Can I Add or Edit Fields in iCal?
Hi,
I tried searching for this topic and could not find anything. My question is can one edit the fields in iCal? and 2, can one add fields in iCal?
If by "edit the fields" you mean change their labels, no. You can of course change the contents.
No.
AK
Similar Messages
-
Can't see "Add or Edit Fields" menu in Acrobat 9 Standard v9.5.2
I am trying to edit the fields of an Adobe form from one of my co-workers. We both are running Acrobat 9 Standard v9.5.2. She is able to see the Forms-->"Add or Edit Fields" menu, while I cannot.
I cannot get this menu item to show? Can someone tell me if there is an option or setting to enable so that I can get to this menu item?
Here is a screenshot of the form:
Here is a screenshot of the Adobe Acrobat version we are running:
Thanks,
TedFinally found a work around to my problem. Here are the steps:
(1) The original form. Note missing "Add or Edit Fields" menu item.
(2) Click on Document-->Extract Pages
(3) The following dialog pops up. Since I am only working with a 1 page form I accept the defaults and click OK.
(4) The following window is launched. Now I just save the newly generated form:
(5) Now when I check the Forms menu, I finally see the "Add or Edit Fields" item: Yay!!!!
(6) In checking the Document Properties of the new form, the Application (PScript5.dll) and PDF Producer (GPL Ghostscript 8.15) metadata is still the same as before:
Still don't know why I couldn't get to the "Add or Edit Fields" menu item in the original form. After doing the Extract, now I am able to get to it. At this point that's all I care about right now.
Thanks George for helping me investigate this issue!
Teo -
Can I add or edit Keywords and captions from within the Map module?
I frequently find a need to edit or add to the caption while reviewing and geotagging photos in the Map module. Constantly toggling between modules is inconvenient. Is there a way to add/edit captions or keywords while working in the Map module (or view the map module while working in the Library?
Thanks!
Stevethank you
From: Modesto Vega <[email protected]>
To: Steve Murray <[email protected]>
Sent: Thursday, January 29, 2015 3:27 PM
Subject: Can I add or edit Keywords and captions from within the Map module?
Can I add or edit Keywords and captions from within the Map module?
created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Text editing - can you add text editing options on the 'in-browser editing'
Text editing - can you add text editing options on the 'in-browser editing' tool?
You can only replace existing content, not edit the page structure. Refer to the respective help sections.
Mylenium -
hi,
sap gurus,
good morning to all,
how can i add STORAGE LOCATION field which is not in the standard tables namely
KOMP, KOMK, and KOMG.
how to include it in our FIELDS FROM FIELD CATALOGUE.
if we include this field is there any impact on the standard tables.
plz let me know this.
bcz
we are selling our products in two ways
(1). one is straight from factory ie direct sales from factory
if customer asks for excise invoice then we will sell thru factory and keeping freight in mind we will
deliver him which ever is economical either rail or road.
before coming to second case of selling the goods
we will do STOCK TRANSPORT ORDER from plant to different storage locations.
if we did STO thru road we have to sell the goods thru road only.
if we did STO thru rail we have to sell the goods thru rail route only.
(2). if the customer is not asking any excise invoice then we will send the goods thru depo/storage
location which is not registered under excise.
if the goods came by road then it will be delivered by road only.
if the goods came by rail then it will be delivered by rail only.
my logic here is
basing on the
storage location, transportation types, and distance i want to create condition record
that captures exact frieght at the sales order level.
confirm whether i am right or wrong.
regards,
balaji.t
09990019711.Hi,
It is not recommended to add new fields to any SAP standard tables. It disturbs the whole SAP functionality.
But if you have no choice expcept to change the standard tables to meet your requirement - then you need an access key to modify the object, which is available from the market place.
Nevertheless, the better option is to create a 'Z' table with the required fields and use that accordingly.
Changing standard tables will have serious impact when you apply patches or do an upgrade on the existing functionality.
REWARD POINTS IF HELPFUL
Regards
Sai -
HT5824 how can i add and edit my contatcs from my iphone
Hello please help me ..
how can i add and edit my contatcs from my iphoneHello there ttikkiscy,
It sounds like you would like to know how to add to and edit your iCloud Contacts. First make sure you are using the iCloud Contacts function with this article:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
On your iOS device’s Home screen, go to Settings > iCloud, then tap to turn on or off iCloud features.
Once that is turned on and you can see your contacts in the Contacts app, use this part of the iPhone Basics guide here http://support.apple.com/kb/TI138
Create and edit a contact.
In Contacts, tap + to pull up a new contact card. Enter the person’s info and tap Done.
To edit a contact, pull up the card and tap Edit. Make your changes and tap Done to save.
To delete, scroll down, and tap Delete Contact.
Thank you for using Apple Support Communities.
All the best,
Sterling -
How can I add the the field in the database in JSP?
How can I add the the field in the MS access using JSP?
By using JDBC.
http://java.sun.com/docs/books/tutorial/jdbc/index.html -
Can I add new compounding field in 0RT_VEND ?
Due to 0RT_VENDP_TEXT datasource has 3 keys (Language key, Vendor, Vendor Sub-Range) but 0RT_VENDP has 2 keys (Language key, Vendor Sub-Range) that maybe duplicate when 2 vendor have same Vendor Sub-Range code
Sample#1
Language key, Vendor, Vendor Sub-Range, Description
EN, 100, 20, Office product
EN, 200, 20, Office product
Sample#2
Language key, Vendor, Vendor Sub-Range, Description
EN, 100, 20, Office product
EN, 200, 20, Furniture product
My Question:
1. Can I add new compounding field in 0RT_VEND ? Best Solution ?
2. Each Vendor Sub-Range Code must same description ?? I don't know about Vendor Sub-Range concept
Help me please
Thank you very muchHi AJ,
Usually the vendor subrange (IS-R) should not have the double descriptions. Please check the Vendor subrange information below.
vendor subrange (IS-R):
A subdivision of the full range of products offered by a vendor (e.g. the Henkel company has the subranges "adhesives" and "washing powder").
Individual conditions apply for each individual subrange. If a vendor has subranges, each item offered by the vendor must be assigned to the appropriate subrange to enable the system to correctly determine the conditions for the subrange.
Regards,
Siva -
after updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?
At last, the BEST solution!
In addition to my last post, here is the solution for fixing this problem without syncing your contacts with icloud.
It takes about 2 minutes and permanently solves the problem so you can start adding and editing your contacts again on IOS 5.1.1!
Basically you just need to follow these steps from the Settings page:
Enable Airplane Mode
Go to iCloud settings
Turn on Contacts
Agree to 'Merge Contact'
Wait for pop up to confim iCloud contacts are on
Turn off Contacts
Confirm that you want to Keep your Contact on the iPhone
Wait for pop up to confim iCloud contacts are off
Disable Airplane Mode
Airplane Mode temporarily blocks all phone signal/data to stop your contacts merging with icloud.
Thanks to Washyman and Drewie77 for that info above! I got it from this post and it worked fine. -
Can not add or Edit in Address book
please help.
i can not add or Edit any thing on address book
Erro i am getting as below.
Uncaught Exception :
Application
net_rim_bb_addressbook_app (232) is not responding;
process terminated
Pls let me know what to do now.
Thanks
VInodHello Vinod and welcome to the Community!
Please remove Yahoo! Messenger or Windows Live Messenger for the meantime until a new update has been released because one of these apps' newly updated version is causing the issue to most OS5 phones...
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter -
After downloading iOS 5 I can't add or edit my contacts list.
After downloading iOS 5 I can't add or edit my contacts list. How do I get this functionality back?
Just do the following this seemed to work for me.
1. Settings
2. Select icloud
3. Turn contacts on
4. Come out of that and check for the add sign at the top right-hand corner of your contacs window
5. Go back into Settings, Icloud and switch it back off and select keep contacts
6. Voila your edit button should have stayed in the contact window -
How can we add multiple editable region in template
Hi,
My issue is when I am going to create a new template I want to add multiple editable region in template and I want to use those editable region per page wise so that in page editor I will add different text for each page for those editable region.
I can use incontxt editor to change those area for different pages although is it possible to use online editor to add different text for different pages.
I also have a plan to solve the issue ... that is also not working.
Plan is .. if we can use tag (not the default one in template), want to use different tag like {tag_headding},{tag_sidebarcontent} in template so that we can use those tag in template and fill the field in the page online editor, so when differnt page we will create we will fill those field for those tag and that will show in the front view of the site.
Please help me. I am really stuck on this issue.
Thanks in advance.
ProjjwalHi Projjwal,
Yes, if you look at many of the commercial BC templates available the way they are getting around it is with Content Holders and multiple templates.
Now I know you will say that multiple templates is high maintenance ..... not if you use Content holders for both recurring content and unique content.
Think of Conent Holders as 'Includes' ... I have been doing it this way with templates that I build from scratch as well. Easier than you think.
And that way the client can change content such as footer information or whatever that appears on all pages without editing the template itself.
Only drawback is that if you are using Design View in Dreamweaver the content holders don't render. But other than that Content Holders are awesome.
Brad -
How can I add a new field in selection screen for this report
*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
mseg,
mch1,
*mch1,
mkpf,
mchb ,
makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
wa_message_tab type esp1_message_wa_type ,
sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout type slis_layout_alv ,
gt_fldcat type slis_t_fieldcat_alv with header line,
gt_header type slis_t_listheader with header line,
gt_sortin type slis_t_sortinfo_alv with header line,
g_repid like sy-repid .
define add-fieldcat.
gt_fldcat-fieldname = &1.
gt_fldcat-ref_tabname = &2.
gt_fldcat-seltext_s = &3.
gt_fldcat-seltext_m = &3.
gt_fldcat-seltext_l = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
sel type xfeld,
matnr type matnr,
maktx type maktx,
charg type charg_d,
menge type menge_d,
erfmg type erfmg,
end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
gv_code like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
gv_matdoc type bapi2017_gm_head_ret-mat_doc,
gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = 'Z_ORAN'
importing
output = v_atinn.
call screen 100.
*& Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule. " status_0100 OUTPUT
*& Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
screen like screen,
index type i,
selected(1) type c,
vislength like icon-oleng,
invisible(1) type c,
end of cols.
case ok_code.
when 'DELE'.
delete itab where sel eq 'X'.
when 'ENTE'.
check *mch1-charg is not initial.
read table itab into witab with key charg = *mch1-charg.
if not sy-subrc is initial.
witab-charg = *mch1-charg.
select single matnr from mch1 into witab-matnr
where charg eq witab-charg.
if not syst-subrc is initial.
set cursor field '*MCH1-CHARG'.
message e115(12) with *mch1-charg.
endif.
select single maktx from makt into witab-maktx
where matnr eq witab-matnr
and spras eq syst-langu.
witab-erfmg = 1.
concatenate witab-matnr witab-charg into lv_objek .
clear ls_inob .
select single * into ls_inob
from inob
where objek = lv_objek and
klart = '023' and
obtab = 'MCH1' .
select single atflv from ausp into witab-menge
where objek = ls_inob-cuobj and
klart = '023' .
append witab to itab.
**added
clear *mch1-charg.
**added
endif.
when 'SAVE'.
if mkpf-budat is initial.
set cursor field 'MKPF-BUDAT'.
message e055(00).
endif.
if mseg-lgort is initial.
set cursor field 'MSEG-LGORT'.
message e055(00).
endif.
if mseg-umlgo is initial.
set cursor field 'MSEG-UMLGO'.
message e055(00).
endif.
if mseg-bwart is initial.
set cursor field 'MSEG-BWART'.
message e055(00).
endif.
refresh imseg.
loop at itab into witab.
move-corresponding witab to wmseg.
append wmseg to imseg.
endloop.
call function 'ZMM_POPUP_WITH_DATA'
exporting
imseg = imseg
importing
answer = answer.
if answer eq 'Y'.
perform create_goods_movement.
endif.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
set cursor field 'MARA-MATNR' line 1.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
set cursor field 'MARA-MATNR' line 1.
when 'P+'.
clear ok_code.
clear lines.
perform paging using 'P+'.
set cursor field 'MARA-MATNR' line 1.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
set cursor field 'MARA-MATNR' line 1.
when 'SORA'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab ascending by (field).
endif.
when 'SORZ'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab descending by (field).
endif.
when 'PRNT'.
perform write_alv.
endcase.
endmodule. " user_command_0100 INPUT
*& Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule. " read_table OUTPUT
*& Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule. " write_table INPUT
*& Module exit INPUT
module exit input.
leave to screen 0 .
endmodule. " exit INPUT
*& Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
i_goodsmvt_items-material = witab-matnr.
i_goodsmvt_items-entry_qnt = witab-erfmg.
i_goodsmvt_items-entry_uom = 'ST'.
i_goodsmvt_items-move_type = mseg-bwart.
i_goodsmvt_items-plant = mseg-werks.
i_goodsmvt_items-stge_loc = mseg-lgort.
i_goodsmvt_items-move_plant = mseg-umwrk.
i_goodsmvt_items-move_stloc = mseg-umlgo.
i_goodsmvt_items-batch = witab-charg.
append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
perform determine_bapi_code using mseg-bwart
changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gv_header
goodsmvt_code = gv_code
importing
goodsmvt_headret = gv_headret
materialdocument = gv_matdoc
matdocumentyear = gv_matyear
tables
goodsmvt_item = i_goodsmvt_items
return = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
exit.
endloop.
if sy-subrc ne 0.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wa_message_tab-msgid = 'M7'..
wa_message_tab-msgty = 'S'.
wa_message_tab-msgno = '060'.
wa_message_tab-msgv1 = gv_matdoc.
wa_message_tab-msgv2 = ''.
wa_message_tab-msgv3 = ''.
wa_message_tab-msgv4 = ''.
append wa_message_tab to i_message_tab.
else.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
loop at i_return.
wa_message_tab-msgid = i_return-id.
wa_message_tab-msgty = i_return-type.
wa_message_tab-msgno = i_return-number.
wa_message_tab-msgv1 = i_return-message_v1.
wa_message_tab-msgv2 = i_return-message_v2.
wa_message_tab-msgv3 = i_return-message_v3.
wa_message_tab-msgv4 = i_return-message_v4.
append wa_message_tab to i_message_tab.
endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
tables
i_message_tab = i_message_tab.
endform. " create_goods_movement
*& Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
select single gmcode from t158g into p_code
where tcode eq lt_t158b-tcode.
if sy-subrc is initial.
exit.
endif.
endloop.
endform. " determine_bapi_code
*& Form paging
form paging using code.
data: i type i,
j type i.
case code.
when 'P--'. tc_itab-top_line = 1.
when 'P-'.
tc_itab-top_line = tc_itab-top_line - line_count.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
when 'P+'.
i = tc_itab-top_line + line_count.
j = tc_itab-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tc_itab-top_line = i.
else.
tc_itab-top_line = j.
endif.
when 'P++'.
tc_itab-top_line = tc_itab-lines - line_count + 1.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
endcase.
endform. " paging
*& Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ''
i_callback_program = g_repid
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = gs_layout
it_fieldcat = gt_fldcat[]
it_sort = gt_sortin[]
tables
t_outtab = itab[].
endform. " write_alv
Form find_list_header
form find_list_header.
data : v_datum(10),
v_datlo(10),
v_dathi(10),
v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform. " find_list_header
Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform. " fill_field_cat
Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up = 'X'.
gt_sortin-fieldname = 'MATNR'. append gt_sortin.
endform. " fill_sortinfo
Form top_of_page *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ZKUTAS'
it_list_commentary = gt_header[].
endform. " top_of_pageHI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer -
Can't add a NEW EVENT to my iCal on my iMac- however the event is sync'd to my iPad with no problem. iCloud is turned on for iCal. Is this a Lion problem or something turned pff. I cannot find an answer. Help?
WilliamfronscWilliam,
It is a possibility that you are adding new events to your "On My Mac" calendars.
"On My Mac" calendars will not sync with iCloud. After backing up the "On My Mac" calendars, and ensuring that all events are duplicated on your iCloud calendars you can delete any "On My Mac" calendars.
For further troubleshooting advice read iCloud: Troubleshooting iCloud Calendar. -
Can I Add all the fields from POOL to EXTRACT Structure in LBWE
Dear Experts,
Our Client is asking to add all the fields in the POOL Table to EXTRACT STRUCTURE in LBWE that is he wants to add all the fields from Right Hand Side Table to Left Hand Side Table in the Maintenance of LBWE of all the SD Data Sources. For few fields there is no data even though they are saying that in the nearer future we are going to use all most all fields.
Like wise they are asking to add all the tables like VBAP, VBUP, VBAK, VBKD, VBUK, etc.,
My Questions are:
1.Is it advisable or recommended to add all the fields from POOL to Extract Structure because client desperately needs them.
2.Is there any performance issue when we add the fields from POOL to Extract Structure at the time of extracting data from R/3 to BI.
Regards,
Sai PhaniHi Sai,
1.Is it advisable or recommended to add all the fields from POOL to Extract Structure because client desperately needs them.
we can add all the fields from the POOL to Extract Structure, if really your business requires to pull all the data.
2.2.Is there any performance issue when we add the fields from POOL to Extract Structure at the time of extracting data from R/3 to BI.
Ofcourse, there will be performance matters, because we have to extract maximum number fields data to BI side. If we have data for all the fields in R/3, we may face performance problems like load takes long time.
Hope this helps.
Veerendra.
Maybe you are looking for
-
IDoc to Soap, with BPM - Permanent error in BPE inbound processing
Hi Experts, IDoc to Soap, with BPM - > Permanent error in BPE inbound processing How to rectify this any issue??? Thanks- sk
-
Nokia C3-01 Problem with Camera
Hi, The Camera of the this moble is slightly slow. While capturing any pose by pressing the click button. It does not capture the same pose rather the pose which comes after in fractions of second.
-
Hi All, I am using Planning V11 I wanted to display YTD data on webforms. Now the data is loaded at the month level and there is a requirement to see the values for YTD aswell. I wanted to know the best practices around calculating YTD data in planni
-
Hello Expert. We have the next excenary webservice -> XI -> idoc. We received one invoice in sap XI and I create the invoce in SAP/R3,.It's ok but now, the invoice have a digital sign and i need to save the invoice in the system. If i use the file ad
-
My CAM cannot see 2540 storage
Hello I Installed CAM 6.0 on my windows XP, I powered on my 2540 storage for the first time. and connect it to the same LAN that my laptop is connected to. when I try to register the array , the CAM cannot find it. I can ping to the storage using the