Can I add 8gb of memory to my macbook 13 inch late 2009 model?

Is it possible to add 8gb of ram my mac, if the specs only say up to 4gb?

Maximum Memory
8.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 204-pin PC3-8500 (1066MHz) DDR3 SO-DIMM

Similar Messages

I have a MacBook 13-inch, Late 2009, I'd like to get a cable to connect a monitor. However I keep order the wrong part. Can somebody tell me what part I need.

I have a MacBook 13-inch, Late 2009, I'd like to get a cable to connect a monitor. However I keep order the wrong part. Can somebody tell me what part I need.

The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort.
The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.

Can I add any more memory to my Macbook or am I maxed out?

Can I add more memory, or is 4 gigs my max?
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.53 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP51.007E.B06
SMC Version (system):          1.33f8
Hardware UUID:          C253F167-B468-5719-9F8C-0A70144AD421
Sudden Motion Sensor:
State:          Enabled
Memory Slots:
ECC:          Disabled
BANK 0/DIMM0:
Size:          2 GB
Type:          DDR3
Speed:          1067 MHz
Status:          OK
Manufacturer:          0x80CE
Part Number:          0x4D34373142353637334448312D4346382020
Serial Number:          0x4806C72C
BANK 0/DIMM1:
Size:          2 GB
Type:          DDR3
Speed:          1067 MHz
Status:          OK
Manufacturer:          0x80CE
Part Number:          0x4D34373142353637334448312D4346382020
Serial Number:          0x4806C776

You can use this Link to check which RAM is suitable for your Mac... and how much you can Install...
http://eshop.macsales.com/shop/apple/memory/
It is Important to get the Correct and Matching RAM
For best performance, fill all memory slots, installing an equal memory module in each slot.
That site also has videos on how to Install RAM should you need it...
Here are Apples Instructions... Installing RAM
MBP        http://support.apple.com/kb/ht1270

Can I add hard drive memory to my MacBook Pro (13" with retina display)?

I know I can use an external hard drive, but is there some way to add hard drive memory (either myself or taking it to an Apple store)?

OWC does offer internal storage upgrades which, depending upon the vintage of your MBP, may or may not be applicable:
http://eshop.macsales.com/shop/SSD/OWC/Air-Retina/Apple-MacBook-Pro-Retina-2012- Drive-Internal-Flash
Ciao.

I have a Macbook 13-inch, Late 2009 I'm running 10.8 Mountain Lion. iWork '09 will not work, how can I fix that without purchasing new programs from the App Store?

Help! 911! S.O.S.

Update iWork to Mountain Lion compatible versions.
Software Update is now operated therough the Mac App Store. I'm guessing that you have a version not purchased through the Mac App Store, but on DVD?
If so, take a look at this thread. It's important to have the apps in the original folder. More details in the thread.

How can i add one phone number to my macbook pro application imessage

how can i add one phone number to my macbook pro application imessage

Make sure that the iPad is using the same Apple ID as your iPhone. If the phone number still doesn't appear, log out of iMessage on both devices, log back in on the iPhone, wait until it activates, then log into iMessage on the iPad with the same Apple ID.

How do I add extra flash memory to My Macbook Air Model MD223

Hi,
I would please like to know if there is any possible way to add extra flash storage to My MacBook Air 11.6" (2012) Model MD223 with 64GB. I am using Mac OS X Mountain Lion 10.8.3
Could I please get some help?
Thanks a lot in advance,
Neelu Saraswatibhatla

Welcome to Apple Support Communities
You can upgrade that, but you will void the warranty. That MacBook Air requires flash storage that it's not sold everywhere, so you can purchase more flash storage at OWC > http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Air_2012
You can't install a SSD with the enclosure because it doesn't fit

Can I add a second monitor to my MacBook Air notebook and use both monitors simultaneously?

Can I add a second monitor to my MacBook Air notebook and use both monitors simultaneously? For example, have a spreadsheet open on the notebook monitor while the second monitor is displaying an architectural drawing?

MiniDisplay-to-? adapters ... ? replaced by VGA or DVI or HDMI
Best to use only 1 adapter to match the intended cable since mutliple-adapter setup (buy a VGA, then add VGA-DVI adapter) tendsto lose signal strength.
Also graphics chips run hotter driving external display, and since the graphics chip in Air is part of the CPU the CPU may throttle itself as the integrated graphics chip heats up.
Two modes of operation:
Mirror ... same image both displays
Extended ... the other screen is "extra screen space"

Can we add additional hard disk for 64gb macbook air, since only 3gb is available as space.

can we add additional hard disk for 64gb macbook air ? since only 3gb is available as space. Is their any other way. Kindly suggest.

Try http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Air_2012
Allan

I have mac air late 2009 model identifier 2,1 running os 10.6. i want to know can i upgrede it 10.8?

i have mac air late 2009 model identifier 2,1 running os 10.6. i want to know can i upgrede it 10.8?

Upgrading is rather simple.
First you need to enure you have enough free hard disk space. The quickest way to do this is to click on Spotlight (the magnifying glass at the top right corner of your screen) then search for and open an app called Disk Utility. Once Disk utility opens you need to highlight the second item on the left which is called MacintoshHD by default. Then look on the lower right for available disc space is gigabytes. You need a minimum of 8gb available.
Got enough space? Great. Next click on the Apple menu on the top right corner and select "About this Mac" and make sure you are running 10.6.8. If not click software update and install it.
Once you verify you are on 10.6.8 then click on the Apple menu at the top right and select the third item on the list called the App Store. Mountain Lion is on the lower right of the first page that loads. After that you click on the $19.99 then enter you account to continue. I assume you already have an itunes store account so use that for payment. As soon as the charge goes through it starts to download. Its about 4gb so it can take anywhere from 20 minutes to several hours depending on your internet connection speed.
If its going to take a long time you may want to go to the Apple Menu at the top right and select system preferances then Energy Saver on the second line. Then move the slider on the first line all the way to the right so the Mac will not go to sleep during the download. Also be sure to plug in the power cord. Once you upgrade this setting will be retained so when you are done you will need to go back and change this setting, its the same in the newer version.
When its done downloading it will ask you to install. Its pretty simple, you need to enter your Administrator password and agree to the liscense and click next a few times. Be sure to select Macintosh HD and not Recovery HD to install to. I wouldn't imaging the installation taking more than 15 minutes after it is done downloading.
Also if you chose not to install when its done downloading you can do it later. All you have to do is search spotlight for "Install OSX Mountain Lion". The app is in the Applications folder. Also be sure to make a backup before upgrading. It should go through OK but there is always a chance it will not.
Good luck!

PNY PC3-12800 DDR3 memory work in iMac 27-inch late 2013?

Will PNY PC3-12800 DDR3 memory work in iMac 27-inch late 2013? I am setting up a new iMac and also wondered if the iMac will read 24 GB memory. Meaning the original 4X2 and an added 8x2 = 24GB. Any advice on these two questions is appreciated.

Welcome to Apple Support Communities
It should work without any problem, always that it meets these specifications > http://support.apple.com/kb/HT5908
Your Late 2013 iMac supports up to 32 GB of RAM, so you can use 24 GB of RAM without any issue. Also, you will take advantage of Dual Channel, that improves the RAM performance

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

Can Internet Explorer (IE) be downloaded to and used on the late 2008 model of iMac running OS X 1.9.5?

Can Internet Explorer (IE) be downloaded to and used on the late 2008 model of iMac running OS X 1.9.5? If yes, where can it be downloaded from?

Only if you run Windows. IE does not work on a Mac without Windows.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Can I upgrade the ram memory of my Macbook air from 4gb to 8gb?

Anybody knows if I can upgrade the ram memory of a Macbook Air from 4gb to 8gb?

Welcome to Apple Support Communities
The memory in the MacBook Air is soldered onto the logic board, so you can't upgrade RAM after buying your computer. It's important to buy your MacBook Air with the amount of memory you will use because you won't be able to install more RAM

Can i add 8gb ram to my macbook pro 15 inch late model 2008

apple's specs state that the max ram i can add to my 15" late 2008 model macbook pro is 4gb, (2x2gb) but i've seen "kits" of 2x4gb advertised for use in same model. anyone have any insight as to what i can do?

Yes, your late-'08 unibody MBP can use 8GB:
http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb

Can I add 8gb of memory to my macbook 13 inch late 2009 model?

Similar Messages

Maybe you are looking for