Can I add a button in Captivate 5 imported from PowerPoint?
I have imported a PowerPoint into Captivate and added a button. When the user clicks the button, it is supposed to open a URL. When I publish the movie, nothing happens when I click the button. I have tried this on a few different computers. I also tried inserting a blank slide into Captivate and adding the button to that slide, and nothing happens. I have verified that I can add a similar button to a Captivate presentation that is not comprised of PowerPoint slides.
Should I be able to do this?
Thanks.
I'm sorry I was not clear.
I imported a PowerPoint into Captivate. The hyperlink that worked in PowerPoint does not work when I publish the new Captivate file.
I then add a button from Captivate's menus. The action on the button is to go to a URL.
When I publish the Captivate file and click "yes" to view the output, I click on the button and nothing happens.
I hope this is clear. Thanks for responding.
Similar Messages
-
Can I add Action button on each page of my pdf document
I have created many power point slides with an action button on each slide that allows the user to click to display a video clip. I would like to create a pdf document of this and replace each of my action button in ppt with an action button that works in Acrobat.
I noticed that action buttons can be added to forms, but I want to be able to add an Action Button on each of my ppt slides to start playing a video clip (each slide will have a different video).
I would like to do this using any coding method (i.e. Javascript, VBA, C , etc). I think acrobat uses Javascript.
The reason, is that I want to display my power point slides on an IPad and they don't support hyperlink in power point. I believe IPad does suppport the full acrobat capabilities.
Can this be done ??
Any suggestions where to start ??
Thank You,
GNO problem creating the buttons and then playing this back in Acrobat. Works great.
However, unfortunately, none of the PDF viewers for the iPad support playing movies. So playing it there won't work :(.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Sat, 28 Jan 2012 11:00:47 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Can I add Action button on each page of my pdf document
Can I add Action button on each page of my pdf document
created by gw70115<http://forums.adobe.com/people/gw70115> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4171109#4171109 -
Can not add a picture to the JFrame from an ActionListener class
As topic says, I can not add a picture to the JFrame from an ActionListener class which is a class inside the JFrame class.
I have a Map.java class where I load an image with ImageIcon chosen with JFileChooser.
I my window class (main class), I have following:
class OpenImage_Listener implements ActionListener
public void actionPerformed(ActionEvent e)
int ans = open.showOpenDialog(MainProgram.this); // "open" is the JFileChooser reference
if(ans == open.APPROVE_OPTION)
File file = open.getSelectedFile();
MainProgram.this.add(new Map(file.getName()), BorderLayout.CENTER); // this line does not work - it does not add the choosen picture on the window,
//but if I add the picture outside this listener class and inside the MainProgram constructor, the picture apperas, but then I cannot use the JFileChooser.
showMessageDialog(MainProgram.this, fil.getName() ,"It works", INFORMATION_MESSAGE); // this popup works, and thereby the ActionListener also works.
}So why can�t I add a picture to the window from the above listener class?The SSCCE:
Ok, I think I solved it with the picture, but now I cannot add new components after adding the picture.
Look at the comment in the actionlistener class:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
public class Test extends JFrame{
JButton b = new JButton("Open");
JFileChooser jfc = new JFileChooser(System.getProperty("user.dir"));
Picture pane;
Test(){
super("Main Program");
setLayout(new BorderLayout());
JPanel north = new JPanel();
add(north, BorderLayout.NORTH);
north.add(b);
b.addActionListener(new Listener());
setVisible(true);
setSize(500,500);
pane = new Picture("");
add(pane, BorderLayout.CENTER);
class Listener implements ActionListener {
public void actionPerformed(ActionEvent e){
int ans = jfc.showOpenDialog(Test.this);
if(ans == jfc.APPROVE_OPTION)
File file = jfc.getSelectedFile();
Test.this.add(new Picture(file.getName()), BorderLayout.CENTER);
pane.add(new JButton("NEW BUTTON")); // Why does this button not appear on the window???
pane.repaint();
pane.revalidate();
public static void main(String[] args)
Test t = new Test();
class Picture extends JPanel
Image pic;
String filename;
Picture(String filename)
setLayout(null);
this.filename = filename;
pic = Toolkit.getDefaultToolkit().getImage(filename);
protected void paintComponent(Graphics g)
super.paintComponent(g);
g.drawImage(pic,0,0,getWidth(),getHeight(),this);
revalidate();
} -
I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!! -
Someone stole my iPhone I have find my iPhone app but it's not working how can I add my iPhone to d app from my iPad???
Having the app is irrelevant.
The ONLY thing that matters is whether "Find My iPhone" was enabled on the missing device before it was lost/stolen. If it was not enabled, there is nothing that can be done. -
Can I add or edit Keywords and captions from within the Map module?
I frequently find a need to edit or add to the caption while reviewing and geotagging photos in the Map module. Constantly toggling between modules is inconvenient. Is there a way to add/edit captions or keywords while working in the Map module (or view the map module while working in the Library?
Thanks!
Stevethank you
From: Modesto Vega <[email protected]>
To: Steve Murray <[email protected]>
Sent: Thursday, January 29, 2015 3:27 PM
Subject: Can I add or edit Keywords and captions from within the Map module?
Can I add or edit Keywords and captions from within the Map module?
created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
How can I add music to my itunes library from my other ipods?
How can I add music to my itunes library from my other ipods?
The sync is one way - computer to ipod. The exception is itunes purchases: File>Devices>Transfer Purchases
-
How can i add movies to my ipod touch from my itunes account?
how can i add movies to my ipod touch from my itunes account?
SYnce them to the iPod from your iTunes library.
Go to iTunes>Help>iTunes Help>Sync your iPod.... and follow the instructions. -
Slides imported from PowerPoint have resolution degradation
Any idea why slides I import from a PowerPoint file to
Captivate 3 look fuzzy? Whether I have simple text or use SmartArt
or especially graphics in my PowerPoint slides, the imported slides
are no where near as sharp as the slides I create within Captivate.
The "slide movies" I create while recording in Captivate are razor
sharp, but everything I import from Powerpoint does not look sharp
- some is barely passable, some is OK, some is pretty crappy -
depending on the font sizes.
My boss wants to create a training session based on some
PowerPoint slides which contain a few graphics but mostly bulletted
lists, and then intersperse that with some recorded screens to show
movements of cursors and which buttons are clicked in the
application, etc.
I've got a nice presentation put together, about 100 slides
total (which is a bit large, I understand) but can't figure out why
the PowerPoint slides are generally "fuzzy". I've tried importing
as a background image versus animation (no animation in the slides)
to no avail.
Thanks for your time...
CharlieWelcome to our community, Charlie
PowerPoint is intended to be played at full screen. When you
import it into Captivate, you are forcing it into a smaller size.
Hence a bit of "fuzziness" or distortion. There are different
things you might wish to try.
* Configure PowerPoint to play in a window. Then use
Captivate to record the PowerPoint as it plays. That would result
in crystal clear recording.
* Kevin Siegel talks in one of his blog posts about
configuring the PowerPoint dimensions so they better translate. You
may view this post by
Clicking
Here
Hopefully something here was helpful to you... Rick -
Importing from powerpoint...508 compliance issues
Accessibility is important to my agency but importing from powerpoint results in slides a screen reader can't read and the image tags identified in the powerpoint don't show up in published projects. Subject matter experts create the content, I put them in captivate 5.5 to add features and make them play with my LMS (SCORM). Adobe says published SCORM projects are 508 compliant but I can't seem to get them to actually BE compliant. Any ideas? I don't see anything in any of the tutorials or available documentation or from iconlogic.
Hi newcd,
I just read the VPat for SQL Server 2008 R2. I do not see where there are accessibility issues for the PDF format. Can you please explain?
http://www.microsoft.com/en-us/government/products/section-508-vpats/default.aspx#fbid=vv_eVaIKitQ
If this is a bug, to get it fixed you would need to contact customer support.
https://support.microsoft.com/en-us/gp/profsup/en-au?wa=wsignin1.0
Brad Syputa, Microsoft Power BI This posting is provided "AS IS" with no warranties. -
Text Quality when Importing from PowerPoint
We're having to do a certain amount of importing from PowerPoint for productivity reasons. Some slides show good imported text and some slides show really scraggy text. I can't find any pattern behind this behaviour and have tried lots of different settings to try to get to the bottom of the issue.
Has anybody else encountered this? More's the point, has anybody else encountered it and managed to find out how to get consistently good text?We're using Captivate 7. The powerpoint files are .pptx, either 2007 or 2010.
Standard Arial system font.
I don't know how the SMEs are creating the PowerPoint content, but I've tried it using both Powerpoint placeholders in the standard Office theme, and using inserted text boxes, and they all import and view just fine. There doesn't seem to be any pattern to when the text goes scraggy. -
CP8: import from powerpoint - retain individual objects on slide
I did an import from PowerPoint and chose high fidelity, but it's still just importing the slide as one object, so I can't manipulate any of the objects on the screen. I thought each shape would import as a smart shape that I could manipulate individually. Is there a way to make this happen?
Indeed, nothing has changed about import, you will not have individual objects. High Fidelity means that animations etc will play more accurately. Captivate is not a PPT-plug in as a lot of users seem to think. There are real plug-ins around if you think a PPT can make a good eLearning course (you feel I'm not convinced that a presentation tool is an eLearning tool, sorry for that).
-
How can I add a button to add multiple image in PDF from using adobe acrobat pro?
I have to create a pdf form using Adobe Acrobat Pro X.
In this form I want to add a button where I can add multiple images to the field.
I have tried using javascript event.target.buttonImportIcon(); and successfully add an image, but when I want to add the 2nd image it automatically overwrites the previous one.
Is there any way to solve this issue? I would like to have a form where I can add a lot of images in it. It is possible in word, but we really have to use adobe.
ThanksHi thanks for your answer.
I can add multiple button, but if there are 10 images that I wan to add, then I have to create 10 buttons.
Moreover, the pictures will be placed on top of each other and it means that you cannot see it clearly. -
Can not add intercom button to phone template in cucm 8.5
For some reason I can not add the intercom button to phone template in cucm 8.5
Hi Matthew,
You may be seeing this (it's older info);
Intercom Support for Cisco Unified IP Phones
Cisco Unified IP Phone Model
SCCP
7931
7941
7941G-GE
7942
7945
7961
7961G-GE
7962
7965
7970
7971
7975
You can check your version;
Intercom Support for Cisco Unified IP Phones
The list of devices that support the Intercom feature varies per version and device pack.
Use the Cisco Unified Reporting application to generate a complete list of devices that support the Intercom feature for a particular release and device pack. To do so, follow these steps:
1. Start Cisco Unified Reporting by using any of the methods that follow.
The system uses the Cisco Tomcat service to authenticate users before allowing access to the web application. You can access the application
–by choosing Cisco Unified Reporting in the Navigation menu in Cisco Unified Communications Manager Administration and clicking Go.
–by choosing File > Cisco Unified Reporting at the Cisco Unified Real Time Monitoring Tool (RTMT) menu.
–by entering https://:8443/cucreports/ and then entering your authorized username and password.
2. Click System Reports in the navigation bar.
3. In the list of reports that displays in the left column, click the Unified CM Phone Feature List option.
4. Click the Generate a new report link to generate a new report, or click the Unified CM Phone Feature List link if a report already exists.
5. To generate a report of all devices that support Intercom, choose these settings from the respective drop-down list boxes and click the Submit button:
Product: All
Feature: Intercom
The List Features pane displays a list of all devices that support the Intercom feature. You can click on the Up and Down arrows next to the column headers (Product or Protocol) to sort the list.
Cheers!
Rob -
How can we add a button on our ALV Grid
Hello,
I need to add a button on the ALV Grid and write a code on that button to download a file on the desktop of the user's machine.
How can we write a code for the same and what would be the syntax of that code.Hi,
you should copy the 'STANDARD' GUI status from program SAPLKKBL using transaction SE90 >Programming SubObjects> Gui Status.
ENTER SAPLKKBL PROGRAM
STATUS STANDARD.
exexute.
select standard check box. copy to your zprogram and your gui status.
Enter your Z program name and the name you what for this status - you can keep it as 'STANDARD' to be simple.
then go to se 38 double click on pf status .it goes to me41 screen .
there you can add your button along with predefined buttons on application toolbar.
then write code for button using user command event.
Code:
Form Set_pf_status
Notes: Called by FM REUSE_ALV_GRID_DISPLAY
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'.
ENDFORM. "Set_pf_status
In the above case the GUI status copied was named ZSTANDARD and adjusted accordingly, adding and removing the desired buttons. A button was added called '%DELETE'.
3). Create the following report:
Code:
Form User_command
Notes: Called by FM REUSE_ALV_GRID_DISPLAY
Detects whether the icon/button for
'Return Tag Deletion' has been pressed. If it has then
detect whether any rows have been highlighted and then
set the delete flag.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA: li_count TYPE I.
IF r_ucomm EQ '%DELETE'.
LOOP AT %g00 WHERE mark EQ 'X'.
ADD 1 TO li_count.
ENDLOOP.
IF li_count GT 0.
gc_delete_flag = 'X'.
r_ucomm = '&F03'. "Back arraow
ELSE.
MESSAGE W000 WITH 'Please highlight the rows to be deleted!'.
ENDIF.
ENDIF.
ENDFORM. "User_command
*reward points if usefull
Maybe you are looking for
-
Mavericks OS X Server won't install
Server 3.0.2 stalls when Preparing services. I'm running 10.9.1 on a Mac Mini. Anyone else experincing this any idea how to get the install to finish?
-
AE_OpenGL: Failed to render fragment
I am trying to pre-render a video in my after effects cs 5.5, and everytime i try to do it it comes up with this error. i turned the "Enable OpenGL" off, but now it will only render 6 seconds of my video. i have 6.5 GB of allocated RAM towards AE, an
-
Download and upload packages from NETWEAVER
*Hello! * I am going to change the computer i am using in developing my ABAP programs. They are in a package.. My problem is how am i going to transport my working package to a new netweaver system? Can you help me with this? thank you! Moderator mes
-
I cant seem to register my ipod through itunes and cant get rid of the screen for registration but have registered the product online. Does anyone know how to get rid of the registration screen?
-
Hi there, I just got my 30GB iPod Video a couple days ago, and when trying to convert certain movies onto it, it didn't convert with sound. I selected the Video for conversion the Video was converted, but now will not playback on iTunes or my iPod wi