Can I add mSATA into HP Envy TouchSmart 15-j003tx?

As stated in HP web site, the HP Envy TouchSmart 15-j003tx using Intel HM87 Express chipset but equipped with rather slow 5400 HDD.
I am planning to buy the notebook but would like to know if the notebook has extra slot for mSATA or extra SATA HDD slot so I may configure SSD caching for the notebook.
This question was solved.
View Solution.

ccy wrote:
As stated in HP web site, the HP Envy TouchSmart 15-j003tx using Intel HM87 Express chipset but equipped with rather slow 5400 HDD.
I am planning to buy the notebook but would like to know if the notebook has extra slot for mSATA or extra SATA HDD slot so I may configure SSD caching for the notebook.
Hi,
I have checked the manual for the laptop series again and your laptop supports mSATA cache. It says 24GB but I believe that a 256GB mSATA SSD will work. You may also install an Operating System on it and use a common hard drive as a data storage. Browse this forum, there are many threads about TS 15-j000 series laptops and mSATA options.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Similar Messages

Since iOS 5.0 upgrade can't add details into calender. Any ideas

Since iOS 5.0 upgrade, can't add details into calender. Any ideas

Update! I took some general advice on the forum and rebooted my iPhone a few times. I also asked the phone to "forget this device" and attempted to reconnect several times. It would load my contacts and then proceed to disconnect from the phone and I would also see a message on the Bluetooth page that the BlueAnt ST3 was not supported.
I gave up.
I left the two devices plugged into my computer for power overnight, laying side by side on the table.
They found each other. The next day they connected and have been communicating ever since.
Perhaps until the next IOS upgrade? But a happy ending in the interim

Can I add a second monitor to Touchsmart 520-1170a?

Can I add a second monitor to a Touchsmart 520-1170a?

Hi,
Please try one othe the following adapters:
http://www.amazon.com/StarTech-com-Multi-Monitor-External-Adapter/dp/B002FJQXXC
http://www.startech.com/usb-video-adapters
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why I can't add music into my ipad4 but can add music inti my iphone4?

I am having a problem with synchronizing music from itune to my ipad4. I ever syc from this itune into my iphone4 and it' had done. Recently, I bught an ipad and try to add music into it via itune but I can't do. I add music from Add to Library tab and then click syc. After synchronizing, no music in my ipad. If anyone knows about this problem, please advise me. Thanks.

I have disabled sync and instead add music and videos manually by first adding it to iTunes, and then drag and drop the files over to my iPad. You can always try this and see if it's working.

I can't add ringtones into itunes 12

hi, i just bought a new computer got my itunes 12 downloaded, than took me 2 days to download all my music, apps, movies, ect from itunes store back to my computer. than i had made some ringtones as .m4r files, but i can't drag them into itunes!!!!!! after i draged them into itunes, it appeared in the music lib, but not the ringtone lib, and i can't add them anyway doesn't matter if i change the file into .m4r or .m4a or .mp3, they all appeared in the music lib, and even if i sync my iphone with it, it will appear in my music but i can't see any of them in the settings=>sound=>ringtone.
even i deleted all the ringtone in itunes which was only one that was brounght on my phone (didn't know how it get there, i got other ringtones i purchased in my iphone, but they didn't got into itunes)
so here are two main questions:
1: how to add customised ringtone into itunes 12
2: how to add ringtones purchased from iphone into itunes 12

thank you, i tried them b4, not working.
but now the problem solved. i did the following:
1: change my itunes language settings back to english ( it was chinese b4)
2: close itunes than re open it
3: i downloaded a ringtone app on my iphone to allow me to customise the songs into ringtones on my iphone
4: sync my iphone
5: find the ringtones under my iphone's app in itunes sync
6: copy the tones in my computer
7:drag them back to my itunes ringtone lib,
all done~~~~ it took a few step, but at least it worked.
tried the change file format thing again, still not working

Can not play wav file on envy touchsmart

can not play wav files from my emails on my hp envy touchsmart. have tried to download other apps, but nothing is working. help!

Hi terrylyn11,
What media player apps have you tried to use to play these files? Are other music file formats playing ok?
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

Can I add fields into ACS 5.4 Certificate Dictionary?

Hi,
I need to check values in field that is not available in the ACS 5.4 certificate dictionary...
Can I add fields to it, or is it static?
Thanks,
Naor.

Hello Naor-
You can edit some of the built-in attributes but you can also add your own/custom attributes. Go to > System Administration > Configuration > Dictionaries > Protocol
Thank you for rating helpful posts!

Can't add movie into library

Hi, i'm new to using iphone, i can't seems to add any movie into my itunes library. Tried adding files of different formats, AVI etc, but nothing appeared on the library. Pls advise.

what kind of file is that ? if it is a .wmv file, you will have to convert it into an iTunes friendly format first.
JGG

I can't add files into the library!

For some reason i cannot add files or maps in the music library of itunes, when i click "add a file to the library" and i choose a music file(for example .mp3 or .m4a) it just doesn't show in the library so i cannot play anything in this program,
i tried on another laptop with vista and there where no problems at all!!
anyone knows a suggestion?

I'm also having similar problems on my parents Vista machine.
When an audio CD is inserted iTunes recognizes it, but once I try to play a track or import the CD iTunes goes through each track in about 1-2 seconds time, says that its done importing when it hasnt actually done anything. I uninstalled iTunes and downloaded a new fresh copy and the problem keeps happening. I ran the iTunes diagnostics tool on my Optical Drive and everything checks out. I opened up Windows Media Player and was able to rip audio tracks from the cd that way and was able to import the WMP ripped WMAs into iTunes, but this is too many steps for my parents to do (using iTunes alone is almost too many steps).

I can't add event into my ipad b'coz my plus was disappear

what should i do??? help me ,pls....

It's been suggested to either/both power down and power back up your iPad...hold the sleep button until you get the red slider, then power it back up. And 'reset' it by holding down both the home and the sleep button until you see the apple icon. The plus is still there but sometimes gets 'lost' in the upgrade and these steps can help make it visible again.

How can I add APPs into Launchpad?

I have both Adobe Photoshop CS6 and CC installed, but only CC shows in Launchpad

There are two ways to get an application to show up in the LaunchPad... one is to install the application in your Applications folder. This is where LaunchPad is looking for applications. It doesn't care if you got it through the App Store or if it's an Apple application or not. The second way is to drag the application over the LaunchPad icon residing on the dock and release it. This will create a symbolic link to the application without actually moving the application into the Applications folder. It has to be the application itself, not an installer for it, not a folder containing the application, the application. The application should be added to the LaunchPad if you don't rush it, hold it over the LaunchPad icon for a second or two.
Check to make sure it's not already in there... you won't see the LaunchPad dock icon do anything, you will just see the app you are dropping disappear. It could be on a second page. Click on the little dots when you launch LaunchPad to see if it's on one of the other pages.
If that didn't do the trick, try resetting LaunchPad (note that any applications or folders you created/added in LaunchPad will have to be recreated/added):
In Terminal, enter these two commands:
defaults write com.apple.dock ResetLaunchPad -bool true;killall Dock
then
defaults write com.apple.dock ResetLaunchPad -bool false;killall Dock
If that still isn't working, what is this app's name and where does it currently reside on your system?

How can I add jar files into the namespace in code?

My friends:
I need to add jar files into my namespace dynamicly in my code.But the jar files might be repeated, I am not sure.so, i wonder how can I add them into my namespace, ignoring the repeated files?
This is my code:
URL[] urlArrayA = new URL[5];
urlArray[0] = sample1;
urlArray[1] = sample2;
URL[] urlArrayB = new URL[5];
urlArrayB[0] = sample3;
urlArrayB[1] = sample4;
URLClassLoader urlClassLoaderA = URLClassLoader.newInstance(urlArrayA);
URLClassLoader urlClassLoaderB = URLClassLoader.newInstance(urlArrayB);
how can i visit classes in urlClassLoaderA from classes in urlClassLoaderB?

could anyone please answer the question for me ? thank you...

How to add data into JTable

How can I add data into JTable, for instance ("Mike", "Gooler", 21).

How can I add data into JTable, for instance ("Mike",
"Gooler", 21).You will have very good results if you segregate out the table model as a seperate user class and provide a method to add a row there. In fact, if you use the table to reflect a database table you can add the row inplace using the existing cursor. I believe it's TableExample2 in the jdk\demo\jfc\TableExamples that has a very good example of this.
Walt

How can I add movie to my iphon

how can I add movies into the iphone4?

The same way you sync anything else.
Open itunes connect iphone, go to the appropriate tab, select what you like and sync.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Is it possible to add a backlit keyboard to an hp envy touchsmart 15

is it possible to add a backlit keyboard to an hp envy touchsmart 15?

Daevid.
Yes you can.
Your manual here.
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
Page 20 chapter 3.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Can I add mSATA into HP Envy TouchSmart 15-j003tx?

Similar Messages

Maybe you are looking for