Can I add these two VWIC2 modules on a Cisco 2801?

Hello all,
Can I add both of these modules on a Cisco 2801 running 12.4(3h)?
VWIC2-2MFT-T1/E1
and
VWIC2-2MFT-G703 
Thank you,
Nadeem

Thanks for the response, but it doesn't really address my question(s).
Obviously, if I were buying memory for the old iMac, I would buy the same speed as the one already in it.  However, I am not buying memory, I already have this spare faster memory.   Let me split the question in two:
1.  Will the faster memory work on the slower iMac?
2.  Can the faster memory damage the slower iMac?

Similar Messages

  • How can I combine these two DAQ tasks???

    I am using LabVIEW 11, Windows XP, cDAQ-9174 chassis, two NI-9205 modules.
    Please see my code for reference. I am very new so i will accept all suggestions.
    I am acquiring 12 volatage signals in a producer/consumer structure giving me a queue of 1-d array of waveform(dbl). Then I am acquiring 12 voltage signals in another loop giving me 2-d array of waveform(dbl).
    There is an issue creating the channels. How can I combine these two tasks?
    Thanks,
    ~Chris
    Attachments:
    WaveTest_6.2.vi ‏558 KB

    Hello chrisbe723,
    When you say that there is an issue creating the channels, are you getting a specific error message when running your code? Also are you referencing the same set of channels for the two DAQ task you are configuring?
    Paul-B
    Applications Engineer
    National Instruments

  • Can I open these two database simultaneously on a same system?

    I have cloned the current database using Oracle EM Clone tool on a same WinXP system. Can I open these two database simultaneously on a same system? If can, How can Iogin to another database(cloned database)?

    You should be able to start both databases if you did the cloning correctly.
    EM use RMAN duplicate to clone database. It's basically created a AUXILIARY database and duplicate target database into it.
    You must enter destination global name and instance name before proceed. What's instance name you entered?
    set your ORACLE_SID to that instance name and login.

  • How can I get these two results in two different columns?

    SELECT COUNT(attr_id)
    FROM pv_attribute
    WHERE port_id = 322;
    SELECT COUNT(attr_id)
    FROM pv_attribute
    WHERE port_id = 323;
    How can I get these two results in two different columns?
    Thanks

    So Jens made a tiny mistake with the column name... shame you couldn't be bothered to research Pivoting so you could have corrected the mistake (possibly it was deliberate *{:-) ) and learnt something.
    with pv_attribute as (select 16123 attr_id, 322 port_id from dual union all
                          select 16123 attr_id, 322 port_id from dual union all
                          select 19223 attr_id, 322 port_id from dual union all
                          select 11193 attr_id, 323 port_id from dual union all
                          select 13163 attr_id, 323 port_id from dual)
    -- end of test data setup
    select sum(decode(port_id, 322, 1, 0)) cnt_322,
           sum(decode(port_id, 323, 1, 0)) cnt_323
    from   pv_attribute
    where  port_id in (322, 323)

  • I am self employed and I want to be able to offer private tuition in PhotoShop and Illustrator, alongside Corel PaintShopPro and MS Office that I already teach. Can I get these two products, or all, at the 'educational' price?

    I am self employed and I want to be able to offer private tuition in PhotoShop and Illustrator, alongside Corel PaintShopPro and MS Office that I already teach. Can I get these two products, or all, at the 'educational' price?

    Not that I know. S&T pricing only applies to verified institutions. Could well be that you may need to fill out a paper with whatever governmental authority is responsible on the planet you live, but otherwise you're just a private business like any other and would most likely deduct the expenses from your tax bill...
    Mylenium

  • I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

    I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

    iTunes Store > Purchased > Music > Not on this computer.
    tt2

  • HT201365 My grand daughters are using my iPhones, can I add these to my account? With just the phone numbers?

    My grand daughters have my iPhones. Can I add these to my account by phone numbers?

    That is up to your carrier. Try contacting them.

  • A friend mailed me a flash drive with music on it from his pc...  mostly wma files.  How can I add these to my itunes library?

    My friend created a BIG music file on his pc then saved it to a flash drive.  It is mostly wma files..  how can I add this to itunes library?

    Install Flip4Mac's WM Components (from their download page), required to play WMA in QuickTime, the Finder's preview column, and many other applications -- but not iTunes!
    Open your WMA file in QuickTime Player (Pro version required), then save as reference movie.
    Drag the newly created .mov file onto iTunes. Now you can play it as you would any other song.
    Some metadata is copied to the QuickTime file, and you can edit/add tags in iTunes. Remember to keep the original WMA files in place, as your reference .mov files still point to them. If you don't mind one more conversion step, you can then liberate your WMAs within iTunes. Select your WMA songs in iTunes, go to the Advanced Menu, click Convert selection to MP3/AAC, then enjoy your music on the iPod.

  • I added extension: Print Friendly initial rev72.1 & Print/Print Preview 0.9 but they don't appear on the add on bar. How can I use these two?

    My OS is Windows 7 and I recently upgraded to Firefox 23.0.1 and then installed the extensions: Print/Print Preview 0.9 and Printfriendly initial rev 72.1. When I go to the add on manager they are listed and not disabled. Under Toolbars, the following are selected: Menu Bar, Navigation Tool Bar, Bookmarks Tool Bar, Add-On-Bar. I don't see any of my Extensions on the Add-On-Bar. At the bottom left of the browser window appears an "x" for closing the Add-On-Bar. There is nothing else showing.

    Print/Print Preview uses and appends to the default Print button that comes with Firefox. If you don't have that button, use the '''Restore Default Set''' button in the lower-right corner of the Palette.
    As far as Print Friendly, the AMO download page says that button is placed on the Add-on Bar by default. If it isn't there maybe "Restore ...." will fix it, and if not I would suspect a compatibility issue.
    Beyond that I can't help you, as I use the Print Edit extension which works fine with Print/Print Preview . I don't like Print Friendly due that extension using their website instead of doing the "editing" within the users browser. Potential security issues for me.
    Note, I have tried the Print Friendly bookmarklet which works very much like their extension, and after examining the code and having a person who I consider well-versed with JavaScript look at it - I decided to use Print Edit instead.

  • Can I add a two way trusted but in different forest domain to My existing Lync 2013 Topology !

    HI !
    We have an installed Lync 2013 Std Edt. setup and its working perfectly for one domain. Our network infrastructure ( LAN ) is being shared with our sister company. They have their own forest and domain and a two ways trust relationship with our domain. I
    want to add them in our Lync 2013 topology, is it possible ?? if yes, thn what are the requirements and which changes i need to consider.
    Response from experts would be greatly appreciated. 

    Yes, You must establish a two-way trust between the central forest and user forests to enable distribution group expansion when groups from user forests are synchronized as contacts to the central forest.
    Also you can refer below link
    http://technet.microsoft.com/en-us/library/gg670909%28v=ocs.14%29.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

  • Can I run these two display resolutions simultaneously?

    My early 2009 Mac Mini (MB463LL/A) is currently driving a 24" Dell display through the Mini DVI port at a resolution of 1920 X 1200. I plan to extend the desktop with a 20" display running at its optimal resolution of 1600 X 1200.
    I'm a little confused by the specs, however, which state that the Mac Mini "simultaneously supports up to 1920 by 1200 pixels on a DVI or VGA display… and up to 2560 by 1600 pixels on a dual-link DVI display using MiniDisplayPort to Dual-Link DVI Adapter…"
    I understand about the adapters. What's unclear to me is whether these specifications refer to the total resolution split between two displays or the max resolution per display.
    In other words, I'd like to run my 24" display at 1920 X 1200 and 20" display at 1600 X 1200 simultaneously. Can I?
    Thanks.
    Message was edited by: captainbligh

    Yes. The specs are for each physical port individually.

  • Can I connect these two Macs?

    For some time I've been trying to connect a Powerbook 520, running OS 7.1, to a G5, running Tiger 10.4.8 (also has Classic environment). Was hoping to type up some stuff in Word on the considerably more portable 520 and copy it over to the G5 when needed.
    I bought an AAUI to RJ45 transceiver and an ethernet crossover cable yesterday. Plug it all in today and this method doesn't seem to be working. The G5 can see it but says the AFP protocol is incorrect. Via Classic I go into AppleShare and it sees the Powerbook but I get an error each time. The Powerbook doesn't see the G5 at all.
    I also have a HDI 29/30 SCSI adapter and tried to hook up my CD burner and it said it needed 7.5 and later. Terrific! Not
    I have a dial-up modem for it too but have totally forgotten how to hook old Macs up to the internet.
    I'm trying to get around this in the cheapest way possible, but purchasing connector after connector is adding up $$$-wise, which is hard to justify on such an old computer... I won't rule out buying a USB floppy for the G5 but this is bordering on obsessiveness. Maybe I should just give up the whole idea...

    Mac OS X 10.4.x has certain limitations as far as file sharing with older systems is concerned. You may want to study posts made by Grant Bennet-Alder regarding this (e.g. here). With the correct software installed, you ought to be able to manage the connection from the PowerBook side.
    System 7.5.3 (for example, British and US) is available for download from Apple.
    System 7.5.3 contains the necessary TCP/IP files for the Internet. The modem (especially if internal) may require proprietary software (post back with type et cetera for additional information). An external modem will often work without special drivers. MacPPP 2.5.3 (here) will handle the PPP connection. Files can be transferred via email.
    It is also possible to connect two computers modem-to-modem (locally). See, for instance, KB article # 22229.
    If the PowerBook 520 is equipped with a PCMCIA expansion module, a CompactFlash memory card in a PC Card adapter (something like this one) will provide you with a fast alternative file transfer method (with a USB card reader attached to the other computer).
    Jan
    Message was edited by: Jan Hedlund

  • How can I add a two second pause to the beginning of each slide?

    Hello,
    I have a project with TTS and perfectly aligned CC notes - 64 slides.  Now the customer would like for there be a two-second pause before the audio begins on each slide in order to allow the user to first become oriented with the slide.  Is there a way I can do this without moving the audio down the timeline two seconds, and then having to adjust the appearance of each of the CC notes accordingly? 
    I was thinking of something like pause two seconds On Enter -- Is this possible?
    Thanks for any help!!
    Ryan

    VTML (VoiceText Markup Language) – This Powerful hidden gem in Text to Speech helps you control the generated speech by adding pause, changing the pitch etc !
    Please use the document linked below to get the more information on VTML tags and its usage.
    https://ondemand.neospeech.com/vt_eng-Engine-VTML-v3.9.0-3.pdf
    Regards,
    Rajeev.

  • I use Imax G4 10.4.11 and need to load Java 1.6.0_13 and Adobe Reader 9.4, but cannot on 10.4. Can I load these two items on your Firefox?

    I need the Java and the Adobe in order to continue to use my Scottrade Investment account. My current safari Panther account will not accommodate these Java and Adobe upgrades. The Apple tech advised trying Firefox.

    Firefox 3.5 is an antique version that is chock-full of security vulnerabilities.<br>
    Firefox 3.6 also contains security vulnerabilities; it stopped being supported on April 24.
    * [https://www.mozilla.org/security/known-vulnerabilities/ www.mozilla.org/security/known-vulnerabilities/]
    If you can't run the latest version because your system doesn't meet the requirements, it's highly recommended that you use another browser that is secure. TenFourFox is a third-party build of Firefox that is kept up-to-date and runs on Mac OS X 10.4 and PowerPC Macs (as a side note, I've never seen the site go down; whatever problems James noticed 9 months ago must've been a fluke).
    * [http://www.floodgap.com/software/tenfourfox/ www.floodgap.com/software/tenfourfox/]
    If your system can run the latest version, but you want to downgrade because you've experienced problems, please start a new thread and someone will try to help you.
    If you understand the security risks but want to downgrade anyway,
    * Firefox 3.6: [http://www.mozilla.com/firefox/all-older.html www.mozilla.com/firefox/all-older.html]
    * Firefox 3.5: [ftp://archive.mozilla.org/pub/mozilla.org/firefox/releases/3.5.19/ ftp://archive.mozilla.org/pub/mozilla.org/firefox/releases/3.5.19/]

  • How can I manage these two requirement in SLCM ?

    I have 2 conflict requirements on event offerring module.
    One is lock the user for set up the same resource (same room , same advisor , same date and same time) in difference SM.
    Another one is have to allow pair of SM to set up with the same resource (no need to lock)
    How can I manage this requirement ?
    BR
    Vo Cha.

    Hi Vorad,
    One is lock the user for set up the same resource (same room , same advisor , same date and same time) in difference SM.
    Colliding of resources is already taken care when you create events during event planning .
    Another one is have to allow pair of SM to set up with the same resource (no need to lock)
    You can set up a same resource provided the resouce should not collide with the same time .
    Eg : Lecturer A handling Maths at different sections , time .
    Note :
    Eg : For an year, session . Event Package design varies depend upon the university and it is very flexible .
    => Event Package has its own capacity , you can assign the events to the event package . Events are short term and it also has it own capacity .
    => But once the event package is booked for students , it cannot be modified .
    For more understanding :
    Event Planning :
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/2dfe2acd4d11d2abe700a0c943a389/frameset.htm
    Regards
    Gajalakshmi

Maybe you are looking for