lot of the pre-mentioned settings but still no luck. Help me out please!

Ok, it will take a minute to figure out how to do that....haha. (This is my first time using the software, can you tell?)
Meanwhile, take a look at these screenshots. The output preview appears to show it will still produce the black bars. Although I'm not sure if I want to trust it because there are times it appears to show it WONT produce black bars and yet it still does...

I can't access my music when i have my ipod connected... this *****...

ok, i have a 20GB ipod with the click wheel. i heard a lot of good things about the newest version of ITunes so I decided to download it. After installing it, half of my playlists were gone... AGGHHHH!!!!
I would be able to deal with that, but now I can not access my music. What's the deal here? I can see the songs, but iTunes is not allowing me to click on any of the songs. But when I unplug the iPod, I can click on any songs in my library.
Can anyone help me out here? Thanks so much!!!

Uncheck the "automatically sync" button (or it might be checking the manually manage the ipod). If you have it set to automatically sync the music, it will automatically transfer your music and playlists from your comptuer to the iPod, which means any changes on the computer get put on the iPod. If you uncheck that button, you'll have to manually manage the music, but you'll be able to access the music on the iPod. Took me a while to figure this one out.

IPAD 2 WiFi only. Can I access the Internet when I plug into my computer that is connected to a LAN?

I just purchased an IPAD2 and I love it. It's WIFI only, and I want to access the Internet when I plug in to my computer since I don't have 3G capability. But when I try and connect it won't allow. Is this standard? Am I preventing from high speed internet access on my IPAD 2 even when my computer is connected to the Internet? Any help would be much appreciated

You cannot access the internet through the connection to a computer hooked up to the internet.
It may be possible to configure your PC as a WiFi access point. Check your PC documentation for its capabilities.
Or, purchase a WiFi router and hook it up to your ISP modem. You can hardwire your PC to the modem.
Good WiFi routers can be purchased for $30-$40 dollars if you shop around.

How can i access my PowerMac when i am away from home?

Hi, I have a powermac G5 at home and have just bought a mac book pro. is there any way to set them up so i can access the powermac when i am out traveling with my mac book? I guess i would need to leave the powermac on all the time, but how do i get the two connected? i have far to many files to use iDisc and i have a lot of extra drives attached to the powermac at home.
Any chance the answers could be simple!!! I'm relatively new to macs and know almost nothing about accessing computes over the internet.
thanks for your help.
martin

Hi Martin,
I am just implementing something which may be of interest to you.
I have a home network of a G5 Quad and several PCs which I wanted to be able to access, securely while I was away from home. (Using a XP laptop).
I have just purchased a LinkSys RVL200 VPN router and ASDL modem and after a fair amount of trial and error managed to get it working to my ISP, British Telecom.
Effectively I can now connect my laptop from anywhere on the internet and it is as if I am sat on home with it connected to my local network. Most importantly it runs via an https: tunnel (may not be the correct phrase) so it is secure.
To connect all I have to do is go to my IP address via the browser using https://, logon on and it creates a connection through which I can access my Mac and PCs. Once the connection is in place then I can run any application on my laptop and it connects fine. (Last night I tested it running ftp to my G5 which is hidden behind the firewall.)
The only thing I am not sure about is how it would connect using a Mac rather than an XP machine (the secure connect icon appears in the tray) but if it fits what you are looking for I'm sure LinkSys could advise on whether it would work.
G5 Quad Mac OS X (10.4.3)

Can I access notifications bar when reading?

Similar Messages

Maybe you are looking for