Can I add a new Employee Type through DIAPI 2005?

Hi as part of my addon setup I would like to automatically add a new Employee type to the OHTY table. 
Is there an object in the DI that I and can use to do this? I have had a look but can't find anything, but wondered if there is a generic object that is used update simple tables such as this one?
Thanks,
Daniel

Hi,
And Have you find one answer for this problem ? because I have also this problem and I ask myself for others table.
Thanks
Stéphane

Similar Messages

  • How can I add a new entry for determining a requirement type

    Dear Friends,
    How can I add a new entry for determining a requirement type
    via Item Category + MRP type,  I see no new entries selection.
    This is in  Avb Check & TOR-> TOR-> Determination of req type using transaction.
    Please help.
    Regards
    Ravi.

    Availability Check and Transfer of Requirements > Transfer of Requirements > Define Requirements Types ?
    Just one node above?
    Never mind, you need to add entry on item category:S

  • Can't add a new POP or Exchange Account since SL

    My existing accounts upgraded and are working fine, but I can't add any new POP account or Exchange account since the upgrade.
    Mail won't save the password for the new account in any of the preference settings. When I finish the set-up Mail keeps asking me to type in my password. When I do it keeps giving me a message saying the password was rejected by the server.
    I repaired keychain access and deleted any keychains associated with the new account I was trying to add. Didn't help. I had my ISP open port 25 while on the phone with them. Didn't work. I've gone into the Advanced Tab and edit server list and tried every setting possible. Tried with authentication and without. I've tried it from a new desktop and from the one where my existing accounts are. I've tried turning the new account which is working on my iphone off and then adding it to Mail. No luck.
    I don't know code. Any other work around suggestions?

    I can't add the new account to even get to the point where I could send or receive. I go through the entire set up but the account never goes online. Once i have it all set up is where I started playing around with the port settings, etc. Still have never been able to get it online. The account works fine on my iphone. An account with the same isp provider that was already working in Mail before SL is working fine. I upgraded a new imac that I bought in July and a 3 year old one. Same problem on both. Can't add a new POP AT&T Yahoo account or an Exchange account to Mail 4.0. I've read other threads and tried several different trouble shooting suggestions. I repaired the keychain. I've deleted the passowrd from keychain and tried re-entering them. The password never saves in the Mail preferences for the new account I am trying to add. At the same time every time I am prompted to type in the password it tell me the password is rejected. I tried changing the username like you mentioned. Tried just the user name alone and with the extension "@att.net". Didn't help.
    Any other ideas?

  • How to add a new payment type

    Hi,
    We need to add a new payment type in Oracle Applications 11i and I could not find the required setup steps. The Form Name is : APXPAWKB
    The user's navigation is as follows:
    Payables super user responsibility->Payments -> Entry ->Payments:Type:
    There is a LOV with Manual, Quick and Refund and we need to add a fourth one as Elses.
    How can we do this?
    Thank You...

    Hi,
    You cannot define a payment type as that is based on a lookup defined under the navigation Setup>lookup>Payables.
    This look up access level is System whihc implies it does not allow user level values to be defined.
    So you have to use the available payment types,
    Thanks
    Manish Jain.

  • How can I add a new line item for production order?

    HI all,
    How can I add a new line item for production order through BAPI/FM? Thanks in advance.

    Hi Mil,
      Unfortunetly SAP is not in front of me.
    But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
    Reward if useful!

  • How can I add a new column in compress partition table.

    I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    COMPRESS PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    Note :
    When I create table with this clause it will allow me to add a column.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.

    Hi Fahed,
    I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
    Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
    Topic : When to Use Table Compression
    Bug
    Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
    BUG:<2421054>
    Affects: RDBMS (9-A0)
    NB: FIXED
    Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
    Details:
    This is an enhancement to allow "ALTER TABLE" to ADD/DROP
    columns for tables using the COMPRESS feature.
    In 9i errors are reported for ADD/DROP but the text may
    be misleading:
    eg:
    ADD column fails with "ORA-22856: cannot add columns to object tables"
    DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
    Note that a table which was previously marked as compress which has
    now been altered to NOCOMPRESS also signals such errors as the
    underlying table could still contain COMPRESS format datablocks.
    As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
    Best Regards,
    Muhammad Waseem Haroon
    [email protected]

  • How can I add a new message(custom text message) to the holiday approval em

    How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
    TIA

    The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
    For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
    JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
    So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
    The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
    It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

  • How can i add a new user and change user'password with javamail?

    how can i add a new user and change user'password from a mailserver with javamail?
    email:[email protected]

    Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
    if it is linux...u have to use some shell programming\
    bye for now let me know if this guides you or if you need some more stuff.
    bye

  • How to add a new data type of oracle to SIM(7.0)

    Hi........
    I need to add a new data type(CLOB) to SIM of oracle .can anyone tell me how to modify or add this new data type.
    Any pointers to this will be highly appriciated.......
    thax in advance...

    Hi,
    Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
    You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
    Maybe there are other ways, but this works.
    Success,
    Rob

  • Just updated to iTunes 10.2.1 and now can't add any new songs.

    My MACbook is running 10.5.8 and just last week I updated to iTunes 10.2.1 but now I can't add any new songs at all. I go through the motions but when I check the "recently added" checklist, it's blank. The song is never added to my iTunes library. Is there a fix for this?

    RESOLVED.
    I tried updating iTunes to 10.2.2 thinking this might somehow help me but same situation. Upon further investigation, the set of MP3s I was trying to add didn't  have the typical MP3 logo on them. When I tried to delete them from my system, it said "in use by application". I forced a delete. I copied the MP3s again to my MACbook and this time was successful in adding them. Looks like it was a bad set of MP3s and not iTunes.

  • Can v define a new absence type without changing the grouping.

    Dear friends,
          can we define a new absence type without changing the employee subgroup grouping and psg.
    my requirement is i have a absence type lop which has 1 as esg and 28 as psg.as per my pcr i have to cumulate total lop hours and deduct from total working hours.
    can any one tell me how can i modify the absence type so that i can use it in my pcr.
    Regards,
    sai prasad

    Dear sreenu,
        if i create a time type.can i refer in this
    following pcr
    5200
    ADDWT *       NUM=GSAP**
    ADDWT 5310
    if yes, can you plz tell me how can i do it

  • HT1711 how can i add a new card to pay for my music on itunes

    how can i add a new card to buy songs from itunes

    Hi...
    If you are referring to an iTunes gift card, follow the instructions here >  iTunes Store: How to redeem a code
    If you are referring to editing your payment method, you can do this on your iPod touch.
    Tap Settings > Store > Use Existing Apple ID and sign in.
    That should take you the Account Setttings window where you can change your payment type.

  • How can I create a new Numbers Document through AppleScript?

    How can I create a new Numbers Document through AppleScript?
    I try this:
    tell application "Numbers"
    make new document with properties {template name:"blank"}
    end tell
    But don't work.
    Where can I find documentation about it?
    Thanks

    If you try to invent your own syntax, you are starting on very wrong basis.
    The required syntax is defined by the Numbers AppleScript's dictionary.
    This one doesn't know what is a template.
    This is why, in the link posted by badunit, I use an other scheme to create a new document.
    I know that it's awful but it's the only one available at this time.
    Yvan KOENIG (VALLAURIS, France) samedi 4 juin 2011 11:25:25
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Can I add a new phone user to my itunes account without overriding my phone data?, can I add a new phone user to my itunes account without overriding my phone data?

    Can I add a new phone user to my itunes account without overriding my phone data?

    Read this
    http://support.apple.com/kb/HT1495

  • Can't add a new event to iCal on my iMac - but the event sync's to my iPad - is this a Lion problem? iCloud is on.

    Can't add a NEW EVENT to my iCal on my iMac- however the event is sync'd to my iPad with no problem. iCloud is turned on for iCal. Is this a Lion problem or something turned pff. I cannot find an answer. Help?
    Williamfronsc

    William,
    It is a possibility that you are adding new events to your "On My Mac" calendars.
    "On My Mac" calendars will not sync with iCloud. After backing up the "On My Mac" calendars, and ensuring that all events are duplicated on your iCloud calendars you can delete any "On My Mac" calendars.
    For further troubleshooting advice read iCloud: Troubleshooting iCloud Calendar.

Maybe you are looking for