Can I Add A TimeCode In Premiere Elements 9?

Hey everyone,
Can I add a timecode that plays on the exported video in Premiere Elements 9?
If so, how?
Thanks in advance!

I also believe that DVDate can add a TimeCode Effect.
I use either Premiere Pro, or After Effects, both of which offer a TimeCode Effect, best applied to a Transparent Video on a Video Track above, so I have not needed to explore any 3rd party apps.
Good luck, and let us know what you find, and what works best for you.
Hunt

Similar Messages

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

Hi Steve,
Thanks for your quick response. The original movies were taken on a Canon ES970 (1990's). I don't know the resolution but things were not as high tech back then.,.. I used a Roxio software to convert them on my MacBook Air. I didn't realize that I could use Adobe Premiere Elements to do that or I would have. However my old camera did not have a cable to attach it to a computer and the Roxio software came with it.
I then saved the recordings on an external hard drive. I did not make movies from them using iMovie or edit them in any way. They are simply .MOV files and they can be played on my Mac. Upon realizing how much memory it takes to work on videos, I decided it might be easier to burn DVD's on my husband's new Dell desktop that came with Windows 8. I downloaded Quicktime as suggested and still the movies can't be added to Premiere.

Can't add jpg files to Premier Elements 9 timeline

When I try to add jpg files to Premiere Elements 9 timeline, I get an error saying "This file is not supported, or the required codec is not installed". Windows 7 can open/display every one of the jpg files. Photoshop Elements can open them as well. I appreciate any help.

Hi Steve,
I tried to send you an e-mail ,but, your box was advised as"full". I can understand why somehow you closed the Forum on "Very disappointed with Premiere Elements". I would like to thank you for the advice you have indirectly given me on other technical matters. I cannot understand why Adobe do not allow their own Technicians to have an input to these Forums. I continue to be disappointed to Adobe Technical Phone and internet support in the Oceania Region .
Regards

How can i add css styling to all elements within a symbol.

How can i add css styling to all elements within a symbol.
For instance.
If i have a symbol call "data" and within this i have 4 elements called 1,2,3,4 how do i add styling to all these elements without having to re-write code for each element.
I know i can style a symbol called "data" by :
sym.$("data").css("font-family", "baumans, sans-serif", "font-size", "15px");
...But this does not style the content of the elements 1,2,3 and 4
If i were using standard CSS and HTML then all div's within a div called "data" would be styled the same.
help "my friends of the code"

Hi Justin,
1) You have a syntax error here: sym.$("data").css("font-family", "baumans, sans-serif", "font-size", "15px");
sym.$("data").css({ "font-family": "baumans, sans-serif", "font-size": "15px"} ); // correct
sym.$("data").css( "font", "15px baumans, sans-serif" ); //correct
2) Then, loading the jQuery file is not required. You can create a class or change tags.
How to add a class:
Changing tags:
You've got 2 demo files (Edge 5.0) here: class or tag.zip - Box

How can i get live help for premiere elements 11

how can i get live help with premiere elements 11

Click I STILL NEED HELP at this next link for Premiere Elements chat
-http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues

I have snow leopard and can't install disc 2 of premiere elements 9 anyone?

have snow leopard and can't install disc 2 of premiere elements 9 anyone? the disc ejects after i try install.

Sorry you're having trouble, alan4555, but most of the video experts hang out in the Premiere Elements forum, which is here:
http://forums.adobe.com/community/premiere_elements
and you'll probably get better help there. Good luck!

Can a video created with Adobe Premiere Elements 13 be converted to run on Adobe Premiere Elements 11?

Can a video created with Adobe Premiere Elements 13 be converted to run (and be edited, etc.) on Adobe Premiere Elements 11?
I have several hours invested in a video creation that I made with Premiere Elements 13, but now 13 is refusing to work properly (space bar and play button do not move the time line indicator forward). Hopefully, I will get the problem solved, but in the meantime I must get this project completed and don't have time to start over. So, I need to convert the work so that it can be completed with Premiere 11 which seems to work fine.
Thanks, Dave

Dave
Is this an outdated thread? I thought that you had resolved the play button/space bar issue.
Classically, you cannot open a project created in a later version in an earlier version. If you try, you get hit with "The project appears to be damaged, it cannot be opened." messaged. There was one rare and little known occasion when that was not the case. It involved Premiere Elements 10. So, that is not going to help us any here.
If you still have the play button/space bar issue, can you get out of the 13 project by exporting it to file which you can import into a new Premiere Elements 11 project? If need be, I can suggest the details of that if you tell me the project setting for the 13 project.
Please let us know the situation at this time.
Thank you.
ATR

How can i activate 30 copies of Premiere Elements OFFLINE ?

How can i activate 30 copies of Premiere Elements OFFLINE ? I couldn't find a way. I have send an email to adobe. No reaction.

See if the (marked correct) answer by an Adobe Staff member in this discussion helps - Re: Silent install and activation of 50x copies of PhotoShop Elements 12 TLP (this is for Photoshop Elements, but I would expect the answer to be equally applicable to Premiere Elements).
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Can I import flash files into Premiere Elements 8

I want to use Google Motion charts in my video. Is this possible?

thanks for that info. I wil probably purchase it for myself -- but I wanted to test it first.
Date: Fri, 27 Aug 2010 10:41:01 -0600
From: [email protected]
To: [email protected]
Subject: Can I import flash files into Premiere Elements 8
One thing to point out, if you are doing this with the trial. While it is 100% (nothing crippled, or omitted), the trial WILL put a watermark on the finished Project. If you are doing this for work, be aware of that watermark. This http://forums.adobe.com/thread/433730?tstart=0 will give you some tips and background.
Good luck, and I do not want you to be surprised and mad, when you get that watermark.
Hunt
>

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
If so how do I accomplish this act?
Are their additional menus available for Encore CS4?

The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
Good luck,
Hunt
PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

Can't burn a DVD on Premiere Elements 12

At 98% media encoding the DVD is spit out and I get the following: internal software error:/premiere/elements/molecules/pre-mediacore/External/AuthorScript/Source
Any suggestions? I need the video for a class this week!

ATR,
Thank you for the reply and suggestions. I did some more researching and found a suggestion to remove the stop marker at the end of my video....and it worked! Apparently the stop marker causes an internal error. Mystery solved.
Thank you again for the ideas. I'm going to keep them on file for the next burn hic-up.
ibed
Date: Sat, 11 Jan 2014 22:12:58 -0800
From: [email protected]
To: [email protected]
Subject: Can't burn a DVD on Premiere Elements 12
    Re: Can't burn a DVD on Premiere Elements 12
    created by A.T. Romano in Premiere Elements - View the full discussion
ibed
What computer operating system is your Premiere Elements 12 running on?
Is this an external or internal burner?
Would you say that this is a case of "it worked before but not now" or "it never worked before"?
Although you cannot burn to disc DVD, can you burn your Timeline to folder. If so, the VIDEO_TS Folder from the burn to folder + ImgBurn to get your DVD-VIDEO on DVD disc may be your answer to this time crunch.
Let us start here and then decide what next depending on your answers.
Next step may be getting more information about your project settings and properties of your source media.
Could you post a screenshot of the error message that you are getting?
More details in the morning when we will be watch for your follow up.
Thanks.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6004504#6004504
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6004504#6004504
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6004504#6004504. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How can I move a picture in Premiere Elements 12 without having it leave a gap?

I have 133 pictures in a project with audio tracks playing while the pictures are being displayed. I want to move some of the pictures around. In Pinnacle Studio, a product I am familiar with, which unfortunately is not available on an iMac, I simply select a picture, drag it to where I want it, and presto - all done, no gaps, and the audio track (which I have locked) is not impacted. In Premiere Elements 12, when I move a picture, it leaves a gap of a black display where the picture was instead of shifting everything over like I assume most people would want it to do.
To make matters worse, Premiere then inserts a gap in the audio track at the location where I moved my picture. Apparently the software thinks I don't want the music to play over my picture at its new location. Then, when I try to select the blank area where my picture used to be and do "delete and close gap" it doesn't get rid of the entire gap.
I solved part of the problem by deleting the audio file, which I don't think I should have to do, but that's a function lacking in Premiere, not allowing me to lock the audio track. So now the "delete and close gap" will work with the audio gone, but is there a way to simply move a picture from one location to another and just adjust all the other pictures so as not to leave a gap?
Am I the only one who thinks that not leaving a gap should be the default? Why leave a gap just moving a picture from one location to another? If the intent was to add another picture later, you just slip it in place. I don't get it.
Thanks for any help anyone has.
Rick

Rick
Have you looked at Delete and Close Gap as well as Delete for what you describe?
Nonetheless, adding or moving clips to an existing Timeline content without disturbing the existing Timeline content can be challenging and complex under certain scenarios.
Typical solutions include making these moves with a keyboard modified held down (Windows Alt or Ctr). I am strictly an Elements Windows user, so we will need to find the Mac counterparts for the Windows keyboard modifier techniques.
Also, if one move triggers a multi-chain disaster, then you should consider grouping block of clips so that they do not move while you are busy with your Timeline maneuvers. Check out the Clip Menu options for Group and Ungroup.
Some times in the "Mac condition", you need to use fn in addition to the command to achieve some of these Windows counterparts.
The following video tutorial on arranging clips and keyboard modifiers is being posted for informational non promotional reasons.
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
It is demo'd with Premiere Elements 8, but the principles are the same for later versions of the program.
Here is one variation of the issue on Windows.
ATR Premiere Elements Troubleshooting: PE: Delete and Close Gap Failures
You should not have to delete audio to prevent it from being split by an addition to an existing Timeline. The keyboard modifiers should help you resolve this type of issue.
Please review and consider.
Thanks.
ATR

How to add a filter to Premiere Elements 9

Premiere Elements 9 is missing a timecode filter (like the kind found on Premier Pro CS5). Is it possible to add this filter (and others) to Premiere Elements 9? And how? And where would these video filters be? The trial seems to be working ok on my iMac i5. Need the timecode though...
Thanks, MG

There might be some plug-ins, but I use PrPro and AE, so I have that Effect in each. I like the control in AE better vs the TimeCode Effect in PrPro.
Good luck,
Hunt

I can't sign in to my premiere elements. it keeps saying there is an error 400

I can't sign in, it keeps saying that there is an error 400.

avquihuis6
What version of Premiere Elements are you using and on what computer operating system is it running?
I suspect that you are using a Premiere Elements version earlier than 11.
Those versions earlier than 11 are no longer associated with a Sign In. Ignore or cancel out of any messages that ask
you to Sign In. You will be able to import, edit, and export using the program.
The Sign In was associated with "photoshop.com" which has been discontinued within Premiere Elements 7, 8, 9, and 10.
Also note, that the photoshop.com plus members only content is no longer available.
The Error 400 matter is not a new one. How long have you been working with the program that is giving you this Error 400 message
today?
Please supply more details to help us help you.
Thank you.
ATR
Add On...More details on this later if necessary, do not misunderstand any program messages that you may encounter; you do
not have to join Adobe Revel in order to use your Premiere Elements 7, 8, 9, or 10 program.

I can't login to adobe form Premiere Elements 12

I've just Installed Premiere Elements 12 and when I first opened the program it asked me to login with my Adobe ID. So I did, the window disappeard and the workspace showed up, but when I watched under "help" I wasn't logged in and still can't get rid of the watermark. Any suggestions? I allready tried to deinstall-install but the same issue appeard.

zuettu
I understand what you are saying.....
You installed the program and after the restart you were greeted with a Sign In dialog to which you typed in your Adobe ID and password.
(For information for others, there is no request for a serial number in the Sign In dialog.)
The program then opened to the Premiere Elements 12 workspace. Great, that should mean that the program has been activated.
If that is the case, when you go to the Expert or Quick workspace, Help Menu/ you should see "Sign Out (your email address)".
What do you see?
If you are opening a project.prel file saved from the tryout version of the program in the purchased version, two things should happen
a. the program can automatically remove the watermark (happens for many of us)
or
b. the typically way, you go to Timeline Menu/Delete Rendered Files.
Please supply more details and then we can decide what next.
Thanks.
ATR
Add On...The following details the sequence of events for Premiere Elements 12 installation, especially with regard to place to enter serial number and filling in the Sign In dialog.
http://www.atr935.blogspot.com/2013/12/pe12-adobe-idpassword-requirement-for.html

Can I Add A TimeCode In Premiere Elements 9?

Similar Messages

Maybe you are looking for