Can I add a control bar to my intro movie using ibooks Author?
If a viewer wants to skip back a few seconds to watch part of the intro movie again they have to wait till the intro movie finsihes and watch from the start. Can i add pause, rewind FFWD optiosn somehow? Thanks
Did you disable auto-play...?
Similar Messages
-
How can we add a control on our .jsp webpage for uploading several image fi
How can we add a control on our .jsp webpage for uploading several image files as done in gmail attachment, Where a Remove button also appears if we wanna remove the particular attachment.
The SCOM Management Server is in Domain A. I've tried it already and it has failed.
So just to clarify the method I used was to go to Administration>Security>User Roles. Then New User Role>Read-Only Operator. In the Create User Role Wizard I then gave the User Role a name, Clicked "Add" under User Role Members.
Then the Select Users or Groups window pops up and I changed the Locations from Domain A to Domain B and searched for the user, which it's able to find, then clicked "OK" to add it to the User Role members which it does just fine. On
the next page which is Group Scope I checked the one group I want this account to have access to and then click next. This brings me to Dashboards and Views where I click the radio button for "Only the dashboards and views selected in each tab are
approved" and chose the folder of dashboards I want this account to access and then click next. This brings me to the Summary and I click "Create". At this point it thinks for a moment then closes out the wizard but the new Read-Only
Operator does not appear. I then look in Event Viewer and see the Event I pasted above.
Am I doing something wrong here? Any guidance on how to get around this issue would be much appreciated.
Thanks,
Jake -
Can i stop the control bar coming up when scrolling
Can I stop the control bar coming up when I am scrolling. I seem to hit it a lot and would prefer to remove it.
I keep hitting it as well. I think you can turn control Center off.
I haven't tried because it is handy. -
How can i add my outlook email to my ipad without useing the Exchange Service?
Please help me in this, How can i add my outlook email to my ipad without useing the Exchange Service?
I'm afraid you've posted in the wrong place. This is a technical forum around a particular product called 'SharePoint'. This does talk to Exchange and Outlook in places but we don't specialised in either of those. You should have a look for one of the
generic Outlook support forums or contact your IT department if it's a work related account. -
How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.
-
I don't know if I want to sell on the iBook store, and I'd rather use iBooks Author than Text Edit or Word or Pages. I understand that complicated interactive content is what makes iBooks Author special. But if I create basic text content I could create anywhere, taking advantage of the versioning and iCloud storage iBooks Author provides, do I still own my own writing?
You own your own writing but the license would prevent you from selling it externally if it produced using iBA. You could of course freely give it away, or sell it via the iBookstore. If I were you I'd be using Pages - much friendlier to use (less bugs, more mature) and if you need the extra features you can import into iBA.
-
How can people without Macs use iBooks Author?
Hi,
How can PC people use iBooks Author?
Thanks,
ElaineiBooks Author is a Mac only application. As of now there is no Windows' version available.
-
Can I create books for iPhone using iBooks Author?
Can I create books for iPhone using iBooks Author?
There is a new $5 iBooks Creator app in iOS app store for the iPad.
The output looked pretty good for an iPad app.
There is a video on how to use it to give you an idea of how easy it is.
It creates ePub 2 whihc can be read on all platforms with an ePub reader except Amazon Kindle whihc forbids such things.
You can run the ePub through Calibre and get MOIB for Kindle which works for me.
I have done thirty or forty conversions so far. -
Title says it. I created a textbook using Ibooks Author and want to load it on my class set of 30 iPads that are used by 5 different groups of students throughout the day. It is not a 1 to 1 device. Is there a problem with doing this as the Apple ID would be a generic that downloads the content many times on each iPad for my students?
The two processes are so unalike that you need to bone up on what they involve before answering, I think...you can't just shrug and expect specific help, sorry.
See iBooks Author: Publishing and distribution FAQ - Support
Distribution isn't automatically like iOS apps, where the store is involved by default.
You are free to put your .ibook file on a school server/your own server, and anyone can download for free and use it, independent of any Apple ID and the app store. If you want to restrict to your school/students, put it behind a login.
You can put it in the store as a free download and any Apple ID can download and use via any iTunes Account. If you sell via the store, each download/purchase is tied to the Apple ID used to facilitate that transaction. This is not a requirement.
Again, you need to become more familiar with the distribution process and not worry so much about the Apple ID scheme involved at the moment so you can make an informed decision, I think -
How can I add a color bar scale to a CW3DGraph
I am using the CW3Dgraph control (parametric surface plot) in a LabVIEW program I have written to graph the the strength of an electromagnetic field over a sphere. The plot color map style is set to use the "color spectrum". I would like to add a color bar scale to the graph so the user can determine the approximate field strength by the color of the plot. Is there an example that could help me with this, does anyone know how to add a color bar scale, or is there some other way to indicate to the user the color's level?
I think if you search this forum you will find more than one approach to this quest.In this thread you will find an earlier discusion of the same nature that has a couple of methods you can try out.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Can't Add to Bookmarks Bar in Safari
I can't add to my Bookmarks Bar in Safari. I would appreciate any suggestions to remedy this.
Thanks,
Tony
MacBook Pro, 15-inch, Early 2011
Processor 2.2 GHz Intel Core i7
Graphics Intel HD Graphics 3000 512 MB
Software OS X 10.8.2 (12C60)Parental controls may be turned on
Parental controls can prevent you from adding bookmarks. Check with a person who has an administrator account on your computer.
http://support.apple.com/kb/PH11870 -
Hello everyone.
I got this strange problem with my quicktime since 3 days ago.
every time I view a quicktime movie online in my browser the whole movie control bar turned into black.
it still functions , I just can't see it.
Any idea.
ThanksNope, no solution or comment other than "Apple doesn't support 64bit Windows".
It was working for me a long time ago, but it broke with an updated version of QT, somewhere around 7.0.X
And unless you specifically pick IE 64bit, you're probably running 32bit QT Plugin inside a 32bit web browser anyways. There shouldn't be a problem other than Apple broke something and doesn't care to fix it.
http://discussions.apple.com/thread.jspa?threadID=854430&tstart=0 -
How can I add a Progress bar to show the "render to JPG" progress?
Hi everyone, I have a button which renders my component to
JPG.
How can I attach a progress bar to show the progress of the
rendering?
<mx:Button label="render" click="renderasJPEG ()"/>
public function renderasJPEG( ):void
convertToImage( component001, new JPEGEncoder( 100));
private function convertToImage( object:IUICompon ent,
encoder:IImageEncod er):void
var base64string: String = ImageSnapshot. encodeImageAsBas
e64(
ImageSnapshot. captureImage( object, 72, encoder));
var variables:URLVariab les = new URLVariables( );
variables.encoded = base64string;
variables.type = "jpeg";
var request:URLRequest = new URLRequest(" script_saveasima
ge.php");
request.method = "POST";
request.data = variables;
navigateToURL( request, "_blank");
Thanks in advance.Hi,
I would have thrown a prompt to the user in the renderasJpeg
function and removed it in last line of convertToImage function.
Isn't this what you want?
Hope this helps. -
How can I add logic control with timeout in OSB?
In the proxy service, when I try to call business service, the business service may timeout, how can I add logic with this? Like, I can set the timeout to 20 seconds, if more than 20 seconds, then do something else. But I just want this service can set to 20 seconds, others may different. Is that possible? Thanks.
There is a Read Timeout and Connection Timeout setting in the Business service configuration.
You can change the default values and test.Inside the error handler you can choose to do something else after you 20 seconds.
Test and let us know if it works. -
Can you customize a control bar button function
I am a content designer, not a programmer, but I do like to
tinker.. and NEED to figure out how to change where the control
bar's EXIT button takes the user. I post my courses in the Pathlore
LMS, and right now, if somebody clicks the X on the control bar, it
closes Pathlore.
I want it to just either close that window, or take them back
to the previous screen but I see no way to do that with the control
bar control, or in the SKIN. Right now, Captivate assumes that all
users watch the movie to its end.. they do NOT.
A thousand thanks, the crabby programmer where I work told me
to figure it out for myself but I am a designer, not a programmer,
and feeling very lost and frustrated with Captivate right now.A thousand kisses to Dilbert. I think I know enough Flash to
figure this out. Just pointing me in the right direction is a
wonderful thing.. why doesn't Adobe/Macromedia publicize this
more??? I thought this program was supposed to be for mere mortals.
THanks
Maybe you are looking for
-
How do I stop icloud contacts from overwriting or superseding iphone contact entrees
If i enter a new contact on my Iphone it eventualy gets wiped out (Deleted). i assume this is because it does not exist on the cloud. If i enter a new contact in the cloud, it emediatly apears on my Iphone. Nice! i like that, but i want to be abl
-
Charge 5 times for the same invoice
Charged 5 times for the same invoice
-
Where to find which plant has a particular factory calendor?
Hi Where can i find that which plant has been assigned to which factory calendor? Transaction SCAL helps to display calendor if i know the calendor ID...But i want to know factory calendor for a particular plant?? Please give your comments Rgds
-
Error Occured. Please check your settings and try again while opening a RTF
Hi, I'm having the above error while opening a template in MS-Word to create BIP Reports. I see a lot of messages on the BIP forum with similar error. Could anyone over there help on this issue please. Thanks Aravind
-
[SOLVED] Terminator, "you need to install python bindings for libvte"
Upgrade terminator to 0.96-3, with new dependency to vte3. It suggested to remove vte, which is not needed any more. So I followed the suggestion. Then I can't open terminator! Got a error dialog "You need to install python bindings for libvte". Fina