Can I add any more memory to my Macbook or am I maxed out?
Can I add more memory, or is 4 gigs my max?
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP51.007E.B06
SMC Version (system): 1.33f8
Hardware UUID: C253F167-B468-5719-9F8C-0A70144AD421
Sudden Motion Sensor:
State: Enabled
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80CE
Part Number: 0x4D34373142353637334448312D4346382020
Serial Number: 0x4806C72C
BANK 0/DIMM1:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80CE
Part Number: 0x4D34373142353637334448312D4346382020
Serial Number: 0x4806C776
You can use this Link to check which RAM is suitable for your Mac... and how much you can Install...
http://eshop.macsales.com/shop/apple/memory/
It is Important to get the Correct and Matching RAM
For best performance, fill all memory slots, installing an equal memory module in each slot.
That site also has videos on how to Install RAM should you need it...
Here are Apples Instructions... Installing RAM
MBP http://support.apple.com/kb/ht1270
Similar Messages
-
My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? The ipod works fine and now i got a new computer. So it seems like my only options are leaving my ipod in a state where i cant add anymore songs or erasing all my songs and trying to use my ipod from my new computer. Can someone please inform me on how to have my ipod work from a different computer, even if i have to erase my songs. Thanks.
Yes, if you choose the Erase and Sync option (or restore your iPod) you will be allowed to sync your iPod with the new computer.
If you would like to save the content that's currently on your iPod, see this older thread from another forum member Zevoneer discussing the different ways to copy the content on an iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock -
So, I have had an Ipod touch (fourth generation) for a little less than a year now, and I have never had any problems with it until the latest version of itunes came out. Now, my ipod never can sync (I left it up for an hour before and it only got to step 2 out of 7), and I can't add any more music to my ipod! To make it worse, about 100 songs that I had deleted off my ipod, but could still be found in my itunes library, appeared again on my ipod! But, they are grayed out and I can't listen to them so they just take up space.
Any help would be very much appreciated. Thank you!Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I can't add any more columns. The option is suddenly greyed out.
I can't add any more columns. The option is suddenly greyed out.
Allen,
Actually, there is a TRANSPOSE Function, but no Command or Tool for that. It's one of the more useful and popular omissions in Numbers. Perhaps because it falls into the "didn't plan ahead so now I need a tool" category of features, it didn't make the cut.
Use of the Transpose Function is described in the Function Browser, the Help feature and in the Functions of Formulas User Guide PDF. It involves using the INDEX function to read out the array created by the Transpose function. Another way to do this is to use the OFFSET function in an expression and by exchanging the row and column references.
Yvan Koenig has written an Applescript that will automate the transposition for data and for certain simple expressions. You can get it from his Box Account, on this page.
Jerry -
Can't add any more buddies, but i always could, even over the limit..
On my iChat buddy list (on an AIM account), I have a lot over the 200 maximum, and it has always worked fine. I had almost 300 buddies, and then tried to add a few more. The first one worked, but the second two adds didn't. Is there a way to fix this other than deleting some buddies?
> I've got a site which is built entirely with AP Divs (in
CS3). Messy, but
> quick and easy.
You pay a serious price for the "quick and easy" part, buy
you may not be
aware of it yet.
> I've got to the stage now though, where I can't add any
more. I can draw
> the
> shape using the Draw AP Div tool, but as soon as I let
go of the mouse
> button,
> the box disappears (it doesn't get as far as becoming a
blue box).
There is no limit on the number of AP elements a page can
have.
> One thing I have noticed is that if I use design view to
delete an AP
> element,
> it doesn't seem to get removed from the code.
This would mean that you aren't really removing the element
from either
Design or Code view. If the code is there, the element is
there. If the
code is not there, the element is not there.
> Anyone got any ideas?
It would be hard to diagnose what might be happening without
seeing your
page and its code. Can you post a link?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"aliprior" <[email protected]> wrote in
message
news:ge1mjo$i4p$[email protected]..
> Hi,
>
> I've got a site which is built entirely with AP Divs (in
CS3). Messy, but
> quick and easy.
>
> I've got to the stage now though, where I can't add any
more. I can draw
> the
> shape using the Draw AP Div tool, but as soon as I let
go of the mouse
> button,
> the box disappears (it doesn't get as far as becoming a
blue box).
>
> I've checked that it's not hidden beneath another layer.
>
> One thing I have noticed is that if I use design view to
delete an AP
> element,
> it doesn't seem to get removed from the code.
>
> Anyone got any ideas?
>
> Thanks,
>
> A
> -
Hi,
I'm building a site for my husband which is built entirely
with AP Divs (in CS3). Messy, but quick and easy.
Never made a website before, so it's all a bit new to me!
I've got to the stage now though, where I can't add any more.
I can draw the shape using the Draw AP Div tool, but as soon as I
let go of the mouse button, the box disappears (it doesn't get as
far as becoming a blue box).
I've checked that it's not hidden beneath another layer.
One thing I have noticed is that if I use design view to
delete an AP element, it doesn't seem to get removed from the code.
Anyone got any ideas?
Thanks,
A> I've got a site which is built entirely with AP Divs (in
CS3). Messy, but
> quick and easy.
You pay a serious price for the "quick and easy" part, buy
you may not be
aware of it yet.
> I've got to the stage now though, where I can't add any
more. I can draw
> the
> shape using the Draw AP Div tool, but as soon as I let
go of the mouse
> button,
> the box disappears (it doesn't get as far as becoming a
blue box).
There is no limit on the number of AP elements a page can
have.
> One thing I have noticed is that if I use design view to
delete an AP
> element,
> it doesn't seem to get removed from the code.
This would mean that you aren't really removing the element
from either
Design or Code view. If the code is there, the element is
there. If the
code is not there, the element is not there.
> Anyone got any ideas?
It would be hard to diagnose what might be happening without
seeing your
page and its code. Can you post a link?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"aliprior" <[email protected]> wrote in
message
news:ge1mjo$i4p$[email protected]..
> Hi,
>
> I've got a site which is built entirely with AP Divs (in
CS3). Messy, but
> quick and easy.
>
> I've got to the stage now though, where I can't add any
more. I can draw
> the
> shape using the Draw AP Div tool, but as soon as I let
go of the mouse
> button,
> the box disappears (it doesn't get as far as becoming a
blue box).
>
> I've checked that it's not hidden beneath another layer.
>
> One thing I have noticed is that if I use design view to
delete an AP
> element,
> it doesn't seem to get removed from the code.
>
> Anyone got any ideas?
>
> Thanks,
>
> A
> -
Can't add any more to project--HELP!!!
I'm trying to make a slideshow-type movie in iMovie09 using mostly music, photos, and titles with a few videos. However, I'm 2 min. into the video, and it won't let me add any more photos or titles to my project. It will let me add video just fine, but nothing else. It won't let me expand the music after the pictures either. Is there a way to fix this, or is this just how iMovie works? I'm also having trouble selecting clips to edit that are already in my project. I will click on a clip, and it will come up with a window that says "no clip selected." I don't know if this is a related problem or not, but I need help--and FAST! project due tomorrow night. thanks.
This sounds like a corrupted database.
Option 1
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I only have 300 songs on my 8gb itouch and can't add any more-why
I only have 300 songs on my 8gb itouch and not that many apps or photos-why can't I add more
- What happens when you try to add/sync more music to the iPod? Error messages?
- What is listed in Settings>General>About>Available?
- When you click on the iPod under Deices in iTunes what is the distribution of the storage in the iPod shown in the clored bargraph? Is the "oth" larger than 1 GB? -
yesterday when i added some songs onto my ipod in itunes, it said the songs were there. i ejected my ipod and my songs werent there, i tried again and again and it still didnt work! it said C:\something itunes was unreadable or corrupted... i cant add any songs to my ipod, yet itunes says its there and i tried pressing update too......it keeps doin this every day.....anyone want to help? or have any information from previous experiences? please help!!
yesterday when i added some songs onto my ipod in
itunes, it said the songs were there. i ejected my
ipod and my songs werent there, i tried again and
again and it still didnt work! it said C:\something
itunes was unreadable or corrupted... i cant add any
songs to my ipod, yet itunes says its there and i
tried pressing update too......it keeps doin this
every day.....anyone want to help? or have any
information from previous experiences? please help!!
wat the... why did u copy what i said
yesterday when i added some songs onto my ipod in itunes, it said the songs were there. i ejected my ipod and my songs werent there, i tried again and again and it still didnt work! it said C:\something itunes was unreadable or corrupted... i cant add any songs to my ipod, yet itunes says its there and i tried pressing update too -
Can I add hard drive memory to my MacBook Pro (13" with retina display)?
I know I can use an external hard drive, but is there some way to add hard drive memory (either myself or taking it to an Apple store)?
OWC does offer internal storage upgrades which, depending upon the vintage of your MBP, may or may not be applicable:
http://eshop.macsales.com/shop/SSD/OWC/Air-Retina/Apple-MacBook-Pro-Retina-2012- Drive-Internal-Flash
Ciao. -
Can't add any more photos to iPhoto 09
This is a strange one. I've been using iPhoto for years, have 19,164 photos contained within a 134GB iphoto database.
Yesterday I was adding about 350 new photos to iphoto, all Nikon RAW format from a D700. Everything was imported fine, I created an event, did some basic enhancements, crops, etc, and then created a shared gallery on MobileMe. So far so good.
Then I closed iPhoto. Went back in later and the entire event was missing. All the photos are gone, except the MobileMe Gallery is still there as a folder (with nothing in it). The Last Import folder is also empty. I checked the mobileme web gallery address through Safari and the pics are still online.
(btw, I can't simply copy them back from the web gallery because I'm looking for the original NEFs (raw) files and the ones online are JPGs.
I figured this was a job for TimeMachine to solve, so I had the TimeMachine backup from approximately the time I finished entering them and I re-installed my iPhoto database overnight. When I opened iPhoto this morning, there was still nothing there.
Even though I had done several hours of post processing, I resolved to the fact that I would simply have to reinstall the original RAW files from the CompactFlash cards and start from scratch. The problem is that now whenever I import photos into iPhoto, whenever I close it and reopen it again, whatever I added is missing. I can't seem to add anything into iPhoto that will last past me closing the application.
Any ideas?
Thanks in advance
Jmac
The next thingThis sounds like a corrupted database.
Option 1
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Can't add any more music to iTunes
Help! I was going along great adding music to iTunes 11.0.0.163, then it just stopped. Tried adding files and folders (like I had been doing) and nothing more happened. Nothing new shows up in the Recently Added list. I have a Sony Vaio, Windows XP, SP3. Thanks for any tips!
the strange thing is that i can do about everything with windows media player with my same dvd burner paly cds and burn them but when i go to do the same with itunes i can't it imports the songs a sec per song and when i go to the librery to hear them they do the same thing a sec per song
-
Can I add 8gb of memory to my macbook 13 inch late 2009 model?
Is it possible to add 8gb of ram my mac, if the specs only say up to 4gb?
Maximum Memory
8.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 204-pin PC3-8500 (1066MHz) DDR3 SO-DIMM -
Hi, since I'm upgraded, I'm experiencing a wierd phenomenon... maybe someone can suggest a work around. I'd like to add a canon image runner through Canon IP. I go to add printers... click more printers. Select the canon protocol... enter the IP address... there are two buttons, one is cancel, one is add... Add is blue. As many times as I hit the add button, nothing happens. Any ideas? Thanks!
> I've got a site which is built entirely with AP Divs (in
CS3). Messy, but
> quick and easy.
You pay a serious price for the "quick and easy" part, buy
you may not be
aware of it yet.
> I've got to the stage now though, where I can't add any
more. I can draw
> the
> shape using the Draw AP Div tool, but as soon as I let
go of the mouse
> button,
> the box disappears (it doesn't get as far as becoming a
blue box).
There is no limit on the number of AP elements a page can
have.
> One thing I have noticed is that if I use design view to
delete an AP
> element,
> it doesn't seem to get removed from the code.
This would mean that you aren't really removing the element
from either
Design or Code view. If the code is there, the element is
there. If the
code is not there, the element is not there.
> Anyone got any ideas?
It would be hard to diagnose what might be happening without
seeing your
page and its code. Can you post a link?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"aliprior" <[email protected]> wrote in
message
news:ge1mjo$i4p$[email protected]..
> Hi,
>
> I've got a site which is built entirely with AP Divs (in
CS3). Messy, but
> quick and easy.
>
> I've got to the stage now though, where I can't add any
more. I can draw
> the
> shape using the Draw AP Div tool, but as soon as I let
go of the mouse
> button,
> the box disappears (it doesn't get as far as becoming a
blue box).
>
> I've checked that it's not hidden beneath another layer.
>
> One thing I have noticed is that if I use design view to
delete an AP
> element,
> it doesn't seem to get removed from the code.
>
> Anyone got any ideas?
>
> Thanks,
>
> A
> -
how can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card????please help
You can't. There is no memory card. It uses flash memory that's soldered to the logic board. If you didn't back it up, your data is gone.
Maybe you are looking for
-
IHistorian 3.1 UDS Not installing correctly
I am currently attempting to install the UDS for GE Historian 3.1 and am running into some issues. We have installed it a couple times on local test boxes with no issues, but at the customer site we can not get the installation to work correctly. A
-
User specific default variant in a selectio screen
Is it possible to provide an option to create user specific default variant in a selection screen? I have developed a custom report program. Now I want to allow users to choose one of their variants as default variant ? Please help.
-
Which Web Templates for printing and broadcasting
Hello, we are running NW2004S SP10 with the Portal. We are using the web template 0AnalysisPattern and within this Web Template is a button called Send (for Broadcasting) and another called Print Version (for generating a PDF-Document which can be sa
-
Hey, How to know number of rows and columns in alv grid are used.
-
Bridge CS6 - Output panel missing. OS X 10.9.2
I have Creative Suite CS6, Mac OS X 10.9.2 Bridge has lost Output Panel. I have had it before and it has worked well, now when I select files to the Output, right side of the screen is completly empy. I have started Bridge again, reset preferences an