Can I access the list of virtual channel names in VB

I have a PXi chassis with about 100 different sensors attached on various SCXI modules, I have created a unique virtaul channel for each.
I have no problem using these names in my code to access the data.
I would like to create a diagnostic panel in my application from where I can access any of the channels via a drop down combo.
Is there a method of getting reading the virtual names that I have created in MAX?
Graeme

It sounds like you are probably using the CWDAQ ActiveX control in VB6. In that case, unfortunately, there is not a way to get this information.
If you are using DAQmx, you could use the C API or LabVIEW or CVI to get this information, but it is not yet supported in the .NET or C++ APIs. If you need more information on calling C functions from .NET or C++, please post a reply to this message.
Tony H
Measurement Studio

Similar Messages

I discovered today that the list of add-ons disappeared, but all add-ons are working normally. How can I access the list of extensions?

I'm running MacOS 10.6.8 and Firefox 5.0.1. When I open Tools->Add Ons, the list of extensions is empty. This happened after I restarted Firefox after having it running for a couple of days. Since then FlagFox reports a "missing IPDB", but I#m not sure if this is related.

Thanks a lot for your reply! Unfortunately the problem is that clicking on the extensions icon as you propose only brings up an empty add-on list, so there is no chance to uninstall FlagFox (it says "You don't have any add-ons of this type installed", see also the attached image). As mentioned, all other add-ons are running well.
Is there any other way to access the add-on? I'm not afraid of the command line btw. ;-)

When i try to check my plugins are up to date I am linked immediately to a download java page and can't access the list of plugins

When I am in ad-ons manager and I click "check to see if my plugins are up-to-date" I am linked to the list of plugins them immediately sent to a download java page. I have uninstalled java because of the ongoing security issues

Try this page:
* https://www.mozilla.org/en-US/plugincheck/

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

I was given an older ipod as a gift and want to load the songs into my computer, but it says that I can not access the sync feature. I registered for an Apple ID and when I tried it won't let me register.

When I was given the iPod it had a GREAT load of songs already on it. (That was part of the whole "gift" thing.) I want to sync it and create playlists in my own library and copy the songs to my computer's library too. I applied for an Apple ID, and find that this is so old that eventhough it was NEVER registered it is listed under a weird username and won't let me register as the new owner to access the music and sync. What do I do? It is an older version (I'm assuming) with 80G and only 25 have been used. I can't access the music already loaded and don't want to lose the mp3 files I have in my existing library now too.
Any help is greatly appreciated.

Not sure if this helps:-
The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work. Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple Store and explain that they were gifted to you and ask how you can use them. The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

Can you limit the list of AirPlay devices seen on the iPad if multiple devices exist?

We are setting up a school to use iPads, Apple Tvs and Projectors in classrooms.
- Teachers are using iPads in classrooms and we are setting up wireless projection using AirPlay.
- Each classroom has an Airport Express with a unique WiFi name.
- Each classroom has a projector with an Apple TV mounted on it and each Apple TV has a unique AirPlay name.
- An iPad and the AppleTV are the only two devices on each classroom’s wifi.
- When a teacher wants to mirror iPad to the projector, we thought they would just see their own AppleTv (projector) but, I think because the underlying school network is the same in each classroom, the teacher sees every device in the school.
Question: If you have multiple AirPlay devices on the same network, can you limit the list that one sees on an iPad?
And/or: Is there a way to set up the wifi differently so the teacher is not presented with a huge list of devices?

I wish teachers like you would leave technology you don't understand alone. The fact you were allowed to plug-in "consumer grade" access points into a enterprise network says a lot about your lack of knowledge; next you want to turn all of these low end access points into routers!? Your going configure a unique SSID on every AP setup each device to only connect to that network? Do you have any consent of wireless networks? Management?
It's teachers like you that bring down a network. Then you insult the very IT staff that work in a very thankless position in which most of their interaction occurs when something doesn't work.

How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?

-------------------------------------------------------------------------------------------------------------------------------------------
How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?
Is there a recent known problem with the about:sessionrestore command or is there any other way understandable to Firefox 29.0.1 through which recover the information stored in the sessionstore.js files.
It seems the command about:sessionrestore is not capable anymore to read the contents of the sessionstore.js file present in the user profile folder.
The box where windows and tabs should be listed is empty.
I tried to paste a few old sessionstore.js files in the user directory while the firefox.exe process was not active, then opened Firefox again and tried to launch the about:sessionrestore command without any result.
I think the files are not corrupted because I used most of them in other occasions and I stored them in folders not connected to the common use of any process.
Also, I already successfully used the about:sessionrestore command in Firefox 29.0.1 in a few other occasions.
I did a "clean reinstall" of Firefox 29.0.1 and the box contained in the tab where about:sessionrestore is executed is still empty even if the files themselves contain such information as tabs location and html addresses.
After this I recovered the profile data I had stored in another folder and this is what you can see attached to this question.
---------------------------------------------------------------------------------------------------------

If I select the "show my windows and tabs from last time" option in the startup settings the contents of any savestore.js file i paste in the user profile folder are opened without any problem.
still, the box in the tab loaded by the about:sessionrestore command is blank and empty, so it's not possible to "de-select" any window or tab. it's necessary to find an editor to modify session backup files which may contain "bad addresses".
does such an editor already exists?

How can i get the list of all users present in the UME ?

Hi Experts,
How can i get the list of all users present in the UME ?
Is there any API or function Code to get all user list??
Please help me out!!!
Help will be rewarded
-pankaj chouhan

Hi Pankaj,
find the official NetWeaver security javadocs (including access to UME) <a href="http://help.sap.com/javadocs/NW04S/current/se/index.html">here</a>. Look for classs UMFactory and proceed from there.
Best regards,
Martin

Can I see the list of Event's Notification types of Azure Site Recovery ?

Can I see the list of Event's Notification types of Azure Site Recovery ?
I want to verify Event's Notifications rather than "Virtual machine health is OK".
Example senarios:
senario 1. Disconnect the Ethernet cable.
Can I get the notification e-mail at Disconnecting the Ethernet cable from the on-premises Hyper-V host ?
senario 2. Turn off
Can I get the notification e-mail at Turning off the protected Virtual Machine on the on-premises Hyper-V host ?
senario 3. e-mail test
Can I get the notification e-mail after turning on Event Notification ?
Is e-mail address Collect ?
Can I get e-mail without auto-Junk ?
Regards,
Yoshihiro Kawabata

Hi Yoshihiro Kawabata,
Thanks for bringing these requests to our attention. We currently do not have support for these three types of email notifications. I will add them to our backlog and we will enable support for them soon.
Currently, we support email notifications only for replication issues. One example you can easily test is to Pause the replication of a virtual machine from the Hyper-V Manager UI. This should send an email notification.
Let me know if this helps.
Thanks
Siva

How can we access the file/directory system in the server

Hi friends,
I have made a text editor attached with an audio player for my project.
Both text editor and audio player are implemented in applet and put in to a
jsp page using jsp:plugin. Text editor and player are separate applets running
in the same page and from same server.A client who is using this editor may
want to save the edited text files to the server as well as hear audio files from
directories in the server.
My question is how can we access the file/directory system in the server
like we do in the local machine.When the user cliks save or openfromserver button
in the editor, folder/files in the server must be displayed as we do with FileChooser.
I am using Apache Tomcat 5,wiindows 2000 server, jdk1.5.
manu

You can't access it directly. But your applet can make net connections to the server, and the server can provide that kind of functionality. Generally this is easiest by making HTTP connections and having the server provide the functionality via the web server. (So in your case, JSPs or servlets on the server would list/deliver/create/modify/delete files, and the applets would invoke those JSPs and servlets.

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset. It was working fine until I went to activate it and update the PRL. It turns on, but Freezes on the LG Logo. it currently goes into the LG Download Mode, and When I restore with LG's Mobile Support Tool, It finishes, reboots, and stays at the boot Logo. I was wondering if I can possibly get a replacement phone? This is a little upsetting, as i was hoping to have it transfered from prepaid to postpaid service next month

Who is your Internet Service Provider...?
Do you have any computer which is able to go online wirelessly...?
Have you forwarded any ports on the router...?
Try to adjust the wireless settings on the router and check...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Also,for the gaming system,check this link.

Can't find the adapters in communication channel

Hi
I can't find the adapters in communication channel , on hunting the sdn i could find the below soln :
To rectify this you must import the BASIS SWCV 7.0 into the Integration repository.
can any body give me step by step for importing in the integration repository.
rgds
shazia

Hi,
First do SLDCHECK in XI ABAP Stack, then if it has errors means follow this help file
http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
If SLDCHECK is working fine means,
Try to re-import the BASIS SWC into IR againg, then only you will be able to see the list of adapters in the list..
Regards
Seshagiri

Can't access the filter gallery in CS3

I'm in the process of editing an image and I can't access the filter gallery...it's not active under the filter >filter gallery...I started out with a CR2 raw file...what am I doing wrong?

Is it 16 bit per channel? Change to 8.

Can we access the e-business apps schema with database adapter

Hi..
can we access the tables/views/api's in apps schema using database adapter. Generally we access it using oracle apps adapter.
Thank you,
Dan.

Hi Dan,
As mentioned by the other user, you can very well use the db adapter as APPS Schema user to connect to any APPS instance.
This is the reason why you have the connection navigator in JDev not differentiating much for APPS adapter connection and db connection listed.
However, having said that I would still prefer using APPS JCA Adapter for APPS instance and DB adapter for databases.
Regards
A

HELP !!! I can not access the Internet Recovery In Mac Pro!

HELP !!! I can not access the Internet Recovery on my Mac Pro (mid 2012)! Mac Pro has Internet Recovery ?

"Regular" Recovery (from the Recovery partition on your Hard drive or your Time Machine Backup) remains available, but Internet Recovery (from firmware only) is not a feature on the silver tower Mac Pro. It is not on this list:
Computers that can be upgraded to use OS X Internet Recovery - Apple Support
But the basic recovery features are available if a recovery partition is available:
OS X: About OS X Recovery - Apple Support

Can I access the list of virtual channel names in VB

Similar Messages

Maybe you are looking for