Can i access the numpad again even though my iphone is disabled?

Hi everyone!
I have an iphone 3gs that i haven't used in a while and it says "iphone is disabled. Connect to iTunes". My mom had tried to unlock it multiple times and got it to this point. I know the password, is there any way i can access the numpad again because i do not want to restore it.
& when i connect it to itunes, it doenst do anyhting but say that my computer cant access it due to it being locked.
& since its been a while, i do not have my original computer i set it up with as it had a motherboard failure about 4 months ago.
& No, this is not a stolen iphone as i know the password, and i do have all the original packaging (just throwing this out there)
In short:
can i access the numpad again even though its disabled?
Thanks!
Jordan
Message was edited by: j0rdann - for title change

If it doens't say try again in x minutes, no. And since you don't have the computer is was last synced to, you're going to have to restore it.

Similar Messages

I can't access to wi fi even though i have a good signal and the router is working properly (my laptop works perfectly)

i can't access to wi fi even though i have a good signal and the router is working properly (my laptop works perfectly)

Try rebooting the router and see if that helps. unplug it from power for about 30 seconds and then plug it in again.
You can also try restarting your iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. Pls help..

Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. This has been going on for the past 3 days already. Pls help..

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

Can't access my gift card even though the remaining dollars are located in ITunes shop window. Continues to ask me to sign in with password to access billing information. I have done this countless times.

I can't access my gift card though the account balance is shown in window when I sign in to I store. When I try to purchase a song, site requests me to sign in for billing information. When I do this, it just keeps replacing the same window with same request. I even changed my password, thinking that would help.
Help!!!!!!

Select None for yoru CC and verify your address.

I ahve taken over my daughter's computer but can't install the office software even though I ahve one licence left because it comes up with the old product number from her licence

I have taken over my daughter's computer but can't re-install the office for mac 2008 software even though I have one licence left because it comes up with the old product number from her licence. I ahve renamed the computer but wehn I tried to install again there was no option to enter the new licence number

Follow these steps to remove Office completely, then reinstall.

HT2534 I can't see the "none" option even though I followed the procedure step by step. What is the problem?

I can't see the "none" option when trying to open an iTunes account even though I followed the procedure detailed in the apple website step by step. What is the problem?

jimka_2001 wrote:
What should I try next?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Can't stop the email notifications even though I turned them off

I can't seem to stop the email notifications -- after receiving 240 emails this morning -- even though I have clicked on the notifications to STOP. How do I get them to stop? Apparently I'm getting all email notifications for ANYTHING iMac (Intel).

I can't seem to stop the email notifications -- after receiving 240 emails this morning -- even though I have clicked on the notifications to STOP. How do I get them to stop? Apparently I'm getting all email notifications for ANYTHING iMac (Intel).

HT2518 I've migrated from PC to IMAC, but it has created new users. I can't access these user accounts even though I've set up passwords for them as administrator. Can you assist?

I have transferred files from PC to IMac using Migration assistant. This has automatically set-up new users on the IMac and I can't access these. As administrator, I have set-up passwords for these new users, but when i try to acces these new users usung those passwords, the screen shakes as if the passwords are incorrect. Any suggestions?

fungec wrote:
I can see these in my user groups, and I can change the passwords on both as often as I like. But when I then try to logon, the screen just shakes and nothing happens.
I don't do Windoze, so haven't been able to test migrating from a PC.
There have been a few similar posts here. Are you trying to log on to the new user account(s) via Fast User Switching? If so, apparently that doesn't work. You need to turn that off (via System Preferences > Users & Groups > Login Options. Remove the check from the Show fast user switching .... box.
Then log out of all accounts, restart, select the new account from the login screen and you should be prompted to set the password.
I'm not sure a screenshot will help (and to be honest I'm not sure how to do screenshots on the IMac - I've been a PC man for over a decade!).
In most places, Shift+Cmd+3 will print the entire screen; Shift+Cmd+4 will produce a "target" you can drag over a portion of the screen.
EDIT: by "most places" I mean after you're logged-on, and OSX knows your preferences about how & where to put the screenshot. So it won't work on the login screen itself.
Message was edited by: Pondini

My password can't access the computer again

Hello,
I've been using my notebook for over 3 year and I've only change my password like four times because I'm not good with passwords.
Something strange happen just now when I put on my notebook, normally when it comes up I will enter my normal password. Now the password I've been using for over a month is not working for it anymore its only telling me "incorrect password" or reset.
I don't have a reset disk too and I've tried all my recent passwords it not still working.

Hi there @teefantastick01,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having trouble logging into your computer, due to a problem with the password. I am happy to help you with this.
Please look through the following page, that offers several methods you can try.
HP PCs - How to Recover Your Lost or Forgotten Password (Windows 7)
The last options on the page will give you access to your computer again, but you will lose any data as well, so review the page carefully, to understand what could happen.
I hope this helps.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

After a few downloads, using "Save image as..." causes Firefox to download the image again even though its already on the screen.

You would think that having downloaded an image and displayed it on the screen, Firefox would be able to save the image to disk (using right-click, "Save image as...") without need of downloading it all over again. But that's exactly what it does after just a few image saves.
This can be both expensive and time consuming when I happen to be working via a mobile or dial-up connection, which is often.
Any ideas?

As an addendum, the 10.6.8 OS has also been sluggish when I log in or out of my computer (my old PowerBook G4 boots faster after being off). Otherwise, everything else seems normal.

New, to me, Leica D-LUX 6. I just upgraded my Mac to Yosemite. I can't open the RWL files even though I upgraded the DNG file. I am using Photoshop 6. It does taks wonderful jpg. pics but, I would love to have the RAW files open.

Files on my computer. I upgraded the DNG file. I am using Photoshop 6. This camera takes pretty good pictures in JPG. but I would love to have the RWL files open.
Does anyone have any idea of what works?

Realised pretty soon some thing was not right with images but continued work flow with out problems with any other import
Exactly what was not right?
Most likely a hardware problem causing corruption in the transfer of files from SD card to your computer. It could be the SD card itself, card reader, hard disk or memory.
Side issue:
Open Lightroom 4 on macbook air import to HD
Drag and drop in Lightroom on to external HD
why don't you save yourself a step and import directly to the external HD (and thus also produce one less place where file corruption can happen)?

After I use Siri the volume on my keyboard is all the way up and I can't hear the keyboard clicks even though keyboard clicks is on why does this happen after I use siri

I need answers people please!!!!!!!!!!!!!!!!!!

It sounds to me like your keyboard has been damaged and needs to be repaired or replaced. Can you try an external keyboard?

How do I restore an iPhone when is has Find my iPhone on? I can not access the phone to turn Find my iPhone off

I really need help please!

I need to restore to iOS6 from 7.
Please don't post here about beta software. There are confidential forums set aside for developers to use. Developer Forums. If you are a paid developer or seed tester then it's a violation of your NDA to post in these forums. If you aren't a developer or seed tester then you have an illegal copy.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?

-------------------------------------------------------------------------------------------------------------------------------------------
How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?
Is there a recent known problem with the about:sessionrestore command or is there any other way understandable to Firefox 29.0.1 through which recover the information stored in the sessionstore.js files.
It seems the command about:sessionrestore is not capable anymore to read the contents of the sessionstore.js file present in the user profile folder.
The box where windows and tabs should be listed is empty.
I tried to paste a few old sessionstore.js files in the user directory while the firefox.exe process was not active, then opened Firefox again and tried to launch the about:sessionrestore command without any result.
I think the files are not corrupted because I used most of them in other occasions and I stored them in folders not connected to the common use of any process.
Also, I already successfully used the about:sessionrestore command in Firefox 29.0.1 in a few other occasions.
I did a "clean reinstall" of Firefox 29.0.1 and the box contained in the tab where about:sessionrestore is executed is still empty even if the files themselves contain such information as tabs location and html addresses.
After this I recovered the profile data I had stored in another folder and this is what you can see attached to this question.
---------------------------------------------------------------------------------------------------------

If I select the "show my windows and tabs from last time" option in the startup settings the contents of any savestore.js file i paste in the user profile folder are opened without any problem.
still, the box in the tab loaded by the about:sessionrestore command is blank and empty, so it's not possible to "de-select" any window or tab. it's necessary to find an editor to modify session backup files which may contain "bad addresses".
does such an editor already exists?

Can i access the numpad again even though my iphone is disabled?

Similar Messages

Maybe you are looking for