Can I add or edit Keywords and captions from within the Map module?

I frequently find a need to edit or add to the caption while reviewing and geotagging photos in the Map module. Constantly toggling between modules is inconvenient. Is there a way to add/edit captions or keywords while working in the Map module (or view the map module while working in the Library?
Thanks!
Steve

thank you
From: Modesto Vega <[email protected]>
To: Steve Murray <[email protected]>
Sent: Thursday, January 29, 2015 3:27 PM
Subject: Can I add or edit Keywords and captions from within the Map module?
Can I add or edit Keywords and captions from within the Map module?
created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

Can't access wireless channels 12 and 13 from within the UK

Hi,
I have a Macbook Pro 15" (latest model core i7) that I bought online. It's a US model.
When I am at work I am able to connect to the wireless network on channel 13. The wireless access point we have here is a Netgear and it has a "region" setting which is set to Europe.
When I'm at home I can't access my own wireless router (a belkin device) on channels 12 or 13. When configured to 12 or 13 the network doesn't show up in the list.
When I am connected to channel 13 at work, system profiler shows my Airport as being set to FCC locale and country code DE (germany). At home it always shows the country code as US.
Is there a way to fix this? It seems as if the router at work is somehow broadcasting the region to the macbook over the wireless network (perhaps along with the SSID?) which its then somehow validating in order to enable channels 12/13.
If anyone can tell me how to fix this or how to flash the airport to stay on the UK country code I'd be very grateful.
Thanks.

dmesg | grep -i cfg80211
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
However, iwlist f still shows:
wlan0 19 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 36 : 5.18 GHz
Channel 40 : 5.2 GHz
Channel 44 : 5.22 GHz
Channel 48 : 5.24 GHz
Channel 52 : 5.26 GHz
Channel 56 : 5.28 GHz
Channel 60 : 5.3 GHz
Channel 64 : 5.32 GHz
Current Frequency:2.457 GHz (Channel 10)

How can you add your own print and export buttons to the CR viewer toolbar?

I posted a previous question that was asking how to get around the Information Bar in IE7 when you export and print. Unfortunately the CR viewer file download code gets blocked by IE7 because the buttons don't directly download the file. However, I have been able to get a regular button that calls the following code and streams the file to the client and IE7 does not block it.
Sub PrintPDF(sender As Object, e As System.EventArgs)
     Dim crReportDocument as ReportDocument
     Dim crExportOptions as ExportOptions
     Dim crDiskFileDestinationOptions as DiskFileDestinationOptions
     Dim Fname as string
     CrReportDocument = New ReportDocument()
     CrReportDocument.Load(Server.MapPath("estactionlist.rpt"))
     Fname = Server.MapPath("./") & Session.SessionID.ToString & ".pdf"
     CrDiskFileDestinationOptions = New DiskFileDestinationOptions()
     CrDiskFileDestinationOptions.DiskFileName = FName
     CrExportOptions = crReportDocument.ExportOptions
     With crExportOptions
          .DestinationOptions = CrDiskFileDestinationOptions
          .ExportDestinationType = ExportDestinationType.DiskFile
          .ExportFormatType = ExportFormatType.PortableDocFormat
     End With
     CrReportDocument.Export()
     Response.ClearContent()
     Response.ClearHeaders()
                Response.AddHeader("content-disposition", "attachment;filename=test.pdf")
                Response.ContentType = "application/pdf"
                Response.Charset = ""
                Response.WriteFile(Fname)
                Response.Flush()
     Response.Close()
     System.IO.File.Delete(Fname)
End Sub
So here are my questions?
1. Is it possible to add a custom print control/icon to the CR viewer toolbar?
2. If one is not possible, then is it possible to override the CR viewer print and export buttons with your own subroutines like the one above?
I just want my page to look nice and hate to have print and export buttons outside of my CR viewer.
Thanks,
Kevin

It might be possible to replace the buttons in a windows app since you can retrieve the toolbar as a toolbar object in the winform viewer ( ToolStrip toolBar = (ToolStrip) crystalReportViewer1.Controls[3]; ) however with a web app, it's a lot more difficult.
The problem is that that you need to parse the Request string to try and figure out if the print / export button was clicked. The code below makes the print button disappear if you click it, so you should be able to modify it to call your custom printing / exporting code instead (You have to do this check in a postback)
        Dim I As Integer = 0
        If Request.Form.AllKeys.Length > 0 Then
            For I = 0 To Request.Form.AllKeys.Length - 1
                Response.Write(Request.Form.Keys(I).ToString & "<BR>")
                If Request.Form.Keys(I).ToString = "CrystalReportViewer2:_ctl2:_ctl2.x" Then
                    CrystalReportViewer2.HasPrintButton = False
                End If
            Next
       End If
Shawn

Can a user editable frame be created for "Notes" and emailed from within the app?

Hello,
I am super new to the digital publishing process. Our church has published devotional content for some time and this year we are taking those publications digital. One of the key aspescts to our design is for readers to be able to have space to write their own thoughts in the devotional.
I am not at all skilled in any sort of code or markup and I have tradtionally stuck to the visual side of production. So, I am wondering if there is a way to create a "Notes" frame within indesign that the user can email to themselves or save it in someother way from with in the app?
Below is a screen shot of the print edition so you can see the area I am refering to.

The CLASSPATH cannot be modified at runtime.
You can work around this by creating a URLClassLoader with the required CLASSPATH and using it to load your classes instead.

Can you programatically get at an xcontrol label from within the xcontrol?

I'm working on an XControl, and I have include a VI in the control project definition to do some of the crunching. In this VI I would like to use the Label Text assigned to this instance of the XControl. The goal is to have my XControl write some info out to file on UnInit and so if the programmer used two or more instances, I would need to tag the info with the control's lable to be able to identify which control it came from. Is it simple and I have missed it?

Perhaps I misunderstand your question but I think this is possible.
Inside the XControl's Facade.vi, you can get a reference (Refnum) to the XControl from the Container State. You can use this reference to get the label of the XControl (Label.text property). If you put it in the right event in the facade vi (I tried the timeout case, but any of the events should work), you can store it in Display State, so you don't need to get it each time.
If you need the XControls label in a vi that uses it, you can do so just as you would with any other control. Simply right click the terminal, and select create reference, and wire a Label.text property to it.
Regards,
Wiebe.

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would th yellow -sign. As you gather I am new to this program having only used Final Cut Express 4

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would the yellow -sign. I am new to this program having only used Final Cut Express 4 previously.
iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial version

Check System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.

After updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

after updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

At last, the BEST solution!
In addition to my last post, here is the solution for fixing this problem without syncing your contacts with icloud.
It takes about 2 minutes and permanently solves the problem so you can start adding and editing your contacts again on IOS 5.1.1!
Basically you just need to follow these steps from the Settings page:
Enable Airplane Mode
Go to iCloud settings
Turn on Contacts
Agree to 'Merge Contact'
Wait for pop up to confim iCloud contacts are on
Turn off Contacts
Confirm that you want to Keep your Contact on the iPhone
Wait for pop up to confim iCloud contacts are off
Disable Airplane Mode
Airplane Mode temporarily blocks all phone signal/data to stop your contacts merging with icloud.
Thanks to Washyman and Drewie77 for that info above! I got it from this post and it worked fine.

Can not add or Edit in Address book

please help.
i can not add or Edit any thing on address book
Erro i am getting as below.
Uncaught Exception :
Application
net_rim_bb_addressbook_app (232) is not responding;
process terminated
Pls let me know what to do now.
Thanks
VInod

Hello Vinod and welcome to the Community!
Please remove Yahoo! Messenger or Windows Live Messenger for the meantime until a new update has been released because one of these apps' newly updated version is causing the issue to most OS5 phones...
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Can I send Edited Photos and Video from Lightroom 5 to Premiere 11?

I am new to Lightroom 5 and love the product. Can I export edited Photos and Video from Lightroom to Premiere Elements 11? I need more flexibility than Lightroom offfers. I want to mix Photos then Videos with different music files and create a DVD. Thank You...Rory...

Also, can I load the Lightroom itself onto an external hard drive and keep all my images off my laptop? If I edit them, do the edits remain on my laptop regardless of where the originals reside. I think that's the issue that I'm running into with Aperture: edits stay on my laptop even though originals are on an external HD.
Your photos can be on any hard disk, internal or external or network. If they are stored on an external hard disk, then when you import them into Lightroom, you select the ADD option and the photo will remain on your external hard disk. The edits are stored in your Lightroom catalog (as opposed to "remain on my laptop"). Once you import photos into Lightroom, you no longer want to manage them (move, copy, delete) using your operating system. You do all photo management in Lightroom.
If you transfer the photos properly, your edits, cropping, metadata, etc. will transfer to Lightroom, but I will leave the details to some expert on Aperture.
If I could offer some advice, I don't think you want to just transfer SOME of your photos to Lightroom. In my opinion, you want ALL of your photos managed by Lightroom, and not some in application 1 and some in application 2. This makes your life much easier when trying to find your photos, you don't have to think "Is this photo in Lightroom or is this in Aperture?" (Note: this doesn't mean you have to import all the photos from Aperture into Lightroom in one HUGE operation; you can certainly do the importing in manageable sized groups)

Can not add or edit contact in his blackberry

my client has received a new blackberry, we set it up on the BES server, with Domino for mail service
before we do the enterprise activation, he was able to add or edit contacts in his blackberry.
after the enterprise activation, he can not edit or add a contact.
the options appear but when selected, nothing happens.
The user went back to his provider, and I think they reloaded the OS on it
on my side, I removed the server path and relative path where the address book file is so the address book is not synchronised with Lotus Notes.
anyone seen that kind of problem? anyone can help?
Thanks
Robert Goupil
IBMer
2nd level support

Hi,
I know this is an old thread with a recent response.
I had the same issue and I was able to solve it by downgrading my MSN Messenger.
I found a string where it describes MSN as being the issue with contacts. So either downgrade it or if you don't use it then remove it all together.
Hope this helps

After downloading iOS 5 I can't add or edit my contacts list.

After downloading iOS 5 I can't add or edit my contacts list. How do I get this functionality back?

Just do the following this seemed to work for me.
1. Settings
2. Select icloud
3. Turn contacts on
4. Come out of that and check for the add sign at the top right-hand corner of your contacs window
5. Go back into Settings, Icloud and switch it back off and select keep contacts
6. Voila your edit button should have stayed in the contact window

Text editing - can you add text editing options on the 'in-browser editing'

Text editing - can you add text editing options on the 'in-browser editing' tool?

You can only replace existing content, not edit the page structure. Refer to the respective help sections.
Mylenium

How can i add a new user and change user'password with javamail?

how can i add a new user and change user'password from a mailserver with javamail?
email:[email protected]

Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
if it is linux...u have to use some shell programming\
bye for now let me know if this guides you or if you need some more stuff.
bye

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with them?

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with the photo files?

What version of iPhoto and system are you running? On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
2 - It may take 2-3 attempts so don't give up after only one attempt.
OT

In my text messaging blog, I can't edit anymore and keep some of the text blog and delete the rest ? Any way to do this (like I could before the recent iOs 7 "upgrade"

In my text messaging blog, I can't edit anymore and keep some of the messages and delete others since the "upgrade" to iOs 7. Can I do this somehow?

Tap and hold on any message in the thread. Tap "More" in the pop up menu. Select the message(s) you want to delete. Tap the trash can in the lower left corner.

Can I add or edit Keywords and captions from within the Map module?

Similar Messages

Maybe you are looking for