Can I add a new trigger to the beginning instead of at the end of a blank composition widget?

Hi guys,
I am creating a photo gallery page using the Blank Composition widget. I want to be able to add new content regularly by adding new photos to the top (beginning) of the gallery so my newest photos show at the beggining of the gallery.
Currently, the little + symbol to add another trigger only adds a new trigger to the right (bottom) of group of triggers, effectively putting newly added content to the back of the gallery instead of at the front. Am I able to get it to add a new trigger to the beginning of the group and have that trigger be the first in the group to display?
All the widget's seem to display this same order behaviour, so I'm quite stuck on how to get around this. I've tried re-arranging the triggers, but that has become insanely cumbersome every time I want to add new photos to the beginning of the group and move the older ones further down the gallery order.
Any help would be greatly appreciated with this, cheers, David.

OK
I'm a newbie.
I have the same problem. I've looked at some recommended 3rd party widgets and they don't do what I want either.
Another method would be to start a nabble.com blog and embed that in to Muse, but then the news would not be seen by web crawlers and benefit your ranking on your own page. (I think)
This is a rubbish work around but, I'm going to add a new news widget every month. I only get 5-6 bits of news a month, so by adding a new widget above the last each time, that will push the old news down the page.
Hope this helps someone.
Jay

Similar Messages

Need to add a new row at the end of the table

Experts,
working jdev 11.1.1.3.0
i am adding row programetically, my requirement need to add the row at after last row.
i tried different ways.
Row newLastRow = getPWBBidLaneVO().last();
int lastRowIndex = getPWBBidLaneVO().getRangeIndexOf(newLastRow);
getPWBBidLaneVO().insertRowAtRangeIndex(lastRowIndex - 1,
laneRow);
this is giving --- java.lang.ArrayIndexOutOfBoundsException: 0
and
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html --- its giving index out of bound because vo.getRangeSize() is 25. We set this value at vo for performance improment suggestions.
is there a way to add a new row at the end of the table?

Add this to the view row impl class
       public void insertRow(Row row) {
           //go to the end of Rowset if it has rows
           Row lastRow = this.last();
           if (lastRow !=null){
                //insert new row at the end and make it current
               int indx = this.getRangeIndexOf(lastRow)+1;
               this.insertRowAtRangeIndex(indx,row);
               this.setCurrentRow(row);
           }else { // empty Rowset
           super.insertRow(row);
           }

How can i add a new function to the Basic IVI class vi's?

I need to use the IVI vi's to control some instruments, let's say a DC Power Supply.
Since there's a DC Power supplyclass, i can used those VI's but waht if one of the VI's does not contains all the functions that i need?. How can i add more functions to the IVI classes?. What do i need to do to add a new function to the iviFGen class?

If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance

How to add a new line at the end of eTEXT file

Hi,
I have modified the RTF template for the R12.1.3 Positive Pay File report (IBYPOS_PAY_en.rtf). Everything is good, except that the bank requires a "T" (Capital T) character in a new line at the end of the text file. Has any of you came across this before? How do I modify the template to achieve this?
Thank you,
Sinan Topuz

I believe this is related to BI Publisher. Any comments would be greatly appreciated.
Thanks,
Sinan

How can you add a new rule in the inspector?

I've grown very accustomed to the Chrome developer tools, and I've recently decided to try out Firefox.
Best I can tell, you cannot add custom rules in the Firefox inspector tab. For instance, if I inspect the element on an image in Firefox, I am given all the defined styles (rules) for that element. I can, of course, edit those defined styles. However, it does not give me an option to add my own custom styles unless I jump over to the 'Style Editor' tab and write them in manually. This becomes a problem when I want to write in a quick :hover or a :first-child or reference any other selecter that's not already defined.
In Chrome, not only do I add/remove/change styles directly in the Inspector, but it also saves a custom inspector stylesheet for me with all the changes I made.
Chrome example: http://cl.ly/Wm56
Firefox example: http://cl.ly/WmUP
Is there any way to add custom styles directly from the inspector tab in Firefox?
Thanks!

You will notice an element {} item at the top of the Rules list in the right plane.
You can click between the curly brackets {} to enter a new inline rule for this element.
You can do this within other rules {} as well.
Type the colon to separate the property name and value.
That is easier than adding a style attribute in the left pane or editing a style sheet file.
That should work as well as rules added this way show as a style rule.
*https://developer.mozilla.org/Tools/Page_Inspector

Can not add a new member to the existing log group.

Dear all,
I just want to multiplex the online redo log to different devices for security reason. I just have one member for each group. So I want to use this command to add a new member.
alter database add logfile member '/u02/oracle/oradata/TEST/redo01.log' to ('/u01/app/oracle/oradata/TEST/redo01.log')
or
alter database add logfile member '/u02/oracle/oradata/TEST/redo01.log' to group 1.
But both commands failed with error pasted below:
ERROR at line 1:
ORA-19510: failed to set size of 102400 blocks for file "/u02/oracle/oradata/TEST/redo01.log" (block size=512)
ORA-27045: unable to close the file
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Do you know what caused this problem?
Thanks,
Ricky

I just want to multiplex the online redo log to different devices for security reason. I just have one member for each group. So I want to use this command to add a new member.Not a BAD idea.. :)
ERROR at line 1:
ORA-19510: failed to set size of 102400 blocks for file "/u02/oracle/oradata/TEST/redo01.log" (block size=512)
ORA-27045: unable to close the file
Linux-x86_64 Error: 5: Input/output error
Additional information: 4It is running out of space. check the required space on mount point /u02 , if not you can create in another mount point as per your requirement.
THanks

How can I add a new section to the beginning of a song project?

I've been trying GarageBand on my new iPad 3 as a practice aid. I laid down some guitar cords, then dupped some sections until I got a whole 64 bar song. Now, how the heck do I add a couple of intro bars? If I try to add a new two bar section, it always stays stuck at the song end. If I stretch section 1 by a couple bars, it adds the bars at the end of section 1, repeating the last cords, not very useful.

If you open the section menu there is a tool consisting of three parallel lines. Tap this to reorder the sections.
tt2

How can I add a new vaiable to the file loaded by Property Loader without changing my script

I have an input file to my script that I load via Property Loader. The number of parameters in the input file may change from test to test.. Is it possible in some way to add a new parameter without changing the sequence file?
Is there for example a way to make the Property loader read parameters until end of file, and put the parameter into a temporary variable in my script?
Hope there is a way to resolve this.
Cheers
Claus Christophersen

Claus,
The solution you have is a valid one.
Basically you have a variable (global or local) and you import the expected parameter to this variable before you pass it to the hardware.
You use that variable as the input parameter you pass to your hardware of course.
You have to modify your source file depending on the test type you want to execute every time you want to change the test type though.
Another solution would be to use Data Markers in your file to separate the variable values corresponding to each test type.
Check the example I am attaching.
At the beginning I prompt the user for the Test Type (Type I or Type II).
Based on the type, I import the corresponding variables from the source file using Data Markers.
If you have questions let me know.
Attachments:
SourceFile.zip ‏8 KB

Windows SBS 2011 - I can't add a new user through the SBS Console

I have recently installed SBS 2011 and this is my first install of SBS since 2003.
After the installation I went to the SBS Console to add a new user and when I select 'Add a new user account' and base it on the Standard User account i get a message saying 'Add a New User Account failed', when i view the details for this it says "The User
Account cannot be added. Ensure that the Active Directory Domain Services service is running....
I searched the web for this and found the following which was not applicable http://support.microsoft.com/kb/958890
I then resorted to adding the users via AD Users and Computers and the modifying the value in the ADSI for msSBSCreationState to 'Created' and then it appeared in the console, i then used the console to change the user role for this account to Standard User.
But when i now click on the "Edit User Account Properties" action i get a pop up message from SBS Server saying "There is no such object on the server".
Any ideas on ow to fix this broken console would be appreciated.
Thanks,
Simon

Hi, using default names i AD will help. For everyone who lost original. grr...
http://i.techrepublic.com.com/blogs/february-2011-wstips-tip1-figa.jpg?tag=content;siu-container

Can not add my new printer to the print and scan preferences

I have purchased a Canon Pixma MG5350 and try to connect it to my mac but with no results. I have installed all the drivers but can not add it to the print and scan preferences. I looked in Applications > Utilities > System Information > USB and it does not even show that it is connected. The printer comes without a USB so I bought a 5m USB 2.0 A to B cable and eventually something is wrong. Is the USB too long, not the right one or what is the problem?

I have already got my refund for the cable! I tried a friends cable and everything works!

There was a "new window" and a "new tab" icon that could be dragged from the Customize window to the toolbar. In 7 & 8 there is still a "new window" icon but there is no new tab icon to be found in Customize. Where can I add a "new tab" to the toolbar?

'''bold text''' This feature was there prior to Firefox 7 but now it can't be found.

You can find the New Tab button showing as a '+' on the Tab bar.<br />
You can open the Customize window and drag the New Tab button that shows as a plus sign (+) from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
If you can't find the New Tab button then click the "Restore Default Set" button in the Customize window.<br />
If you want the New Tab button at the far right end of the Tab bar then place a flexible space to the left of it.
* New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

HT201303 I recently bought a MacBook Pro and want to purchase music in iTunes. Can I add my new computer to the computer list from which I can purchase music? I could switch computers if necessary.

I recently bought a MacBook Pro and am trying to purchase music from iTunes. For security, it says that I have a different computer trying to purchase music. Can I switch the computer I purchase my music from?

You can purchase music from up to 5 computers at once.
Just sign in and buy

How to add a new Element to the Context

Hello all.
I created in the wdInit()
ArrayList datas = new ArrayList();
     for (int i = 0; i < 25; i++) {
          MyData data = new MyData();
          data.setMethods();
          datas.add(data);
     wdContext.nodeMyData().bind(datas);
Now, I want by clicking on the Button "Create new Element", forward user to the other View, which elements are connected with the same model -> context, the new element should be added to context, the user should fill the form and click Save-Button.
How can I add a new Element to the Collection I created and choose it as a current element?
If I do: wdContext.nodeMyData().bind(new MyData()) all information will be lost. And I will have only one field.
If I do it like this:
IWDNodeElement dynTabElem=(IWDNodeElement)wdContext.nodeMyData().createElement();
wdContext.nodeMyData().addElement(dynTabElem);
I get an error: com.sap.tc.webdynpro.progmodel.context.ContextException: NodeInfo(DataComp.MyData): value node is created without a reference
Well I can pass to my new View a Collection as a parameter and then
Collection.add(new MyData()) and then bind it. But I find this solution not good.
Is there any possibility to get the existing Collection from the Context without passing it to the view?
Can I just add a new element to the existing collection?
Thanks in advance.

Hallo Monalisa,
I did as you said. But I can't add something to my model class, because it is not collection.
                        MyData data = wdContext.currentBelegElement().modelObject();
               data.add() ???? - don't work
               wdContext.nodeMyData().invalidate();

How do I add a new panel to the accordion widget in-between two others (NOT at the end)

In the accordion widget, the + button at the bottom adds a new panel to the end. I have a series of panels that are in alpha-sort and need to add a new panel in the middle... I can't figure out how to do it without re-doing the whole thing. is there a way to do this?

Gah! Thanks Mac.
That was the first thing I tried! I must not have had the right level selected. It's been driving me batty, but I've got it now.

Add a new field in the Tab Addicional data en la ME22N

Hi,
Please, can anyone tell me how can we add a new field in the tab Addicional data en la ME21N? I have to use the MM06E005, but I don't know which screen exit should I use and also how to add this subcreen in the tab Addicional data.
Thanks in advance.
Saida.

Hi,
using SE80 you can add your fields with subscreens
SAPLXM06 0101 for Headerfields
SAPLXM06 0111 for Items.
This will add a tab in ME2..N.
if you want your own Text on the tabstrip just edit the Textsymbols
101 and 111 from SAPLXM06.
At output you have to open a module asking the gl_aktyp to switch edit/display mode.
then you must code the Exits to import/export values
EXIT_SAPMM06E_006
store transaction type for later modification of screen attributes
gl_aktyp = i_trtyp.
gl_no_screen = i_no_screen.
store current state of customer data in ekko_ci (structure for screen)
ekko_ci = i_ci_ekko.
store reference document
if i_rekko-ebeln ne gl_rekko-ebeln and
not i_rekko-ebeln is initial and
gl_rekko-ebeln is initial.
ekko_ci-zzemail = i_rekko-zzemail.
gl_rekko = i_rekko.
endif.
EXIT_SAPMM06E_007
move-corresponding i_ekko to gl_ekko_ci.
EXIT_SAPMM06E_008
e_ci_ekko = gl_ekko_ci.
ekko_ci contains the actual values of the Dynpro fields
e_ci_update is only set if you really want the fields
on the Dynpro to be saved. You must set it then to 'X'
the field ekko_ci-zzflag will here only be saved if there
was a change and the transaction is not in display mode
if gl_ekko_ci-zzemail ne ekko_ci-zzemail.
e_ci_ekko-zzemail = ekko_ci-zzemail.
if gl_aktyp ne 'A'.
e_ci_update = 'X'.
endif.
endif.
Regards
Kiran Sure

Can I add a new trigger to the beginning instead of at the end of a blank composition widget?

Similar Messages

Maybe you are looking for