Can i add a single 8GB or ram with my already installed 2x2 GB of RAM?

I need to upgrade my RAM. I have the original 2x2GB of RAM installed but want to know if i can add a single 8GB of RAM with the 2x2GB already installed? Please help?

Here is some info; and below that is an excerpt which appears to apply to your model:
http://support.apple.com/kb/HT1423?viewlocale=en_US
Additional notes i5 and i7 Quad Core iMac computers come with both top memory slots populated. These computers will not start up if only a single DIMM is installed in any bottom slot; these computers should operate normally with a single DIMM installed in any top slot. Core Duo iMac computers should operate normally with a single DIMM installed in any slot, top or bottom. ("Top" and "bottom" slots refer to the orientation of the slots in the pictures below. "Top" refers to the slots closest to the display; "bottom" refers to the slots closest to the stand).
Now I always get confused which slots Apple deems to be the top or the bottom on the newer Macs - they seem to be looking at it from a different angle than I am. Yours is a 2011 - do you still have two rows with 2 slots each? Yours is working and recognizing it; if I remember correctly Apple calls the top what I'd call the bottom when the iMac is laying screen down. In any case, you should be fine as long as it's working.

Similar Messages

I have an iMac 5,1 with an Intel Core 2 Duo. I'd like to be able to use iCloud, but need Lion which is too big. How much memory can I add? And will this upgrade allow me to install Lion?

I have an iMac 5,1 with an Intel Core 2 Duo. I'd like to Lion, in order to use iCloud, but the specs indicate I don't have enough memory. How much memory can I add? And will this upgrade allow me to install Lion?

I believe your model iMac can address 3 GB RAM; the minimum for Lion is 2 GB - however, that is an absolute minimum for very light use. You would be much happier with a minimum of 4 GB.
http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-20-inch-sp ecs.html
(You can install 4 GB, but it will only be able to address about 3.1 - 3.2 GB)

Can not add item to the shopping Cart with FireFox 8.0

I can not add items to the shopping cart with Firefox 8.0. Switch to IE everything works then.

Such details are stored in a cookie, so make sure that you do not block cookies on that site.
*Tools > Page Info > Permissions
You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page via the location bar.
*http://kb.mozillazine.org/Cookies
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled

How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there.

How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there. I could add links w/ the previous OS. Time sensitive project.

Which application are you using?
Clinton

Can I add a watermark to a video with photoshop CS3 Extended

Can I add a watermark to a video with photoshop CS3 extended or Web Premium 3, and if I can how do I do it?

Import the video as a new video layer (Layer --> Video --> New layer from file), add your watermark as another layer, then export the whole shebang using File --> Export --> Render Video. Be aware though, that there are severe limitations in what formats Photoshop accepts, exports and how they are compressed, so you may wish to check out After Effects or other tools...
Mylenium

Mb sound not working. Can i add a sound card to work with PP cs6?

I have a sabertooth x58, pc, win 7. I lost the audio monitoring all of a sudden. Also tryed windows media player & all windows sounds are not being played as well. Tryed absolutely everything. Need to go to plan B.
Can i add a sound card to work with PP cs6?
http://www.newegg.com/Product/Product.aspx?Item=N82E16829132052

>Tryed absolutely everything
What does that mean?
Have you removed the sound card driver via control panel and let Win7 reinstall?

[Win]: Can't install ExtendScript ToolKit 2 - Problems with an already installed E'Script T'Kit 2?

Hi
I have problem to install ExtendScript ToolKit 2. I had installed ExtendScript ToolKit 2 and removed it with the Uninstaller. Now I want to reinstall it but it doesn't work. The setup says there is a conflict with the already installed ExtendScript ToolKit 2, but I have removed it.
What can I do?
I have searched in the registry about keys with the ExtendScript ToolKit 2 and removed it, but no success. I have searched in the file system for ExtendScript ToolKit 2 and removed all, no success.
How can I force the installation?
Thanks
Hans

I have just had exactly the same problem and I ended up telephoning Adobe support - officially free products such as the ExtendScript Toolkit 2 do not get telephone support.
The person I spoke to at Adobe suggested I run the CS3Clean utility, and that worked for me. See http://www.adobe.com/go/kb402767
BE SURE TO READ THE INSTRUCTIONS IN FULL FIRST
In my case I only needed to run level 1 in the utility. Bit of a pain though to have to uninstall everything and re-install.

Add-on installation failed because another version is already installed

when desinstaler addon, and soon trying to install he himself addon but with a superior version, does not leave. Since it says that it must be a later version, when it is it. There is some site where cleans the registry of addones installed?
the message is : "Add-on Ficheros de banco: Add-on installation failed because another version is already installed. Ensure that the version number is higher than the version previously installed."

The best way is to go in Addon-Project Development and in its Bin directory change its exe name. for example it its exe name is abc.exe then change it to abc1_0.exe
It will work properly.
Regards,
Ganesh

Can I add a single app subscription (e.g. Premiere Pro) to my Photographers Package subscription?

Hi,
I currently subscribe to the Photographers Package for $9.99/month, which I'm more than happy with. However, now I also want to subscribe to the Premiere Pro app.
Can I just add the Premiere Pro single app subscription to my current plan, therefore paying $9.99/m for the Photographers Package + $19.99/m for Premier Pro?
Thanks for any help.
Ste

Thanks for your replies; however, they both contradict each other so I'm a bit confused.
Rajshree - if I purchase the whole creative cloud then I would expect to have access to all the apps, not just two. But this is not what I want. Surely, as John T Smith states, I should be able to add a single app subscription to my plan - how else can someone mix-and-match the products they want?
Thanks again.

Can not add function to pages-document created with Applescript

If I create new document using the GUI (New document) I can place the cursor within any table-cell, type "=" (equal sign) and f.e. "2+2" which will result in a cell showing a "4".
If I create a document with Applescript, I can not add new functions (neither by typing = nor by using Insert >> Function (may be different, I have German version here). Already existing functions (which already were in the template) can still be used and work as expected but can not be altered.
Any idea?
I use Pages '08, Version 3.03
Code I used to create the document:
tell application "Pages"
launch
make new document at front with properties {template name:templateName}
# Angebotsnummer ins Dokument schreiben
tell body text of front document
make new paragraph at after paragraph 1 with data angebotsNr
set paragraph style of paragraph 2 to "Überschrift"
end tell
# Datei abspeichern
set dateiName to missing value
repeat until dateiName is not equal to missing value
set dateiName to text returned of (display dialog "Datei Name:" default answer angebotsNr & "_" & kundenName) as text
end repeat
save front document in angebotsOrdner & dateiName
end tell

I apologize but the given script can't run.
The variable templateName is undefined.
The variable angebotsNr is undefined too.
About the described behavior, it's a bug which I never discover before.
It's always striking in Pages '09.
Here is the report which I filed :
Bug ID# 8704270
Summary:
+Odd behavior of tables in Pages documents created by a script+
+Steps to Reproduce:+
+Run this huge script+
+tell application "Pages"+
+make new document at front with properties {template name:"Blank"} (* "Vierge" on French systems *)+
+end tell+
+Insert a table+
+try to insert a formula+
+Expected Results:+
+I assumed that I will get the formula editor which I get when the document is created by hand+
+Actual Results:+
+There is no way to get the editor, no way to insert the equal character.+
+This odd behavior strike in all versions of Pages '09 and Pages '08+
Regression:
+None to my knowledge+
Yvan KOENIG (VALLAURIS, France) dimanche 28 novembre 2010 11:30:29

Can we add member directly in to dataforms with out editing dataform layout

Hi All,
i have a query regarding dataform can we add member in to dataform with out editing dataform layout .
Member is already in dimension hirerachy . but in my scenario user want to add member directly to dataform with out editing its layout
is it possible ? if its possible how please let know how it is possible.
Thanks in advance please help me out
Regards,
SM

You can add row/column layout you can select: Allow users to dynamically add rows.
It will "Enable users who have write access to the data form to dynamically change and refresh the data form’s definition by adding rows. Selected members that they can access display on the data form. You cannot simultaneously select Allow Users to Dynamically Add Rows and Suppress Missing Data. "
Enabling Users to Add Rows:
http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch06s03s15.html
Cheers..!!!
PS: I can see that you have asked 8 questions are all of them are unresolved, its a good practice to mark the answers as correct or helpful, if you think they helped you and close the thread once your got your answers.
Here are few Ex:
hyperion planning
hyperion planning workforce &capex
Edited by: RahulS on Aug 17, 2011 6:09 PM

How can you add a where clause using "OR" with applied ViewCriteria?

[JDeveloper 10.1.3 SU4]
[JHeadstart 10.1.3 build 78]
I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
"I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
Toine"
Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting"
Anyone knowing the answer or am I asking for an enhancement?
Toine

Hi,
Can you SET your whereclause as follows ?
('Y' = <isAnd>
and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
OR ('N' = <isAnd>
AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
)

How can I add a row into a JTable with JButton

Hi all. I have the following code:
package gui;
import db.*;
import javax.swing.table.AbstractTableModel;
import java.util.ArrayList;
public class FoundersTable extends AbstractTableModel{
    private static final int COLUMNS = 8;
    private String columnNames[] = {"�� ", "��", "��", "��", "��", "��",
            "�� ", "�� , ��"};
    private ArrayList data;
    public FoundersTable(){
        data = new ArrayList();
    public int getRowCount() {
        return data.size();
    public int getColumnCount() {
        return columnNames.length;
    public String getColumnName(int colIndex) {
        return columnNames[colIndex];
    public Object getValueAt(int rowIndex, int columnIndex) {
        return ((ArrayList)data.get(rowIndex)).get(columnIndex);
    public void setValueAt(Object value, int rowIndex, int columnIndex) {
        ((ArrayList)data.get(rowIndex)).set(columnIndex, value);
        fireTableCellUpdated(rowIndex, columnIndex);
    public void addRow(ArrayList neueZeile) {
        data.add(neueZeile);
        int index = data.size() - 1;
        fireTableRowsInserted(index, index);
    public void removeRow(int index) {
        data.remove(index);
        fireTableRowsDeleted(index, index);
    public void removeAllRows() {
        data.clear();
        fireTableRowsDeleted(0, 0);
    public boolean isCellEditable(int rowIndex, int columnIndex) {
        return true;
}Now in my MainJFrame class I have one button for additing and one button for removing a selected row. How can I add/remove rows with this two buttons.
Thanks

No my question is how can I add and remove rows WITH buttons My point was the code is the same. You use the addRow(...) method. Why did you write an addRow(...) method if you aren't going to use it?
I don't understand your problem. Do you not know how to write an ActionListener?

HT1539 can i add my digital copy to itunes with out using the disk? my netbook does not have a disk drive and i want to add my movie to my ipod can i do it with out the use of the disk and just the code?

Can I add my digital copy movie to my iTunes with out using the disk, my gateway laptop/netbook does not have a disk drive I have the unused code and everything, I just can't stuck the movie into the computer itself and my desktop computer has no internet on it. Is there a way to add my movie to my iPod touch 2nd generation tuning 4.2.1

Hiya!
It depends on what kind of digital copy you have. This article goes ino details regarding the two types, and depending on the type you have, you may or may not need the DVD to redeem the code.
Transferring video from DVDs with iTunes digital content
http://support.apple.com/kb/HT1539
I hope this helps! Best wishes and good luck!

Can't add Lightroom 4.4 to "open with" menu

Since the recent 4.4 update I can't add Lightroom 4.4 to the Windows 7 right click "open with" menu. When I try to add Lightroom.exe to the menu it simply doesn't get added.

It looks like the file association is broken for Lightroom because of which you are getting this issue.
There could be a Windows Registry tweak for this but Uninstall and Re-install Lightroom should be easy and safe fix.

Can i add a single 8GB or ram with my already installed 2x2 GB of RAM?

Similar Messages

Maybe you are looking for